RESUMO
This paper focuses on building a non-invasive, low-cost sensor that can be fitted over tree trunks growing in a semiarid land environment. It also proposes a new definition that characterizes tree trunks' water retention capabilities mathematically. The designed sensor measures the variations in capacitance across its probes. It uses amplification and filter stages to smooth the readings, requires little power, and is operational over a 100 kHz frequency. The sensor sends data via a Long Range (LoRa) transceiver through a gateway to a processing unit. Field experiments showed that the system provides accurate readings of the moisture content. As the sensors are non-invasive, they can be fitted to branches and trunks of various sizes without altering the structure of the wood tissue. Results show that the moisture content in tree trunks increases exponentially with respect to the measured capacitance and reflects the distinct differences between different tree types. Data of known healthy trees and unhealthy trees and defective sensor readings have been collected and analysed statistically to show how anomalies in sensor reading baseds on eigenvectors and eigenvalues of the fitted curve coefficient matrix can be detected.
RESUMO
Human Activity Recognition (HAR) systems are designed to read sensor data and analyse it to classify any detected movement and respond accordingly. However, there is a need for more responsive and near real-time systems to distinguish between false and true alarms. To accurately determine alarm triggers, the motion pattern of legitimate users need to be stored over a certain period and used to train the system to recognise features associated with their movements. This training process is followed by a testing cycle that uses actual data of different patterns of activity that are either similar or different to the training data set. This paper evaluates the use of a combined Convolutional Neural Network (CNN) and Naive Bayes for accuracy and robustness to correctly identify true alarm triggers in the form of a buzzer sound for example. It shows that pattern recognition can be achieved using either of the two approaches, even when a partial motion pattern is derived as a subset out of a full-motion path.
Assuntos
Algoritmos , Redes Neurais de Computação , Teorema de Bayes , Análise por Conglomerados , Atividades Humanas , HumanosRESUMO
In hostile and remote environments, such as mountains, forests or suburban areas, traditional communications may not be available, especially after a disaster, such as a flood, a forest fire or an earthquake. In these situations, the wireless networks may become congested or completely disrupted and may not be adequate to support the traffic generated by rescuers. It is also considered as the key tool in Corona Virus (COVID-19) battle. Moreover, the conventional approaches with fixed gateways may not work either, and this might lead to decoding errors due to the large distance between mobile nodes and the gateway. To avoid the decoding errors and improve the reliability of the messages, we propose to use intermediate Unmanned Aerial Vehicles (UAVs) to transfer messages from ground-based Long Range (LoRa) nodes to the remote base station (BS). Specifically, this UAV-enabled LoRa architecture is based on the ad hoc WiFi network, wherein, UAVs act as relays for the traffic generated between LoRa nodes and BS. To make the architecture more efficient, a distributed topology control algorithm is also proposed for UAVs. The algorithm is based on virtual spring forces and movement prediction technique that periodically updates the UAV topology to adapt to the movement of the ground-based LoRa nodes that move on the surface. The simulation results show the feasibility of the proposed approach for packet reception rate and average delay quality of service (QoS) metrics. It is observed that the mechanisms implemented in a UAV-enabled LoRa network effectively help to improve the packet reception rate with nominal buffer delays.
RESUMO
The Internet-of-things (IoT) has been gradually paving the way for the pervasive connectivity of wireless networks. Due to the ability to connect a number of devices to the Internet, many applications of IoT networks have recently been proposed. Though these applications range from industrial automation to smart homes, healthcare applications are the most critical. Providing reliable connectivity among wearables and other monitoring devices is one of the major tasks of such healthcare networks. The main source of power for such low-powered IoT devices is the batteries, which have a limited lifetime and need to be replaced or recharged periodically. In order to improve their lifecycle, one of the most promising proposals is to harvest energy from the ambient resources in the environment. For this purpose, we designed an energy harvesting protocol that harvests energy from two ambient energy sources, namely radio frequency (RF) at 2.4 GHz and thermal energy. A rectenna is used to harvest RF energy, while the thermoelectric generator (TEG) is employed to harvest human thermal energy. To verify the proposed design, extensive simulations are performed in Green Castalia, which is a framework that is used with the Castalia simulator in OMNeT++. The results show significant improvements in terms of the harvested energy and lifecycle improvement of IoT devices.
RESUMO
Heterogeneous networks are rapidly emerging as one of the key enablers of beyond fifth-generation (5G) wireless networks. It is gradually becoming clear to the network operators that existing cellular networks may not be able to support the traffic demands of the future. Thus, there is an upsurge in the interest of efficiently deploying small-cell networks for accommodating a growing number of user equipment (UEs). This work further extends the state-of-the-art by proposing an optimization framework for reducing the power consumption of small-cell base stations (BSs). Specifically, a novel algorithm has been proposed which dynamically switches off the redundant small-cell BSs based on the traffic demands of the network. Due to the dynamicity of the formulated problem, a new UE admission control policy has been presented when the problem becomes infeasible to solve. To validate the effectiveness of the proposed solution, the simulation results are compared with conventional techniques. It is shown that the proposed power control solution outperforms the conventional approaches both in terms of accommodating more UEs and reducing power consumption.
RESUMO
A compact, cylindrical dielectric resonator antenna (CDRA), using radio frequency signals to identify different liquids is proposed in this paper. The proposed CDRA sensor is excited by a rectangular slot through a 3-mm-wide microstrip line. The rectangular slot has been used to excite the CDRA for H E M 11 mode at 5.25 GHz. Circuit model values (capacitance, inductance, resistance and transformer ratios) of the proposed CDRA are derived to show the true behaviour of the system. The proposed CDRA acts as a sensor due to the fact that different liquids have different dielectric permittivities and, hence, will be having different resonance frequencies. Two different types of CDRA sensors are designed and experimentally validated with four different liquids (Isopropyl, ethanol, methanol and water).