A cross-sectional study of foot-ground clearance in healthy community dwelling Japanese cohorts aged 50, 60 and 70 years.

BACKGROUND: Falls-related injuries are particularly serious for older people, causing pain, reduced community engagement and associated medical costs. Tripping is the leading cause of falls and the current study examined whether minimum ground clearance (MFC) of the swing foot, indicating high tripping risk, would be differentiated across cohorts of healthy 50-, 60- and 70-years old community residents in Japan. METHODS: A cross-sectional population comprising the three groups (50s, 60s and 70s) of 123 Konosu City residents consented to be recorded when walking on an unobstructed surface at preferred speed. Gait biomechanics was measured using high speed (100 Hz) motion capture (OptiTrack - Natural Point Inc.), including step length and width, double support, foot contact angle and MFC (swing toe height above the ground). Multivariate Analysis of Variance (MANOVA) was used to confirm ageing effects on MFC and fundamental gait parameters. Pearson's correlations were performed to identify the relationships between mean MFC and other MFC characteristics (SD and SI), step length, step width, double support time and foot contact angle. RESULTS: Compared to 50s, lower step length was seen (2.69 cm and 6.15 cm) for 60s and 70s, respectively. No other statistical effects were identified for spatio-temporal parameters between the three groups. The 50s cohort MFC was also significantly higher than 60s and 70s, while step-to-step MFC variability was greater in the 70s than 50s and 60s. Pearson's correlations demonstrated that more symmetrical gait patterns were associated with greater MFC height, as reflected in greater symmetry in step width (50s), MFC (60s) and foot contact angle (70s). In the 70s increased MFC height correlated with higher MFC variability and reduced foot contact angle. CONCLUSIONS: MFC height reduces from 60 years but more variable MFC appears later, from 70 years. While symmetrical gait was accompanied by increased MFC height, in the 70s group attempts to increase MFC height may have caused more MFC variability and lower foot contact angles, compromising foot-ground clearance. Assessments of swing foot mechanics may be a useful component of community falls prevention.

General Mental Health Is Associated with Gait Asymmetry.

Wearable sensors are being applied to real-world motion monitoring and the focus of this work is assessing health status and wellbeing. An extensive literature has documented the effects on gait control of impaired physical health, but in this project, the aim was to determine whether emotional states associated with older people's mental health are also associated with walking mechanics. If confirmed, wearable sensors could be used to monitor affective responses. Lower limb gait mechanics of 126 healthy individuals (mean age 66.2 ± 8.38 years) were recorded using a high-speed 3D motion sensing system and they also completed a 12-item mental health status questionnaire (GHQ-12). Mean step width and minimum foot-ground clearance (MFC), indicative of tripping risk, were moderately correlated with GHQ-12. Ageing and variability (SD) of gait parameters were not significantly correlated with GHQ-12. GHQ-12 scores were, however, highly correlated with left-right gait control, indicating that greater gait symmetry was associated with better mental health. Maintaining good mental health with ageing may promote safer gait and wearable sensor technologies could be applied to gait asymmetry monitoring, possibly using a single inertial measurement unit attached to each shoe.

Modelling knee flexion effects on joint power absorption and adduction moment.

BACKGROUND: Knee osteoarthritis is commonly associated with ageing and long-term walking. In this study the effects of flexing motions on knee kinetics during stance were simulated. Extended knees do not facilitate efficient loading. It was therefore, hypothesised that knee flexion would promote power absorption and negative work, while possibly reducing knee adduction moment. METHODS: Three-dimensional (3D) position and ground reaction forces were collected from the right lower limb stance phase of one healthy young male subject. 3D position was sampled at 100 Hz using three Optotrak Certus (Northern Digital Inc.) motion analysis camera units, set up around an eight metre walkway. Force plates (AMTI) recorded ground reaction forces for inverse dynamics calculations. The Visual 3D (C-motion) 'Landmark' function was used to change knee joint positions to simulate three knee flexion angles during static standing. Effects of the flexion angles on joint kinetics during the stance phase were then modelled. RESULTS: The static modelling showed that each 2.7° increment in knee flexion angle produced 2.74°-2.76° increments in knee flexion during stance. Increased peak extension moment was 6.61 Nm per 2.7° of increased knee flexion. Knee flexion enhanced peak power absorption and negative work, while decreasing adduction moment. CONCLUSIONS: Excessive knee extension impairs quadriceps' power absorption and reduces eccentric muscle activity, potentially leading to knee osteoarthritis. A more flexed knee is accompanied by reduced adduction moment. Research is required to determine the optimum knee flexion to prevent further damage to knee-joint structures affected by osteoarthritis.