A New Method To Identify Physically Stable Concentration of Amorphous Solid Dispersions (I): Case of Flutamide + Kollidon VA64.

In this paper, a novel approach to determine stable concentration in API-polymer systems is presented. As a model, binary amorphous mixtures flutamide (FL) drug with a copolymer Kollidon VA64 (PVP/VA) have been used. It is worthwhile to note that finding an effective method to achieve this goal is a matter of great importance because physical stability of the amorphous pharmaceuticals is the key issue that is investigated worldwide. Due to the fact that molecular dynamics was found to be the crucial factor affecting physical stability of disordered pharmaceuticals, we examined it for both neat FL and its PVP/VA mixtures by means of broadband dielectric spectroscopy (BDS). Thorough investigation of the impact of polymeric additive on the molecular mobility of disordered FL reveals unusual, previously unreported behavior. Namely, simultaneously with the beginning of the recrystallization process, we observe some transformation from unstable supersaturated concentration of investigated mixture to the different, unknown concentration of FL-PVP/VA. Observed, during BDS experiment, transformation enables us to determine the limiting, highly physically stable concentration of FL in PVP/VA polymer (saturated solution), which is equivalent to FL + 41% wt. of PVP/VA. The described high physical stability of this unveiled system has been confirmed by means of long-term XRD measurements. According to our knowledge, this is the first time when such a behavior has been observed by means of BDS.

Toward a Better Understanding of the Physical Stability of Amorphous Anti-Inflammatory Agents: The Roles of Molecular Mobility and Molecular Interaction Patterns.

The aim of this article is to examine the crystallization tendencies of three chemically related amorphous anti-inflammatory agents, etoricoxib, celecoxib, and rofecoxib. Since the molecular mobility is considered as one of the factors affecting the crystallization behavior of a given material, broadband dielectric spectroscopy was used to gain insight into the molecular dynamics of the selected active pharmaceutical ingredients. Interestingly, our experiments did not reveal any significant differences in their relaxation behavior either in the supercooled liquid or in the glassy state. Hence, as a possible explanation for the enhanced physical stability of etoricoxib, its ability to undergo a tautomerization reaction was recognized. The occurrence of intramolecular proton transfer in the disordered etoricoxib was proven experimentally by time-dependent dielectric and infrared (IR) measurements. Additionally, IR spectroscopy combined with density functional theory calculations pointed out that in the etoricoxib drug, being in fact a binary mixture of tautomers, the individual isomers may interact with each other through a hydrogen bonding network. A possible explanation of this issue was achieved by performing dielectric experiments at elevated pressure. Since compression results in etoricoxib recrystallization, the possible influence of pressure on the observed stabilization effect is also carefully discussed.

Physical stability of the amorphous anticholesterol agent (ezetimibe): the role of molecular mobility.

The purpose of this paper is to examine the role of molecular mobility in the recrystallization process from the amorphous state of the anticholesterol drug ezetimibe. Both the molecular dynamics and crystallization kinetics have been studied using various experimental techniques, such as broadband dielectric spectroscopy (BDS), differential scanning calorimetry (DSC), and X-ray diffraction (XRD). Our investigations have shown that ezetimibe easily recrystallizes from the disordered state, both below and above its glass transition temperature (Tg = 336 K). Moreover, we found that an only slightly elevated pressure (5 MPa) significantly accelerates the recrystallization process at T > Tg. We predict that the structural relaxation time of amorphous ezetimibe at 293 K (storage temperature) and ambient pressure is only 22 days. This result corresponds to the characteristic time, determined from XRD measurements, for amorphous ezetimibe to recrystallize during storage at Troom = 298 K. It leads to the conclusion that the molecular mobility reflected in structural relaxation of ezetimibe is mainly responsible for devitrification of this drug. Finally, we determined a relatively easy way to improve the physical stability of the drug by preparing a binary amorphous ezetimibe-Soluplus mixture. Ezetimibe in an amorphous mixture with 20 wt % Soluplus has a much better (over six times) solubility than the pure crystalline material.

Molecular dynamics, physical stability and solubility advantage from amorphous indapamide drug.

This study for the first time investigates physicochemical properties of amorphous indapamide drug (IND), which is a known diuretic agent commonly used in the treatment of hypertension. The solid-state properties of the vitrified, cryomilled and ball-milled IND samples were analyzed using X-ray powder diffraction (XRD), mass spectrometry, nuclear magnetic resonance (NMR), infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC) and broadband dielectric spectroscopy (BDS). These analytical techniques enabled us (i) to confirm the purity of obtained amorphous samples, (ii) to describe the molecular mobility of IND in the liquid and glassy state, (iii) to determine the parameters describing the liquid-glass transition i.e. Tg and dynamic fragility, (iv) to test the chemical stability of amorphous IND in various temperature conditions and finally (v) to confirm the long-term physical stability of the amorphous samples. These studies were supplemented by density functional theory (DFT) calculations and apparent solubility studies of the amorphous IND in 0.1 M HCl, phosphate buffer (pH=6.8), and water (25 and 37 °C).

Molecular dynamics studies on the water mixtures of pharmaceutically important ionic liquid lidocaine HCl.

In this paper the molecular dynamics of a common local-anesthetic drug, lidocaine hydrochloride (LD-HCl), and its water mixtures were investigated. By means of broadband dielectric spectroscopy and calorimetric measurements it was shown that even a small addition of water causes a significant effect on the relaxation dynamics of analyzed protic ionic liquid. Apart from the two well-resolved relaxations (σ- and γ-processes) and the ß-mode, identified as the JG-process, observed for anhydrous LD-HCl, a new relaxation peak (υ) is visible in the dielectric spectra of aqueous mixtures of this drug. Additionally, the significant effect of the water on the glass transition temperature of LD-HCl was found. The sample characterized with mole fraction of water X(w) = 0.44 reveals the glass transition temperature T(g), 42 K lower than that of anhydrous material (307 K). Finally, it was shown that by amorphization of the hydrochloride salt of lidocaine it is possible to obtain its room temperature ionic liquid form.

Molecular dynamics at ambient and elevated pressure of the amorphous pharmaceutical: nonivamide (pelargonic acid vanillylamide).

Broadband dielectric spectroscopy was employed to investigate the relaxation dynamics of supercooled and glassy nonivamide-the synthetic form of capsaicin being the most spicy-hot substance known to man. The material is of great importance in the pharmaceutical industry because it has wide usage in the medical field for relief of pain, and more recently it has been shown to be effective in fighting cancers. Dielectric measurements carried out at various isobaric and isothermal conditions (pressure up to 400 MPa) revealed very narrow α-loss peak and unresolved secondary relaxations appearing in the form of an excess wing on the high frequency flank. Moreover, our studies have shown the shape of dielectric loss spectrum at any fixed loss peak frequency is invariant to different combinations of temperature and pressure, i.e., validity of the time-temperature-pressure superpositioning. We also found the fragility index is nearly constant on varying pressure. This property is likely due to the unusual structure of nonivamide, which has a part characteristic of van der Waals glass-former and another part characteristic of hydrogen-bonded glass-former.

Study of the amorphous glibenclamide drug: analysis of the molecular dynamics of quenched and cryomilled material.

Glibenclamide (GCM) is an oral hypoglycemic agent of the sulfonylurea group used in the treatment of non-insulin-dependent diabetes. Crystalline GCM is characterized by low bioavailability, which is attributed to its poor dissolution properties. It prompted us to prepare this drug in its amorphous form as a means to enhance its dissolution characteristics. Two different methods were used to convert crystalline GCM into the glassy form: quench-cooling of the melt and cryogenic milling. To monitor solid-state properties of the amorphous samples, X-ray powder diffraction (XRD), infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), ultraperformance liquid chromatography (UPLC) and spectroscopy, and broadband dielectric spectroscopy (BDS) were applied. The results of UPLC separations along with associated infrared and NMR measurements unambiguously showed that the thermal degradation of the quenched GCM, as suggested in literature reports, does not occur. A similar analysis performed on the cryomilled material also did not indicate any chemical decomposition. On the other hand, both methods confirmed that the conversion to the amorphous form is connected with the amide-imidic acid tautomerism of the examined drug. Moreover it was shown that this transformation occurs regardless of the manner of amorphization. Finally, dielectric spectroscopy was employed to study the molecular dynamics of vitrified GCM. The analysis of the ε''(f) in terms of the KWW function from the dielectric measurements revealed the existence of an "excess wing" attributed to the true Johari-Goldstein process based on Ngai's coupling model. The dielectric properties of GCM obtained in the amorphous form both by rapid cooling of the melt and the cryogenic grinding of crystalline sample were also compared.

Image analysis of chromatin in cells of reimplantation mouse embryos.

Mouse two-celled embryos and blastulae were Feulgen stained and the DNA content of their nuclei was measured with an integrating microdensitometer. The cells considered on the basis of their nuclear DNA content to be in G(1), S, and G(2) phases of the cell cycle were selected and their total chromatin area and chromatin areas at different gray levels were measured by the image analyzing computer, Quantimet. The measurements were aimed at quantitation of several features of the chromatin morphology of cells in different functional states. The total area of chromatin was found to increase, and the mean density of chromatin to decrease, from the G(1) to the G(2) phase of the cell cycle in both two-celled embryos and blastulae. The area of chromatin decreased, and the mean density of chromatin increased, as embryos developed from two-celled to blastula stage. It was concluded that nuclear morphology in preimplantation mouse embryos depends on both the phase of the cell cycle and the stage of development. The method of image analysis described was found to be useful for quantitation of changes in chromatin morphology.

Influence of the components of Kollicoat SR film on mechanical properties of floating pellets from the point of view of tableting.

The influence of pellet core ingredients on pellet behaviour, e.g. during compression, is well known. In this study the influence of components of a Kollicoat SR polymer film on mechanical properties was investigated. The aim of this study was to evaluate the influence of polymer film components on the mechanical properties of the pellet as a whole, from the point of view of tableting. Tablets should disintegrate into undeformed pellets floating in this environment for 5-6 h, releasing the model drug--verapamil hydrochloride--if possible in a controlled way. The usefulness of texture analysis and work of compression measurement was also evaluated. Kollicoat SR in the form of a 30D aqueous dispersion was chosen as the main component of the polymer film. Polyvinyl pyrrolidone K-30 as a pore former, and propylene glycol, triethyl citrate and dibutyl sebacate plasticisers were selected as typical additives. The influence of different thickness of polymer film on behaviour during stress was also evaluated. After coating the cores with a 20 microm Kollicoat SR dispersion film, an increase in mechanical strength, in comparison to the pellet core, was observed (2.74 to 3.34 mJ). Addition of porophor increased the work of compression by 50% to 5.1 mJ. The investigation of the influence of plasticiser on film properties proved that the kind of plasticiser used in the polymer film had no effect on the mechanical properties of the film or pellets. Only in the case of the film with triethyl citrate was no distinct of the pellet core found. Pellets coated both with films with triethyl citrate and with dibutyl sebacate, in contrast to pellets with a film coating with propylene glycol, showed a significant decrease of the dissolution rate of verapamil hydrochloride (20, 10 and 40% at 6 hours, respectively). It is possible to compress pellets with a 50 microm polymer film without affecting the dissolution rate, as was confirmed during release studies. When using Kollicoat SR the most appropriate plasticizer seems to be triethyl citrate, and in this case a change of behavior during compression analysis by texture analyzer was observed. But so relationship was found between the type of plasticizer and the work needed to obtain a given deformation.

Clinical and pharmacological evaluation of triazinate in humans.

Twenty-four patients with advanced solid tumors and seven with acute leukemia were treated with a triazine folate antagonist, triazinate, to determine the toxicity spectrum, the maximum tolerated dose, and the pharmacological disposition of the drug. Negligible toxicity was seen with single doses of 20 to 225 mg/sq m given as a 0.5-hr infusion. Single doses of 300 to 600 mg/sq m infused over 0.5 to 3 hr caused moderate to severe central neurological impairment with light headedness, somnolence, visual disturbances, weakness, and in one patient, severe respiratory distress and cyanosis. Skin, mucous membrane, and bone marrow toxicity were mild to moderate with single doses. When triazinate was given by a multiple-dose schedule every 12 to 24 hr, there was no neurological toxicity, but mucositis, skin toxicity, and myelotoxicity were increased. Five patients developed an erythematous to desquamative rash at the site of previous or concurrent radiotherapy. Serum disappearance of triazinate was at least bionsiderable variation from patient to patient. Single i.v. doses of 300 mg/sq m resulted in serum levels of 10(-5) M or higher for 8 hr and, with repeated doses, this level could be maintained. Administration p.o. resulted in serum concentrations less than 10% of that achieved after i.v. administration. Cerebrospinal fluid concentrations were 2% or less of the serum levels in five or six patients, 1 to 4 hr after i.v. treatment. Urinary excretion varied from 12 to 71% (median, 43%) of the total dose injected during the first 24 hr. Measurable objective solid tumor responses were not seen in this Phase 1 study, although two patients had stabilization of previously advancing disease. Decreases in peripheral blasts occurred in both types of acute leukemia, but improvement in the bone marrow was not observed.

Inhibition of DNA synthesis in normal and malignant human cells by triazinate (Baker's antifol) and methotrexate.

Triazinate (TZT), a triazine folate antagonist, is a potent inhibitor of dihydrofolate reductase from mammalian cells. Because antitumor activity of triazinate in experimental tumors correlated closely with the in vitro inhibition of DNA synthesis in tumor cells derived from these tumors, we studied cells from patients with leukemia, solid tumor effusions, and cells from normal marrow to determine their in vitro sensitivity to TZT. DNA synthesis in cells from patients with acute leukemia was less sensitive to TZT than it was to methotrexate (MTX) at 2 X 10(-6) M concentration of the inhibitor, whereas the sensitivity was similar at 10(-5) M. This could be accounted for by the known greater sensitivity of dihydrofolate reductase to MTX than to TZT, and the observation that, whereas intracellular drug levels were similar at low (2 X 10(-6) M) extracellular concentrations of TZT or MTX, at the higher (10(-5) M) extracellular drug concentration intracellular TZT was greater than 3 times intracellular MTX. In vitro inhibition of DNA synthesis in cells obtained after patients were treated with TZT was correlated with drug serum concentration and with leukemia cell kill. The sensitivity of cells from solid tumor effusions to TZT was similar to the sensitivity to MTX. Since patients can tolerate doses of TZT five times higher than MTX with less toxicity, there may be advantage to the clinical use of TZT in some tumor cell types.

Schedule-dependent antitumor effects of methotrexate and 5-fluorouracil.

The antitumor effects of methotrexate with 5-fluorouracil against the Sarcoma 180 mouse tumor model were found to be schedule dependent. Pretreatment of tumor-bearing animals with methotrexate significantly enhanced the antitumor activity of the combination relative to simultaneous treatment or to those with methotrexate following 5-fluorouracil. These studies indirectly support the hypothesis that methotrexate pretreatment with 5-fluorouracil is synergistic by increasing the amount of thymidylate synthetase bound to the active metabolite of 5-fluorouracil.

Pharmacology and toxicity of a potent "nonclassical" 2,4-diamino quinazoline folate antagonist, trimetrexate, in normal dogs.

The pharmacology of trimetrexate (JB-11, NSC 249008, 2,4-diamino-5-methyl-5-[(3,4,5-trimethoxyanilino)methyl]quinazoline), an antitumor agent effective against several mouse tumors, was studied in normal dogs. A high-performance liquid chromatographic technique with electrochemical detection, dihydrofolate reductase inhibition assay, and 14C-labeled drug were used to measure plasma disappearance, tissue distribution, excretion, and metabolism of the drug at doses from 0.5 to 6 mg/kg. Doses of 2 mg/kg were well tolerated without toxicity. Higher doses (3 to 6 mg/kg) produced mainly intestinal toxicity without significant hematological or liver abnormalities. The 6-mg/kg dose caused severe bloody diarrhea. After administration of 3 mg/kg, plasma concentrations of trimetrexate were 1 microM and were equal to or greater than 0.1 microM at 1 and 24 hr, respectively. The predominant pharmacokinetics of trimetrexate plasma disappearance was an elimination phase with a t1/2 of 3.5 hr. Concentrations in the cerebrospinal fluid were 2 to 5% of that in plasma and were maximum within 1 to 2 hr after i.v. administration. Highest tissue concentrations of drug were measured in liver and kidney; lowest were found in brain and lung. A dose equivalent to 3 mg/kg in humans (on a sq m basis) should produce adequate plasma concentrations (greater than 0.1 microM) for therapeutic effects.

Physicochemical properties of direct compression tablets with spray dried and ball milled solid dispersions of tadalafil in PVP-VA.

The aim of this research was to develop immediate release tablets comprising solid dispersion (IRSDTs) of tadalafil (Td) in a vinylpyrrolidone and vinyl acetate block copolymer (PVP-VA), characterized by improved dissolution profiles. The solid dispersion of Td in PVP-VA (Td/PVP-VA) in a weight ratio of 1:1 (w/w) was prepared using two different processes i.e. spray drying and ball milling. While the former process has been well established in the formulation of IRSDTs the latter has not been exploited in these systems yet. Regardless of the preparation method, both Td/PVP-VA solid dispersions were amorphous as confirmed by PXRD, DSC and FTIR. However, different morphology of particles (SEM) resulted in differences in water apparent solubility and disk intrinsic dissolution rate (DIDR). Both solid dispersions and crystalline Td were successfully made into directly compressible tablets at three doses of Td, i.e. 2.5mg, 10mgand20mg, yielding nine different formulations (D1-D9). Each of the lots met the requirements set by Ph.Eur. and was evaluated with respect to appearance, diameter, thickness, mass, hardness, friability, disintegration time and content of Td. IRSDTs performed as supersaturable formulations and had significantly improved water dissolution profiles in comparison with equivalent tablets containing crystalline Td and the marketed formulations. Tablets with both spray dried and ball milled Td/PVP-VA revealed the greatest improvement in dissolution depending on the investigated doses, i.e. 2.5mgand20mg, respectively. Also, dissolution of Td from Td/PVP-VA delivered in different forms occurred in the following order: powders>tablets>capsules.

Effects of methotrexate and of the "nonclassical" folate antagonist trimetrexate on human leukemia cells.

Twenty-five samples of fresh malignant cells of patients with acute leukemia (16 with acute myeloblastic leukemia, five with acute lymphoblastic leukemia, and four with chronic myelocytic leukemia in blast crisis) and of two patients with colon carcinoma were exposed for 1 hr to different concentrations of methotrexate (MTX) or trimetrexate (TMQ). In all samples, TMQ was at least one log more potent than MTX in inhibiting [3H]deoxyuridine incorporation into DNA. Cells relatively resistant in vitro to MTX also displayed decreased sensitivity to TMQ, although TMQ "resistance" was usually much less pronounced. In eight of the 25 leukemia samples, intracellular drug levels after exposure in vitro could also be measured. The intracellular levels of TMQ were 6 to 64 times higher than those of MTX, indicating that the difference in potency of these drugs may be related to the difference in intracellular accumulation. The intracellular levels of both agents varied widely and were not directly related to the degree of DNA synthesis inhibition. There was, however, a clear positive correlation between the intracellular ratio [TMQ]/[MTX] and the deoxyuridine incorporation after exposure to MTX. This observation suggests that 1) intracellular TMQ levels may be used as an internal standard to correct steady state intracellular MTX levels for variations such as cell size, and 2) in analogy to tissue-culture models, decreased intracellular accumulation of MTX may contribute to clinically encountered drug resistance.

Physical stability of solid dispersions with respect to thermodynamic solubility of tadalafil in PVP-VA.

The aim of this paper was to evaluate physical stability of solid dispersions in respect to the drug, tadalafil (Td), in vinylpyrrolidone and vinyl acetate block copolymer (PVP-VA). Nine solid dispersions of Td in PVP-VA (Td/PVP-VA) varied in terms of quantitative composition (1:9-9:1, w/w) were successfully produced by spray-drying. Their amorphous nature, supersaturated character and molecular level of mixing (a solid solution structure) were subsequently confirmed using DSC, PXRD, SEM and calculation of Hansen total solubility parameters. Due to thermal degradation of both components before the melting point of Td (302.3°C), an approach based on the drug crystallization from the supersaturated solid dispersion was selected to calculate the solubility of Td in the polymer. Annealing of the Td/PVP-VA solid dispersion (1:1, w/w) at selected temperatures above its Tg resulted in different stable solid dispersions. According to the Gordon-Taylor equation their new Tgs gave the information about the quantitative composition which corresponded to the thermodynamic solubility of Td in PVP-VA at given temperatures of annealing. The obtained relationship was fitted to the exponential function, with the calculated solubility of Td of 20.5% at 25°C. This value was in accordance with the results of hot stage polarizing light microscopy as well as stability tests carried out at 80°C and 0% RH, in which Td solid dispersions containing 10-20% of the drug were the only systems that did not crystallize within two months. A thermal analysis protocol utilizing a fast heating rate was shown to generate Td solubility data complementing the solid dispersion method. The Flory-Huggins model applied for the Td/PVP-VA system yielded the solubility value of 0.1% at 25°C, showing the lack of applicability in this case.

Physicochemical properties of tadalafil solid dispersions - Impact of polymer on the apparent solubility and dissolution rate of tadalafil.

To improve solubility of tadalafil (Td), a poorly soluble drug substance (3µg/ml) belonging to the II class of the Biopharmaceutical Classification System, its six different solid dispersions (1:1, w/w) in the following polymers: HPMC, MC, PVP, PVP-VA, Kollicoat IR and Soluplus were successfully produced by freeze-drying. Scanning electron microscopy showed a morphological structure of solid dispersions typical of lyophilisates. Apparent solubility and intrinsic dissolution rate studies revealed the greatest, a 16-fold, increase in drug solubility (50µg/ml) and a significant, 20-fold, dissolution rate enhancement for the Td/PVP-VA solid dispersion in comparison with crystalline Td. However, the longest duration of the supersaturation state in water (27µg/ml) over 24h was observed for the Td solid dispersion in HPMC. The improved dissolution of Td from Td/PVP-VA was confirmed in the standard dissolution test of capsules filled with solid dispersions. Powder X-ray diffraction and thermal analysis showed the amorphous nature of these binary systems and indicated the existence of dispersion at the molecular level and its supersaturated character, respectively. Nevertheless, as evidenced by film casting, the greatest ability to dissolve Td in polymer was determined for PVP-VA. The crystallization tendency of Td dispersed in Kollicoat IR could be explained by the low Tg (113°C) of the solid dispersion and the highest difference in Hansen solubility parameters (6.8MPa(0.5)) between Td and the polymer, although this relationship was not satisfied for the partially crystalline dispersion in PVP. Similarly, no correlation was found between the strength of hydrogen bonds investigated using infrared spectroscopy and the physical stability of solid dispersions or the level of supersaturation in aqueous solution.

High-dose chemotherapy with autologous stem cell transplantation is an effective treatment of primary refractory Hodgkin's disease. Retrospective study of the Polish Lymphoma Research Group.

We analysed the treatment outcome of primary refractory HD patients managed with high-dose chemotherapy and haematopoietic cell transplantation. Data of 65 adult patients who underwent HDC/ASCT in nine Polish centres for primary resistant Hodgkin's disease between June 1991 and July 2000 were collected retrospectively. Response rate to HDC/ASC: CR, 54%; PR, 20%; less than PR, 15%; early deaths, 11%. Actuarial 3-year OS and PFS were 55% and 36%, respectively. In multivariate analysis, lack of bulky lymph nodes and use of immunotherapy were favourable factors for both OS and PFS. IPF <3 at the time of transplantation was predictive for PFS. However, the prognostic impact of immunotherapy should be interpreted with caution since this group included more patients who achieved CR after HDC/ASCT. The results of HDC/ASCT are encouraging and confirm earlier findings. The role of immunotherapy should be further investigated in prospective trials.

Analysis of chromatin pattern in blood lymphocytes of healthy donors and in lymphoid cells of patients with chronic lymphocytic leukaemia.

The optical Fourier transformation was used to analyse the chromatin/interchromatin pattern of lymphocytes of healthy subjects and lymphoid cells of patients with chronic lymphocytic leukaemia (CLL, type B, stage O). Peripheral blood smears were prepared routinely, fixed, and stained by the Feulgen method, and the photographic images of the nuclei were quantitatively analysed. From the radial distribution of light intensity of diffractograms, several Feulgen chromatin (F-chromatin/interchromatin) descriptors were evaluated. Four showed the strongest discriminant power and these descriptors discriminated well between lymphocytes of healthy donors and lymphoid cells of CLL patients, although F-chromatin/interchromatin components of the same sizes were found in lymphocytes and lymphoid cells.

Effect of interferon and poly I: C on DNA fiber propagation in L 929 cells.

Autoradiographic analysis of DNA fiber replication was used to measure the rate of DNA propagation, the distances between initiation points of adjacent replicons and the direction of DNA propagation in L929 cells treated with either interferon or poly I: C, or untreated. Poly I:C ceased by 44% the rate of DNA propagation while the interferon had no effect. Poly I:C but not interferon reduced the mean distance between initiation points by 32%.