Prediction of Degradation Profiles for Various Sartans under Solvent-Free Mechanochemical Conditions.

For the approval of a drug, the stability data must be submitted to regulatory authorities. Such analyses are often time-consuming and cost-intensive. Forced degradation studies are mainly carried out under harsh conditions in the dissolved state, often leading to extraneous degradation profiles for a solid drug. Oxidative mechanochemical degradation offers the possibility of generating realistic degradation profiles. In this study, a sustainable mechanochemical procedure is presented for the degradation of five active pharmaceutical ingredients (APIs) from the sartan family: losartan potassium, irbesartan, valsartan, olmesartan medoxomil, and telmisartan. High-resolution mass spectrometry enabled the detection of impurities already present in untreated APIs and allowed the elucidation of degradation products. Significant degradation profiles could already be obtained after 15-60 min of ball milling time. Many of the identified degradation products are described in the literature and pharmacopoeias, emphasizing the significance of our results and the applicability of this approach to predict degradation profiles for drugs in the solid state.

Understanding adefovir pharmacokinetics as a component of a transporter phenotyping cocktail.

PURPOSE: Adefovir (as dipivoxil) was selected as a probe drug in a previous transporter cocktail phenotyping study to assess renal organic anion transporter 1 (OAT1), with renal clearance (CLR) as the primary parameter describing renal elimination. An approximately 20% higher systemic exposure of adefovir was observed when combined with other cocktail components (metformin, sitagliptin, pitavastatin, and digoxin) compared to sole administration. The present evaluation applied a population pharmacokinetic (popPK) modeling approach to describe adefovir pharmacokinetics as a cocktail component in more detail. METHODS: Data from 24 healthy subjects were reanalyzed. After establishing a base model, covariate effects, including the impact of co-administered drugs, were assessed using forward inclusion then backward elimination. RESULTS: A one-compartment model with first-order absorption (including lag time) and a combination of nonlinear renal and linear nonrenal elimination best described the data. A significantly higher apparent bioavailability (73.6% vs. 59.0%) and a lower apparent absorption rate constant (2.29 h-1 vs. 5.18 h-1) were identified in the combined period compared to the sole administration period, while no difference was seen in renal elimination. The population estimate for the Michaelis-Menten constant (Km) of the nonlinear renal elimination was 170 nmol/L, exceeding the observed range of adefovir plasma maximum concentration, while the maximum rate (Vmax) of nonlinear renal elimination was 2.40 µmol/h at the median absolute estimated glomerular filtration rate of 105 mL/min. CONCLUSION: The popPK modeling approach indicated that the co-administration primarily affected the apparent absorption and/or prodrug conversion of adefovir dipivoxil, resulting in the minor drug-drug interaction observed for adefovir as a victim. However, renal elimination remained unaffected. The high Km value suggests that assessing renal OAT1 activity by CLR has no relevant misspecification error with the cocktail doses used.

Antimicrobial effects of clindamycin-loaded platelet-rich fibrin (PRF).

OBJECTIVES: Recent research has demonstrated that platelet-rich fibrin (PRF) is an appropriate carrier for ampicillin/sulbactam. The aim of the study was to investigate whether PRF is also a suitable bio-carrier for clindamycin (CLI). METHODS: PRF membranes were produced from 36 patients receiving intravenous therapy with CLI (e.g. due to the diagnosis of an osteonecrosis of the jaw or infections). Concentrations of CLI in PRF membranes were measured with liquid chromatography-tandem mass spectrometry, and the antimicrobial effects were investigated in vitro in agar diffusion tests with fresh PRF and PRF stored for 24 h. Storage was performed in an incubator at 36 °C to simulate the in-vivo situation. RESULTS: The mean concentration of CLI in plasma was 1.0 ± 0.3 µg/100 mg plasma; in resulting PRF membranes 0.7 ± 0.4 µg/100 mg PRF. Agar diffusion tests were performed with Staphylococcus aureus, Streptococcus pneumoniae, Streptococcus mitis, Porphyromonas gingivalis, and Fusobacterium nucleatum. Mean inhibition zones, in mm, for fresh PRF were 17.3, 12.2, 18.8, 17.1, 25.8 and 18.1, 12.7, 19.2, 17.3, and 26.3 for stored PRF, respectively. CONCLUSION: The results demonstrate that PRF is a suitable bio-carrier for CLI when administered systemically to patients. The concentration in PRF generated from patients after infusion of 600 mg CLI dose suffices to target clinically relevant bacteria. CLINICAL RELEVANCE: Using PRF as a carrier for local antibiotic application can prevent infections in oral and maxillofacial surgery. Within the study limitations, the findings could expand the scope of PRF application by adding CLI as a new antibiotic to the spectrum of PRF therapy.

Targeted and untargeted screening for impurities in losartan tablets marketed in Germany by means of liquid chromatography/high resolution mass spectrometry.

Technical advances in the field of quality analysis allow an increasingly deeper look into the impurity profile of drugs. The ability to detect unexpected impurities in addition to known impurities ensures the supply of high-quality drugs and can prevent recalls due to the detection of harmful unexpected impurities, as has happened recently with the N-nitrosamine and azido impurities in losartan (LOS) drug products. In the present study, the LC-MS/HRMS approach described by Backer et al. was applied to an even more complex system, being the investigation of 35 LOS drug products and combination preparations purchased in 2018 and 2022 in German pharmacies. The film-coated tablets were analysed by means of four LC-MS/HRMS method variants. For the separation a Zorbax RR StableBond C18 column (3.0 ×100 mm, particle size of 3.5 µm, pore size of 80 Å), a gradient elution and for mass spectrometric detection a qTOF mass spectrometer with electrospray ionization in positive and negative mode was used. An information-dependent acquisition method was applied for the acquisition of high-resolution mass spectrometry data. The combination of an untargeted and a targeted screening approach revealed the finding of eight impurities in total. Beside the five LOS related compounds, LOS impurity F, J, K, L, M, and related compound D from amlodipine besilate, LOS azide and an unknown derivative thereof were detected. Identification and structure elucidation, respectively, were successfully performed using in silico fragmentation. Differences in the impurity profiles of drug products from 2018 and 2022 could be observed. This study shows that broad screening approaches like this are applicable to the analysis of drug products and can be an important enhancement of the quality assurance of medicinal products.

Application of advanced high resolution mass spectrometric techniques for the analysis of losartan potassium regarding known and unknown impurities.

Recalls of medicinal products can cause supply bottlenecks. This is often due to the findings of unexpected impurities that pose a health risk to patients. A recent example is losartan potassium which was contaminated with azido-impurities. The choice of the analytical method determines which substances can be detected and thus controlled. In this study a combination of an untargeted screening approach for impurities and a targeted evaluation of high-resolution mass spectrometry data was applied to search for impurities not described so far, leaving out a precise quantification. Six losartan potassium samples were studied regarding known and unknown impurities and hence highlight the applicability and capability of the approach. For separation a Zorbax RR StableBond C18 column (3.0 ×100 mm, particle size of 3.5 µm, pore size of 80 Å), a gradient elution and an electrospray ionization in positive and negative mode for mass spectrometric detection was used. An information-dependent acquisition method was applied for the measurement of losartan potassium samples. The untargeted data evaluation using general unknown comparative screening revealed the presence of N-methyl-2-pyrrolidone (NMP) and another impurity from synthesis. The identity of NMP was corroborated by a spiking experiment and the amount was estimated by means of standard addition. A targeted data evaluation by generating extracted ion chromatograms resulted in finding of four additional impurities. Combined approaches like this are needed to detect and respond to changes in the quality of drugs precociously.

Investigation of clindamycin concentrations in human plasma and jawbone tissue in patients with osteonecrosis of the jaw: A prospective trial.

The aim of this study was to investigate the jawbone concentration of clindamycin (CLI) in patients with an osteonecrosis of the jaw (ONJ). Patients with medication-related ONJ (MRONJ) and osteoradionecrosis (ORN) with an antibiotic treatment with CLI were included. Plasma, vital and necrotic bone samples were collected. Plasma and jawbone samples were analyzed by liquid chromatography-tandem mass spectrometry. Patients with MRONJ exhibited a mean plasma CLI concentration of 9.6 µg/mL (SD ± 3.6 µg/mL) and mean concentrations of 2.3 µg/g CLI (SD ± 1.4 µg/g) and 2.1 µg/g CLI (SD ± 2.4 µg/g) in vital and necrotic bone samples, without statistical significance (p = 0.79). In patients with ORN, mean concentration in plasma was 12.0 µg/mL (SD ± 2.6 µg/mL), in vital bone 2.1 µg/g (SD ± 1.5 µg/g), and in necrotic bone 1.7 µg/g (SD ± 1.2 µg/g). Vital and necrotic bone concentrations did not differ significantly (p = 0.88). The results demonstrate that CLI concentrations are considerably lower than in plasma, but sufficient for most bacteria present in ONJ. Within the limitations of the study, it seems that CLI is a relevant alternative to other antibiotics in the treatment of ONJ because it reaches adequate concentrations in jawbone.