Grating assisted glass fiber coupler for mode selective co-directional coupling.

To keep pace with the increasing demand of transmission capacity, space division multiplexing technologies are currently intensively investigated. In this context, mode selective glass fiber couplers are of great interest due to their compatibility with existing glass fiber networks. In this work, we present a novel type of mode selective glass fiber coupler for co-directional coupling based on fiber gratings and fused asymmetric fibers. The achieved mode selective coupling efficiency agrees well with numerical simulations performed for comparison. The benefits of the grating approach are a lower mode crosstalk and a simple adaption of the propagation constants through changing of the grating-period.

Long-Period Gratings in Highly Germanium-Doped, Single-Mode Optical Fibers for Sensing Applications.

Long-period fiber gratings (LPGs) are well known for their sensitivity to external influences, which make them interesting for a large number of sensing applications. For these applications, fibers with a high numerical aperture (i.e., fibers with highly germanium (Ge)-doped fused silica fiber cores) are more attractive since they are intrinsically photosensitive, as well as less sensitive to bend- and microbend-induced light attenuations. In this work, we introduce a novel method to inscribe LPGs into highly Ge-doped, single-mode fibers. By tapering the optical fiber, and thus, tailoring the effective indices of the core and cladding modes, for the first time, an LPG was inscribed into such fibers using the amplitude mask technique and a KrF excimer laser. Based on this novel method, sensitive LPG-based fiber optic sensors only a few millimeters in length can be incorporated in bend-insensitive fibers for use in various monitoring applications. Moreover, by applying the described inscription method, the LPG spectrum can be influenced and tailored according to the specific demands of a particular application.

Autofocusing system for spatial light modulator-based maskless lithography.

To produce diffractive or holographic structures in a photolithographic process, an optical projection system enabling structure resolution in the submicrometer range is highly desirable. To ensure that the optical focus of such a system lies on the substrate surface during the whole lithographic fabrication process, an autofocus system able to focus on a depth of field of a few hundred nanometers is usually required. In this work, we developed an autofocus system for spatial light modulator (SLM)-based maskless photolithographic applications. The system is capable of high-precision focusing without affecting the photoresist performance. It is based on contrast measurement combined with focus-pattern illumination to ensure high contrast at the substrate surface. In addition, we evaluated various autofocus algorithms with respect to time efficiency and accuracy to determine suitable focus-pattern and focus-algorithm combinations.

Flexible, fast, and low-cost production process for polymer based diffractive optics.

The generation of diffractive optical elements often requires time and cost consuming production techniques such as photolithography. Especially in research and development, small series of diffractive microstructures are needed and flexible and cost effective fabrication techniques are desirable to enable the fabrication of versatile optical elements on a short time scale. In this work, we introduce a novel process chain for fabrication of diffractive optical elements in various polymers. It is based on a maskless lithography process step, where a computer generated image of the optical element is projected via a digital mirror device and a microscope setup onto a silicon wafer coated with photosensitive resist. In addition, a stitching process allows us to microstructure a large area on the wafer. After development, a soft stamp of the microstructure is made from Polydimethylsiloxane, which is used as a mold for the subsequent hot embossing process, where the final diffractive optical element is replicated into thermoplastic polymer. Experimental results are presented, which demonstrate the applicability of the process.

Light source design for spectral tuning in biomedical imaging.

We propose an architecture with a remote phosphor-based modular and compact light-emitting diode (LED) light source in a noncontact dermoscope prototype for skin cancer screening. The spectrum and color temperature of the output light can easily and significantly be changed depending on spectral absorption characteristics of the tissues being imaged. The new system has several advantages compared to state-of-the-art phosphor converted ultrabright white LEDs, used in a wide range of medical imaging devices, which have a fixed spectrum and color temperature at a given operating point. In particular, the system can more easily be adapted to the requirements originating from different tissues in the human body, which have wavelength-dependent absorption and reflectivity. This leads to improved contrast for different kinds of imaged tissue components. The concept of such a lighting architecture can be vastly utilized in many other medical imaging devices including endoscopic systems.