IL-13 and IL-13-induced periostin levels are specifically decreased in patients following endoscopic sinus surgery for chronic rhinosinusitis.

BACKGROUND: Type 2 (T2) inflammation plays a pathogenic role in chronic rhinosinusitis (CRS). The effects of endoscopic sinus surgery (ESS) on T2 inflammation are unknown. OBJECTIVE: The aim of this study was to compare T2 inflammatory biomarkers from middle meatal (MM) mucus for distinguishing patients with CRS from CRS-free patients, identifying major phenotypes (CRS without nasal polyps [CRSsNP] and CRS with nasal polyps [CRSwNP]), assessing endotypic change, and establishing cross-sectional and longitudinal outcomes in patients undergoing ESS. METHODS: MM mucus samples were collected from patients with CRSsNP and patients with CRSwNP before and 6 to 12 months after ESS and compared with samples from CRS-free control patients. T2 biomarkers were evaluated both continuously and using threshold-based definitions of T2 endotype to identify relationships with patient-reported (based on the 22-Item Sinonasal Outcomes Test and Chronic Rhinosinusitis Patient-Reported Outcomes Measure) and clinician-reported (radiographic and endoscopic) severity. Linear mixed models were developed to analyze clinical variables associated with T2 biomarker levels. RESULTS: A total of 154 patients with CRS (89 with CRSsNP and 65 with CRSwNP) were enrolled, with a mean interval of 9 months between ESS and follow-up. An analysis of pre-ESS MM mucus samples revealed elevated levels of T2 mediators in patients with CRSwNP versus in patients with CRSsNP and CRS-free controls. Temporally stable correlations between levels of IL-13 and IL-5, levels of periostin and complement 5a, and levels of eosinophil cationic protein (ECP) and eotaxin-3 were observed. On this basis and on the basis of pathologic significance, levels of IL-13, periostin and ECP were further analyzed. After ESS, levels of IL-13 and periostin decreased significantly, whereas ECP levels remained unchanged. Across pre- and post-ESS evaluation, the T2 endotype was associated with radiographic severity but did not predict outcomes. CRSwNP status and African American race were associated with higher levels of IL-13 and periostin, whereas ECP level was higher in patients undergoing extensive surgery. CONCLUSION: ESS decreased levels of IL-13 and periostin in the middle meatus. T2 inflammation after ESS was correlated with patient- and clinician-reported severity across phenotypes. Pre-ESS T2 inflammation did not predict post-ESS outcomes.

Type 1 Autoimmune Pancreatitis in Europe: Clinical Profile and Response to Treatment.

BACKGROUND & AIMS: Autoimmune pancreatitis (AIP) is an immune-mediated disease of the pancreas with distinct pathophysiology and manifestations. Our aims were to characterize type 1 AIP in a large pan-European cohort and study the effectiveness of current treatment regimens. METHODS: We retrospectively analyzed adults diagnosed since 2005 with type 1 or not-otherwise-specified AIP in 42 European university hospitals. Type 1 AIP was uniformly diagnosed using specific diagnostic criteria. Patients with type 2 AIP and those who had undergone pancreatic surgery were excluded. The primary end point was complete remission, defined as the absence of clinical symptoms and resolution of the index radiologic pancreatic abnormalities attributed to AIP. RESULTS: We included 735 individuals with AIP (69% male; median age, 57 years; 85% White). Steroid treatment was started in 634 patients, of whom 9 (1%) were lost to follow-up. The remaining 625 had a 79% (496/625) complete, 18% (111/625) partial, and 97% (607/625) cumulative remission rate, whereas 3% (18/625) did not achieve remission. No treatment was given in 95 patients, who had a 61% complete (58/95), 19% partial (18/95), and 80% cumulative (76/95) spontaneous remission rate. Higher (≥0.4 mg/kg/day) corticosteroid doses were no more effective than lower (<0.4 mg/kg/day) doses (odds ratio, 0.428; 95% confidence interval, 0.054-3.387) and neither was a starting dose duration >2 weeks (odds ratio, 0.908; 95% confidence interval, 0.818-1.009). Elevated IgG4 levels were independently associated with a decreased chance of complete remission (odds ratio, 0.639; 95% confidence interval, 0.427-0.955). Relapse occurred in 30% of patients. Relapses within 6 months of remission induction were independent of the steroid-tapering duration, induction treatment duration, and total cumulative dose. CONCLUSIONS: Patients with type 1 AIP and elevated IgG4 level may need closer monitoring. For remission induction, a starting dose of 0.4 mg/kg/day for 2 weeks followed by a short taper period seems effective. This study provides no evidence to support more aggressive regimens.

Adaptive monitoring in action-what drives arthropod diversity and composition in central European beech forests?

Recent studies suggest that arthropod diversity in German forests is declining. Currently, different national programs are being developed to monitor arthropod trends and to unravel the effects of forest management on biodiversity in forests. To establish effective long-term monitoring programs, a set of drivers of arthropod diversity and composition as well as suitable species groups have to be identified. To aid in answering these questions, we investigated arthropod data collected in four Hessian forest reserves (FR) in the 1990s. To fully utilize this data set, we combined it with results from a retrospective structural sampling design applied at the original trap locations in central European beech (Fagus sylvatica) forests. As expected, the importance of the different forest structural, vegetation, and site attributes differed largely between the investigated arthropod groups: beetles, spiders, Aculeata, and true bugs. Measures related to light availability and temperature such as canopy cover or potential radiation were important to all groups affecting either richness, composition, or both. Spiders and true bugs were affected by the broadest range of explanatory variables, which makes them a good choice for monitoring general trends. For targeted monitoring focused on forestry-related effects on biodiversity, rove and ground beetles seem more suitable. Both groups were driven by a narrower, more management-related set of variables. Most importantly, our study approach shows that it is possible to utilize older biodiversity survey data. Although, in our case, there are strong restrictions due to the long time between species and structural attribute sampling.

Adhesion Characterization and Enhancement between Polyimide-Silica Composite and Nodulated Copper for Applications in Next-Generation Microelectronics.

As the need for high-speed electronics continues to rise rapidly, printed wiring board (PWB) requirements become ever-more demanding. A typical PWB is fabricated by bonding dielectric films such as polyimide to electrically conductive copper foil such as rolled annealed (RA) copper and is expected to become thinner, flexible, durable, and compatible with high-frequency 5G performance. Polyimide films inherently feature a higher coefficient of thermal expansion (CTE) than copper foils; this mismatch causes residual thermal stresses. To attenuate the mismatch, silica nanoparticles may be used to reduce the CTE of PI. A nodulated copper surface can be used to enhance the Cu/PI adhesion by additional bonding mechanisms that could include a type of mechanical bonding, which is a focus of this study. In this investigation, a 90° peel test was used to measure the peel strength in copper/polyimide/copper laminates containing nodulated copper and polyimide reinforced with 0, 20, and 40 wt % silica nanoparticles. The influence of silica nanoparticles on the peel strength was quantitatively evaluated. Laminates incorporating polyimide films lacking silica nanoparticles had a ∼3.75× higher peel strength compared with laminates reinforced with 40% silica. Their failure surfaces were analyzed by using scanning electron microscopy (SEM), energy-dispersive X-ray analysis (EDX), and X-ray photoelectron spectroscopy to identify the mode of failure and to understand bonding mechanisms. The key bonding mechanism, mechanical interlocking, was achieved when the polyimide surrounded or engulfed the copper nodules when the laminate was created. Post-testing failure surface analysis revealed the presence of copper on the polyimide side and polyimide on the copper side, indicating mixed mode failure. An analytical model was developed to determine the impact of applied pressure, temperature, and time on the polyimide penetration and mechanical interlocking around the copper nodules. The model was validated by measuring the peel strength on another set of specimens fabricated using increased temperature and pressure that showed a 3× increase in peel strength compared to lower temperature/pressure processing conditions. This enhanced adhesion resulted from the lower polymer material viscosity at higher temperatures, which fosters deeper and more complete penetration around the copper nodules during processing at higher pressures for longer durations. The methodology of combining peel testing, viscosity and CTE measurement, SEM/EDX, surface chemical analysis, and penetration depth calculation developed herein enables the calculation of the desired processing parameters to enhance functionality and improve adhesion.