Modification of Magnetite Nanoparticles with Triazine-Based Dendrons and Their Application as Drug-Transporting Systems.

The following research aims at the synthesis of magnetite nanoparticles functionalized with triazine-based dendrons and the application of the obtained materials as effective sorptive materials dedicated to acidic bioactive compounds. The adopted synthetic approach involved: (1) the synthesis of nanosized Fe3O4 particles via classic co-precipitation method, (2) the introduction of amine groups on their surface leading to materials' precursor, and (3) the final synthesis of branched triazine-based dendrons on the support surface by an iterative reaction between cyanuric chloride (CC) and piperazine (p) or diethylenetriamine (DETA) via nucleophilic substitution. The characterized materials were tested for their adsorptive properties towards folic acid, 18ß-glycyrrhetinic acid, and vancomycin, showing high adsorption capacities varying in the ranges of 53.33-401.61, 75.82-223.71, and 68.17-132.45 mg g-1, respectively. The formed material-drug complexes were also characterized for the drug-delivery potential, performed as in vitro release studies at pH 2.0 and 7.4, which mimics the physiological conditions. The release profiles showed that the proposed materials are able to deliver up to 95.2% of the drugs within 48 h, which makes them efficient candidates for further biomedical applications.

ESR Method in Monitoring of Nanoparticle Endocytosis in Cancer Cells.

Magnetic nanoparticles are extensively studied for their use in diagnostics and medical therapy. The behavior of nanoparticles after adding them to cell culture is an essential factor (i.e., whether they attach to a cell membrane or penetrate the membrane and enter into the cell). The present studies aimed to demonstrate the application of electron spin resonance (ESR) as a suitable technique for monitoring of nanoparticles entering into cells during the endocytosis process. The model nanoparticles were composed of magnetite iron (II, III) oxide core functionalized with organic unit containing nitroxide radical 4-hydroxy-TEMPO (TEMPOL). The research studies included breast cancer cells, as well as model yeast and human microvascular endothelial cells. The results confirmed that the ESR method is suitable for studying the endocytosis process of nanoparticles in the selected cells. It also allows for direct monitoring of radical cellular processes.

Dendrimer-Functionalized Hybrid Materials Based on Silica as Novel Carriers of Bioactive Acids.

One of the major goals in the materials science is the design and development of non-toxic, versatile, and efficient drug delivery systems. The study reported in this paper concerns the syntheses of poly(amidoamine) (PAMAM) dendrimers with tris(2-aminoethyl)amine as an amine core and different terminal amines, and their attachment to silica matrix. The obtained ethylenediamine (EDA), triethylenetetramine (TETA), tris(2-aminoethyl)amine (TREN) and 4,7,10-trioxa-1,13-tridecanediamine (TRI-OXA) dendrimers were introduced to the support surface via an epoxy linker, leading to a loading efficiency in the range of 0.054-0.113 mmol g-1, determined using elemental and thermogravimetric analyses. The materials exhibited high adsorption capacities towards the chosen model drugs: folic, salicylic and nicotinic acid. The investigated adsorption processes were found to follow the Freundlich isotherm model, with indication of the drugs' structure influence on the binding efficiency. Drug-loaded hybrid materials were also described for in vitro drug release in three pH-different paraphysiological media. The highest percentage release was obtained in the tests performed at pH 2.0, ranging between 35.42 and 99.83%. Satisfactory results and the versatility of PAMAM dendrimers may lead to the application of such materials not only as drug carriers dedicated to a wide range of pharmaceutics, but also as analytical tools for pre-concentration and/or the determination of biocompound contamination in samples.

Application of Molecularly Imprinted Polymers (MIP) and Magnetic Molecularly Imprinted Polymers (mag-MIP) to Selective Analysis of Quercetin in Flowing Atmospheric-Pressure Afterglow Mass Spectrometry (FAPA-MS) and in Electrospray Ionization Mass Spectrometry (ESI-MS).

Molecularly imprinted polymer (MIP) and magnetic molecularly imprinted polymer (mag-MIP) for solid extraction and pre-concentration of quercetin have been successfully prepared by thermal polymerization method using quercetin (Q) as a template, acrylamide (AA) as a functional monomer, and ethylene glycol dimethacrylate (EGDMA) as a cross-linking agent. The MIP and mag-MIP were successfully applied in analysis of quercetin by mass spectrometry (MS) methods. To perform ambient plasma ionization experiments, a setup consisting of the heated crucible, a flowing atmospheric-pressure afterglow (FAPA) plasma ion source, and amaZon SL ion trap (Bruker, Bremen, Germany) was used. The heated crucible with programmable temperature allowed desorption of the analytes from MIPs structure which resulted in their direct introduction into the ion stream. The results of Q-MIP/Q-mag-MIP and FAPA-MS measurements were compared with those of the analysis of quercetin by the ESI-MS method without extractions and pre-concentration of analytes on polymers. Limits of detection (LOD) for quercetin solutions in both positive and negative ESI-MS were established at 10-8 M and 10-7 M, respectively. The linearity (R2 = 0.9999) of the proposed analytical procedure for quercetin determination in positive ions was provided in the range between 10-4 M and 10-7 M. Moreover, the same parameters were established for FAPA-MS in positive ions, reaching LOD at 0.005 mg/gMIP and the linearity of the method in the range of 0.015-0.075 mg/gMIP with the correlation coefficient value R2 = 0.9850.

Physico-chemical characterization of formulations containing endomorphin-2 derivatives.

In this study semisolid formulations containing AcYPFF (N-acetyl-Tyr-Pro-Phe-Phe-NH2) tetrapeptide were obtained and characterized in terms of rheology, stability by multiple light scattering and particle size distribution by laser diffraction. Additionally, the release studies of tetrapeptide from formulations obtained were performed. The influence of different factors such as semisolid and membrane type on tetrapeptide release rate was examined. The release experiments of tetrapeptide modified with palmitoyl group (PalmYPFF) were also carried out. The results proved that formulation type and its rheological properties strongly determined the permeation process of the tetrapeptide. The fastest release of tetrapeptide was observed from hydrogel that had the lowest viscosity. The kinetic data of tetrapeptide released from oil-in-water (o/w) and water-in-oil (w/o) emulsions prepared at elevated temperature showed good fit to the Higuchi equation, whereas when AcYPFF was released from oil-in-water (o/w) emulsion prepared with the addition of auto-emulsifier high linearity with Korsmeyer-Peppas model was observed. While when tetrapeptide was released from Hydrogel the most suitable model was the first-order kinetics. It was suggested that mechanism that led to the release of tetrapeptide from all formulations was non-Fickian diffusion transport. The presence of palmitoyl group changed the solubility of tetrapeptide both in formulation and receptor fluid and thus the release rate of active compound was modified.

Molecularly imprinted polymers as selective adsorbents for ambient plasma mass spectrometry.

The application of molecularly imprinted polymers (MIPs) as molecular scavengers for ambient plasma ionization mass spectrometry has been reported for the first time. MIPs were synthesized using methacrylic acid as functional monomer; nicotine, propyphenazone, or methylparaben as templates; ethylene glycol dimethacrylate as a cross-linker; and 2,2'-azobisisobutyronitrile as polymerization initiator. To perform ambient plasma ionization experiments, a setup consisting of the heated crucible, a flowing atmospheric-pressure afterglow (FAPA) plasma ion source, and a quadrupole ion trap mass spectrometer has been used. The heated crucible with programmable temperature allows for desorption of the analytes from MIPs structure which results in their direct introduction into the ion stream. Limits of detection, linearity of the proposed analytical procedure, and selectivities have been determined for three analytes: nicotine, propyphenazone, and methylparaben. The analytes used were chosen from various classes of organic compounds to show the feasibility of the analytical procedure. The limits of detections (LODs) were 10 nM, 10, and 0.5 µM for nicotine, propyphenazone, and methylparaben, respectively. In comparison with the measurements performed for the non-imprinted polymers, the values of LODs were improved for at least one order of magnitude due to preconcentration of the sample and reduction of background noise, contributing to signal suppression. The described procedure has shown linearity in a broad range of concentrations. The overall time of single analysis is short and requires ca. 5 min. The developed technique was applied for the determination of nicotine, propyphenazone, and methylparaben in spiked real-life samples, with recovery of 94.6-98.4%. The proposed method is rapid, sensitive, and accurate which provides a new option for the detection of small organic compounds in various samples. Graphical abstract The experimental setup used for analysis.

Synthesis of G0 aminopolyol and aminosugar dendrimers, controlled by NMR and MALDI TOF mass spectrometry.

Organic compounds designed to serve as stable dendrimer cores were developed. A series of aminosugar and amino polyol containing G0 dendrimers were synthesized. The reaction mixture composition was checked by MALDI TOF mass spectrometry, while that of purified products - by 1H and 13C NMR combined with 2D NMR spectroscopy as well as MALDI TOF MSMS mass spectra. Mass spectrometric fragmentation experiments were performed in positive ion mode in order to determine common fragmentation patterns of [M+H]+ ions.

Halloysite nanotubes as carriers of vancomycin in alginate-based wound dressing.

The influence of an inorganic support - halloysite nanotubes - on the release rate and biological activity of the antibiotic encapsulated in alginate-based dressings was studied. The halloysite samples were loaded with approx. 10 wt.% of the antibiotic and then encapsulated in Alginate and Gelatin/Alginate gels. The material functionalized with aliphatic amine significantly extended the release of vancomycin from alginate-based gels as compared to that achieved when silica was used. After 24 h, the released amounts of the antibiotic immobilized at silica reached 70%, while for the drug immobilized at halloysite the released amount of vancomycin reached 44% for Alginate discs. The addition of gelatin resulted in even more prolonged sustained release of the drug. The antibiotic was released from the system with a double barrier with Higuchi kinetic model and Fickian diffusion mechanism. Only the immobilized drug encapsulated in Alginate gel demonstrated very good antimicrobial activity against various bacteria. The inhibition zones were greater than those of the standard discs for the staphylococci and enterococci bacteria tested. The addition of gelatin adversely affected the biological activity of the system. The inhibition zones were smaller than those of the reference samples. A reduction in the drug dose by half had no significant effect on changing the release rate and microbiological activity. The in vivo toxicity studies of the material with immobilized drug were carried out with Acutodesmus acuminatus and Daphnia magna. The material studied had no effect on the living organisms used in the bioassays. The proposed system with a double barrier demonstrated high storage stability.

Flowing atmospheric pressure afterglow combined with laser ablation for direct analysis of compounds separated by thin-layer chromatography.

A thin-layer chromatography-mass spectrometry (TLC-MS) setup for characterization of low molecular weight compounds separated on standard TLC plates has been constructed. This new approach successfully combines TLC separation, laser ablation, and ionization using flowing atmospheric pressure afterglow (FAPA) source. For the laser ablation, a low-priced 445-nm continuous-wave diode laser pointer, with a power of 1 W, was used. The combination of the simple, low-budget laser pointer and the FAPA ion source has made this experimental arrangement broadly available, also for small laboratories. The approach was successfully applied for the characterization of low molecular weight compounds separated on TLC plates, such as a mixture of pyrazole derivatives, alkaloids (nicotine and sparteine), and an extract from a drug tablet consisting of paracetamol, propyphenazone, and caffeine. The laser pointer used was capable of ablating organic compounds without the need of application of any additional substances (matrices, staining, etc.) on the TLC spots. The detection limit of the proposed method was estimated to be 35 ng/cm(2) of a pyrazole derivative.

Determination of conditional stability constants for phytic acid complexes with Mg2+, Ca2+ and Zn2+ ions using electrospray ionization mass spectrometry.

The electrospray ionization mass spectrometry competitive method has been used for the determination of the conditional stability constants of phytic acid complexes with Mg2+, Ca2+ and Zn2+ ions. The competing complexation between ethylenediaminetetraacetic acid (EDTA) and phytic acid was studied. For EDTA complexes with Mg2+, Ca2+ and Zn2+ ions, the values of the conditional stability constants are known and were used for the calculation of this constant for the phytic acid complexes. The values obtained are in agreement with the literature data. The method applied permitted a fast and simple determination of conditional stability constants by measuring the response of the ionized coordination complexes.

Magnetic scavengers as carriers of analytes for flowing atmospheric pressure afterglow mass spectrometry (FAPA-MS).

In this paper, a procedure for the preconcentration and transport of mixtures of acids, bases, and drug components to a mass spectrometer using magnetic scavengers is presented. Flowing atmospheric pressure afterglow mass spectrometry (FAPA-MS) was used as an analytical method for identification of the compounds by thermal desorption from the scavengers. The proposed procedure is fast and cheap, and does not involve time-consuming purification steps. The developed methodology can be applied for trapping harmful substances in minute quantities, to transport them to specialized, remotely located laboratories.

The influence of fluorine position on the properties of fluorobenzoxaboroles.

5-Fluoro-2,1-benzoxaborol-1(3H)-ol, a potent antifungal drug also known as Tavaborole or AN2690, has been compared with its three isomers in terms of its activity against several fungi as well as pKa and multinuclear NMR characterization. The molecular and crystal structure of 6-fluoro-2,1-benzoxaborol-1(3H)-ol was determined and compared with that of AN2690.

Molecular scavengers as carriers of analytes for mass spectrometry identification.

Storage and preconcentration of various molecules by molecular scavengers for thermal desorption and identification by mass spectrometry is presented. A dielectric barrier discharge ionization source combined with a heating element for the chemical characterization of amines and organic acids, initially trapped by molecular scavengers, is described. The developed technique can be applied for preconcentration of minute amounts of molecules in liquid and gaseous phases, as well as their transportation and thorough analysis. The method, operating at ambient pressure, can also be complementary to electron impact ionization, with no need for sample derivatization.

Influence of fluorine substituents on the NMR properties of phenylboronic acids.

The paper presents results of a systematic NMR studies on fluorinated phenylboronic acids. All possible derivatives were studied. The experimental (1)H, (13)C, (19)F, (11)B, and (17)O spectral data were compared with the results of theoretical calculations. The relation between the calculated natural bond orbital parameters and spectral data (chemical shifts and coupling constants) is discussed. The first examples of (10)B/(11)B isotopic effect on the (19)F spectra and (4)JFO scalar coupling in organic compounds are reported.

Laser desorption/ionization mass spectrometric analysis of surfactants on functionalized carbon nanotubes.

RATIONALE: Recently, unmodified and carboxylated carbon nanotubes have been used as assisting surfaces laser desorption/ionization (LDI) in mass spectrometry. The functionalization of carbon nanotubes with organic compounds should lead to a gamut of other promising LDI-assisting surfaces. METHODS: Carboxylated carbon nanotubes were functionalized with sinapinic acid either covalently or by creating an ionic macro-complex. Polyether-based surfactants were used as analytes to examine the properties of these new matrices. Mass spectrometric analysis was conducted on a LDI-quadrupole time-of-flight (QTOF) mass spectrometer. Carbon nanotube surfaces were deposited from suspension using the dried-droplet method. RESULTS: The functionalization of the carbon nanotubes was confirmed with Fourier transform infrared (FTIR) spectroscopy. The usefulness of each material was examined with two poly(ethylene glycol) hexadecyl ether amphiphiles (Brij® 52 and Brij® 56) and a poly(ethylene glycol) monomethyl ether as analytes. Generally, the mass spectra obtained with carbon nanotubes covalently functionalized with sinapinic acid as a matrix had peaks with higher intensities than those obtained with carbon nanotubes functionalized by ionic macro-complex formation. CONCLUSIONS: The presented new materials based on functionalized carbon nanotubes are effective in the LDI mass analysis of polyether amphiphiles and poly(ethylene glycol) monomethyl ether. This type of assisting surfaces can be highly modified by appropriate functionalization procedures.

Laser desorption/ionization mass spectrometric analysis of folic acid, vancomycin and Triton® X-100 on variously functionalized carbon nanotubes.

RATIONALE: Carbon nanotubes (CNTs) have been ascertained to constitute versatile assisting matrices for laser desorption/ionization mass spectrometric analysis of different molecules. The functionalization thereof can lead to obtaining laser desorption/ionization assisting surfaces that would allow the detection of molecules at lower concentration and produce spectra with a better signal-to-noise ratio. METHODS: Pristine, -OH and -COOH functionalized multi-walled CNTs were obtained from commercial suppliers. Gallic or sinapinic acid was attached covalently to the CNT surfaces by forming an ester bond. Folic acid, vancomycin and Triton(®) X-100 were used as analytes to examine properties of these new assisting surfaces. Mass spectrometry analysis was conducted on a matrix-assisted laser desorption/ionization quadrupole time-of-flight (MALDIQTOF) mass spectrometer. RESULTS: The functionalization of CNTs was confirmed with Fourier transform infrared (FTIR) spectroscopy. The obtained mass spectra revealed that all the assisting surfaces are capable of transferring energy to the analytes; moreover, the presence of carboxyl groups in the structures of CNTs highly enhances their ionization properties. Nevertheless, the presence of sinapinic acid on CNT surfaces does not increase their properties to absorb pulse laser energy. CONCLUSIONS: The presented assisting surfaces are effective in LDI mass analysis of folic acid, vancomycin and Triton(®) X-100. The appropriate functionalization of CNTs can lead to the production of assisting surfaces that can become highly effective in the ionization of particular types of analytes.

Spectroscopic studies of amino acid ionic liquid-supported Schiff bases.

Amino acid ionic liquid-supported Schiff bases, derivatives of salicylaldehyde and various amino acids (L-threonine, L-valine, L-leucine, L-isoleucine and L-histidine) have been investigated by means of various spectroscopic techniques (NMR, UV-Vis, IR, MS) and deuterium isotope effects on ¹³C-NMR chemical shifts. The results have shown that in all studied amino acid ionic liquid-supported Schiff bases (except the L-histidine derivative) a proton transfer equilibrium exists and the presence of the COO⁻ group stabilizes the proton transferred NH-form.

Medicinal Herbs in the Relief of Neurological, Cardiovascular, and Respiratory Symptoms after COVID-19 Infection A Literature Review.

COVID-19 infection causes complications, even in people who have had a mild course of the disease. The most dangerous seem to be neurological ailments: anxiety, depression, mixed anxiety-depressive (MAD) syndromes, and irreversible dementia. These conditions can negatively affect the respiratory system, circulatory system, and heart functioning. We believe that phytotherapy can be helpful in all of these conditions. Clinical trials confirm this possibility. The work presents plant materials (Valeriana officinalis, Melissa officinalis, Passiflora incarnata, Piper methysticum, Humulus lupulus, Ballota nigra, Hypericum perforatum, Rhodiola rosea, Lavandula officinalis, Paullinia cupana, Ginkgo biloba, Murraya koenigii, Crataegus monogyna and oxyacantha, Hedera helix, Polygala senega, Pelargonium sidoides, Lichen islandicus, Plantago lanceolata) and their dominant compounds (valeranon, valtrate, apigenin, citronellal, isovitexin, isoorientin, methysticin, humulone, farnesene, acteoside, hypericin, hyperforin, biapigenin, rosavidin, salidroside, linalool acetate, linalool, caffeine, ginkgolide, bilobalide, mihanimbine, epicatechin, hederacoside C,α-hederine, presegenin, umckalin, 6,7,8-trixydroxybenzopyranone disulfate, fumaroprotocetric acid, protolichesteric acid, aucubin, acteoside) responsible for their activity. It also shows the possibility of reducing post-COVID-19 neurological, respiratory, and cardiovascular complications, which can affect the functioning of the nervous system.

Deferoxamine-Modified Hybrid Materials for Direct Chelation of Fe(III) Ions from Aqueous Solutions and Indication of the Competitiveness of In Vitro Complexing toward a Biological System.

Deferoxamine (DFO) is one of the most potent iron ion complexing agent belonging to a class of trihydroxamic acids. The extremely high stability constant of the DFO-Fe complex (log ß = 30.6) prompts the use of deferoxamine as a targeted receptor for scavenging Fe(III) ions. The following study aimed at deferoxamine immobilization on three different supports: poly(methyl vinyl ether-alt-maleic anhydride), silica particles, and magnetite nanoparticles, leading to a class of hybrid materials exhibiting effectiveness in ferric ion adsorption. The formed deferoxamine-loaded hybrid materials were characterized with several analytical techniques. Their adsorptive properties toward Fe(III) ions in aqueous samples, including pH-dependence, isothermal, kinetic, and thermodynamic experiments, were investigated. The materials were described with high values of maximal adsorption capacity q m, which varied between 87.41 and 140.65 mg g-1, indicating the high adsorptive potential of the DFO-functionalized materials. The adsorption processes were also described as intense, endothermic, and spontaneous. Moreover, an exemplary magnetically active deferoxamine-modified material has been proven for competitive in vitro binding of ferric ions from the biological complex protoporphyrin IX-Fe(III), which may lead to a further examination of the materials' biological or medical applicability.