Ozonized gels vs chlorhexidine in non-surgical periodontal treatment: A randomized clinical trial.

OBJECTIVE: To evaluate the efficacy of newly introduced ozonated gels compared with conventional chlorhexidine gel in the home management of periodontal patients. MATERIALS AND METHODS: 30 patients with bilateral periodontal disease (severity I, complexity II) were enrolled (split-mouth study design). After nonsurgical mechanical periodontal debridement, the teeth were randomly divided into two groups: teeth in the Control group were treated with a chlorhexidine-based gel to aid oral hygiene maneuvers for 2 weeks after the first visit, while teeth in the Test group were treated in the same way with ozone-based gels. After the baseline assessment, the follow-up included assessments at 1, 2, and 6 months. The variables evaluated were clinical attachment loss (CAL), probing pocket depth (PPD), bleeding on probing (BoP), plaque control record (PCR), recession (R), and tooth mobility (TM). RESULTS: For CAL, PPD, BoP, and PCR, significant intragroup differences were found for both groups (p < 0.05), in contrast to intergroup differences (p > 0.05). No significant differences were found for R and TM. CONCLUSION: Nonsurgical mechanical periodontal debridement with adjunctive use of ozone and chlorhexidine was found to be effective in periodontal treatment. Ozone could be suggested as an alternative to chlorhexidine.

Biomimetic hydroxyapatite paste for molar-incisor hypomineralization: A randomized clinical trial.

OBJECTIVES: The aim of this randomized clinical trial was to evaluate the desensitizing and remineralizing effect of a new zinc-hydroxyapatite-based paste in sites affected by molar-incisor hypomineralization (MIH), by assessing dental sensitivity, tooth wear, and periodontal indexes. MATERIALS AND METHODS: Twenty-five patients with presence of 1 enamel demineralization of permanent molars and incisors in two different quadrants were recruited. After professional dental hygiene, a domiciliary hydroxyapatite-based paste was assigned and recommended to be applied on 2 MIH teeth in one random quadrant (test group), while the 2 contralateral MIH teeth did not undergo paste application (control group). The following primary outcomes were assessed: Plaque Control Record (PCR), Bleeding Index (BI), MIH Treatment Need Index (MIH-TNI), and Schiff Air Index (SAI). RESULTS: No significant inter- and intragroup differences were found for PI and BI, except for both intragroup T0-T1. For MIH-TNI, significant intergroup differences were detectable in the test group after 9 months of treatment. For SAI values, no significant differences were found in the control group, while in the test group, significant lower values were found after 1 and 3 months since baseline, respectively. CONCLUSIONS AND CLINICAL RELEVANCE: Biomimetic zinc-hydroxyapatite showed a desensitizing effect when used to treat MIH.

Orthodontic repositioning of a lingually positioned transmigrated mandibular canine.

This case report presents the successful orthodontic repositioning of a transmigrated and lingually positioned mandibular canine with conventional mechanics. Treatment began with the aim of creating space for the four permanent canines that had not yet erupted. Cervical headgear, mesial slice, and extraction of the deciduous teeth were executed, but only the right canines erupted; moreover, the mandibular left canine had become lingually transmigrated. Multibracket therapy was performed with the orthodontic repositioning of both left canines in 2 steps. They were repositioned, and good alignment was obtained. To our knowledge, this is the first case report describing the orthodontic repositioning of a lingually transmigrated canine with conventional double-arch mechanics. This treatment was successful and without significant complications, even though this approach can be challenging and time-consuming.

Laser Devices and Autologous Platelet Concentrates in Prevention and Treatment of Medication-Related Osteonecrosis of the Jaws: A Systematic Review.

Background and Objectives: Medication-related osteonecrosis of the jaws (MRONJ) is a disease that affects many patients taking anti-angiogenic and antiresorptive medicines. Since the pathogenetic mechanism is still partially unknown, preventive strategies, as well as treatment alternatives, are needed. Therefore, the aim of this research is to describe the main evidence from the last 10 years of clinical trials regarding the use of auxiliary devices such as autologous platelet concentrates (APCs) and laser, other than their effects against MRONJ disease onset or therapy. Advantages in the healing process and recurrence rates were also analyzed. Materials and Methods: A systematic search of the electronic databases of PubMed and Scopus was carried out. Data from the studies were analyzed, and the risk of bias was evaluated. Results: Nineteen studies between interventional studies, observational studies, and cohort studies have been considered in this review. Conclusions: Based on the studies included, the literature analysis shows that APCs could be a beneficial alternative in preventing and treating MRONJ. Laser technology, as a surgical tool or used on the antimicrobial photodynamic or photobiomodulation side, has been becoming increasingly popular in the last few years. The latest proposal concerning the combination of both auxiliary tools suggests interesting effects, but more studies should be conducted to evaluate eventual relapses and long-term consequences.

Local anesthesia with SleeperOne S4 computerized device vs traditional syringe and perceived pain in pediatric patients: a randomized clinical trial.

Local anesthesia is performed in dentistry before clinical procedures to avoid pain. Children can show fear at the sight of the needle and pain at its insertion. To make local anesthesia more comfortable, the use of computer-controlled local anesthetic delivery (CCLAD) systems has been developed to control the flow rate of the anesthetic solution injected through the needle. The aim of the present research is to evaluate and compare the discomfort felt by patients using a traditional syringe and the CCLAD system SleeperOne®, by considering pain, size sensation, bitterness, and vomit. 30 patients were included in the study and randomly assigned to traditional anesthesia or CCLAD. After injection, patients were assessed for the abovementioned outcomes. A Visual Analogue Scale (VAS) from 0 to 10 scores was used. As far as pain is concerned, statistically lower mean values were found in the Trial group (p < 0.05). Instead, concerning size, bitterness and vomit perceptions, no statistically significant differences were found between the groups (p > 0.05). Linear regressions were calculated considering technique, quadrant, dental arch, tooth, dentition, sex, and age as independent variables. The technique has shown to have a significant influence on pain (p < 0.05), with lower values for SleeperOne® device. Pain resulted significantly influenced by the type of dentition (p < 0.05), with higher scores for deciduous one. Moreover, perceived pain decreased with the increase of the age of patients (p < 0.05). At last, bitterness perception scores resulted to be higher for primary first molars (p < 0.05). SleeperOne® device seems to be a valid support for the reduction of pain related to anesthetic injection, especially in children. Further studies should evaluate CCLADs' uses combined with lidocaine preanesthetic as well as with conscious sedation through nitrous oxide in order to determine possible synergistic effects between these procedures.

Oral findings in pediatric patients with allergic rhinitis and asthma: a cohort study of an Italian setting.

Allergic rhinitis and asthma are two frequent respiratory clinical entities commonly encountered in pediatric clinical settings. Previous studies have evaluated the influence of these two conditions on oral health, but conflicting results have been obtained. The present cohort study aimed to record oral findings (i.e., caries, plaque, gingival inflammation and mouth breathing) in 50 pediatric patients diagnosed with allergic rhinitis and/or asthma in an Italian pediatric setting and to compare them to a control group of 50 healthy children. The following oral indexes were calculated: Periodontal Screening and Recording (PSR), Plaque Control Record (PCR), and Decayed Missing Filled Teeth (DMFT) Index. The absence or presence of mouth breathing was also recorded. Descriptive and inferential statistics were conducted. Statistically significant differences were found between cases and controls for PSR (p = 0.0051) and PCR scores (p < 0.0001), whereas no significant differences were detected for DMFT. Mouth breathing was found among 20 (40.00%) patients of the Case Group, while in the Control group only in 11 (22.00%) patients, and no significant differences were found between allergic rhinitis and asthma gradings for mouth breathers (p > 0.05). Finally, linear regressions showed a significant influence of PSR (p = 0.0051) and PCR (p < 0.0001) on the Case group. Mouth breathing also significantly influenced PCR scores of the Case group (p = 0.0206). Accordingly, allergic rhinitis and asthma can promote mouth breathing, plaque accumulation, and periodontal inflammation. Based on these considerations, pediatric dentists and physicians are expected to know the influence of respiratory conditions on oral health and consider this aspect when taking care of children.

The knowledge of orthodontic and craniofacial growth amongst Italian Pediatric Medical Residents for early diagnosis in growing patients: a cross-sectional study.

Paediatric residents usually visit children since the first years of life and can potentially diagnose craniofacial anomalies and malocclusions. Therefore, the aim of this study was to assess the ability of paediatric medical residents to diagnose malocclusions in growing subjects at an early stage. Eighty-three paediatric medical residents from the University of Pavia, Italy, who were enrolled in the Paediatric Residency program, participated in an online questionnaire. The questionnaire covered demographic variables, oral examination practices, dental and orthodontic knowledge, and sources of information. Following this, the residents were presented with a photographic analysis and asked to determine the treatment priority for 10 patients with malocclusions using the Index of Orthodontic Treatment Need (IOTN). On average, it was recommended that the first orthodontic visit should occur at around 4.92 years of age. The results showed that 75.9% of the residents always performed oral examinations on their patients, and 48.1% assigned a priority score of 8 or higher. The scores obtained by the paediatric residents did not significantly differ based on the year of study, frequency of oral examinations, or sources of information reported. Notably, there was a particular underestimation of treatment priority for malocclusions characterized by a significant increase in overjet. The findings suggest a potential lack of improvement in orthodontic knowledge during the medical residency program. It is recommended to increase the availability of orthodontic information sources for paediatric residents to enhance their understanding in this area.

The role of cochlear implant positioning on MR imaging quality: a preclinical in vivo study with a novel implant magnet system.

PURPOSES: To investigate the effects for Ultra 3D cochlear implant (CI) positioning on MR imaging quality, looking at a comprehensive description of intracranial structures in cases of unilateral and bilateral CI placement. METHODS: Four CI angular positions (90°, 120°, 135° and 160°) at 9 cm distance from the outer-ear canal were explored. The 1.5 T MRI assessment included our institutional protocol for the investigation of brain pathologies without gadolinium application. Three investigators (two experienced neuroradiologists and one experienced otoneurosurgeon) independently evaluated the MR findings. A 4-point scale was adopted to describe 14 intracranial structures and to determine which CI positioning allowed the best image quality score and how bilateral CI placement modified MRI scan visibility. RESULTS: A high positive correlation was found between the three blinded observers. Structures situated contralateral from the CI showed high-quality values in all four placements. Structures situated ipsilaterally provided results suitable for diagnostic purposes for at least one position. At 90°, artifacts mainly involved brain structures located cranially and anteriorly (e.g., temporal lobe); on the contrary, at 160°, artifacts mostly influenced the posterior fossa structures (e.g., occipital lobe). For the bilateral CI condition, MR imaging examination revealed additional artifacts involving all structures located close to either CI, where there was a signal void/distortion area. CONCLUSIONS: Suitable unilateral CI positioning can allow the visualization of intracranial structures with sufficient visibility for diagnostic purposes. Bilateral CI positioning significantly deteriorates the anatomical visibility. CI positioning might play a crucial role for patients who need post-operative MRI surveillance.

Dental Erosion Evaluation with Intact-Tooth Smartphone Application: Preliminary Clinical Results from September 2019 to March 2022.

Dental erosion is a process of deterioration of the dental hard tissue; it is estimated that about 30% of permanent teeth are affected in adolescence. The Intact-Tooth application allows for the better estimation of the problem, inserting itself in the diagnosis process, and better care and prevention for the patient. It provides him with scientifically validated protocols, which the patient can consult at any time. The purpose of this report was to conduct an initial evaluation on the use of the application, which has been available since September 2019: the analysis of the collected data allowed the first investigation of the incidence of the problem and the degree of susceptibility in the registered patients. Photos of 3894 patients with dental erosion were uploaded, through which the degree of susceptibility and the BEWE (basic erosive wear examination index) index could be assessed; of these, 99.72% had a susceptibility grade of 0 to 8, while 0.28% had a medium-high susceptibility grade; this result is related to the age and sex of the patients. The management of patients through the help of the application could promote the diagnosis and treatment of enamel diseases and encourage the self-learning of the learning machine, thanks to the number of clinical cases uploaded.

Effect of different enamel pretreating agents on bonding efficacy and survival rates of orthodontic brackets: In vitro study and split-mouth randomized clinical trial.

INTRODUCTION: This double in vitro study and randomized clinical trial aimed to investigate the bonding failure rates of orthodontic brackets after enamel pretreatment with agents showing different particle sizes. METHODS: For the in vitro study, 80 bovine teeth were randomly divided into 4 groups according to the pretreating method used and their particle sizes: erythritol (14 µm), glycine (18-22 µm), sodium bicarbonate (70 µm), and no pretreatment. Scanning electron microscopy microphotographs were performed after pretreatment. Then, brackets were bonded, and shear bond strength was calculated. For the clinical study, agents with low (erythritol) and high (sodium bicarbonate) particle sizes were chosen. Twenty consecutive patients willing to start fixed orthodontic treatment with vestibular stainless steel brackets were enrolled. Patients were randomly divided into 2 groups following a split-mouth design. Group A underwent a 5-second enamel pretreatment procedure with erythritol for teeth belonging to maxillary left and mandibular right quadrants, whereas the remaining quadrants were pretreated for 5 seconds with sodium bicarbonate powder. In group B, quadrants were inverted. Then, brackets were bonded on the vestibular surfaces of teeth, and patients were visited monthly for 12 months to assess bond failures. Periodontal evaluation of probing pocket depth, bleeding on probing, plaque index, and papilla bleeding index was conducted before bonding and after 1, 3, 6, and 12 months. RESULTS: The in vitro study showed that erythritol and control presented significantly higher shear bond strength values for other agents. Bicarbonate showed the lowest values. In the clinical study, 20 patients (aged 16.4 ± 3.9 years) were enrolled, and all completed the study. Erythritol showed a significantly lower failure rate (3%) than sodium bicarbonate (7.5%). Kaplan-Meier survival plots showed statistically significant differences in risk of failure between the 2 groups during the 12-month follow-up. CONCLUSIONS: Enamel pretreatment with erythritol can be a viable technique to reduce failure rates of orthodontic brackets. REGISTRATION: The trial was not registered. PROTOCOL: The protocol was not published before trial commencement. FUNDING: No funding or grant was received for this research.

Root Injury During Interradicular Insertion is the most Common Complication Associated with Orthodontic Miniscrews.

ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION: Complications reported with the use of orthodontic miniscrews: A systematic review. Giudice AL, Rustico L, Longo M, Oteri G, Papadopoulos MA, Nucera R. Korean J Orthod 2021 May 25;51(3):199-216. doi: 10.4041/kjod.2021.51.3.199. PMID: 33984227. SOURCE OF FUNDING: There is no information about funding. TYPE OF STUDY/DESIGN: Systematic review.

MRI-induced artifact by a cochlear implant with a novel magnet system: an experimental cadaver study.

PURPOSES: To primarily evaluate MRI-induced effects for Ultra 3D cochlear implantation in human cadavers in terms of artifact generation and MR image quality. METHODS: Three human cadaveric heads were submitted to imaging after unilateral and bilateral cochlear implantation. The 1.5 T MR examination protocol was chosen in accordance with our institutional protocol for the assessment of brain pathology. The maximal signal void size was measured according to each sequence and plane. Two experienced neuro-radiologists and one experienced otoneurosurgeon independently evaluated the MR image quality findings. A 4-point scale was used to describe the diagnostic usefulness of 14 brain structures. RESULTS: Shape and size of the artifacts were found to be highly related to MRI sequences and acquisition planes. MRI sequences and processing algorithms affected the ability to assess anatomical visibility. Image quality appeared either high or assessable for diagnostic purposes in 9 out of 14 of the ipsilateral structures, in at least one plane. Anatomical structures contralateral to the cochlear implant were highly visible in all conditions. Artifact intrusion clearly improved after application of metal artifact-reduction techniques. In the case of bilateral cochlear implant, a mutual interaction between the two implant magnets produced an additional artifact. CONCLUSIONS: We performed the first cadaver study aimed at systematically evaluating the MRI-induced artifacts produced by a cochlear implant with a novel four bar magnet system. Specific brain structures can be assessable for diagnostic purposes under 1.5 T MRI, with the cochlear implant magnet in place.

Angelo Chiavaro (1870-1944), the first "American style" Italian dentist.

Angelo Chiavaro (1870-1944) took his Medicine Degree at the University of Florence and then moved to the University of Philadelphia; he was the first Italian doctor to enroll and graduate from the Philadelphia Dental School, obtaining in 1899 the diploma of Doctor of Dental Surgery. In 1915, he was the first full professor of Dental Clinics in Rome; in 1923, he established a "National School of Dentistry" in Rome and his aim was to confer the first Italian degree in Dentistry and Dental Prosthetics following a University educational path similar to American schools.

Effect of Long-Term Brushing on Deflection, Maximum Load, and Wear of Stainless Steel Wires and Conventional and Spot Bonded Fiber-Reinforced Composites.

Fiber-reinforced composite (FRC) retainers are an aesthetic alternative to conventional Stainless Steel splints. They are generally used with a full bonded technique, but some studies demonstrated that they could be managed with a spot bonding technique to significantly decrease their rigidity. In order to propose this FRC spot bonding technique for clinical use, the aim of this study was to evaluate mechanical properties and surface wear of fibers left uncovered. Tests were made by simulating tooth brushing, comparing FRC spot bonding technique splints with stainless steel and FRC traditional technique splints. Specimens were tested both at 0.1 mm of deflection and at maximum load, showing higher values of rigidity for the FRC full bonded technique. After tooth brushing, no significant reduction in values at 0.1 mm deflection was reported, while we found a similar reduction in these values for the Stainless Steel and FRC spot bonding technique at maximum load, and no significant variation for the FRC full bonded technique. SEM images after tooth brushing showed wear for FRC fibers left uncovered, while no relevant wear signs in metal and conventional FRC fibers were noticed. Results showed that FRC spot bonding technique has advantages in mechanical properties when compared to the FRC traditional full bonding technique, also after tooth brushing. However, the surface wear after tooth brushing in the FRC spot bonding technique is considerable and other tests must be performed before promoting this technique for routine clinical use.

Beniamino De Vecchis (1886-1972) Italian Dentist and Historian.

Beniamino De Vecchis (1886-1972) took his Medicine Degree at the University of Naples and then moved to the University of Philadelphia to carry out experimental studies in dental science. He had been Professor of Dentistry at the University of Rome in the second half of twentieth century and was an author of important essays about dentistry and history of dentistry. Moreover, he was the first author of an Italian treatise about orthodontics and dentofacial orthopedics. In this paper we propose to analyze and evaluate his contributions to dentistry in his country of Italy.

Spot-Bonding and Full-Bonding Techniques for Fiber Reinforced Composite (FRC) and Metallic Retainers.

Fiber reinforced Composite (FRC) retainers have been introduced as an aesthetic alternative to conventional metallic splints, but present high rigidity. The purpose of the present investigation was to evaluate bending and fracture loads of FRC splints bonded with conventional full-coverage of the FRC with a composite compared with an experimental bonding technique with a partial (spot-) resin composite cover. Stainless steel rectangular flat, stainless steel round, and FRC retainers were tested at 0.2 and 0.3 mm deflections and at a maximum load. Both at 0.2 and 0.3 mm deflections, the lowest load required to bend the retainer was recorded for spot-bonded stainless steel flat and round wires and for spot-bonded FRCs, and no significant differences were identified among them. Higher force levels were reported for full-bonded metallic flat and round splints and the highest loads were recorded for full-bonded FRCs. At the maximum load, no significant differences were reported among spot- and full-bonded metallic splints and spot-bonded FRCs. The highest loads were reported for full bonded FRCs. The significant decrease in the rigidity of spot-bonded FRC splints if compared with full-bonded retainers suggests further tests in order to propose this technique for clinical use, as they allow physiologic tooth movement, thus presumably reducing the risk of ankylosis.

Sella turcica bridging and dental anomalies: is there an association?

BACKGROUND: Sella turcica bridging (STB), or calcification of the interclinoid ligament of sella turcica, has been reported to be associated with some dental anomalies (palatal canine impaction and transposition). HYPOTHESIS OR AIM: The aim of the study was to find any association between canine impaction, hyperdontia or hypodontia and sellar dimensions or bridging. DESIGN: Lateral cephalometric radiographs from 78 patients with impacted canines, 68 with dental agenesis and 17 with hyperdontia were collected. Linear dimensions of sella turcica were calculated and compared to those of a control group (47 individuals). A standardize scoring scale was used to quantify the extent of STB from each radiographs. RESULTS: The frequency of partial and complete calcifications of sella in patients with dental anomalies is increased when compared to controls. STB can influence the interclinoid distance but does not affect other linear dimensions of sella. No statistically significant difference has been found in sellar dimensions and STB expression when evaluating radiographs at different ages. CONCLUSIONS: STB is frequently found in patients with dental abnormalities.

Flexural strengths of conventional and nanofilled fiber-reinforced composites: a three-point bending test.

OBJECTIVES: The purpose of this study was to evaluate the effect of the introduction of nanofillers on the mechanical properties of fiber-reinforced composites (FRCs) for stabilization and conservative treatment of multiple traumatized anterior teeth. In particular, the aim of the research was to point out the force levels of two sizes (diameters 0.6 and 0.9 mm) of both conventional and nanofilled FRCs. METHODS: Eighty FRCs samples were divided into eight groups, each consisting of 10 specimens. Conventional (groups 1, 2, 3, and 4) and nanofilled (groups 5, 6, 7, and 8) FRC samples were evaluated. Each FRC was tested in two diameters (0.6 and 0.9 mm) and under two deflections (1 and 2 mm). Each sample was polymerized with the same halogen curing unit and then evaluated with a 3-point bending test on a universal testing machine after 48 h of dry storage. RESULTS: Nanofilled FRCs showed significantly higher load values than conventional FRCs. Moreover, 0.9-mm-diameter FRCs showed significantly higher load value than 0.6-mm-diameter FRCs. Specimens tested at 2-mm deflection showed significantly higher load values than those tested at 1-mm deflection. CONCLUSIONS: Nanofilled FRCs showed significantly higher load values than conventional FRCs. Higher flexural strength values were recorded with 1-mm deflection for both FRC tested.