RESUMO
High-level radioactive waste is accumulating at temporary storage locations around the world and will eventually be placed in deep geological repositories. The waste forms and containers will be constructed from glass, crystalline ceramic, and metallic materials, which will eventually come into contact with water, considering that the period of performance required to allow sufficient decay of dangerous radionuclides is on the order of 105-106 years. Corrosion of the containers and waste forms in the aqueous repository environment is therefore a concern. This Review describes the recent advances of the field of materials corrosion that are relevant to fundamental materials science issues associated with the long-term performance assessment and the design of materials with improved performance, where performance is defined as resistance to aqueous corrosion. Glass, crystalline ceramics, and metals are discussed separately, and the near-field interactions of these different material classes are also briefly addressed. Finally, recommendations for future directions of study are provided.
Assuntos
Resíduos Radioativos , Corrosão , Resíduos Radioativos/análiseRESUMO
The Flint water crisis raised questions about the factors resulting in unacceptable soluble lead concentrations in the city's drinking water. Although water treatment strategies, failure to follow regulations, and unethical behavior were all factors, knowledge deficits at the intersection of several scientific fields also contributed to the crisis. Pursuit of opportunities to address unresolved scientific questions can help avert future lead poisoning disasters. Such advances will enable scientifically based, data-driven risk assessments that inform decisions involving drinking water systems. In this way, managers and decision makers can anticipate, monitor, and prevent future lead in water crises.
RESUMO
We report experimental results on the composition and crystallography of oxides formed on NiCrMo alloys during both high-temperature oxidation and aqueous corrosion experiments. Detailed characterization using transmission electron microscopy and diffraction, aberration-corrected chemical analysis, and atom probe tomography shows unexpected combinations of composition and crystallography, far outside thermodynamic solubility limits. The results are explained using a theory for nonequilibrium solute capture that combines thermodynamic, kinetic, and density functional theory analyses. In this predictive nonequilibrium framework, the composition and crystallography are controlled by the rapidly moving interface. The theoretical framework explains the unusual combinations of composition and crystallography, which we predict will be common for many other systems in oxidation and corrosion, and other solid-state processes involving nonequilibrium moving interfaces.
RESUMO
The electrochemical impedance of reactive metals such as magnesium is often complicated by an obvious inductive loop with decreasing frequency of the AC polarising signal. The characterisation and ensuing explanation of this phenomenon has been lacking in the literature to date, being either ignored or speculated. Herein, we couple electrochemical impedance spectroscopy (EIS) with online atomic emission spectroelectrochemistry (AESEC) to simultaneously measure Mg-ion concentration and electrochemical impedance spectra during Mg corrosion, in real time. It is revealed that Mg dissolution occurs via Mg(2+) , and that corrosion is activated, as measured by AC frequencies less than approximately 1 Hz approaching DC conditions. The result of this is a higher rate of Mg(2+) dissolution, as the voltage excitation becomes slow enough to enable all Mg(2+) -enabling processes to adjust in real time. The manifestation of this in EIS data is an inductive loop. The rationalisation of such EIS behaviour, as it relates to Mg, is revealed for the first time by using concurrent AESEC.
RESUMO
Recent advances in characterization tools, computational capabilities, and theories have created opportunities for advancement in understanding of solid-fluid interfaces at the nanoscale in corroding metallic systems. The Faraday Discussion on Corrosion Chemistry in 2015 highlighted some of the current needs, gaps and opportunities in corrosion science. Themes were organized into several hierarchical categories that provide an organizational framework for corrosion. Opportunities to develop fundamental physical and chemical data which will enable further progress in thermodynamic and kinetic modelling of corrosion were discussed. These will enable new and better understanding of unit processes that govern corrosion at the nanoscale. Additional topics discussed included scales, films and oxides, fluid-surface and molecular-surface interactions, selected topics in corrosion science and engineering as well as corrosion control. Corrosion science and engineering topics included complex alloy dissolution, local corrosion, and modelling of specific corrosion processes that are made up of collections of temporally and spatially varying unit processes such as oxidation, ion transport, and competitive adsorption. Corrosion control and mitigation topics covered some new insights on coatings and inhibitors. Further advances in operando or in situ experimental characterization strategies at the nanoscale combined with computational modelling will enhance progress in the field, especially if coupling across length and time scales can be achieved incorporating the various phenomena encountered in corrosion. Readers are encouraged to not only to use this ad hoc organizational scheme to guide their immersion into the current opportunities in corrosion chemistry, but also to find value in the information presented in their own ways.
RESUMO
Corrosion is a ubiquitous failure mode of materials. Often, the progression of localized corrosion is accompanied by the evolution of porosity in materials previously reported to be either three-dimensional or two-dimensional. However, using new tools and analysis techniques, we have realized that a more localized form of corrosion, which we call 1D wormhole corrosion, has previously been miscategorized in some situations. Using electron tomography, we show multiple examples of this 1D and percolating morphology. To understand the origin of this mechanism in a Ni-Cr alloy corroded by molten salt, we combined energy-filtered four-dimensional scanning transmission electron microscopy and ab initio density functional theory calculations to develop a vacancy mapping method with nanometer-resolution, identifying a remarkably high vacancy concentration in the diffusion-induced grain boundary migration zone, up to 100 times the equilibrium value at the melting point. Deciphering the origins of 1D corrosion is an important step towards designing structural materials with enhanced corrosion resistance.
RESUMO
Corrosion is an electrochemical phenomenon. It can occur via different modes of attack, each having its own mechanisms, and therefore there are multiple metrics for evaluating corrosion resistance. In corrosion resistant alloys (CRAs), the rate of localized corrosion can exceed that of uniform corrosion by orders of magnitude. Therefore, instead of uniform corrosion rate, more complex electrochemical parameters are required to capture the salient features of corrosion phenomena. Here, we collect a database with an emphasis on metrics related to localized corrosion. The six sections of the database include data on various metal alloys with measurements of (1) pitting potential, Epit, (2) repassivation potential, Erp, (3) crevice corrosion potential, Ecrev, (4) pitting temperature, Tpit, (5) crevice corrosion temperature, Tcrev, and (6) corrosion potential, Ecorr, corrosion current density, icorr, passivation current density, ipass, and corrosion rate. The experimental data were collected from 85 publications and include Al- and Fe-based alloys, high entropy alloys (HEAs), and a Ni-Cr-Mo ternary system. This dataset could be used in the design of highly corrosion resistant alloys.
RESUMO
There is increasing concern regarding the biological consequences of metal release from implants. However, the mechanisms underpinning implant surface degradation, especially in the absence of wear, are often poorly understood. Here the synergistic effect of albumin and H2O2 on corrosion of Ti6Al4V in physiological saline is studied with electrochemical methods. It is found that albumin induces a time-dependent dissolution of Ti6Al4V in the presence of H2O2 in physiology saline. Potentiostatic polarisation measurements show that albumin supresses dissolution in the presence of H2O2 at short times (<24 h) but over longer time periods (120 h) it significantly accelerates corrosion, which is attributed to albumin-catalysed dissolution of the corrosion product layer resulting in formation of a thinner oxide film. Dissolution of Ti6Al4V in the presence of albumin and H2O2 in physiological saline is also found to be dependent on potential: the titanium ion release rate is found to be higher (0.57 µg/cm2) at a lower potential (90 mV), where the oxide capacitance and resistance inferred from Electrochemical Impedance Spectroscopy also suggests a less resistant oxide film. The study highlights the importance of using more realistic solutions, and considering behaviour over longer time periods when testing corrosion resistance of metallic biomaterials.
RESUMO
As a lightweight metal with mechanical properties similar to natural bone, Mg and its alloys are great prospects for biodegradable, load bearing implants. However, rapid degradation and H2 gas production in physiological media has prevented widespread use of Mg alloys. Surface heterogeneities in the form of intermetallic particles dominate the corrosion response. This research shows that surface homogenization significantly improved the biological corrosion response observed during immersion in simulated body fluid (SBF). The laser processed Mg alloy exhibited a 50% reduction in mass loss and H2 evolution after 24 h of immersion in SBF when compared to the wrought, cast alloy. The laser processed samples exhibited increased wettability as evident from wetting angle studies, further suggesting improved biocompatibility. Electrochemical analysis by potentiodynamic polarization measurements showed that the anodic and cathodic kinetics were reduced following laser processing and are attributed to the surface chemical homogeneity.
Assuntos
Ligas/química , Líquidos Corporais/química , Lasers , Corrosão , HumanosRESUMO
Atomic hydrogen (H) was introduced into steel (AISI 1018 mild steel) by controlled cathodic pre-charging. The resultant steel sample, comprising about 1 ppmw diffusible H, and a reference uncharged sample, were studied using atomic emission spectroelectrochemistry (AESEC). AESEC involved potentiodynamic polarisation in a flowing non-passivating electrolyte (0.6 M NaCl, pH 1.95) with real time reconciliation of metal dissolution using on-line inductively coupled plasma-atomic emission spectroscopy (ICP-OES). The presence of absorbed H was shown to significantly increase anodic Fe dissolution, as evidenced by the enhanced detection of Fe2+ ions by ICP-OES. We discuss this important finding in the context of previously proposed mechanisms for H-effects on the corrosion of steels.