RESUMO
Energy-efficient sensing with physically secure communication for biosensors on, around, and within the human body is a major area of research for the development of low-cost health care devices, enabling continuous monitoring and/or secure perpetual operation. When used as a network of nodes, these devices form the Internet of Bodies, which poses challenges including stringent resource constraints, simultaneous sensing and communication, and security vulnerabilities. Another major challenge is to find an efficient on-body energy-harvesting method to support the sensing, communication, and security submodules. Due to limitations in the amount of energy harvested, we require a reduction in energy consumed per unit information, making the use of in-sensor analytics and processing imperative. In this article, we review the challenges and opportunities of low-power sensing, processing, and communication with possible powering modalities for future biosensor nodes. Specifically, we analyze, compare, and contrast (a) different sensing mechanisms such as voltage/current domain versus time domain, (b) low-power, secure communication modalities including wireless techniques and human body communication, and (c) different powering techniques for wearable devices and implants.
Assuntos
Técnicas Biossensoriais , Dispositivos Eletrônicos Vestíveis , Humanos , Redes de Comunicação de Computadores , Tecnologia sem Fio , InternetRESUMO
This article presents a broad review on optical, radio-frequency (RF), microwave (MW), millimeter wave (mmW) and terahertz (THz) biosensors. Biomatter-wave interaction modalities are considered over a wide range of frequencies and applications such as detection of cancer biomarkers, biotin, neurotransmitters and heart rate are presented in detail. By treating biological tissue as a dielectric substance, having a unique dielectric signature, it can be characterized by frequency dependent parameters such as permittivity and conductivity. By observing the unique permittivity spectrum, cancerous cells can be distinguished from healthy ones or by measuring the changes in permittivity, concentration of medically relevant biomolecules such as glucose, neurotransmitters, vitamins and proteins, ailments and abnormalities can be detected. In case of optical biosensors, any change in permittivity is transduced to a change in optical properties such as photoluminescence, interference pattern, reflection intensity and reflection angle through techniques like quantum dots, interferometry, surface enhanced raman scattering or surface plasmon resonance. Conversely, in case of RF, MW, mmW and THz biosensors, capacitive sensing is most commonly employed where changes in permittivity are reflected as changes in capacitance, through components like interdigitated electrodes, resonators and microstrip structures. In this paper, interactions of EM waves with biomatter are considered, with an emphasis on a clear demarcation of various modalities, their underlying principles and applications.
RESUMO
The emergence of Human Body Communication (HBC), as an energy-efficient and physically secure mode of information exchange, has escalated the exploration of communication modalities between the human body and surrounding conducting objects. In this paper, we propose an Inter-Structure communication guided by Human Body while envisioning the need for non-contact sensing of biological objects such as humans with secure data offloading by analyzing the Structure-Human-Structure Interaction (SHSI) in Electro-Quasistatic (EQS) regime. Results show that the presence of a human between conducting structures (with Tx & Rx) can boost the received voltage by ~8 dB or more. Received signal level can be increased further by ~18 dB or more with a grounded receiver. Finite Element Method (FEM) based simulations are executed to study the positional variation of structure (with Rx) relative to body and earth's ground. Trends in simulation results are validated through experiments to develop an in-depth understanding of SHSI for EQS signals with low loss and enhanced physical security.
Assuntos
Dispositivos Eletrônicos Vestíveis , Humanos , Eletrodos , Simulação por Computador , ComunicaçãoRESUMO
Sensors in and around the environment becoming ubiquitous has ushered in the age of smart animal agriculture which has the potential to greatly improve animal health and productivity. The data gathered from sensors dwelling in animal agriculture settings have made farms a part of the IoT space leading to active research in developing efficient communication methodologies for farm networks. This study focuses on the first hop of farm networks where data from inside the body of animals is communicated to a node dwelling outside the body. Novel experimental methods are used to calculate the channel loss at sub-GHz frequencies (100-900 MHz) to characterize the in-body to out-of-body (IBOB) communication channel in large animals. A first-of-its-kind 3D bovine modeling is done with computer vision techniques for detailed morphological features of the animal body to perform Finite Element Method based Electromagnetic simulations. The results of the simulations are experimentally validated to build a complete channel modeling methodology for IBOB animal-body-communication. The 3D bovine model is made available publicly on GitHub. The results illustrate that an IBOB communication channel is realizable from the rumen to the collar of ruminants with [Formula: see text] path loss at sub-GHz frequencies making communication feasible. The developed methodology has been illustrated for ruminants but can also be used for other IBOB studies. An efficient communication architecture can be formed using the channel modeling technique illustrated for IBOB communication in animals paving the way for the design and development of future smart animal agriculture systems.
Assuntos
Agricultura , Ruminantes , Bovinos , Animais , Comunicação , Projetos de PesquisaRESUMO
Precision livestock farming (PLF) offers a strategic solution to enhance the management capacity of large animal groups, while simultaneously improving profitability, efficiency, and minimizing environmental impacts associated with livestock production systems. Additionally, PLF contributes to optimizing the ability to manage and monitor animal welfare while providing solutions to global grand challenges posed by the growing demand for animal products and ensuring global food security. By enabling a return to the "per animal" approach by harnessing technological advancements, PLF enables cost-effective, individualized care for animals through enhanced monitoring and control capabilities within complex farming systems. Meeting the nutritional requirements of a global population exponentially approaching ten billion people will likely require the density of animal proteins for decades to come. The development and application of digital technologies are critical to facilitate the responsible and sustainable intensification of livestock production over the next several decades to maximize the potential benefits of PLF. Real-time continuous monitoring of each animal is expected to enable more precise and accurate tracking and management of health and well-being. Importantly, the digitalization of agriculture is expected to provide collateral benefits of ensuring auditability in value chains while assuaging concerns associated with labor shortages. Despite notable advances in PLF technology adoption, a number of critical concerns currently limit the viability of these state-of-the-art technologies. The potential benefits of PLF for livestock management systems which are enabled by autonomous continuous monitoring and environmental control can be rapidly enhanced through an Internet of Things approach to monitoring and (where appropriate) closed-loop management. In this paper, we analyze the multilayered network of sensors, actuators, communication, networking, and analytics currently used in PLF, focusing on dairy farming as an illustrative example. We explore the current state-of-the-art, identify key shortcomings, and propose potential solutions to bridge the gap between technology and animal agriculture. Additionally, we examine the potential implications of advancements in communication, robotics, and artificial intelligence on the health, security, and welfare of animals.
Precision technologies are revolutionizing animal agriculture by enhancing the management of animal welfare and productivity. To fully realize the potential benefits of precision livestock farming (PLF), the development and application of digital technologies are needed to facilitate the responsible and sustainable intensification of livestock production over the next several decades. Importantly, the digitalization of agriculture is expected to provide collateral benefits of ensuring audibility in value chains while assuaging concerns associated with labor shortages. In this paper, we analyze the multilayered network of sensors, actuators, communication, and analytics currently in use in PLF. We analyze the various aspects of sensing, communication, networking, and intelligence on the farm leveraging dairy farms as an example system. We also discuss the potential implications of advancements in communication, robotics, and artificial intelligence on the security and welfare of animals.
Assuntos
Criação de Animais Domésticos , Inteligência Artificial , Animais , Agricultura , Fazendas , Gado , TecnologiaRESUMO
Human Body Communication (HBC) is an alternative to radio wave-based Wireless Body Area Network (WBAN) because of its wide bandwidth leading to enhanced energy efficiency. Designing Modern HBC devices need the accurate electrical equivalent of the HBC channel for energy efficient communication. The objective of this paper is to present an improved lumped element-based detailed model of Galvanic HBC channel which can be used to explain the dependency of the channel behaviour on the internal body dependent parameters such as electrical properties of skin and muscle tissue layers along with the external parameters such as electrode size, electrode separation, geometrical position of the electrodes and return-path or parasitic capacitances. The model considers the frequency-dependent impedance of skin and muscle tissue layers and the effect of various coupling capacitances between the body and Tx/Rx electrodes to the Earth-Ground. A 2D planar structure of skin and muscle tissue layers is simulated using a Finite Element Method (FEM) tool to prove the validity of the proposed model. The effect of symmetry and asymmetry at the transmitter and receiver ends is also explained using the model. The model become very useful for fast calculation of Galvanic channel response without using any FEM tool. Experimental results show that the galvanic response is not only a function of channel length but also depends on the mismatch at the transmitter and receiver end. In case of a very high mismatch scenario, the channel behavior is dominated by the capacitive HBC, even for a galvanic excitation and termination.
Assuntos
Corpo Humano , Tecnologia sem Fio , Humanos , Capacitância Elétrica , EletrodosRESUMO
With the advent of wearables, Human Body Communication (HBC) has emerged as a physically secure and power-efficient alternative to the otherwise ubiquitous Wireless Body Area Network (WBAN). Whereas the most investigated HBC modalities have been Electric and Electro-quasistatic (EQS) Capacitive and Galvanic, recently Magnetic HBC (M-HBC) has been proposed as a viable alternative. Previous works have investigated M-HBC through application points-of-view, without exploring its fundamental working principle. In this paper, a ground up analysis is performed to study the possible effects and contributions of the human body channel in M-HBC over 1kHz to 10 GHz, by electromagnetic simulations and supporting experiments. The results show that while M-HBC can be successfully operated as a body area network, the human body itself plays a minimal or negligible role in its functionality. For Magneto-quasistatic (MQS) HBC (frequencies less than â¼30 MHz), the body is transparent to the quasistatic magnetic field. Conversely for higher frequencies, the conductivity of human tissues attenuates Magnetic HBC fields due to induced Eddy currents, preventing the body to support efficient waveguide modes. With this conceptual understanding developed, different modes of operations of MQS HBC are outlined for both high impedance capacitive and 50Ω termination cases, and their performances are compared with EQS HBC for similar sized devices, over varying distances between TX and RX. The resulting report presents a fundamental understanding towards M-HBC operation and its contrast with EQS HBC, aiding HBC device designers to make educated design decisions, depending on application scenarios.
Assuntos
Corpo Humano , Tecnologia sem Fio , Humanos , EletricidadeRESUMO
Several on-body sensing and communication applications use electrodes in contact with the human body. Body-electrode interfaces in these cases act as a transducer, converting ionic current in the body to electronic current in the sensing and communication circuits and vice versa. An ideal body-electrode interface should have the characteristics of an electrical short, i.e., the transfer of ionic currents and electronic currents across the interface should happen without any hindrance. However, practical body-electrode interfaces often have definite impedances and potentials that hinder the free flow of currents, affecting the application's performance. Minimizing the impact of body-electrode interfaces on the application's performance requires one to understand the physics of such interfaces, how it distorts the signals passing through it, and how the interface-induced signal degradations affect the applications. Our work deals with reviewing these elements in the context of biopotential sensing and human body communication.
RESUMO
Human Body Communication (HBC) has come up as a promising alternative to traditional radio frequency (RF) Wireless Body Area Network (WBAN) technologies. This is essentially due to HBC providing a broadband communication channel with enhanced signal security in the physical layer due to lower radiation from the human body as compared to its RF counterparts. An in-depth understanding of the mechanism for the channel loss variability and associated biophysical model needs to be developed before electro-quasistatic (EQS) HBC can be used more frequently in WBAN consumer and medical applications. Recent developments have shown biophysical models that capture the channel response for fixed transmitter and receiver positions on the human body which do not capture the variability in the HBC channel for varying positions of the devices with respect to the body. In this study, we provide a detailed analysis of the change in path loss in a capacitive-HBC channel in the EQS domain. Causes of channel loss variability namely: inter-device coupling and effects of fringe fields due to body's shadowing effects are investigated. FEM based simulation results are used to analyze the channel response of human body for different positions and sizes of the device which are further verified using measurement results to validate the developed biophysical model. Using the biophysical model, we develop a closed form equation for the path loss in a capacitive HBC channel which is then analyzed as a function of the geometric properties of the device and the position with respect to the human body which will help pave the path towards future EQS-HBC WBAN design.
Assuntos
Comunicação , Tecnologia sem Fio , Simulação por Computador , HumanosRESUMO
The emergence of Human Body Communication (HBC) as an alternative to wireless body area networks (WBAN) has led to the development of small sized, energy efficient and more secure wearable and implantable devices forming a network in and around the body. Previous studies claim that though HBC is comparatively more secure than WBAN, nevertheless, the electromagnetic (EM) radiative nature of HBC in >10 MHz region makes the information susceptible to eavesdropping. Furthermore, interferences may be picked up by the body due to the human body antenna effect in the 40-400 MHz range. Alternatively, electro-quasistatic (EQS) mode of HBC forms an attractive way for covert data transmission in the sub 10 MHz region by allowing the signal to be contained within the body. However, there is a gap in the knowledge about the mechanism and sources of interference in this region (crucial in allowing for proper choice of data transmission band). In this paper, the interference coupling modality in the EQS region is explained along with its possible sources. Interferences seen by the wearable in the actual scenario is a non-trivial problem and a suitable measurement EQS HBC setup is designed to recreate it by employing a wearable sized measurement setup having a small ground plane. For the first time, a human biophysical interference pickup model is proposed and interference measurement results using a wearable device are presented up to 250 kHz in different environmental settings.
Assuntos
Dispositivos Eletrônicos Vestíveis , Tecnologia sem Fio , Comunicação , Humanos , Próteses e ImplantesRESUMO
Continuous multi-channel monitoring of biopotential signals is vital in understanding the body as a whole, facilitating accurate models and predictions in neural research. The current state of the art in wireless technologies for untethered biopotential recordings rely on radiative electromagnetic (EM) fields. In such transmissions, only a small fraction of this energy is received since the EM fields are widely radiated resulting in lossy inefficient systems. Using the body as a communication medium (similar to a 'wire') allows for the containment of the energy within the body, yielding order(s) of magnitude lower energy than radiative EM communication. In this work, we introduce Animal Body Communication (ABC), which utilizes the concept of using the body as a medium into the domain of untethered animal biopotential recording. This work, for the first time, develops the theory and models for animal body communication circuitry and channel loss. Using this theoretical model, a sub-inch[Formula: see text] [1â³ × 1â³ × 0.4â³], custom-designed sensor node is built using off the shelf components which is capable of sensing and transmitting biopotential signals, through the body of the rat at significantly lower powers compared to traditional wireless transmissions. In-vivo experimental analysis proves that ABC successfully transmits acquired electrocardiogram (EKG) signals through the body with correlation [Formula: see text] when compared to traditional wireless communication modalities, with a 50[Formula: see text] reduction in power consumption.
Assuntos
Eletrocardiografia , Modelos Teóricos , Dispositivos Eletrônicos Vestíveis , Tecnologia sem Fio , Animais , Desenho de Equipamento , RatosRESUMO
Radiative communication using electromagnetic fields is the backbone of today's wirelessly connected world, which implies that the physical signals are available for malicious interceptors to snoop within a 5-10 m distance, also increasing interference and reducing channel capacity. Recently, Electro-quasistatic Human Body Communication (EQS-HBC) was demonstrated which utilizes the human body's conductive properties to communicate without radiating the signals outside the body. Previous experiments showed that an attack with an antenna was unsuccessful at a distance more than 1 cm from the body surface and 15 cm from an EQS-HBC device. However, since this is a new communication modality, it calls for an investigation of new attack modalities-that can potentially exploit the physics utilized in EQS-HBC to break the system. In this study, we present a novel attack method for EQS-HBC devices, using the body of the attacker itself as a coupling surface and capacitive inter-body coupling between the user and the attacker. We develop theoretical understanding backed by experimental results for inter-body coupling, as a function of distance between the subjects. We utilize this newly developed understanding to design EQS-HBC transmitters that minimizes the attack distance through inter-body coupling, as well as the interference among multiple EQS-HBC users due to inter-body coupling. This understanding will allow us to develop more secure and robust EQS-HBC based body area networks in the future.
Assuntos
Segurança Computacional , Fenômenos Eletrofisiológicos , Dispositivos Eletrônicos Vestíveis/efeitos adversos , Tamanho Corporal , Campos Eletromagnéticos/efeitos adversos , Humanos , InternetRESUMO
Continuous real-time health monitoring in animals is essential for ensuring animal welfare. In ruminants like cows, rumen health is closely intertwined with overall animal health. Therefore, in-situ monitoring of rumen health is critical. However, this demands in-body to out-of-body communication of sensor data. In this paper, we devise a method of channel modeling for a cow using experiments and FEM based simulations at 400 MHz. This technique can be further employed across all frequencies to characterize the communication channel for the development of a channel architecture that efficiently exploits its properties.
Assuntos
Rúmen , Ruminantes , Agricultura , Animais , Bovinos , Comunicação , FemininoRESUMO
An amendment to this paper has been published and can be accessed via a link at the top of the paper.
RESUMO
Human Body Communication (HBC) utilizes the electrical conductivity properties of the human body to communicate between devices in and around the body. The increased energy-efficiency and security provided by HBC compared to traditional radio wave based communication makes it a promising alternative to communicate between energy constrained wearable and implantable devices around the body.However, HBC requires electrical signals to be transmitted through the body, which makes it essential to have a thorough analysis of the safety aspects of such transmission. This paper looks into the compliance of the current density and electric/magnetic fields generated in different modalities of HBC with the established safety standards. Circuit and Finite Element Method (FEM) based simulations are carried out to quantitatively find the compliance of current density and fields with the established safety limits. The results show the currents and fields in capacitive HBC are orders of magnitude smaller than the specified limits. However, certain excitation modalties in galvanic HBC can result in current densities and fields exceeding the safety limits around the excitation point on the body near the electrode. A study with 7 human subjects (4 male, 3 female) is carried out over a month, using capacitive HBC.The study monitors the change in 5 vital parameters (Heart Rate, Mean Arterial Pressure, Respiration Rate, Peripheral Capillary Oxygen Saturation, Temperature), while wearing a HBC enabled device. Analysis of the acquired data statistically shows no significant change in any of the vital parameters of the subjects, confirming the results of the simulation study.
Assuntos
Corpo Humano , Tecnologia sem Fio , Comunicação , Eletricidade , Eletrodos , Feminino , Humanos , MasculinoRESUMO
Prolific growth of miniaturized devices has led to widespread use of wearable devices and physiological sensors. The state-of-art technique for connecting these devices and sensors is through wireless radio waves. However, wireless body area wireless body area network (WBAN) suffers from limited security (wireless signals from energy-constrained sensors can be snooped by nearby attackers), poor energy-efficiency (up conversion and down conversion), and self-interference. Human body communication (HBC), which uses human body as a conducting medium, has emerged as a new alternative physical layer for WBAN, as it can enable communication with better energy efficiency and enhanced security. Broadband (BB) HBC uses the human body channel as a broadband communication medium and can enable higher energy efficiency compared to narrowband HBC. However, due to the antenna effect of human body, ambient interferences get picked up from the environment, proving to be one of the primary bottlenecks for BB-HBC systems. In this paper, we analyze the performance of an integrating dual data rate (I-DDR) receiver, which enables interference robust BB-HBC, under continuous wave (CW), amplitude modulated (AM), and frequency modulated (FM) interferences. Theoretical derivations along with simulations provide key insights into the behavior of I-DDR receiver under different interference scenarios, highlighting the efficacy (>22 dB improvement in SIR tolerance for both FM and AM) of the technique. Finally, measurements are carried out by applying the I-DDR principle on signals transmitted through the human body and captured on an oscilloscope. Measurements from an I-DDR receiver fabricated in TSMC 65 nm technology shows <10-4 BER in presence of CW, AM, and FM interference with -21 dB SIR further demonstrating the efficacy of the I-DDR method in interference rejection.
Assuntos
Comunicação , Redes de Comunicação de Computadores , Modelos Teóricos , Dispositivos Eletrônicos Vestíveis , Tecnologia sem Fio , HumanosRESUMO
Broadband Human Body Communication (HBC) enables energy efficient communication between body area network devices by utilizing the electrical conductivity property of the human body. However, environmental interference remains a primary bottleneck in its implementation. An integrating front-end receiver with resettable integration followed by periodic sampling can be utilized to enable interference robust broadband HBC. However, as required in all broadband communication systems, a Clock Data Recovery (CDR) loop is necessary to correctly sample the received data at the appropriate instant. The CDR is required to be sensitive to the clock-data phase mismatch at the receiver end and take corrective action for reducing it, similar to the CDR of a traditional receiver. In addition to that, the CDR for a broadband HBC receiver also requires to be tolerant to environmental interference. This paper analyzes the traditional Baud Rate CDR for an integrating front-end receiver and proposes a modified integrating CDR architecture with a higher update rate. Simulation results show 2.5X higher clock data frequency offset tolerance of the proposed CDR compared to the traditional Baud Rate CDR, >1.25X higher clock data frequency offset tolerance in presence of interference and >10% interference frequency offset tolerance with respect to the integration clock. The proposed CDR is also implemented in a Xilinx Spartan-3E FPGA board to validate its closed loop functionality in real time.
Assuntos
Algoritmos , Desenho de Equipamento , Corpo Humano , Processamento de Sinais Assistido por Computador , Tecnologia sem Fio , HumanosRESUMO
Radiative communication using electro-magnetic (EM) fields amongst the wearable and implantable devices act as the backbone for information exchange around a human body, thereby enabling prime applications in the fields of connected healthcare, electroceuticals, neuroscience, augmented and virtual reality. However, owing to such radiative nature of the traditional wireless communication, EM signals propagate in all directions, inadvertently allowing an eavesdropper to intercept the information. In this context, the human body, primarily due to its high water content, has emerged as a medium for low-loss transmission, termed human body communication (HBC), enabling energy-efficient means for wearable communication. However, conventional HBC implementations suffer from significant radiation which also compromises security. In this article, we present Electro-Quasistatic Human Body Communication (EQS-HBC), a method for localizing signals within the body using low-frequency carrier-less (broadband) transmission, thereby making it extremely difficult for a nearby eavesdropper to intercept critical private data, thus producing a covert communication channel, i.e. the human body. This work, for the first time, demonstrates and analyzes the improvement in private space enabled by EQS-HBC. Detailed experiments, supported by theoretical modeling and analysis, reveal that the quasi-static (QS) leakage due to the on-body EQS-HBC transmitter-human body interface is detectable up to <0.15 m, whereas the human body alone leaks only up to ~0.01 m, compared to >5 m detection range for on-body EM wireless communication, highlighting the underlying advantage of EQS-HBC to enable covert communication.
Assuntos
Eletrodos Implantados/normas , Medidas de Segurança , Fenômenos Fisiológicos da Pele , Dispositivos Eletrônicos Vestíveis/normas , Tecnologia sem Fio/instrumentação , Campos Eletromagnéticos , Humanos , Eletricidade Estática , Tecnologia sem Fio/normasRESUMO
Human body communication (HBC) has emerged as an alternative to radio wave communication for connecting low power, miniaturized wearable, and implantable devices in, on, and around the human body. HBC uses the human body as the communication channel between on-body devices. Previous studies characterizing the human body channel has reported widely varying channel response much of which has been attributed to the variation in measurement setup. This calls for the development of a unifying bio-physical model of HBC, supported by in-depth analysis and an understanding of the effect of excitation, termination modality on HBC measurements. This paper characterizes the human body channel up to 1 MHz frequency to evaluate it as a medium for the broadband communication. The communication occurs primarily in the electro-quasistatic (EQS) regime at these frequencies through the subcutaneous tissues. A lumped bio-physical model of HBC is developed, supported by experimental validations that provide insight into some of the key discrepancies found in previous studies. Voltage loss measurements are carried out both with an oscilloscope and a miniaturized wearable prototype to capture the effects of non-common ground. Results show that the channel loss is strongly dependent on the termination impedance at the receiver end, with up to 4 dB variation in average loss for different termination in an oscilloscope and an additional 9 dB channel loss with wearable prototype compared to an oscilloscope measurement. The measured channel response with capacitive termination reduces low-frequency loss and allows flat-band transfer function down to 13 KHz, establishing the human body as a broadband communication channel. Analysis of the measured results and the simulation model shows that instruments with 50 Ω input impedance (Vector Network Analyzer, Spectrum Analyzer) provides pessimistic estimation of channel loss at low frequencies. Instead, high impedance and capacitive termination should be used at the receiver end for accurate voltage mode loss measurements of the HBC channel at low frequencies. The experimentally validated bio-physical model shows that capacitive voltage mode termination can improve the low frequency loss by up to 50 dB, which helps broadband communication significantly.
Assuntos
Engenharia Biomédica/instrumentação , Comunicação , Eletrônica/instrumentação , Dispositivos Eletrônicos Vestíveis , Tecnologia sem Fio/instrumentação , Eletricidade , Desenho de Equipamento , Antebraço/fisiologia , Humanos , Masculino , Próteses e ImplantesRESUMO
Successful rehabilitation of oropharyngeal swallowing disorders (i.e., dysphagia) requires frequent performance of head/neck exercises that primarily rely on expensive biofeedback devices, often only available in large medical centers. This directly affects treatment compliance and outcomes, and highlights the need to develop a portable and inexpensive remote monitoring system for the telerehabilitation of dysphagia. Here, we present the development and preliminarily validation of a skin-mountable sensor patch that can fit on the curvature of the submental (under the chin) area noninvasively and provide simultaneous remote monitoring of muscle activity and laryngeal movement during swallowing tasks and maneuvers. This sensor patch incorporates an optimal design that allows for the accurate recording of submental muscle activity during swallowing and is characterized by ease of use, accessibility, reusability, and cost-effectiveness. Preliminary studies on a patient with Parkinson's disease and dysphagia, and on a healthy control participant demonstrate the feasibility and effectiveness of this system.