RESUMO
Phytic acid-assisted sludge hydrothermal carbonization was employed to synthesize phytic acid-modified hydrochar via a one-step method. The surface morphology, pore structure, elemental composition, functional groups, and thermal stability of the phytic acid-modified hydrochar were characterized. Sorption kinetics and isotherm experiments were conducted to investigate the effects of humic acid, temperature, and pH on the sorption process of cadmium ï¼Cdï¼ onto the phytic acid-modified hydrochar. The Cd fixation ability was evaluated through soil passivation experiments. The results demonstrated that the surface of the phytic acid-modified hydrochar exhibited an abundance of phosphoric acid groups, enhanced electronegativity, and thermal stability. Furthermore, both the sorption rate and maximum sorption capacity for Cd increased by 1.88 times and 1.22 times compared to that in unmodified hydrochar, respectively, owing to the presence of phosphoric acid groups that enhanced complexation and electrostatic interaction with Cd. Elevated temperatures, higher pH values, and coexistence with humic acids were beneficial for enhancing Cd sorption onto phytic acid-modified hydrochar. When heavy metals such as Cu, Zn, and Pb coexisted, the sorption capacity of phytic acid-modified hydrochar for Cd was 0.77-6.88 times higher than that for other metals. Phyic acid-modified hydrochar exhibited excellent efficiency in fixing Cd ï¼56.1%-81.l%ï¼, mitigating the loss of available nutrients in soil and significantly increasing the AP content in the soil. In conclusion, the use of phytic acid-modified hydrochar could effectively remove Cd from water and serve as a promising soil amendment for stabilizing soil Cd content.
RESUMO
The rare earth metal element lanthanum (La) possesses carcinogenic, genotoxic, and accumulative properties, necessitating urgent development of an efficient and cost-effective method to remove La. However, current sorbents still encounter challenges such as poor selectivity, low sorption capacity, and high production costs. This study therefore proposes a promising solution: the creation of phytic acid-assisted sludge hydrochars (P-SHCs) to eliminate La from water and soil environments. This method harnesses phytic acid's exceptional binding ability and the economical hydrothermal carbonization process. P-SHCs exhibit robust sorption affinity, fast sorption kinetics, and excellent sorption selectivity for La when compared with pristine hydrochars (SHCs). This advantage arises from the remarkable binding ability of phosphate functional groups (polyphosphates) on P-SHCs, forming P-O-La complexes. Moreover, P-SHCs demonstrate sustained sorption efficiency across at least five cycles, with a slight decrease attributed to the loss of phosphorus species and mass during recycling. Furthermore, P-SHCs demonstrated superior economic feasibility, with a higher estimated cost-benefit ratio than that of other sorbents. Our study further validates the exceptional passivation capability of P-SHCs, showcasing relative stabilization efficiency ranging from 37.6 % to 79.6 % for La contamination. Additionally, acting as soil passivation agents, P-SHCs foster the enrichment of specific soil microorganisms such as Actinobacteria and Proteobacteria, capable of solubilizing phosphorus and resisting heavy metals. These findings present novel ideas and technical support for employing P-SHCs in combatting environmental pollution stemming from rare earth metals.
Assuntos
Lantânio , Ácido Fítico , Lantânio/química , Fósforo , Solo , Polifosfatos , AdsorçãoRESUMO
As one of the large dosages of pharmaceutical and personal care products (PPCPs), acetaminophen is widely present in the water environment and presents potential environmental risks. Therefore, it is necessary to study the removal mechanism of acetaminophen from the environment. Based on the high-value conversion demand of agricultural straw resources in China, straw-derived biochar prepared by pyrolysis has a good application prospect for the sorption and purification of acetaminophen in water. However, the sorption process and mechanism of straw-derived biochar for acetaminophen remain unclear. Four types of straw (rice, wheat, maize, and bean straw) were chosen as raw materials, and straw-derived biochars were prepared through the pyrolysis method at 400â and 500â. The batch sorption experiments were used to study the sorption of acetaminophen to different sources and different pyrolysis temperature biochars. The effect of humic acid and pH on the sorption process was also studied. The results showed that:based on the Freundlich and site energy distribution models, the sorption of acetaminophen on biochar at 500â biochar was significantly higher than that at 400â biochar (the sorption coefficient KF was 1.16-2.53 times higher), and 500â biochar had more high-energy sorption sites. For high-temperature pyrolysis biochar, the primary sorption mechanism was pore sorption and π-π effect; for low-temperature pyrolysis biochar, the primary sorption mechanism for removing acetaminophen was H-bonding. The presence of humic acid enhanced the sorption of acetaminophen, which was attributed to the strong interaction between the humic acid selected in the experiment and acetaminophen, thus promoting adsorption. The decrease in sorption capacity of biochar caused by the increasing pH was mainly attributed to the pore blockage resulting from the aggregation of acetaminophen molecules. The pore sorption and π-π interaction of acetaminophen on straw-derived biochar could be promoted by increasing pyrolysis temperature. These experiments on humic acid and pH show that straw-derived biochar is not affected by humic acid and has good sorption performance in a low pH environment.
Assuntos
Acetaminofen , Substâncias Húmicas , Carvão Vegetal/química , ÁguaRESUMO
This study is based on a particular test site to simulate the weathering process of microplastics (MPs) in paddy soil. A substantial amount of plastic waste, especially MPs, inevitably accumulates in agricultural soil due to the high consumption and short average use of plastics. Recently, MP pollution has become a global environmental concern. However, insight into the soil weathering process of MPs in paddy soil, particularly in the presence of biochar, is lacking. In this study, the physicochemical properties of polyethylene (PE) MPs were determined through a 24-week weathering system conducted in paddy soil, paddy soil with pyrochar, or hydrochar. Moreover, the sorption of original and weathered PE MPs toward three typical pollutants (cadmium/Cd, bisphenol A/BPA, and dimethyl phthalate/DMP) was investigated. The surface of PE MPs was fractured, 1.1-fold rougher, yellow-colored (11.7 units), and 1.8-fold more oxidized after paddy soil weathering. In addition, the crystallinity, negative charge, and stronger hydrophilicity of weathered PE MPs increased compared to original PE MPs. Weathering in a pyrochar or hydrochar system caused fissures, extensive destruction of amorphous areas, and accelerated chemical or bio-oxidation processes for PE MPs, resulting in a more noticeable change in roughness (1.4-2.2-fold), yellow color (12.7-13.7), crystallinity (1.2-1.5-fold), and oxygen content (2.5-3.6-fold). Weathered PE MPs facilitated the sorption with Cd and BPA, attributed to larger specific surface area, abundant polar functional groups, and increased negatively charged sites. However, sorption of DMP to PE MPs was highly influenced by their hydrophobicity, resulting in decreased hydrophobic partition sorption on weathered PE MPs. Overall, paddy soil weathering affected the properties of PE MPs and enhanced sorption of Cd and BPA but reduced sorption of DMP. The coexistence of biochar exacerbated the paddy soil weathering effect. The insight gained from this study assists in better understanding the weathering process of PE MPs in agricultural soils.