RESUMO
The fluorescence quenching of carboxyl-rich g-C3N4nanoparticles was found to be selective to Ag+and Ce3+with a limit of detection as low as 30 pM for Ag+ions. A solid-state thermal polycondensation reaction was used to produce g-C3N4nanoparticles with distinct green fluorescence and high water solubility. Dynamic light scattering indicated an average nanoparticle size of 95 nm. The photoluminescence absorption and emission maxima were centered at 405 nm and 540 nm respectively which resulted in a large Stokes shift. Among different metal ion species, the carboxyl-rich g-C3N4nanoparticles were selective to Ag+and Ce3+ions, as indicated by strong fluorescence quenching and a change in the fluorescence lifetime. The PL sensing of heavy metal ions followed modified Stern-Volmer kinetics, and CNNPs in the presence of Ag+/Ce3+resulted in a higher value ofKapp(8.9 × 104M-1) indicating a more efficient quenching process and stronger interaction between CNNP and mixed ions. Sensing was also demonstrated using commercial filter paper functionalized with g-C3N4nanoparticles, enabling practical on-site applications.
RESUMO
A key challenge in the field of plexcitonic quantum devices is the fabrication of solid-state, device-friendly plexcitonic nanostructures using inexpensive and scalable techniques. Lithography-free, bottom-up nanofabrication methods have remained relatively unexplored within the context plexcitonic coupling. In this work, a plexcitonic system consisting of thermally dewetted plasmonic gold nanoislands (AuNI) coated with a thin film of J-aggregates was investigated. Control over nanoisland size and morphology allowed for a range of plasmon resonances with variable detuning from the exciton. The extinction spectra of the hybrid AuNI/J-aggregate films display clear splitting into upper and lower hybrid resonances, while the dispersion curve shows anti-crossing behavior with an estimated Rabi splitting of 180 eV at zero detuning. As a proof of concept for quantum sensing, the AuNI/J-aggregate hybrid was demonstrated to behave as a plexcitonic sensor for hydrochloric acid vapor analyte. This work highlights the possibility of using thermally dewetted nanoparticles as a platform for high-quality, tunable, cost-effective, and scalable plexcitonic nanostructures for sensing devices and beyond.
RESUMO
Coinage metal nanoparticles (NPs) enable plasmonic catalysis by generating hot carriers that drive chemical reactions. Making NPs porous enhances the adsorption of reactant molecules. We present a dewetting and dealloying strategy to fabricate porous gold nanoparticles (Au-Sponge) and compare their CO2 photoreduction activity with respect to the conventional gold nanoisland (Au-Island) morphology. Porous gold nanoparticles exhibit an unusually broad and red-shifted plasmon resonance which is in agreement with the results of finite difference time domain (FDTD) simulations. The key insight of this work is that the multi-step reduction of CO2 driven by short-lived hot carriers generated by the d â s interband transition proceeds extremely quickly as evidenced by the generation of methane. A 3.8-fold enhancement in the photocatalytic performance is observed for the Au-Sponge in comparison to the Au-Island. Electrochemical cyclic voltammetry measurements confirm the 2.5-fold increase in the surface area and roughness factor of the Au-Sponge sample due to its porous nature. Our results indicate that the product yield is limited by the amount of surface adsorbates i.e. reactant-limited. Isotope-labeled mass spectrometry using 13CO2 was used to confirm that the reaction product (13CH4) originated from CO2 photoreduction. We present the plasmon-mediated photocatalytic transformation of 4-aminothiophenol (PATP) into p,p'-dimercaptoazobenzene (DMAB) using Au-Sponge and Au-Island samples.
RESUMO
Actin filaments, as key components of the cytoskeleton, have aroused great interest due to their numerous functional roles in eukaryotic cells, including intracellular electrical signaling. The aim of this research is to characterize the alternating current (AC) conduction characteristics of both globular and polymerized actin and quantitatively compare their values to those theoretically predicted earlier. Actin filaments have been demonstrated to act as conducting bionanowires, forming a signaling network capable of transmitting ionic waves in cells. We performed conductivity measurements for different concentrations of actin, considering both unpolymerized and polymerized actin to identify potential differences in their electrical properties. These measurements revealed two relevant characteristics: first, the polymerized actin, arranged in filaments, has a lower impedance than its globular counterpart; second, an increase in the actin concentration leads to higher conductivities. Furthermore, from the data collected, we developed a quantitative model to represent the electrical properties of actin in a buffer solution. We hypothesize that actin filaments can be modeled as electrical resistor-inductor-capacitor (RLC) circuits, where the resistive contribution is due to the viscous ion flows along the filaments; the inductive contribution is due to the solenoidal flows along and around the helix-shaped filament and the capacitive contribution is due to the counterion layer formed around each negatively charged filament.
Assuntos
Citoesqueleto de Actina , Condutividade Elétrica , Animais , Citoesqueleto de Actina/metabolismo , Citoesqueleto de Actina/química , Actinas/metabolismo , Actinas/química , PolimerizaçãoRESUMO
Blended films comprising poly(butyl acrylate) (PBA)-grafted cellulose nanocrystals (CNCs) and poly(3-hexylthiophene) (P3HT), exhibited more intense photoluminescence (PL) and longer PL emission lifetimes compared to pristine P3HT films. Optical absorption and photoluminescence spectra indicated reduced torsional disorder i.e. enhanced backbone planarity in the P3HT@CNC blended composites compared to the bare P3HT. Such molecule-level geometrical modification resulted in both smaller interchain and higher intrachain exciton bandwidth in the blended composites compared to the bare P3HT, because of reduced interchain interactions and enhanced intrachain order. These results indicate a potential switch of the aggregation behavior from dominant H-aggregates to J-aggregates, supported by Raman spectroscopy. The reorganization of micromolecular structure and concomitant macroscopic aggregation of the conjugated polymer chains resulted in a longer conjugation length for the P3HT@CNC blended composites compared to the bare P3HT. Additionally, this nanoscale morphological change produced a reduction in the highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) energy gap of the blends, evidenced from optical absorption spectra. Classical molecular dynamics simulation studies predicted the probability of enhanced planarity in the polymer backbone following interactions with CNC surfaces. Theoretical results from density functional theory calculations corroborate the experimentally observed reduction of optical bandgap in the blends compared to bare P3HT. The blended composite outperformed the bare P3HT in nitro-group PL sensing tests with a pronounced difference in the reaction kinetics. While the PL quenching dynamics for bare P3HT followed Stern-Volmer kinetics, the P3HT@CNC blended composite exhibited a drastic deviation from the same. This work shows the potential of a functionalized rod-like biopolymer in tuning the optoelectronic properties of a technologically important polymeric organic semiconductor through control of the nanoscale morphology.
RESUMO
A new type of heavy-metal free single-element nanomaterial, called sulfur quantum dots (SQDs), has gained significant attention due to its advantages over traditional semiconductor QDs for several biomedical and optoelectronic applications. A straightforward and rapid synthesis approach for preparing highly fluorescent SQDs is needed to utilize this nanomaterial for technological applications. Until now, only a few synthesis approaches have been reported; however, these approaches are associated with long reaction times and low quantum yields (QY). Herein, we propose a novel optimized strategy to synthesize SQDs using a mix of probe sonication and heating, which reduces the reaction time usually needed from 125 h to a mere 15 min. The investigation employs cavitation and vibration effects of high energy acoustic waves to break down the bulk sulfur into nano-sized particles in the presence of highly alkaline medium and oleic acid. In contrast to previous reports, the obtained SQDs exhibited excellent aqueous solubility, desirable photostability, and a relatively high photoluminescence QY up to 10.4% without the need of any post-treatment. Additionally, the as-synthesized SQDs show excitation-dependent emission and excellent stability in different pH (2-12) and temperature (20 °C-80 °C) environments. Hence, this strategy opens a new pathway for rapid synthesis of SQDs and may facilitate the use of these materials for biomedical and optoelectronic applications.
RESUMO
We show a double-functional fluorescence sensing paradigm that can retrieve nanometric pH information on biological structures. We use this method to measure the extent of protonic condensation around microtubules, which are protein polymers that play many roles crucial to cell function. While microtubules are believed to have a profound impact on the local cytoplasmic pH, this has been hard to show experimentally due to the limitations of conventional sensing techniques. We show that subtle changes in the local electrochemical surroundings cause a double-functional sensor to transform its spectrum, thus allowing a direct measurement of the protonic concentration at the microtubule surface. Microtubules concentrate protons by as much as one unit on the pH scale, indicating a charge storage role within the cell via the localized ionic condensation. These results confirm the bioelectrical significance of microtubules and reveal a sensing concept that can deliver localized biochemical information on intracellular structures.
Assuntos
Microtúbulos , Prótons , Biofísica , Citoplasma/fisiologia , Concentração de Íons de Hidrogênio , Microtúbulos/metabolismoRESUMO
Tubulin is an electrostatically negative protein that forms cylindrical polymers termed microtubules, which are crucial for a variety of intracellular roles. Exploiting the electrostatic behavior of tubulin and microtubules within functional microfluidic and optoelectronic devices is limited due to the lack of understanding of tubulin behavior as a function of solvent composition. This work displays the tunability of tubulin surface charge using dimethyl sulfoxide (DMSO) for the first time. Increasing the DMSO volume fractions leads to the lowering of tubulin's negative surface charge, eventually causing it to become positive in solutions >80% DMSO. As determined by electrophoretic mobility measurements, this change in surface charge is directionally reversible, i.e., permitting control between -1.5 and + 0.2 cm2 (V s)-1 . When usually negative microtubules are exposed to these conditions, the positively charged tubulin forms tubulin sheets and aggregates, as revealed by an electrophoretic transport assay. Fluorescence-based experiments also indicate that tubulin sheets and aggregates colocalize with negatively charged g-C3 N4 sheets while microtubules do not, further verifying the presence of a positive surface charge. This study illustrates that tubulin and its polymers, in addition to being mechanically robust, are also electrically tunable.
Assuntos
Polímeros , Tubulina (Proteína) , Microtúbulos , Eletricidade EstáticaRESUMO
OBJECTIVE: To determine whether guideline non-adherence is associated with Black race. METHODS: A retrospective review of National Cancer Database records of women diagnosed with epithelial ovarian cancer from 2012 to 2016 who identified as "White" or "Black" was performed. Exposure was adherence or non-adherence to National Comprehensive Cancer Network guidelines for treatment. Outcomes were differences in disease characteristics and overall survival in months. RESULTS: Of the 29,948 eligible patients, 93% (n = 27,744) were White and 7% (n = 2204) were Black. Having stage IV disease (OR 1.45, 95% CI 1.23-1.70; P < 0.001) and treatment in a comprehensive (OR 1.58, 95% CI 1.16-2.15; P = 0.0039) or academic (OR 2.30, 95% CI 1.70-3.12; P < 0.001) treatment facility were associated with Black race. Adherence to guidelines did not predict Black race (OR for adherence 1.0021, 95% CI 0.89-1.13; P = 0.97). Median survival for White patients with adherent care was 63.4 months and 51.4 months for Black patients (P = 0.0001). Median survival for White patients with non-adherent care was 60.5 months and 47.2 months for Black patients (P < 0.0001). Median overall survival was 61.1 months in White patients and 49.3 months in Black patients (P < 0.0001). CONCLUSIONS: Our data suggest that while Black patients and patients who receive non-NCCN guideline directed care have worse survival outcomes, guideline adherence is not independently associated with Black race. We must consider other socioeconomic, environmental and system factors that are contributing to the survival discrepancy in Black patients with ovarian cancer.
Assuntos
Carcinoma Epitelial do Ovário/etnologia , Fidelidade a Diretrizes/estatística & dados numéricos , Disparidades nos Níveis de Saúde , Neoplasias Ovarianas/etnologia , População Negra/estatística & dados numéricos , Carcinoma Epitelial do Ovário/mortalidade , Bases de Dados Factuais , Feminino , Humanos , Estimativa de Kaplan-Meier , Pessoa de Meia-Idade , Neoplasias Ovarianas/mortalidade , Estudos Retrospectivos , Fatores de Risco , Fatores Socioeconômicos , População Branca/estatística & dados numéricosRESUMO
Owing to their unique structural and electronic properties such as layered structure with tuneable bandgap and high electron mobility, 2D materials have emerged as promising candidates for photocatalysis. Recently, bismuth oxyselenide (Bi2O2Se), a member of bismuth oxychalcogenide's family has shown great potential in high-speed field-effect transistors, infrared photodetectors, ferroelectric devices, and electrochemical sensors. However, the potential of Bi2O2Se in photocatalysis has not yet been explored. In the current work, Bi2O2Se nanosheets with an average size of â¼170 nm and a lattice strain of 0.01 were synthesized at room temperature using a facile solution-processed method and the as-synthesized material was investigated with various characterization techniques such as x-ray diffraction, FE-SEM, UV-vis spectroscopy. The bandgap for the indirect transition in Bi2O2Se nanosheets was estimated to be 1.19 eV. Further, the visible-light-driven photocatalytic degradation of methylene blue (MB) dye using Bi2O2Se as a photocatalyst is presented. The photocatalytic experiments demonstrate the promising photocatalytic ability of Bi2O2Se as it leads to 25.06% degradation of MB within 80 min of light illumination. The effect of active species trapping agents (carrier and radical scavengers) on photocatalytic activity is also presented and discussed.
RESUMO
We present the electrical properties of zinc phthalocyanine covalently conjugated to cellulose nanocrystals (CNC@ZnPc). Thin films of CNC@ZnPc sandwiched between two gold electrodes showed pronounced hysteresis in their current-voltage characteristics. The layered metal-organic-metal sandwich devices exhibit distinct high and low conductive states when bias is applied, which can be used to store information. Density functional theory results confirmed wave function overlap between CNC and ZnPc in CNC@ZnPc, and helped visualize the lowest (lowest unoccupied molecular orbital) and highest molecular orbitals (highest occupied molecular orbital) in CNC@ZnPc. These results pave the way forward for all-organic electronic devices based on low cost, earth abundant CNCs and metallophthalocyanines.
RESUMO
Quinary and senary non-stoichiometric double perovskites such as Ba2Ca0.66Nb1.34-xFexO6-δ(BCNF) have been utilized for gas sensing, solid oxide fuel cells and thermochemical CO2reduction. Herein, we examined their potential as narrow bandgap semiconductors for use in solar energy harvesting. A cobalt co-doped BCNF, Ba2Ca0.66Nb0.68Fe0.33Co0.33O6-δ(BCNFCo), exhibited an optical absorption edge at â¼800 nm,p-type conduction and a distinct photoresponse up to 640 nm while demonstrating high thermochemical stability. A nanocomposite of BCNFCo and g-C3N4(CN) was prepared via a facile solvent-assisted exfoliation/blending approach using dichlorobenzene and glycerol at a moderate temperature. The exfoliation of g-C3N4followed by wrapping on perovskite established an effective heterojunction between the materials for charge separation. The conjugated 2D sheets of CN enabled better charge migration resulting in increased photoelectrochemical performance. A blend composed of 40 wt% perovskites and CN performed optimally, whilst achieving a photocurrent density as high as 1.5 mA cm-2for sunlight-driven water-splitting with a Faradaic efficiency as high as â¼88%.
RESUMO
Cu2O is a promising earth-abundant semiconductor photocathode for sunlight-driven water splitting. Characterization results are presented to show how the photocurrent density (Jph), onset potential (Eonset), band edges, carrier density (NA), and interfacial charge transfer resistance (Rct) are affected by the morphology and method used to deposit Cu2O on a copper foil. Mesoscopic and planar morphologies exhibit large differences in the values ofNAandRct. However, these differences are not observed to translate to other photocatalytic properties of Cu2O. Mesoscopic and planar morphologies exhibit similar bandgap (e.g.) and flat band potential (Efb) values of 1.93 ± 0.04 eV and 0.48 ± 0.06 eV respectively.Eonsetof 0.48 ± 0.04 eV obtained for these systems is close to theEfbindicating negligible water reduction overpotential. Electrochemically deposited planar Cu2O provides the highest photocurrent density of 5.0 mA cm-2at 0 V vs reversible hydrogen electrode (RHE) of all the morphologies studied. The photocurrent densities observed in this study are among the highest reported values for bare Cu2O photocathodes.
RESUMO
Copper (Cu) and its alloys are prospective materials in fighting covid-19 virus and several microbial pandemics, due to its excellent antiviral as well as antimicrobial properties. Even though many studies have proved that copper and its alloys exhibit antiviral properties, this research arena requires further research attention. Several studies conducted on copper and its alloys have proven that copper-based alloys possess excellent potential in controlling the spread of infectious diseases. Moreover, recent studies indicate that these alloys can effectively inactivate the covid-19 virus. In view of this, the present article reviews the importance of copper and its alloys in reducing the spread and infection of covid-19, which is a global pandemic. The electronic databases such as ScienceDirect, Web of Science and PubMed were searched for identifying relevant studies in the present review article. The review starts with a brief description on the history of copper usage in medicine followed by the effect of copper content in human body and antiviral mechanisms of copper against covid-19. The subsequent sections describe the distinctive copper based material systems such as alloys, nanomaterials and coating technologies in combating the spread of covid-19. Overall, copper based materials can be propitiously used as part of preventive and therapeutic strategies in the fight against covid-19 virus.
Assuntos
Ligas/química , Antivirais/farmacologia , Antivirais/uso terapêutico , Tratamento Farmacológico da COVID-19 , Cobre/química , Animais , Anti-Infecciosos Locais , Desinfecção , Humanos , Nanopartículas Metálicas/química , Nanoestruturas/química , Pandemias , SARS-CoV-2RESUMO
Silver nanoislands are key platforms for plasmonic photocatalysis, SERS sensing and optical metamaterials due to their localized surface plasmon resonances. The low intrinsic loss in Ag enables high local electromagnetic field enhancements. Solution-based fabrication techniques, while cheap, result in highly non-reproducible plasmonic substrates with wide sample-to-sample variability in geometry, optical resonances and Q-factors. Herein, we present a non-lithographic method of forming silver nanoislands based on sputter deposition of Ag films followed by elevated temperature annealing to induce spontaneous dewetting. The resulting plasmonic substrates show reproducible, well-defined LSPR resonances with high ensemble Q-factors whose optical properties could be modeled using spectroscopic ellipsometry to yield n and k values across the visible range. UV-Vis-NIR, and XRD analyses define the optical and crystallographic characteristics of the Ag nanoisland samples. FESEM was utilized to discern the geometry and architecture of the Ag nanoisland as well as their uniformity and monodispersity. Our vacuum deposited Ag nanoislands demonstrated excellent photocatalytic activity for the transformation of 4-nitrobenzenethiol (4-NBT) and 4-aminothiophenol (PATP) into p,p'-dimercaptoazobenzene (DMAB).
RESUMO
Modification of carbon nitride based polymeric 2D materials for tailoring their optical, electronic and chemical properties for various applications has gained significant interest. The present report demonstrates the synthesis of a novel modified carbon nitride framework with a remarkable 3:5 C:N stoichiometry (C3N5) and an electronic bandgap of 1.76 eV, by thermal deammoniation of the melem hydrazine precursor. Characterization revealed that in the C3N5 polymer, two s-heptazine units are bridged together with azo linkage, which constitutes an entirely new and different bonding fashion from g-C3N4 where three heptazine units are linked together with tertiary nitrogen. Extended conjugation due to overlap of azo nitrogens and increased electron density on heptazine nucleus due to the aromatic π network of heptazine units lead to an upward shift of the valence band maximum resulting in bandgap reduction down to 1.76 eV. XRD, He-ion imaging, HR-TEM, EELS, PL, fluorescence lifetime imaging, Raman, FTIR, TGA, KPFM, XPS, NMR and EPR clearly show that the properties of C3N5 are distinct from pristine carbon nitride (g-C3N4). When used as an electron transport layer (ETL) in MAPbBr3 based halide perovskite solar cells, C3N5 outperformed g-C3N4, in particular generating an open circuit photovoltage as high as 1.3 V, while C3N5 blended with MA xFA1- xPb(I0.85Br0.15)3 perovskite active layer achieved a photoconversion efficiency (PCE) up to 16.7%. C3N5 was also shown to be an effective visible light sensitizer for TiO2 photoanodes in photoelectrochemical water splitting. Because of its electron-rich character, the C3N5 material displayed instantaneous adsorption of methylene blue from aqueous solution reaching complete equilibrium within 10 min, which is significantly faster than pristine g-C3N4 and other carbon based materials. C3N5 coupled with plasmonic silver nanocubes promotes plasmon-exciton coinduced surface catalytic reactions reaching completion at much low laser intensity (1.0 mW) than g-C3N4, which showed sluggish performance even at high laser power (10.0 mW). The relatively narrow bandgap and 2D structure of C3N5 make it an interesting air-stable and temperature-resistant semiconductor for optoelectronic applications while its electron-rich character and intrasheet cavity make it an attractive supramolecular adsorbent for environmental applications.
RESUMO
A fluorine-doped, chlorine-intercalated carbon nitride (CNF-Cl) photocatalyst has been synthesized for simultaneous improvements in light harvesting capability along with suppression of charge recombination in bulk g-C3N4. The formation of heterojunctions of these CNF-Cl nanosheets with low bandgap, earth abundant bismuth oxyiodide (BiOI) was achieved, and the synthesized heterojunctions were tested as active photoanodes in photoelectrochemical water splitting experiments. BiOI/CNF-Cl heterojunctions exhibited extended light harvesting with a band-edge of 680 nm and generated photocurrent densities approaching 1.3 mA cm-2 under AM1.5 G one sun illumination. Scanning Kelvin probe force microscopy under optical bias showed a surface potential of 207 mV for the 50% BiOI/CNF-Cl nanocomposite, while pristine CNF-Cl and BiOI had surface photopotential values of 83 mV and 98 mV, respectively, which in turn, provided direct evidence of superior charge separation in the heterojunction blends. Enhanced charge carrier separation and improved light harvesting capability in BiOI/CNF-Cl hybrids were found to be the dominant factors in increased photocurrent, compared to the pristine constituent materials.
RESUMO
Anodically formed TiO2 nanotube arrays (TNTAs) constitute an optoelectronic platform that is being studied for use as a photoanode in photoelectrocatalytic cells, as an electron transport layer (ETL) in solar cells and photodetectors, and as an active layer for chemiresistive and microwave sensors. For optimal transport of charge carriers in these one-dimensional polycrystalline ordered structures, it is desirable to introduce a preferential texture with the grains constituting the nanotube walls aligned along the transport direction. Through x-ray diffraction analysis, we demonstrate that choosing the right water content in the anodization electrolyte and the use of a post-anodization zinc ion treatment can introduce a preferential texture in sub-micron length transparent TNTAs formed on non-native substrates. The incorporation of 1.5 atom% of Zn in TiO2 nanotubes prior to annealing, was found to consistently result in the strongest preferential orientation along the [001] direction. [001] oriented TNTAs exhibited a responsivity of 523 A W-1 at a bias of 2 V for 365 nm photons, which is among the highest reported performance values for ultraviolet photodetection using titania nanotubes. Furthermore, the textured nanotubes without a Zn2+ treatment showed a significantly enhanced performance in halide perovskite solar cells that used TNTAs as the ETL.
RESUMO
As the search for efficient catalysts for CO2 photoreduction continues, nanostructured perovskite oxides have emerged as a class of high-performance photocatalytic materials. The perovskite oxide candidates for CO2 photoreduction are primarily nanostructured forms of titanates, niobates, tantalates and cobaltates. These materials form the focus of this review article because they are much sought-after due to their nontoxic nature, adequate chemical stability, and tunable crystal structures, bandgaps and surface energies. As compared to conventional semiconductors and nanomaterial catalysts, nanostructured perovskite oxides also exhibit an extended optical-absorption edge, longer charge carrier lifetimes, and favorable band-alignment with respect to reduction potential of activated CO2 and reduction products of the same. While CO2 reduction product yields of several hundred µmol-1 h-1 are observed with many types of perovskite oxide nanomaterials in stand-alone forms, yield of such quantities are not common with semiconductor nanomaterials of other types. In this review, we present current state-of-the-art synthesis methods to form perovskite oxide nanomaterials, and procedures to engineer their bandgaps. This review also presents a comprehensive summary and discussion on crystal structures, defect distribution, morphologies and electronic properties of the perovskite oxides, and correlation of these properties to CO2 photoreduction performance. This review offers researchers key insights for developing advanced perovskite oxides in order to further improve the yields of CO2 reduction products.
RESUMO
Titanium nitride (TiN) is a ceramic with high electrical conductivity which in nanoparticle form, exhibits localized surface plasmon resonances (LSPRs) in the visible region of the solar spectrum. The ceramic nature of TiN coupled with its dielectric loss factor being comparable to that of gold, render it attractive for CMOS polarizers, refractory plasmonics, surface-enhanced Raman scattering and a whole host of sensing applications. We report core-shell TiO2-TiN nanotube arrays exhibiting LSPR peaks in the range 775-830 nm achieved by a simple, solution-based, low cost, large area-compatible fabrication route that does not involve laser-writing or lithography. Self-organized, highly ordered TiO2 nanotube arrays were grown by electrochemical anodization of Ti thin films on fluorine-doped tin oxide-coated glass substrates and then conformally coated with a thin layer of TiN using atomic layer deposition. The effects of varying the TiN layer thickness and thermal annealing on the LSPR profiles were also investigated. Modeling the TiO2-TiN core-shell nanotube structure using two different approaches, one employing effective medium approximations coupled with Fresnel coefficients, resulted in calculated optical spectra that closely matched the experimentally measured spectra. Modeling provided the insight that the observed near-infrared resonance was not collective in nature, and was mainly attributable to the longitudinal resonance of annular nanotube-like TiN particles redshifted due to the presence of the higher permittivity TiO2 matrix. The resulting TiO2-TiN core-shell nanotube structures also function as visible light responsive photocatalysts, as evidenced by their photoelectrochemical water-splitting performance under light emitting diode illumination using 400, 430 and 500 nm photons.