Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 10 de 10
Filtrar
1.
Arthroscopy ; 2024 May 07.
Artigo em Inglês | MEDLINE | ID: mdl-38719177

RESUMO

PURPOSE: To evaluate the effectiveness of marrow stimulation (MS) versus biphasic scaffold loaded with autologous cartilage (scaffold) in treating focal osteochondral lesions of the knee. METHODS: In total, 54 patients with symptomatic focal chondral or osteochondral lesion in the knee were randomized to either the scaffold group or the MS group. International Knee Documentation Committee subjective score, the Knee Injury Osteoarthritis Outcome Score, and magnetic resonance imaging (MRI) were assessed preoperatively and at 1 and 2 years after operation to compare treatment outcomes. Biopsy and second-look arthroscopy were performed at 1 year postoperatively for consenting patients. RESULTS: There were 27 patients (mean age 31.33 ± 10.95 years) in the scaffold group, and 27 patients (31.74 ± 11.44) in the MS group. The scaffold group and the MS group both included 23 patients with lesions ≤12.5 × 12.5 mm2 mm in size. In addition, each group had 4 patients with lesions between than 12.5 × 12.5 mm2 and ≤12.5 × 25 mm2. Both interventions achieved significant improvement in clinical outcome scores at 2 years. The scaffold group had greater International Knee Documentation Committee score than the MS group at 2 years (93.85 ± 9.55 vs 92.11 ± 9.84) and in the Symptoms/Stiffness and Sport/Recreation subscales of Knee Injury Osteoarthritis Outcome Score at 2 years (96.57 ± 5.97 vs 93.57 ± 6.52, P < .05) and (90.2 ± 17.76 vs 82.8 ± 16.08, P < .05). CONCLUSIONS: The use of biphasic scaffold loaded with autologous cartilage in treating focal osteochondral lesions demonstrates superior clinical outcomes and better cartilage refill on magnetic resonance imaging at the 2-year follow-up compared to marrow stimulation. LEVEL OF EVIDENCE: Level I, Randomized controlled trial.

2.
Arthroscopy ; 37(8): 2420-2431, 2021 08.
Artigo em Inglês | MEDLINE | ID: mdl-33864834

RESUMO

PURPOSE: To retrospectively assess the clinical outcomes of the patients with large to massive reparable RCTs treated by arthroscopic rotator cuff repair (ARCR) combined with modified superior capsule reconstruction (mSCR) using the long head of biceps tendon (LHBT) as reinforcement with a minimum of 2 years of follow-up. METHODS: We retrospectively evaluated 40 patients with large to massive reparable RCTs who underwent ARCR and mSCR (group I) between February 2017 and June 2018 (18 patients) or underwent ARCR and tenotomy of LHBT performed at the insertion site (group II) between January 2015 and January 2017 (22 patients). The pain visual analog score (VAS) was assessed preoperatively and 1, 3, 6, 12, 24 months postoperatively. American Shoulder and Elbow Surgeons (ASES) scores, the University of California, Los Angeles (UCLA) shoulder rating scale, and active range of motion (AROM) were assessed before surgery and 6, 12, and 24 months after surgery. The integrity of the rotator cuff and mSCR was evaluated using magnetic resonance images at 12 months postoperatively. RESULTS: After surgery, both groups had significantly improved in VAS, ASES, UCLA and AROM scores in the final follow-up. There were no significant between-group differences in the characteristics of the patients before surgery. Group I had improved pain relief at 1 month (P < .001) and at 3 months (P < .01) after surgery. For the AROM, group I (flexion, external rotation, internal rotation) demonstrated better improvement than group II 6 months after surgery (all P < .05) and better internal rotation 12 and 24 months after surgery (all P < .05). The mSCR survival rate was 94.4% (17/18). The retear rate of repaired rotator cuffs for groups I and II was 16.7% (3/18) and 40.9% (9/22), respectively, and the differences were significant (P < .046). CONCLUSIONS: ARCR combined with mSCR using LHBT as reinforcement may lead to a lower retear rate and earlier functional recovery than conventional ARCR with tenotomy of LHBT for large to massive reparable RCTs. LEVEL OF EVIDENCE: Level III, retrospective therapeutic comparative trial.


Assuntos
Lesões do Manguito Rotador , Articulação do Ombro , Artroscopia , Cotovelo , Humanos , Imageamento por Ressonância Magnética , Amplitude de Movimento Articular , Estudos Retrospectivos , Manguito Rotador/cirurgia , Lesões do Manguito Rotador/cirurgia , Tendões/cirurgia , Resultado do Tratamento
3.
Nat Mater ; 18(6): 594-601, 2019 06.
Artigo em Inglês | MEDLINE | ID: mdl-30988452

RESUMO

Stretchable semiconducting polymers have been developed as a key component to enable skin-like wearable electronics, but their electrical performance must be improved to enable more advanced functionalities. Here, we report a solution processing approach that can achieve multi-scale ordering and alignment of conjugated polymers in stretchable semiconductors to substantially improve their charge carrier mobility. Using solution shearing with a patterned microtrench coating blade, macroscale alignment of conjugated-polymer nanostructures was achieved along the charge transport direction. In conjunction, the nanoscale spatial confinement aligns chain conformation and promotes short-range π-π ordering, substantially reducing the energetic barrier for charge carrier transport. As a result, the mobilities of stretchable conjugated-polymer films have been enhanced up to threefold and maintained under a strain up to 100%. This method may also serve as the basis for large-area manufacturing of stretchable semiconducting films, as demonstrated by the roll-to-roll coating of metre-scale films.

4.
Proc Natl Acad Sci U S A ; 114(20): 5107-5112, 2017 05 16.
Artigo em Inglês | MEDLINE | ID: mdl-28461459

RESUMO

Increasing performance demands and shorter use lifetimes of consumer electronics have resulted in the rapid growth of electronic waste. Currently, consumer electronics are typically made with nondecomposable, nonbiocompatible, and sometimes even toxic materials, leading to serious ecological challenges worldwide. Here, we report an example of totally disintegrable and biocompatible semiconducting polymers for thin-film transistors. The polymer consists of reversible imine bonds and building blocks that can be easily decomposed under mild acidic conditions. In addition, an ultrathin (800-nm) biodegradable cellulose substrate with high chemical and thermal stability is developed. Coupled with iron electrodes, we have successfully fabricated fully disintegrable and biocompatible polymer transistors. Furthermore, disintegrable and biocompatible pseudo-complementary metal-oxide-semiconductor (CMOS) flexible circuits are demonstrated. These flexible circuits are ultrathin (<1 µm) and ultralightweight (∼2 g/m2) with low operating voltage (4 V), yielding potential applications of these disintegrable semiconducting polymers in low-cost, biocompatible, and ultralightweight transient electronics.


Assuntos
Materiais Biocompatíveis/química , Plásticos Biodegradáveis/química , Celulose/química , Semicondutores , Eletrodos
5.
BMC Musculoskelet Disord ; 20(1): 482, 2019 Oct 27.
Artigo em Inglês | MEDLINE | ID: mdl-31656189

RESUMO

BACKGROUND: Occult and missed surgical neck fractures can be found in patients diagnosed with isolated greater tuberosity (GT) fracture during the follow up period. The purpose of this study was to retrospectively assess the incidence rate of occult and missed surgical neck fractures in those initially diagnosed with isolated GT fracture. METHODS: Records of patients diagnosed as having an isolated GT fracture were retrieved from a database in a medical center. Two senior orthopedic surgeons blindly reviewed all images of these patients three times to classify GT fracture types (split, avulsion and depression types), and recorded any surgical neck fractures found. Then a meeting was help to confirm the fracture types and presence of surgical neck fracture. RESULTS: Occult surgical neck fractures were found in 5 out of 68 (7.4%) patients, whereas missed surgical neck fractures were found in 3 out of 68 (4.4%) patients. In total, 32 patients had split type GT fracture, 32 had avulsion type and 4 had depression type. For those with occult surgical neck fractures, 7 had the split type GT fracture, while the remaining one had the avulsion type. Although the proportion of occult surgical neck fracture was higher in the split-type GT fracture (21.9%) than in the avulsion-type GT fracture (3.1%), the difference was not statistically significant (p = 0.056). CONCLUSION: Occult humeral surgical neck fractures occurred in 7.4% of isolated greater tuberosity fractures after re-evaluation, while missed humeral surgical neck fractures occurred in 4.4%.


Assuntos
Fraturas Fechadas/epidemiologia , Fraturas do Úmero/epidemiologia , Diagnóstico Ausente/estatística & dados numéricos , Fraturas por Osteoporose/epidemiologia , Fraturas do Ombro/complicações , Adulto , Feminino , Seguimentos , Fraturas Fechadas/complicações , Fraturas Fechadas/diagnóstico , Humanos , Fraturas do Úmero/complicações , Fraturas do Úmero/diagnóstico , Úmero/diagnóstico por imagem , Úmero/lesões , Incidência , Masculino , Pessoa de Meia-Idade , Fraturas por Osteoporose/complicações , Fraturas por Osteoporose/diagnóstico , Estudos Retrospectivos
6.
Proc Natl Acad Sci U S A ; 112(18): 5561-6, 2015 May 05.
Artigo em Inglês | MEDLINE | ID: mdl-25902502

RESUMO

The electronic properties of solution-processable small-molecule organic semiconductors (OSCs) have rapidly improved in recent years, rendering them highly promising for various low-cost large-area electronic applications. However, practical applications of organic electronics require patterned and precisely registered OSC films within the transistor channel region with uniform electrical properties over a large area, a task that remains a significant challenge. Here, we present a technique termed "controlled OSC nucleation and extension for circuits" (CONNECT), which uses differential surface energy and solution shearing to simultaneously generate patterned and precisely registered OSC thin films within the channel region and with aligned crystalline domains, resulting in low device-to-device variability. We have fabricated transistor density as high as 840 dpi, with a yield of 99%. We have successfully built various logic gates and a 2-bit half-adder circuit, demonstrating the practical applicability of our technique for large-scale circuit fabrication.

7.
Arthrosc Tech ; 8(10): e1223-e1231, 2019 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-32042577

RESUMO

In large or massive rotator cuff tears, successful repairs are difficult and complication rates are high, because the torn tendon is contracted and the superior capsule is disrupted. Recent studies have shown that superior capsule reconstruction (SCR) in massive irreparable rotator cuff tears results in better clinical scores and preserves stable glenohumeral stability without significant complications. In this article, we propose a simple, efficient SCR technique to reinforce the repair of large or massive rotator cuff tears. For this technique, the long head of the biceps tendon is used as a local autograft for the SCR, therefore eliminating comorbidities related to graft harvesting. The proximal part of the long head of the biceps tendon is transposed posteriorly and fixed onto the footprint as the SCR, which not only can maintain the stability of the glenohumeral joint, but also can preserve the vascular supply to help healing.

8.
Nat Commun ; 9(1): 534, 2018 02 07.
Artigo em Inglês | MEDLINE | ID: mdl-29416035

RESUMO

The electronic devices that play a vital role in our daily life are primarily based on silicon and are thus rigid, opaque, and relatively heavy. However, new electronics relying on polymer semiconductors are opening up new application spaces like stretchable and self-healing sensors and devices, and these can facilitate the integration of such devices into our homes, our clothing, and even our bodies. While there has been tremendous interest in such technologies, the widespread adoption of these organic electronics requires low-cost manufacturing techniques. Fortunately, the realization of organic electronics can take inspiration from a technology developed since the beginning of the Common Era: printing. This review addresses the critical issues and considerations in the printing methods for organic electronics, outlines the fundamental fluid mechanics, polymer physics, and deposition parameters involved in the fabrication process, and provides future research directions for the next generation of printed polymer electronics.

9.
ACS Appl Mater Interfaces ; 8(14): 9285-96, 2016 Apr 13.
Artigo em Inglês | MEDLINE | ID: mdl-26985638

RESUMO

The alignment of organic semiconductors (OSCs) in the active layers of electronic devices can confer desirable properties, such as enhanced charge transport properties due to better ordering, charge transport anisotropy for reduced device cross-talk, and polarized light emission or absorption. The solution-based deposition of highly aligned small molecule OSCs has been widely demonstrated, but the alignment of polymeric OSCs in thin films deposited directly from solution has typically required surface templating or complex pre- or postdeposition processing. Therefore, single-step solution processing and the charge transport enhancement afforded by alignment continue to be attractive. We report here the use of solution shearing to tune the degree of alignment in poly(diketopyrrolopyrrole-terthiophene) thin films by controlling the coating speed. A maximum dichroic ratio of ∼7 was achieved on unpatterned substrates without any additional pre- or postdeposition processing. The degree of polymer alignment was found to be a competition between the shear alignment of polymer chains in solution and the complex thin film drying process. Contrary to previous reports, no charge transport anisotropy was observed because of the small crystallite size relative to the channel length, a meshlike morphology, and the likelihood of increased grain boundaries in the direction transverse to coating. In fact, the lack of aligned morphological structures, coupled with observed anisotropy in X-ray diffraction data, suggests the alignment of polymer molecules in both the crystalline and the amorphous regions of the films. The shear speed at which maximum dichroism is achieved can be controlled by altering deposition parameters such as temperature and substrate treatment. Modest changes in molecular weight showed negligible effects on alignment, while longer polymer alkyl side chains were found to reduce the degree of alignment. This work demonstrates that solution shearing can be used to tune polymer alignment in a one-step deposition process not requiring substrate patterning or any postdeposition treatment.

10.
Nat Commun ; 6: 7955, 2015 Aug 12.
Artigo em Inglês | MEDLINE | ID: mdl-26264528

RESUMO

Morphology control of solution coated solar cell materials presents a key challenge limiting their device performance and commercial viability. Here we present a new concept for controlling phase separation during solution printing using an all-polymer bulk heterojunction solar cell as a model system. The key aspect of our method lies in the design of fluid flow using a microstructured printing blade, on the basis of the hypothesis of flow-induced polymer crystallization. Our flow design resulted in a ∼90% increase in the donor thin film crystallinity and reduced microphase separated donor and acceptor domain sizes. The improved morphology enhanced all metrics of solar cell device performance across various printing conditions, specifically leading to higher short-circuit current, fill factor, open circuit voltage and significantly reduced device-to-device variation. We expect our design concept to have broad applications beyond all-polymer solar cells because of its simplicity and versatility.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA