Identification of hyperthermophilic D-allulose 3-epimerase from Thermotoga sp. and its application as a high-performance biocatalyst for D-allulose synthesis.

D-Allulose 3-epimerase (DAE) is a vital biocatalyst for the industrial synthesis of D-allulose, an ultra-low calorie rare sugar. However, limited thermostability of DAEs hinders their use at high-temperature production. In this research, hyperthermophilic TI-DAE (Tm = 98.4 ± 0.7 ℃) from Thermotoga sp. was identified via in silico screening. A comparative study of the structure and function of site-directed saturation mutagenesis mutants pinpointed the residue I100 as pivotal in maintaining the high-temperature activity and thermostability of TI-DAE. Employing TI-DAE as a biocatalyst, D-allulose was produced from D-fructose with a conversion rate of 32.5%. Moreover, TI-DAE demonstrated excellent catalytic synergy with glucose isomerase CAGI, enabling the one-step conversion of D-glucose to D-allulose with a conversion rate of 21.6%. This study offers a promising resource for the enzyme engineering of DAEs and a high-performance biocatalyst for industrial D-allulose production.

Isomerase and epimerase: overview and practical application in production of functional sugars.

The biosynthesis of functional sugars has gained significant attention due to their potential health benefits and increasing demand in the food industry. Enzymatic synthesis has emerged as a promising approach, offering high catalytic efficiency, chemoselectivity, and stereoselectivity. However, challenges such as poor thermostability, low catalytic efficiency, and food safety concerns have limited the commercial production of functional sugars. Protein engineering, including directed evolution and rational design, has shown promise in overcoming these barriers and improving biocatalysts for large-scale production. Furthermore, enzyme immobilization has proven effective in reducing costs and facilitating the production of functional sugars. To ensure food safety, the use of food-grade expression systems has been explored. However, downstream technologies, including separation, purification, and crystallization, still pose challenges in terms of efficiency and cost-effectiveness. Addressing these challenges is crucial to optimize the overall production process. Despite the obstacles, the future outlook for functional sugars is promising, driven by increasing awareness of their health benefits and continuous technological advancements. With further research and technological breakthroughs, industrial-scale production of functional sugars through biosynthesis will become a reality, leading to their widespread incorporation in various industries and products.

High-Throughput Screening of Signal Peptide Library with Novel Fluorescent Probe.

Nitrile hydratase (NHase) is an excellent biocatalyst for the synthesis of amide compounds and is composed of two heterologous subunits. However, the secretory expression of NHase has been difficult to achieve because of its complex expression mechanism. In this work, a novel fluorescent probe Rho-IDA-CoII was synthesized by a one-pot method. Rho-IDA-CoII could specifically label His-tagged proteins in vitro, such as for staining in-gel, Western blot, and ELISA analysis. Furthermore, Rho-IDA-CoII combined with dot blots could quantitatively detect His-tagged proteins at between 1-10 pmol and perform high-throughput screening for the NHase signal peptide library. Recombinant Bacillus subtilis WB800/phoB-HBA with the extracellular expression of NHase was screened (ca. 6500 clones). After optimization of fermentation conditions, the NHase activity in the culture supernatant reached 17.34±0.16 U/mL. This is the first time that secretory NHase has been expressed in B. subtilis successfully.

Structural insights into the thermostability mechanism of a nitrile hydratase from Caldalkalibacillus thermarum by comparative molecular dynamics simulation.

Nitrile hydratase (NHase), an excellent bio-catalyst for the synthesis of amide compounds, was composed of two heterologous subunits. A thermoalkaliphilic NHase NHCTA1 (Tm = 71.3°C) obtained by in silico screening in our study exhibited high flexibility of α-subunit but excellent thermostability, as opposed to previous examples. To gain a deeper structural insight into the thermostability of NHCTA1, comparative molecular dynamics simulation of NHCTA1 and reported NHases was carried out. By comparison, we speculated that ß-subunit played a key role in adjusting the flexibility of α-subunit and the different conformations of linker in "α5-helix-coil ring" supersecondary structure of ß-subunit can affect the interaction between ß-subunit and α-subunit. Mutant NHCTA1-α6 C with a random coil linker and mutant NHCTA1-αßγ with a truncated linker were therefore constructed to understand the impact on NHCTA1 thermostability by varying the supersecondary structure. The varied thermostability of NHCTA1-α6 C and NHCTA1-αßγ (Tmα6C = 74.4°C, Tmαßγ = 65.6°C) verified that the flexibility of α-subunit adjusted by ß-subunit was relevant to the stability of NHCTA1. This study gained an insight into the NNHCTA1 thermostability by virtual dynamics comparison and experimental studies without crystallization, and this approach could be applied to other industrial-important enzymes.

Nitrilase: a promising biocatalyst in industrial applications for green chemistry.

Nitrilases are widely distributed in nature and are able to hydrolyze nitriles into their corresponding carboxylic acids and ammonia. In industry, nitrilases have been used as green biocatalysts for the production of high value-added products. To date, biocatalysts are considered to be important alternatives to chemical catalysts due to increasing environmental problems and resource scarcity. This review provides an overview of recent advances of nitrilases in aspects of distribution, enzyme screening, molecular structure and catalytic mechanism, protein engineering, and their potential applications in industry.

Modification of nitrilase based on computer screening and efficient biosynthesis of 4-cyanobenzoic acid.

4-cyanobenzoic acid serves as a crucial intermediate for the synthesis of various high-value organic compounds. The enzymatic hydrolysis of terephthalonitrile to produce 4-cyanobenzoic acid using nitrilase offers the advantages of a simple reaction pathway, environmental friendliness, and easy product separation. In order to efficiently develop nitrilases that meet industrial production requirements, the virtual screening method used in the study is established and mature. From a total of 371 amino acids in the nitrilase AfNIT, which exhibits activity in terephthalonitrile hydrolysis, three candidate sites (F168, S192, and T201) were identified, and a "small and accurate" mutant library was constructed. The triple mutant F168V/T201N/S192F was screened from this small mutant library with a specific activity of 227.3 U mg-1 , which was 3.8 times higher than that of the wild-type AfNIT. Using the whole-cell biocatalyst containing the mutant F168V/T201N/S192F, terephthalonitrile was successfully hydrolyzed at a concentration of 150 g L-1 to produce 4-cyanobenzoic acid with a final yield of 170.3 g L-1 and a conversion rate of 98.7%. The obtained nitrilase mutant F168V/T201N/S192F in this study can be effectively applied in the biomanufacturing of 4-cyanobenzoic acid using terephthalonitrile as a substrate. Furthermore, the results also demonstrate the significant improvement in predictive accuracy achieved through the latest AI-assisted computer simulation methods. This approach represents a promising and feasible new technological pathway for assisting enzyme engineering research, laying a theoretical foundation for other related studies.

Enhancing the Thermal Stability and Enzyme Activity of Ketopantoate Hydroxymethyltransferase through Interface Modification Engineering.

Ketopantoate hydroxymethyltransferase (KPHMT) plays a pivotal role in d-pantothenic acid biosynthesis. Most KPHMTs are homodecamers with low thermal stability, posing challenges for protein engineering and limiting output enhancement. Previously, a high-enzyme activity KPHMT mutant (K25A/E189S) from Corynebacterium glutamicum was screened as mother strain (M0). Building upon this strain, our study focused on interface engineering modifications, employing a multifaceted approach including integrating folding-free energy calculation, B-factor analysis, and conserved site analysis. Preliminary screening led to the selection of five mutants in the interface─E106S, E98T, E98N, S247I, and S247D─showing improved thermal stability, culminating in the double-site mutant M8 (M0-E98N/S247D). M8 exhibited a T1/2 value of 288.79 min at 50 °C, showing a 3.29-fold increase compared to M0. Meanwhile, the Tm value of M8 was elevated from 53.2 to 59.6 °C. Investigations of structural and molecular dynamics simulations revealed alterations in surface electrostatic charge distribution and the formation of increased hydrogen bonds between subunits, contributing to enhanced thermal stability. This investigation corroborates the efficacy of interface engineering modifications in bolstering KPHMT stability while showing its potential for positively impacting industrial d-pantothenic acid synthesis.

Highly efficient production of rhamnolipid in P. putida using a novel sacB-based system and mixed carbon source.

Pseudomonas putida KT2440, a GRAS strain, has been used for synthesizing bulk and fine chemicals. However, the gene editing tool to metabolically engineer KT2440 showed low efficiency. In this study, a novel sacB-based system pK51mobsacB was established to improve the efficiency for marker-free gene disruption. Then the rhamnolipid synthetic pathway was introduced in KT2440 and genes of the competitive pathways were deleted to lower the metabolic burden based on pK51mobsacB. A series of endogenous and synthetic promoters were used for fine tuning rhlAB expression. The limited supply of dTDP-L-rhamnose was enhanced by heterologous rmlBDAC expression. Cell growth and rhamnolipid production were well balanced by using glucose/glycerol as mixed carbon sources. The final strain produced 3.64 g/L at shake-flask and 19.77 g/L rhamnolipid in a 5 L fermenter, the highest obtained among metabolically engineered KT2440, which implied the potential of KT2440 as a promising microbial cell factory for industrial rhamnolipid production.

Secretory production of 7-dehydrocholesterol by engineered Saccharomyces cerevisiae.

BACKGROUND: 7-Dehydrocholesterol (7-DHC) can be directly converted to vitamin D3 by UV irradiation and de novo synthesis of 7-DHC in engineered Saccharomyces cerevisiae has been recognized as an attractive substitution to traditional chemical synthesis. Introduction of sterol extracellular transport pathway for the secretory production of 7-DHC is a promising approach to achieve higher titer and simplify the downstream purification processing. METHODS AND RESULTS: A series of genes involved in ergosterol pathway were combined reinforced and reengineered in S. cerevisiae. A biphasic fermentation system was introduced and 7-DHC was found to be enriched in oil-phase with an increased titer by 1.5-folds. Quantitative PCR revealed that say1, atf2, pdr5, pry1-3 involved in sterol storage and transport were all significantly induced in sterol overproduced strain. To enhance the secretion capacity, lipid transporters of pathogen-related yeast proteins (Pry), Niemann-Pick disease type C2 (NPC2), ATP-binding cassette (ABC)-family, and their homologues were screened. Both individual and synergetic overexpression of Plant pathogenesis Related protein-1 (Pr-1) and Sterol transport1 (St1) largely increased the de novo biosynthesis and secretory productivity of 7-DHC, and the final titer reached 28.2 mg g-1 with a secretion ratio of 41.4%, which was 26.5-folds higher than the original strain. In addition, the cooperation between Pr-1 and St1 in sterol transport was further confirmed by confocal microscopy, molecular docking, and directed site-mutation. CONCLUSION: Selective secretion of different sterol intermediates was characterized in sterol over-produced strain and the extracellular export of 7-DHC developed in present study significantly improved the cell biosynthetic capacity, which offered a novel modification idea for 7-DHC de novo biosynthesis by S. cerevisiae cell factory.

Mining and Characterization of Thermophilic Glucose Isomerase Based on Virtual Probe Technology.

Fructose, which is produced by the isomerization of glucose isomerase, is a crucial precursor for the biosynthesis of rare sugars. In this study, thermophilic glucose isomerases (GI) from Caldicellulosiruptor acetigenus (CAGI), Thermoanaerobacter thermocopriae (TTGI), and Thermotoga petrophila (TPGI) were screened from GenBank database by a virtual probe and were successfully expressed in Escherichia coli BL21(DE3). The results of characterization demonstrated that the optimal pH for CAGI and TTGI were 8.0 and were maintained at 80% in a slightly acidic environment. The relative residual activities of CAGI and TTGI were found to be 40.6% and 52.6%, respectively, following an incubation period of 24 h at 90 ℃. Furthermore, CAGI and TTGI exhibited superior catalytic performance that their reaction equilibrium both reached only after an hour at 85 ℃ with 200 g/L glucose, and the highest conversion rates were 54.2% and 54.1%, respectively. This study identifies competitive enzyme candidates for fructose production in the industry with appreciable cost reduction.

Hot spot-based engineering of ketopantoate hydroxymethyltransferase for the improvement of D-pantothenic acid production in Escherichia coli.

D-Pantothenic acid (D-PA) is an essential vitamin with wide applications. However, the biotechnological production of D-PA is still not competitive with the chemical synthesis in terms of production cost. Ketopantoate hydroxymethyltransferase is a crucial enzyme in the D-PA synthetic pathway in Escherichia coli encoded by the panB gene. Here a hot spots study was applied to a ketopantoate hydroxymethyltransferase from Corynebacterium glutamicum (CgKPHMT) to relieve the product inhibitory effect and thus improve the D-PA production. Compared with the wild type, the double-site variant CgKPHMT-K25A/E189S showed 1.8 times higher enzyme activity and 2.1 times higher catalytic efficiency, 1.88 and 3.32 times higher inhibitory constant of α-ketoisovalerate and D-PA, respectively. The D-PA yield using E. coli W3110 adopted the double-site variant was 41.17 g·L-1 within 48 h, a 9.80 g·L-1 increase. Structural analysis of K25A/E189S revealed the expansion of the entry channel and the change of the electric charge from negative to uncharged due to the substitution from glutamic acid to serine at site 189. Our study emphasized the positive roles of ketopantoate hydroxymethyltransferase in D-PA production and paved the way by analyzing critical enzymes in the synthetic pathway of E. coli to increase the D-PA yield.

Proposed mechanism for post-translational self-modification of Co-NHase based on Co2+ diffusion limitation.

BACKGROUND: Nitrile hydratase (NHase), was an excellent biocatalyst for the synthesis of amide compounds. NHase was typical heterodimeric metalloprotein, required of the assistance of activator for active expressions. In this work, we found a special Co-NHase HBA from Caldalkalibacillus thermarum, which had the ability of post-translational self-modification and could incorporate Co2+ into the catalytic center in the absence of activator. METHOD AND RESULTS: We simulated the movement of Co2+ in silico and established a hypothetical model to predict the Co2+ incorporation efficiency (XCo ) of NHases. According to the simulation results, NHase mutants with different positive charge distribution were constructed. Compared with wild-type, the Co2+ incorporation efficiency of K1 (M10K) was increased by 2.1-fold from 0.36 to 0.76, and the specific activity was increased by 3.2-fold from 136.3 to 432.0 U mg-1 , while mutant K1H1 (M10K, D11H) and K2H2 (M10K, D11H, E20K, N21H) lost the ability of post-translation self-modification. CONCLUSIONS AND IMPLICATIONS: The interactions of positively charged residues near the catalytic center, such as lysine with strong electrostatic repulsive interaction, arginine with weak electrostatic repulsive interaction and histidine with metal affinity, could limit the free diffusion of Co2+ in NHase and affect the efficiency of post-translational self-modification. This work also provided an effective strategy for protein engineering of NHases and other metalloenzymes.

Improving low-temperature activity and thermostability of exo-inulinase InuAGN25 on the basis of increasing rigidity of the terminus and flexibility of the catalytic domain.

Enzymes displaying high activity at low temperatures and good thermostability are attracting attention in many studies. However, improving low-temperature activity along with the thermostability of enzymes remains challenging. In this study, the mutant Mut8S, including eight sites (N61E, K156R, P236E, T243K, D268E, T277D, Q390K, and R409D) mutated from the exo-inulinase InuAGN25, was designed on the basis of increasing the number of salt bridges through comparison between the low-temperature-active InuAGN25 and thermophilic exo-inulinases. The recombinant Mut8S, which was expressed in Escherichia coli, was digested by human rhinovirus 3 C protease to remove the amino acid fusion sequence at N-terminus, producing RfsMut8S. Compared with wild-type RfsMInuAGN25, the mutant RfsMut8S showed (1) lower root mean square deviation values, (2) lower root mean square fluctuation (RMSF) values of residues in six regions of the N and C termini but higher RMSF values in five regions of the catalytic pocket, (3) higher activity at 0-40°C, and (4) better thermostability at 50°C. This study proposes a way to increase low-temperature activity along with a thermostability improvement of exo-inulinase on the basis of increasing the rigidity of the terminus and the flexibility of the catalytic domain. These findings may prove useful in formulating rational designs for increasing the thermal performance of enzymes.

Removal of N-terminal tail changes the thermostability of the low-temperature-active exo-inulinase InuAGN25.

Exo-inulinases are members of the glycoside hydrolase family 32 and function by hydrolyzing inulin into fructose with yields up to 90-95%. The N-terminal tail contributes to enzyme thermotolerance, which plays an important role in enzyme applications. However, the role of N-terminal amino acid residues in the thermal performance and structural properties of exo-inulinases remains to be elucidated. In this study, three and six residues of the N-terminus starting from Gln23 of the exo-inulinase InuAGN25 were deleted and expressed in Escherichia coli. After digestion with human rhinovirus 3 C protease to remove the N-terminal amino acid fusion sequence that may affect the thermolability of enzymes, wild-type RfsMInuAGN25 and its mutants RfsMutNGln23Δ3 and RfsMutNGln23Δ6 were produced. Compared with RfsMInuAGN25, thermostability of RfsMutNGln23Δ3 was enhanced while that of RfsMutNGln23Δ6 was slightly reduced. Compared with the N-terminal structures of RfsMInuAGN25 and RfsMutNGln23Δ6, RfsMutNGln23Δ3 had a higher content of (1) the helix structure, (2) salt bridges (three of which were organized in a network), (3) cation-π interactions (one of which anchored the N-terminal tail). These structural properties may account for the improved thermostability of RfsMutNGln23Δ3. The study provides a better understanding of the N-terminus-function relationships that are useful for rational design of thermostability of exo-inulinases.

Biochemical and structural properties of a low-temperature-active glycoside hydrolase family 43 ß-xylosidase: Activity and instability at high neutral salt concentrations.

ß-Xylosidase, of the glycoside hydrolase family 43 from Bacillus sp. HJ14, was expressed in Escherichia coli. Recombinant ß-xylosidase (rHJ14GH43) exhibited maximum activity at 25 °C, approximately 15, 45, and 88% of maximum activity at 0, 10, and 20 °C, respectively, and poor stability at temperatures over 20 °C. rHJ14GH43 showed moderate or high activity, but poor stability, in NaCl, KCl, NaNO3, KNO3, Na2SO4, and (NH4)2SO4 at concentrations from 3.0 to 30.0% (w/v). The crystal structure of rHJ14GH43 was resolved and showed higher structural flexibility due to fewer salt bridges and hydrogen bonds compared to mesophilic and thermophilic ß-xylosidases. High structural flexibility is presumed to be a key factor for catalytic adaptations to low temperatures and high salt concentrations. Approximately one-third of the surface of rHJ14GH43 is positively charged, which may be the primary factor responsible for poor stability in high neutral salt environments.

NaCl-, protease-tolerant and cold-active endoglucanase from Paenibacillus sp. YD236 isolated from the feces of Bos frontalis.

Bos frontalis, which consumes bamboo and weeds, may have evolved unique gastrointestinal microorganisms that digest cellulase. A Paenibacillus sp. YD236 strain was isolated from B. frontalis feces, from which a GH8 endoglucanase gene, pglue8 (1107 bp, 54.5 % GC content), encoding a 368-residue polypeptide (PgluE8, 40.4 kDa) was cloned. PgluE8 efficiently hydrolyzed barley-ß-d-glucan followed by CMC-Na, soluble starch, laminarin, and glucan from black yeast optimally at pH 5.5 and 50 °C, and retained 78.6, 41.6, and 34.5 % maximum activity when assayed at 20, 10, and 0 °C, respectively. Enzyme activity remained above 176.6 % after treatment with 10.0 mM ß-mercaptoethanol, and was 83.0, 78, and 56 % after pre-incubation in 30 % (w/v) NaCl, 16.67 mg/mL trypsin, and 160.0 mg/mL protease K, respectively. Cys23 and Cys364 residues were critical for PgluE8 activity. pglue8, identified from B. frontalis feces for the first time in this study, is a potential alternative for applications including food processing, washing, and animal feed preparation.

Characterization of an exo-inulinase from Arthrobacter: a novel NaCl-tolerant exo-inulinase with high molecular mass.

A glycoside hydrolase family 32 exo-inulinase gene was cloned from Arthrobacter sp. HJ7 isolated from saline soil located in Heijing town. The gene encodes an 892-residue polypeptide with a calculated mass of 95.1 kDa and a high total frequency of amino acid residues G, A, and V (30.0%). Escherichia coli BL21 (DE3) cells were used as hosts to express the exo-inulinase gene. The recombinant exo-inulinase (rInuAHJ7) showed an apparently maximal activity at pH 5.0-5.5 and 40-45°C. The addition of 1.0 and 10.0 mM Zn(2+) and Pb(2+) had little or no effect on the enzyme activity. rInuAHJ7 exhibited good salt tolerance, retaining more than 98% inulinase activity at a concentration of 3.0%-20.0% (w/v) NaCl. Fructose was the main product of inulin, levan, and Jerusalem artichoke tubers hydrolyzed by the enzyme. The present study is the first to report the identification and characterization of an Arthrobacter sp exo-inulinase showing a high molecular mass of 95.1 kDa and NaCl tolerance. These results suggest that the exo-inulinase might be an alternative material for potential applications in processing seafood and other foods with high saline contents, such as marine algae, pickles, and sauces.

Kinetic and thermodynamic characterization of a novel low-temperature-active xylanase from Arthrobacter sp. GN16 isolated from the feces of Grus nigricollis.

We previously presented the cloning, heterologous expression, and characterization of a novel multidomain endoxylanase from Arthrobacter sp. GN16 isolated from the feces of Grus nigricollis. Molecular and biochemical characterization studies indicate that the glycoside hydrolase (GH) family 10 domain at the N-terminus of the multidomain xylanase (rXynAGN16L) is a low-temperature-active endoxylanase. Many low-temperature-active enzymes contain regions of high local flexibility related to their kinetic and thermodynamic properties compared with mesophilic and thermophilic enzymes. However, the thermodynamic property of low-temperature-active xylanases, including rXynAGN16L, has rarely been reported. In this study, the kinetic and thermodynamic properties of rXynAGN16L were determined using different substrates and temperature conditions to completely characterize its activity properties. The kinetic property of rXynAGN16L is similar to some low-temperature-active GH 10 endoxylanases. Moreover, the thermodynamic property indicates that rXynAGN16L is typically characterized as a low-temperature-active enzyme.

Molecular and biochemical characterization of a novel multidomain xylanase from Arthrobacter sp. GN16 isolated from the feces of Grus nigricollis.

A novel glycosyl hydrolase family 10 (GH 10) xylanase (XynAGN16), consisting of five domains, was revealed from the genome sequence of Arthrobacter sp. GN16 isolated from the feces of Grus nigricollis. XynAGN16 and its truncated derivatives XynAGN16L (GH 10 domain at N-terminus) and XynAGN16Lpd (GH 10 domain at N-terminus and polysaccharide deacetylases domain) were expressed in Escherichia coli and characterized. Biochemical characterizations and hydrolysis products analyses of recombinant XynAGN16L and XynAGN16Lpd showed similar features, including showing catalytic activities at 0 °C, thermolabilities at temperatures of more than 50 °C, and similar substrate specificity. However, the polysaccharide deacetylases domain improved the affinity and catalytic efficiency towards xylans of the recombinant XynAGN16Lpd. The K m and k cat/K m values of recombinant XynAGN16L towards birchwood xylan were 2.6 mg/mL and 19.5 mL/mg/s, respectively, while the two values of recombinant XynAGN16Lpd were 1.2 mg/mL and 42.7 mL/mg/s, respectively. Towards beechwood xylan, the K m and k cat/K m values of recombinant XynAGN16L were 1.8 mg/mL and 27.1 mL/mg/s, respectively, while the two values of recombinant XynAGN16Lpd were 1.0 mg/mL and 35.3 mL/mg/s, respectively. Compared with three thermophilic endoxylanases, XynAGN16L has a surface loop from A57 to Y77 and a decreased number of salt bridges.