Two diffusion photopolymer for sharp diffractive optical elements recording.

Photopolymers as recording media are widely used in optical applications. In such materials, changes in the phase of the transmittance function are generated during exposure due to refractive index and thickness modulations. These changes arise primarily as a consequence of photopolymerization and mass transport processes. Characterizing polymers' performance, for example, quantifying the value of monomer diffusion, is therefore very important. Applying index matching, the volume and surface optical effect are separated in an acrylamide/polyvinylalcohol (AA/PVA) material. Using a simplified model that includes the effects of the holes produced during polymerization, both hole and monomer diffusion are analyzed. The analysis presented indicates higher material sensitivity than previously estimated. The results also indicate the possibility of recording sharper diffractive optical elements profiles, like blazed gratings, having diffraction efficiencies higher than 80%.

Optical response of photopolymer materials for holographic data storage applications.

We briefly review the application of photopolymer recording materials in the area of holographic data storage. In particular we discuss the recent development of the Non-local Polymerisation Driven Diffusion model. Applying this model we develop simple first-order analytic expressions describing the spatial frequency response of photopolymer materials. The assumptions made in the derivation of these formulae are described and their ranges of validity are examined. The effects of particular physical parameters of a photopolymer on the material response are discussed.

3 Dimensional analysis of holographic photopolymers based memories.

One of the most interesting applications of photopolymers is as holographic recording materials for holographic memories. One of the basic requirements for this application is that the recording material thickness must be 500 microm or thicker. In recent years many 2-dimensional models have been proposed for the analysis of photopolymers. Good agreement between theoretical simulations and experimental results has been obtained for layers thinner than 200 microm. The attenuation of the light inside the material by Beer's law results in an attenuation of the index profile inside the material and in some cases the effective optical thickness of the material is lower than the physical thickness. This is an important and fundamental limitation in achieving high capacity holographic memories using photopolymers and cannot be analyzed using 2-D diffusion models. In this paper a model is proposed to describe the behavior of the photopolymers in 3-D. This model is applied to simulate the formation of profiles in depth for different photopolymer viscosities and different intensity attenuations inside the material.

Blue light from light-emitting diodes directed at a single eye elicits a dose-dependent suppression of melatonin in horses.

The production of melatonin during night-time hours decodes day length for seasonally breeding animals. The use of artificial light to advance the breeding season in mares is common practice within the equine industry. Four healthy Thoroughbred mares were used to evaluate the minimum intensity of light required to inhibit serum melatonin. Mares were fitted with indwelling jugular catheters and using a crossover design blood samples were collected following 1h exposure to light (barn lighting approximately 200 lux), dark (<0.1 lux), and 3, 10, 50, and 100 lux intensities. The light source was a light-emitting diode (LED; 468 nm) directed at either a single eye or both eyes. All treatments, except the sample collected after 1 h exposure to light, occurred during the dark phase of the 24 h cycle. Serum melatonin levels were determined by radioimmunoassay. Two-way repeated measures ANOVA revealed that there was no difference between the level of melatonin inhibition achieved when light was administered to one or two eyes (P = 0.7028). One-way ANOVA of melatonin levels at light intensities of 10, 50 and 100 lux were significantly different to dark (P < 0.05) and not different to light (P > 0.05) intensities. There was no difference between melatonin levels at 3 lux (P > 0.05) and dark intensities. The threshold level of low wavelength light required to inhibit melatonin production in the horse lies between 3 and 10 lux. Melatonin inhibition can be achieved by exposing a single eye to low wavelength blue light. This is a novel finding with important implications for management of artificial lighting regimens in horses.

Spread-space spread-spectrum technique for secure multiplexing.

A novel technique for multiplexing complex images is proposed in which each image may be demultiplexed only if a set of random encryption keys is known. The technique utilizes the ability of the double random phase encoding method to spread a signals' energy in both the space and the spatial frequency domains in a controlled manner. To multiplex, images are independently encrypted with different phase keys and then superimposed by recording sequentially on the same material. Each image is extracted by using the particular key associated with it. During decryption the energy from the other images is further spread, making it possible to minimize its effects by using suitable filters. Wigner analysis is applied to the technique, and numerical results are presented.

Holographic interferometry and the fractional Fourier transformation.

The fractional Fourier transform (FRT) is shown to be of potential use in analyzing the motion of a surface by use of holographic interferometry. The extra degree of freedom made available by the use of the FRT allows information regarding both translational and tilting motion to be obtained in an efficient manner.

Optical image encryption by random shifting in fractional Fourier domains.

A number of methods have recently been proposed in the literature for the encryption of two-dimensional information by use of optical systems based on the fractional Fourier transform. Typically, these methods require random phase screen keys for decrypting the data, which must be stored at the receiver and must be carefully aligned with the received encrypted data. A new technique based on a random shifting, or jigsaw, algorithm is proposed. This method does not require the use of phase keys. The image is encrypted by juxtaposition of sections of the image in fractional Fourier domains. The new method has been compared with existing methods and shows comparable or superior robustness to blind decryption. Optical implementation is discussed, and the sensitivity of the various encryption keys to blind decryption is examined.

Dielectric binary blazed gratings.

Artificial index gratings, which are composed of binary microstructures of sizes less than the incident wavelength, are analyzed as functions of the filling factor or duty cycle of the microstructures. Different models for calculating the optimum duty cycles to produce high blazed diffraction efficiency are compared. Blazed binary grating designs in a material with a refractive index n = 2 show theoretical diffraction efficiencies as high as η = 80%. In the semiconductor material silicon, which has a refractive index n = 3.4, theoretical diffraction efficiencies as high as η = 70% are predicted.

Binary blazed reflection gratings.

A reflection grating with a binary surface profile is presented that has high diffraction efficiency. The measured intensity for the + 1st diffracted order was 77%. The binary grating is composed of a minilattice with feature sizes comparable with the wavelength of the incident light. The overall structure is designed in such a way that it imitates a conventional blazed grating. The grating also has interesting polarization properties. The main part of the TE-polarized light is diffracted into the 1st diffracted order, and most of the TM-polarized light remains in the 0th diffracted order. The measurements of the grating are compared with rigorous diffraction theory and found to be in reasonable agreement.

Diffractive beam splitter for laser Doppler velocimetry.

A miniaturized sensor head for the optical measurement of velocities of fluids based on laser Doppler velocimetry is demonstrated. Holographic optical elements mounted on a glass substrate are used for beam splitting and deflection. Volume holograms in dichromated gelatin exhibit good optical efficiency (75% transmission of a cascade of two holographic optical elements). With diffractive devices one can achieve achromatic behavior that makes the sensor insensitive to wavelength drifts or mode hopping of a semiconductor laser.