RESUMO
Lithium (Li) metal batteries (LMBs) face huge challenges to achieve long cycling life at wide temperature range owing to the severe dendrite growth at subambient temperature and the intense side reactions with electrolyte at high temperature. Herein, an ultrathin LiBO2 layer with an extremely high Young's modulus of 8.0 GPa is constructed on Li anode via an in situ reaction between Li metal and 4,4,5,5-tetramethyl-1,3,2-dioxa-borolane (TDB) to form LiBO2 @Li anode, which presents two times higher exchange current density than pristine Li anode. The LiBO2 layer presents a strong absorption to Li ions and greatly improves the interfacial dynamics of Li-ion migration, which induces homogenous lithium nucleation and deposition to form a dense lithium layer. Consequently, the Li dendrite growth during cycling at subambient temperature and the side reactions with electrolyte at high temperature are simultaneously suppressed. The LiBO2 @Li/LiNi0.8 Co0.1 Mn0.1 O2 (NCM811) full batteries with limited Li capacity and high cathode mass loading of 9.9 mg cm-2 can steadily cycle for 300 cycles with a capacity retention of 86.6%. The LiBO2 @Li/NCM811 full batteries and LiBO2 @Li/LiBO2 @Li symmetric batteries also present excellent cycling performance at both -20 and 60 °C. This work develops a strategy to achieve outstanding performance of LMBs at wide working temperature-range.
RESUMO
Constructing stable surface modification layer is an effective strategy to suppress dendrite growth and side reactions of Zinc (Zn) metal anode in aqueous Zn-ion battery. Herein, a multicomponent Cu-Zn alloy interlayer with superior Zn affinity, high toughness and effective inhibition effect on lattice distortion is constructed on Zn foil (Cu-Zn@Zn) to fabricate ultra-stable Zn metal anode. Owning to the advantages of high binding energy of Cu-Zn alloy layer with Zn atoms and less contact area between metallic Zn and electrolyte, the as-prepared Cu-Zn@Zn electrode not only restricts the aggregation of Zn atoms, but also suppresses the pernicious hydrogen evolution and corrosion, leading to homogeneous Zn deposition and outstanding electrochemical performances. Accordingly, the symmetric battery with Cu-Zn@Zn electrode exhibits an ultra-long cycle life of 5496â h at 1â mA cm-2 for 1â mAh cm-2 , and the Cu-Zn@Zn//V2 O5 pouch cell demonstrates excellent cycling stability with a capacity retention of 88 % after 600 cycles.
RESUMO
Severe interfacial side reactions of polymer electrolyte with LiNi0.8 Co0.1 Mn0.1 O2 (NCM811) cathode and Li metal anode restrict the cycling performance of solid-state NCM811/Li batteries. Herein, we propose a chemically stable ceramic-polymer-anchored solvent composite electrolyte with high ionic conductivity of 6.0×10-4 â S cm-1 , which enables the solid-state NCM811/Li batteries to cycle 1500 times. The Li1.4 Al0.4 Ti1.6 (PO4 )3 nanowires (LNs) can tightly anchor the essential N, N-dimethylformamide (DMF) in poly(vinylidene fluoride) (PVDF), greatly enhancing its electrochemical stability and suppressing the side reactions. We identify the ceramic-polymer-liquid multiple ion transport mechanism of the LNs-PVDF-DMF composite electrolyte by tracking the 6 Li and 7 Li substitution behavior via solid-state NMR. The stable interface chemistry and efficient ion transport of LNs-PVDF-DMF contribute to superior performances of the solid-state batteries at wide temperature range of -20-60 °C.
RESUMO
Lithium (Li) metal is promising for high energy density batteries due to its low electrochemical potential (-3.04 V) and high specific capacity (3860 mAh g-1 ). However, the safety issues impede the commercialization of Li anode batteries. In this work, research of hierarchical structure designs for Li anodes to suppress Li dendrite growth and alleviate volume expansion from the interior (by the 3D current collector and host matrix) to the exterior (by the artificial solid electrolyte interphase (SEI), protective layer, separator, and solid state electrolyte) is concluded. The basic principles for achieving Li dendrite and volume expansion free Li anode are summarized. Following these principles, 3D porous current collector and host matrix are designed to suppress the Li dendrite growth from the interior. Second, artificial SEI, the protective layer, and separator as well as solid-state electrolyte are constructed to regulate the distribution of current and control the Li nucleation and deposition homogeneously for suppressing the Li dendrite growth from exterior of Li anode. Ultimately, this work puts forward that it is significant to combine the Li dendrite suppression strategies from the interior to exterior by 3D hierarchical structure designs and Li metal modification to achieve excellent cycling and safety performance of Li metal batteries.
RESUMO
The ionic conductivity of composite solid-state electrolytes does not meet the application requirements of solid-state lithium (Li) metal batteries owing to the harsh space charge layer of different phases and low concentration of movable Li+. Herein, we propose a robust strategy for creating high-throughput Li+ transport pathways by coupling the ceramic dielectric and electrolyte to overcome the low ionic conductivity challenge of composite solid-state electrolytes. A highly conductive and dielectric composite solid-state electrolyte is constructed by compositing the poly(vinylidene difluoride) matrix and the BaTiO3-Li0.33La0.56TiO3-x nanowires with a side-by-side heterojunction structure (PVBL). The polarized dielectric BaTiO3 greatly promotes the dissociation of Li salt to produce more movable Li+, which locally and spontaneously transfers across the interface to coupled Li0.33La0.56TiO3-x for highly efficient transport. The BaTiO3-Li0.33La0.56TiO3-x effectively restrains the formation of the space charge layer with poly(vinylidene difluoride). These coupling effects contribute to a quite high ionic conductivity (8.2 × 10-4 S cm-1) and lithium transference number (0.57) of the PVBL at 25 °C. The PVBL also homogenizes the interfacial electric field with electrodes. The LiNi0.8Co0.1Mn0.1O2/PVBL/Li solid-state batteries stably cycle 1,500 times at a current density of 180 mA g-1, and pouch batteries also exhibit an excellent electrochemical and safety performance.
Assuntos
Eletrólitos , Lítio , Íons , MetaisRESUMO
The composite Ni-Cr-Mo covering layers with excellent corrosion and wear resistance are deposited by plasma transferred arc (PTA), which can improve the service life of ships and solve the corrosion and wear problems of mechanized boats. The effects of Mo on the microstructure, hardness and corrosion resistance of covering layers were analyzed by OM, SEM, XRD, EDS, a micro hardness test, a friction test and a corrosion-resistance test. The results show that the structure of covering layers change and the austenite precipitates become granular with an increase of Mo content. In addition, the corrosion and wear resistance of covering layers are improved and the sample with 5% content of Mo has the best wear and corrosion resistance.
RESUMO
A high-performance modified lignin adsorbent was prepared through coprecipitation of ferrous, ferric, and permanganate with lignin in sodium hydroxide solution. The structural characteristics of the synthesized lignin-Fe/Mn binary oxide blend nanocomposite (L-F/M) and its performance on the methylene blue (MB) removal from aqueous solution were evaluated. Influence factors of adsorption effects were analyzed including pH, contact time, dye concentration, temperature, and thermodynamics. The pseudo-second-order kinetic model well described the adsorption kinetics, and the adsorption isotherms best fitted the Langmuir model with a maximum adsorption capacity of 252.05 mg g-1 at 298 K. The adsorption mechanism showed that the L-F/M introduced the metallic element and negative charges to the lignin surface, which improved the adherence of MB via hydrogen bonding, electrostatic interaction, and coordination. Moreover, the removal ratio of MB maintained 81.2% after being used in five adsorption-desorption cycles. Results indicated that the L-F/M obtained was an efficient candidate for dye wastewater treatment.