Spiral-Driven Vertical Conductivity in Nanocrystalline Graphene.

The structure of graphene grown in chemical vapor deposition (CVD) is sensitive to the growth condition, particularly the substrate. The conventional growth of high-quality graphene via the Cu-catalyzed cracking of hydrocarbon species has been extensively studied; however, the direct growth on noncatalytic substrates, for practical applications of graphene such as current Si technologies, remains unexplored. In this study, nanocrystalline graphene (nc-G) spirals are produced on noncatalytic substrates by inductively coupled plasma CVD. The enhanced out-of-plane electrical conductivity is achieved by a spiral-driven continuous current pathway from bottom to top layer. Furthermore, some neighboring nc-G spirals exhibit a homogeneous electrical conductance, which is not common for stacked graphene structure. Klein-edge structure developed at the edge of nc-Gs, which can easily form covalent bonding, is thought to be responsible for the uniform conductance of nc-G aggregates. These results have important implications for practical applications of graphene with vertical conductivity realized through spiral structure.

Anisotropic Angstrom-Wide Conductive Channels in Black Phosphorus by Top-down Cu Intercalation.

Intercalation in black phosphorus (BP) can induce and modulate a variety of the properties including superconductivity like other two-dimensional (2D) materials. In this perspective, spatially controlled intercalation has the possibility to incorporate different properties into a single crystal of BP. We demonstrate anisotropic angstrom-wide (∼4.3 Å) Cu intercalation in BP, where Cu atoms are intercalated along a zigzag direction of BP because of its inherent anisotropy. With atomic structure, its microstructural effects, arising from the angstrom-wide Cu intercalation, were investigated and extended to relation with macrostructure. As the intercalation mechanism, it was revealed by in situ transmission electron microscopy and theoretical calculation that Cu atoms are intercalated through top-down direction of BP. The Cu intercalation anisotropically induces transition of angstrom-wide electronic channels from semiconductor to semimetal in BP. Our findings throw light on the fundamental relationship between microstructure changes and properties in intercalated BP, and tailoring anisotropic 2D materials at angstrom scale.

Unveiling 79-Year-Old Ixene and Its BN-Doped Derivative.

Polycyclic aromatic hydrocarbons (PAHs) are key components of organic electronics. The electronic properties of these carbon-rich materials can be controlled through doping with heteroatoms such as B and N, however, few convenient syntheses of BN-doped PAHs have been reported. Described herein is the rationally designed, two-step syntheses of previously unknown ixene and BN-doped ixene (B2 N2 -ixene), and their characterizations. Compared to ixene, B2 N2 -ixene absorbs longer-wavelength light and has a smaller electrochemical energy gap. In addition to its single-crystal structure, scanning tunneling microscopy revealed that B2 N2 -ixene adopts a nonplanar geometry on a Au(111) surface. The experimentally obtained electronic structure of B2 N2 -ixene and the effect of BN-doping were confirmed by DFT calculations. This synthesis enables the efficient and convenient construction of BN-doped systems with extended π-conjugation that can be used in versatile organic electronics applications.

Two-dimensional polyaniline (C3N) from carbonized organic single crystals in solid state.

The formation of 2D polyaniline (PANI) has attracted considerable interest due to its expected electronic and optoelectronic properties. Although PANI was discovered over 150 y ago, obtaining an atomically well-defined 2D PANI framework has been a longstanding challenge. Here, we describe the synthesis of 2D PANI via the direct pyrolysis of hexaaminobenzene trihydrochloride single crystals in solid state. The 2D PANI consists of three phenyl rings sharing six nitrogen atoms, and its structural unit has the empirical formula of C3N. The topological and electronic structures of the 2D PANI were revealed by scanning tunneling microscopy and scanning tunneling spectroscopy combined with a first-principle density functional theory calculation. The electronic properties of pristine 2D PANI films (undoped) showed ambipolar behaviors with a Dirac point of -37 V and an average conductivity of 0.72 S/cm. After doping with hydrochloric acid, the conductivity jumped to 1.41 × 10(3) S/cm, which is the highest value for doped PANI reported to date. Although the structure of 2D PANI is analogous to graphene, it contains uniformly distributed nitrogen atoms for multifunctionality; hence, we anticipate that 2D PANI has strong potential, from wet chemistry to device applications, beyond linear PANI and other 2D materials.

Catalytic Conversion of Hexagonal Boron Nitride to Graphene for In-Plane Heterostructures.

Heterostructures of hexagonal boron nitride (h-BN) and graphene have attracted a great deal of attention for potential applications in 2D materials. Although several methods have been developed to produce this material through the partial substitution reaction of graphene, the reverse reaction has not been reported. Though the endothermic nature of this reaction might account for the difficulty and previous absence of such a process, we report herein a new chemical route in which the Pt substrate plays a catalytic role. We propose that this reaction proceeds through h-BN hydrogenation; subsequent graphene growth quickly replaces the initially etched region. Importantly, this conversion reaction enables the controlled formation of patterned in-plane graphene/h-BN heterostructures, without needing the commonly employed protecting mask, simply by using a patterned Pt substrate.

Controlled dissolution of a single ion from a salt interface.

Interactions between monatomic ions and water molecules are fundamental to understanding the hydration of complex polyatomic ions and ionic process. Among the simplest and well-established ion-related reactions is dissolution of salt in water, which is an endothermic process requiring an increase in entropy. Extensive efforts have been made to date; however, most studies at single-ion level have been limited to theoretical approaches. Here, we demonstrate the salt dissolution process by manipulating a single water molecule at an under-coordinated site of a sodium chloride film. Manipulation of molecule in a controlled manner enables us to understand ion-water interaction as well as dynamics of water molecules at NaCl interfaces, which are responsible for the selective dissolution of anions. The water dipole polarizes the anion in the NaCl ionic crystal, resulting in strong anion-water interaction and weakening of the ionic bonds. Our results provide insights into a simple but important elementary step of the single-ion chemistry, which may be useful in ion-related sciences and technologies.

In situ observations of gas phase dynamics during graphene growth using solid-state carbon sources.

A single-layer graphene has been uniformly grown on a Cu surface at elevated temperatures by thermal processing of a poly(methyl methacrylate) (PMMA) film in a rapid thermal annealing (RTA) system under vacuum. The detailed chemistry of the transition from solid-state carbon to graphene on the catalytic Cu surface was investigated by performing in situ residual gas analysis while PMMA/Cu-foil samples were being heated, in conjunction with interrupted growth studies to reconstruct ex situ the heating process. The data clearly show that the formation of graphene occurs by vaporizing hydrocarbon molecules from PMMA, such as methane and/or methyl radicals, which act as precursors, rather than by the direct graphitization of solid-state carbon. We also found that the temperature for vaporizing hydrocarbon molecules from PMMA and the length of time the gaseous hydrocarbon atmosphere is maintained, which are dependent on both the heating temperature profile and the amount of a solid carbon feedstock, are the dominant factors that determine the crystalline quality of the resulting graphene film. Under optimal growth conditions, the PMMA-derived graphene was found to have a carrier (hole) mobility as high as ∼2700 cm(2) V(-1) s(-1) at room temperature, which is superior to common graphene converted from solid carbon.

Ligand field effect at oxide-metal interface on the chemical reactivity of ultrathin oxide film surface.

Ultrathin oxide film is currently one of the paramount candidates for a heterogeneous catalyst because it provides an additional dimension, i.e., film thickness, to control chemical reactivity. Here, we demonstrate that the chemical reactivity of ultrathin MgO film grown on Ag(100) substrate for the dissociation of individual water molecules can be systematically controlled by interface dopants over the film thickness. Density functional theory calculations revealed that adhesion at the oxide-metal interface can be addressed by the ligand field effect and is linearly correlated with the chemical reactivity of the oxide film. In addition, our results indicate that the concentration of dopant at the interface can be controlled by tuning the drawing effect of oxide film. Our study provides not only profound insight into chemical reactivity control of ultrathin oxide film supported by a metal substrate but also an impetus for investigating ultrathin oxide films for a wider range of applications.

Combined scanning tunneling microscopy and high-resolution electron energy loss spectroscopy study on the adsorption state of CO on Ag(001).

The adsorption site and vibrational energies of CO on a clean Ag(001) surface were determined using scanning tunneling microscopy, inelastic electron tunneling spectroscopy with a scanning tunneling microscope, and high-resolution electron energy loss spectroscopy. The CO molecules were found to adsorb on the atop site of the Ag(001) surface, which was similar to their adsorption on the Cu(001) surface. The vibrational energy of the CO internal stretching mode was found to be 263 meV, which is only 3 meV less than that of CO in the gas phase. This result indicates that the CO molecules chemisorb very weakly on the Ag(001) surface.

Thermodynamic stability, spectroscopic identification, and gas storage capacity of CO2-CH4-N2 mixture gas hydrates: implications for landfill gas hydrates.

Landfill gas (LFG), which is primarily composed of CH(4), CO(2), and N(2), is produced from the anaerobic digestion of organic materials. To investigate the feasibility of the storage and transportation of LFG via the formation of hydrate, we observed the phase equilibrium behavior of CO(2)-CH(4)-N(2) mixture hydrates. When the specific molar ratio of CO(2)/CH(4) was 40/55, the equilibrium dissociation pressures were gradually shifted to higher pressures and lower temperatures as the mole fraction of N(2) increased. X-ray diffraction revealed that the CO(2)-CH(4)-N(2) mixture hydrate prepared from the CO(2)/CH(4)/N(2) (40/55/5) gas mixture formed a structure I clathrate hydrate. A combination of Raman and solid-state (13)C NMR measurements provided detailed information regarding the cage occupancy of gas molecules trapped in the hydrate frameworks. The gas storage capacity of LFG hydrates was estimated from the experimental results for the hydrate formations under two-phase equilibrium conditions. We also confirmed that trace amounts of nonmethane organic compounds do not affect the cage occupancy of gas molecules or the thermodynamic stability of LFG hydrates.

Decoupling of CVD-grown epitaxial graphene using NaCl intercalation.

The structural and electronic properties of graphene grown on catalytic metal surfaces are significantly modified via graphene-substrate interaction. To minimize the influence of the metal substrate, a dielectric buffer layer can be introduced between the graphene and metal substrate. However, the catalytic synthesis of graphene limits the potential alternatives for buffer layers. The intercalation of atoms below the graphene layer is a promising method that does not require the chemical treatment of graphene or the substrate. In this study, the electronic and structural properties of single-layer graphene (SLG) on the Cu(111) substrate intercalated with ultrathin NaCl thin films were investigated using scanning tunnelling microscopy. The intercalation of the NaCl monolayer decoupled SLG from the metal substrate, thereby producing quasi-freestanding graphene.

Activation of ultrathin oxide films for chemical reaction by interface defects.

Periodic density functional theory calculations revealed strong enhancement of chemical reactivity by defects located at the oxide-metal interface for water dissociation on ultrathin MgO films deposited on Ag(100) substrate. Accumulation of charge density at the oxide-metal interface due to irregular interface defects influences the chemical reactivity of MgO films by changing the charge distribution at the oxide surface. Our results reveal the importance of buried interface defects in controlling chemical reactions on an ultrathin oxide film supported by a metal substrate.

State-selective dissociation of a single water molecule on an ultrathin MgO film.

The interaction of water with oxide surfaces has drawn considerable interest, owing to its application to problems in diverse scientific fields. Atomic-scale insights into water molecules on the oxide surface have long been recognized as essential for a fundamental understanding of the molecular processes occurring there. Here, we report the dissociation of a single water molecule on an ultrathin MgO film using low-temperature scanning tunnelling microscopy. Two types of dissociation pathway--vibrational excitation and electronic excitation--are selectively achieved by means of injecting tunnelling electrons at the single-molecule level, resulting in different dissociated products according to the reaction paths. Our results reveal the advantage of using a MgO film, rather than bulk MgO, as a substrate in chemical reactions.

Facile room-temperature self-assembly of extended cation-free guanine-quartet network on Mo-doped Au(111) surface.

Guanine-quadruplex, consisting of several stacked guanine-quartets (GQs), has emerged as an important category of novel molecular targets with applications from nanoelectronic devices to anticancer drugs. Incorporation of metal cations into a GQ structure is utilized to form stable G-quadruplexes, while formation of a cation-free GQ network has been challenging. Here we report the room temperature (RT) molecular self-assembly of extended pristine GQ networks on an Au(111) surface. An implanted molybdenum atom within the Au(111) surface is used to nucleate and stabilize the cation-free GQ network. Additionally, decoration of the Au(111) surface with 7-armchair graphene nanoribbons (7-AGNRs) enhances the GQ domain size by suppressing the influence of the disordered phase nucleated from Au step edges. Scanning tunneling microscopy/spectroscopy (STM/STS) and density functional theory (DFT) calculations confirm the formation of GQ networks and unravel the nucleation and growth mechanism. Our work, utilizing a hetero-atom doped substrate, provides a facile approach to enhance the stability and domain size of the GQ self-assembly, which would be applicable for other molecular structures.

Two-dimensional amine and hydroxy functionalized fused aromatic covalent organic framework.

Ordered two-dimensional covalent organic frameworks (COFs) have generally been synthesized using reversible reactions. It has been difficult to synthesize a similar degree of ordered COFs using irreversible reactions. Developing COFs with a fused aromatic ring system via an irreversible reaction is highly desirable but has remained a significant challenge. Here we demonstrate a COF that can be synthesized from organic building blocks via irreversible condensation (aromatization). The as-synthesized robust fused aromatic COF (F-COF) exhibits high crystallinity. Its lattice structure is characterized by scanning tunneling microscopy and X-ray diffraction pattern. Because of its fused aromatic ring system, the F-COF structure possesses high physiochemical stability, due to the absence of hydrolysable weak covalent bonds.

Adlayer-Free Large-Area Single Crystal Graphene Grown on a Cu(111) Foil.

To date, thousands of publications have reported chemical vapor deposition growth of "single layer" graphene, but none of them has described truly single layer graphene over large area because a fraction of the area has adlayers. It is found that the amount of subsurface carbon (leading to additional nuclei) in Cu foils directly correlates with the extent of adlayer growth. Annealing in hydrogen gas atmosphere depletes the subsurface carbon in the Cu foil. Adlayer-free single crystal and polycrystalline single layer graphene films are grown on Cu(111) and polycrystalline Cu foils containing no subsurface carbon, respectively. This single crystal graphene contains parallel, centimeter-long ≈100 nm wide "folds," separated by 20 to 50 µm, while folds (and wrinkles) are distributed quasi-randomly in the polycrystalline graphene film. High-performance field-effect transistors are readily fabricated in the large regions between adjacent parallel folds in the adlayer-free single crystal graphene film.

Colossal grain growth yields single-crystal metal foils by contact-free annealing.

Single-crystal metals have distinctive properties owing to the absence of grain boundaries and strong anisotropy. Commercial single-crystal metals are usually synthesized by bulk crystal growth or by deposition of thin films onto substrates, and they are expensive and small. We prepared extremely large single-crystal metal foils by "contact-free annealing" from commercial polycrystalline foils. The colossal grain growth (up to 32 square centimeters) is achieved by minimizing contact stresses, resulting in a preferred in-plane and out-of-plane crystal orientation, and is driven by surface energy minimization during the rotation of the crystal lattice followed by "consumption" of neighboring grains. Industrial-scale production of single-crystal metal foils is possible as a result of this discovery.

Oxidation behavior of graphene-coated copper at intrinsic graphene defects of different origins.

The development of ultrathin barrier films is vital to the advanced semiconductor industry. Graphene appears to hold promise as a protective coating; however, the polycrystalline and defective nature of engineered graphene hinders its practical applications. Here, we investigate the oxidation behavior of graphene-coated Cu foils at intrinsic graphene defects of different origins. Macro-scale information regarding the spatial distribution and oxidation resistance of various graphene defects is readily obtained using optical and electron microscopies after the hot-plate annealing. The controlled oxidation experiments reveal that the degree of structural deficiency is strongly dependent on the origins of the structural defects, the crystallographic orientations of the underlying Cu grains, the growth conditions of graphene, and the kinetics of the graphene growth. The obtained experimental and theoretical results show that oxygen radicals, decomposed from water molecules in ambient air, are effectively inverted at Stone-Wales defects into the graphene/Cu interface with the assistance of facilitators.

Photo-stimulated triboelectric generation.

A new photo-stimulated triboelectric generation occurring between a metal-oxide and polyimide during friction was demonstrated. The output currents of the triboelectric nanogenerator were significantly enhanced, under light illumination, up to approximately 5 times depending on the wavelength of the light, providing a new route for energy harvesting devices as well as self-powered selective photodetectors.

Fingerprints of Multiple Electron Scatterings in Single-Layer Graphene.

The electrons in graphene exhibit unusual behaviours, which can be described by massless Dirac quasiparticles. Understanding electron scattering in graphene has been of significant importance for its future application in electronic devices because electron scattering determines electrical properties such as resistivity and electron transport. There are two types of electron scatterings in graphene: intervalley scattering and intravalley scattering. In single-layer graphene, to date, it has been difficult to observe intravalley scattering because of the suppression of backscattering resulting from the chiral nature of the electrons in graphene. Here, we report the multiple electron scattering behaviours in single-layer graphene on a metallic substrate. By applying one- and two-dimensional Fourier transforms to maps of the local density of states, we can distinguish individual scattering processes from complex interference patterns. These techniques enable us to provide direct evidence of intravalley scattering, revealing a linear dispersion relation with a Fermi velocity of ~7.4 × 10(5) m/s.