Trophic relationship between the invasive parasitic copepod Mytilicola orientalis and its native blue mussel (Mytilus edulis) host.

Invasive parasites can spill over to new hosts in invaded ecosystems with often unpredictable trophic relationships in the newly arising parasite-host interactions. In European seas, the intestinal copepod Mytilicola orientalis was co-introduced with Pacific oysters (Magallana gigas) and spilled over to native blue mussels (Mytilus edulis), with negative impacts on the condition of infected mussels. However, whether the parasite feeds on host tissue and/or stomach contents is yet unknown. To answer this question, we performed a stable isotope analysis in which we included mussel host tissue and the primary food sources of the mussels, microphytobenthos (MPB) and particulate organic matter (POM). The copepods were slightly enriched in δ15N (mean Δ15N ± s.d.; 1·22 ± 0·58‰) and δ13C (Δ13C 0·25 ± 0·32‰) with respect to their host. Stable isotope mixing models using a range of trophic fractionation factors indicated that host tissue was the main food resource with consistent additional contributions of MPB and POM. These results suggest that the trophic relationship of the invasive copepod with its mussel host is parasitic as well as commensalistic. Stable isotope studies such as this one may be a useful tool to unravel trophic relationships in new parasite-host associations in the course of invasions.

Roles of Radiolytic and Externally Generated H2 in the Corrosion of Fractured Spent Nuclear Fuel.

A 2-D model for the corrosion of spent nuclear fuel inside a failed nuclear waste container has been modified to determine the influence of various redox processes occurring within fractures in the fuel. The corrosion process is driven by reaction of the fuel with the dominant α radiolysis product, H2O2. A number of reactions are shown to moderate or suppress the corrosion rate, including H2O2 decomposition and a number of reactions involving dissolved H2 produced either by α radiolysis or by the corrosion of the steel container vessel. Both sources of H2 lead to the suppression of fuel corrosion, with their relative importance being determined by the radiation dose rate, the steel corrosion rate, and the dimensions of the fractures in the fuel. The combination of H2 from these two sources can effectively prevent corrosion when only micromolar quantities of H2 are present.

The influence of hydrogen peroxide and hydrogen on the corrosion of simulated spent nuclear fuel.

The synergistic influence between H(2)O(2) and H(2) on the corrosion of SIMFUEL (simulated spent nuclear fuel) has been studied in solutions with and without added HCO(3)(-)/CO(3)(2-). The response of the surface to increasing concentrations of added H(2)O(2) was monitored by measuring the corrosion potential in either Ar or Ar/H(2)-purged solutions. Using X-ray photoelectron spectroscopy it was shown that the extent of surface oxidation (U(V) + U(VI) content) was directly related to the corrosion potential. Variations in corrosion potential with time, redox conditions, HCO(3)(-)/CO(3)(2-) concentration, and convective conditions showed that surface oxidation induced by H(2)O(2) could be reversed by reaction with H(2), the latter reaction occurring dominantly on the noble metal particles in the SIMFUEL. For sufficiently large H(2)O(2) concentrations, the influence of H(2) was overwhelmed and irreversible oxidation of the surface to U(VI) occurred. Subsequently, corrosion was controlled by the chemical dissolution rate of this U(VI) layer.

Determination of the local corrosion rate of magnesium alloys using a shear force mounted scanning microcapillary method.

The successful development of scanning probe techniques to characterize corrosion in situ using multifunctional probes is intrinsically tied to surface topography signal decoupling from the measured electrochemical fluxes. One viable strategy is the shear force controlled scanning microcapillary method. Using this method, pulled quartz micropipettes with an aperture of 500 nm diameter were used to resolve small and large variations in topography in order to quantify the local corrosion rate of microgalvanically and galvanically corroded Mg alloys. To achieve topography monitoring of corroded surfaces, shear force feedback was employed to position the micropipette at a reproducible working height above the substrate. We present proof of concept measurements over a galvanic couple of a magnesium alloy (AE44) and mild steel along with a microgalvanically corroded ZEK100 Mg alloy, which illustrates the ability of shear force to track small (1.4 µm) and large (700 µm) topographic variations from high aspect ratio features. Furthermore, we demonstrate the robustness of the technique by acquiring topographic data for 4 mm along the magnesium-steel galvanic couple sample and a 250 × 30 µm topography map over the ZEK100 Mg alloy. All topography results were benchmarked using standard optical microscopies (profilometry and confocal laser scanning microscopy).

Raman spectroscopic studies of defect structures and phase transition in hyper-stoichiometric UO(2+x).

A method to determine the defect structures in hyper-stoichiometric UO(2+x) using a combination of XRD and Raman spectroscopy has been developed. A sequence of phase transitions, from cubic to tetragonal symmetry, occurs with increasing degree of non-stoichiometry. This sequence proceeds from a cubic phase through an intermediate t''-type tetragonal (axial ratio c/a = 1) phase to a final t-type tetragonal (c/a not = 1) phase. Four distinct structural defect regions can be identified in the stoichiometry range, UO(2) to U(3)O(7): (i) a random point defect structure (x (in UO(2+x)) < or = 0.05); (ii) a non-stoichiometry region (0.05 < or = x < or = 0.15) over which point defects are gradually eliminated and replaced by the Willis 2:2:2 cluster; (iii) a mixture of Willis and cuboctahedral clusters (0.15 < or = x < or = 0.23); (iv) the cuboctahedral cluster (x > or = 0.23). The geometry and steric arrangement of these defects is primarily determined by the concentration of the excess-oxygen interstitials.

Analyzing the influence of alloying elements and impurities on the localized reactivity of titanium grade-7 by scanning electrochemical microscopy.

Scanning electron microscopy/energy dispersive X-ray analysis (SEM/EDX) was applied to investigate the grain boundaries on ASTM grade-7 titanium (Ti-7) with a freshly polished surface, and the results showed that the alloying element, Pd, and the impurity, Fe, cosegregated to grain boundaries. Scanning electrochemical microscopy (SECM) was used to study the variations in reactivity on Ti-7 exposed to an aerated neutral solution of 0.1 M NaCl. Locations that possessed an enhanced reactivity compared to the oxide-covered (TiO(2)) surface of the grains on SECM images were proposed to be the boundaries. These areas were further activated by the application of a cathodic bias, and interconnection of the active locations allowed the construction of "grain boundary maps". Variations in surface reactivity were quantitatively analyzed by fitting probe approach curves (PACs) to curves simulated with a model based on finite element analyses using the platform of COMSOL multiphysics software. The difference in reactivity between active grain boundaries and oxide-covered grains was up to a factor of 100 on freshly polished surfaces. This difference decreased to a factor of 10-15 after longer-term exposure of the Ti-7 to the aerated solution, indicating partial passivation of the Pd/Fe-stabilized beta-phase in the grain boundaries. PAC analyses of oxide-covered grains showed that the reactivity increased logarithmically as the bias potential to the Ti-7 was decreased, consistent with reduction of the insulating TiO(2) layer to a more conductive TiOOH layer.

Development, implementation and cost-effectiveness of a protocol for review of combination diuretic prescribing.

AIMS: To determine the extent of inappropriate prescribing of combination diuretics and the cost implications of protocol implementation. METHODS: Pharmacist-run medication review clinics in two general practices in Bradford, UK. RESULTS: Sixty-one patients, mean +/- s.d. age 75.8 +/- 12.0 years, were reviewed. Thirty-six met protocol criteria; 30 (49.2%) patients had their potassium-sparing diuretics (PSDs) discontinued. Mean (95% confidence interval) reduction in serum potassium concentrations after intervention in these 30 patients was 0.26 (0.09, 0.43) mmol l(-1) (P < 0.01). Twenty-eight (93.3%) patients were within the reference range at follow-up; none was below. CONCLUSIONS: Of prescribed PSDs, 59% were found to be unnecessary. Using the developed protocol potentially improves drug safety and enables cost savings.

Milking regimes to shorten milking duration.

Four milking regimes using automatic cluster removers (ACR) were tested over a 19-week period, from mid to late lactation. Each treatment group consisted of 16 slow-milking cows. The milking regimes used were: an ACR setting of 200 ml/min (Control); raised ACR setting from 200 to 500 in steps of 100 ml/min (Raised ACR); raised ACR as above in conjunction with pre-milking teat stimulation (Raised ACR+Stim); and terminating the milking when an ACR threshold of 200 ml/min was reached or when a predetermined maximum milking duration was reached (Timer). All incremental treatments were applied in blocks of 6 or 7 weeks duration. ACR thresholds were raised from 200 to 500 ml/min without observed loss of milk production when compared with controls. However, even up to an ACR setting of 500 ml/min there was little reduction in the group milking duration even when used with teat stimulation. In contrast, the Timer treatment resulted in a 34% reduction of the maximum milking duration for the group without significant loss of milk yield. For all groups, including Control, strip yield was occasionally very high and highly variable. Willingness of cows to enter the milking platform, behaviour during milking, teat condition and incidence of mastitis were similar for all treatment groups. The results indicated that simple truncation of milking at a predetermined maximum duration could be a most potent and inexpensive method of milking a herd more quickly. Such a method could be employed by using a simple timer in any dairy regardless of the level of sophistication of the milking system.