Biodegradation of 2-methylpentane in fluid fine tailings amended with a mixture of iso-alkanes under sulfate-reducing conditions.

Anaerobic microorganisms in Canada Natural Upgrading Limited (CNUL) fluid fine tailings (FFT) are sustained by residual solvent hydrocarbons. Although FFT are methanogenic in nature, sulfate-reducing microorganisms represent a significant portion of FFT bacterial community. In this study, we examined biodegradation of three iso-alkanes (2-methylbutane, 2-methylpentane, and 3-methylpentane), representing major iso-alkanes in paraffinic solvent, in CNUL FFT under sulfate-reducing conditions. During ∼1100 days of incubation, only 2-methylpentane was degraded partially, whereas 2-methylbutane and 3-methylpentane were not degraded. During active degradation of 2-methylpentane, the bacterial community was dominated by Anaerolineaceae followed by Syntrophaceae, Peptococcaceae, Desulfobacteraceae, and Desulfobulbaceae. The archaeal community was co-dominated by acetoclastic (Methanosaetaceae) and hydrogenotrophic (Methanobacteriaceae) methanogens. This study underlines the limited capability of the microbial community indigenous to CNUL FFT in degrading recalcitrant iso-alkanes under sulfate-reducing conditions.

Characterization of Naphthenic Acids and Other Dissolved Organics in Natural Water from the Athabasca Oil Sands Region, Canada.

With growth of the Canadian oil sands industry, concerns have been raised about possible seepage of toxic oil sands process-affected water (OSPW) into the Athabasca River (AR). A sampling campaign in fall 2015 was undertaken to monitor for anthropogenic seepage while also considering natural sources. Naphthenic acids (NAs) and thousands of bitumen-derived organics were characterized in surface water, groundwater, and OSPW using a highly sensitive online solid phase extraction-HPLC-Orbitrap method. Elevated NA concentrations and bitumen-derived organics were detected in McLean Creek (30.1 µg/L) and Beaver Creek (190 µg/L), two tributaries that are physically impacted by tailings structures. This was suggestive of OSPW seepage, but conclusive differentiation of anthropogenic and natural sources remained difficult. High NA concentrations and bitumen-derived organics were also observed in natural water located far north of the industry, including exceedingly high concentrations in AR groundwater (A5w-GW, 2000 µg/L) and elevated concentration in a tributary river (Pierre River, 34.7 µg/L). Despite these evidence for both natural and anthropogenic seepage, no evidence of any bitumen-derived organics was detected at any location in AR mainstem surface water. The chemical significance of any bitumen-derived seepage to the AR was therefore minimal, and focused monitoring in tributaries will be valuable in the future.

Determinants of bacterial communities in Canadian agroforestry systems.

Land-use change is one of the most important factors influencing soil microbial communities, which play a pivotal role in most biogeochemical and ecological processes. Using agroforestry systems as a model, this study examined the effects of land uses and edaphic properties on bacterial communities in three agroforestry types covering a 270 km soil-climate gradient in Alberta, Canada. Our results demonstrate that land-use patterns exert stronger effects on soil bacterial communities than soil zones in these agroforestry systems. Plots with trees in agroforestry systems promoted greater bacterial abundance and to some extent species richness, which was associated with more nutrient-rich soil resources. While Acidobacteria, Actinobacteria and Alphaproteobacteria were the dominant bacterial phyla and subphyla across land uses, Arthrobacter, Acidobacteria_Gp16, Burkholderia, Rhodanobacter and Rhizobium were the keystone taxa in these agroforestry systems. Soil pH and carbon contents emerged as the major determinants of bacterial community characteristics. We found non-random co-occurrence and modular patterns of soil bacterial communities, and these patterns were controlled by edaphic factors and not their taxonomy. Overall, this study highlights the drivers and co-occurrence patterns of soil microbial communities in agroforestry systems.

Thermally Released Arsenic in Porewater from Sediments in the Cold Lake Area of Alberta, Canada.

Elevated arsenic (As) in aquifers in close proximity to in situ oil sands extraction in the Cold Lake area, Alberta, Canada is attributed to high temperature steam (~200 °C) injected into oil sands deposits to liquefy bitumen. Heat propagated from hot injection wells alters physicochemical properties of the surrounding sediments and associated porewater. Seven sediments from four different cores drilled up to ~300 m depth collected from different locations in the area were used to study the thermal effect (~200 °C) on As distribution in the sediments and its release into porewater. Sediments were moistened with synthetic aquifer or deionized water according to the moisture regimes present in aquitard, aquifer and fractured zones. Heat application greatly released As in the porewater (500-5200 and 1200-6600 µg L(-1)) from aquifer and fractured sediments, respectively. Mass balance of As chemical fractionation showed that ~89-100% of As in porewater was released from exchangeable and specifically adsorbed As in the sediments. Heat application also altered As distribution in the sediments releasing As from exchange surfaces and amorphous Fe oxides to soluble As fraction. The results provide great insight into As release mechanisms warranting development of strategies to mitigate groundwater As contamination during industrial operation.

Long-Term Incubation Reveals Methanogenic Biodegradation of C5 and C6 iso-Alkanes in Oil Sands Tailings.

iso-Alkanes are major components of petroleum and have been considered recalcitrant to biodegradation under methanogenic conditions. However, indigenous microbes in oil sands tailings ponds exposed to solvents rich in 2-methylbutane, 2-methylpentane, 3-methylpentane, n-pentane, and n-hexane produce methane in situ. We incubated defined mixtures of iso- or n-alkanes with mature fine tailings from two tailings ponds of different ages historically exposed to different solvents: one, ~10 years old, receiving C5-C6 paraffins and the other, ~35 years old, receiving naphtha. A lengthy incubation (>6 years) revealed iso-alkane biodegradation after lag phases of 900-1800 and ~280 days, respectively, before the onset of methanogenesis, although lag phases were shorter with n-alkanes (~650-1675 and ~170 days, respectively). 2-Methylpentane and both n-alkanes were completely depleted during ~2400 days of incubation, whereas 2-methylbutane and 3-methylpentane were partially depleted only during active degradation of 2-methylpentane, suggesting co-metabolism. In both cases, pyrotag sequencing of 16S rRNA genes showed codominance of Peptococcaceae with acetoclastic (Methanosaeta) and hydrogenotrophic (Methanoregula and Methanolinea) methanogens. These observations are important for predicting long-term greenhouse-gas emissions from oil sands tailings ponds and extend the known range of hydrocarbons susceptible to methanogenic biodegradation in petroleum-impacted anaerobic environments.

Microbial metabolism alters pore water chemistry and increases consolidation of oil sands tailings.

Tailings produced during bitumen extraction from surface-mined oil sands ores (tar sands) comprise an aqueous suspension of clay particles that remain dispersed for decades in tailings ponds. Slow consolidation of the clays hinders water recovery for reuse and retards volume reduction, thereby increasing the environmental footprint of tailings ponds. We investigated mechanisms of tailings consolidation and revealed that indigenous anaerobic microorganisms altered porewater chemistry by producing CO and CH during metabolism of acetate added as a labile carbon amendment. Entrapped biogenic CO decreased tailings pH, thereby increasing calcium (Ca) and magnesium (Mg) cations and bicarbonate (HCO) concentrations in the porewater through dissolution of carbonate minerals. Soluble ions increased the porewater ionic strength, which, with higher exchangeable Ca and Mg, decreased the diffuse double layer of clays and increased consolidation of tailings compared with unamended tailings in which little microbial activity was observed. These results are relevant to effective tailings pond management strategies.

Improvement in Harris Hip Score after cementless total hip arthroplasty in young active adults with secondary hip arthritis- A short-term follow-up result.

OBJECTIVE: To determine the improvement in Harris Hip Score after non-cemented total hip replacement in younger patients with secondary hip joint arthritis. METHODS: The quasi-experimental study was conducted at Unit I, Department of Orthopaedic Surgery and Traumatology, Mayo Hospital, Lahore, and comprised patients diagnosed clinically and radiologically as secondary hip joint arthritis from September 2009 to December 2014. Harris Hip Score was calculated pre-operatively. All patients were operated by the same surgical team. One dose of second-generation intravenous cephalosporin after test dose was given at induction of anaesthesia followed by 3 times daily postoperatively along with aminoglycosides twice daily for three days followed by oral quinolones for 2 weeks. Patients were followed up for 6 months. The improvement in hip score was classified as poor, fair, good and excellent. Data entry and analysis was done using SPSS 11.5. RESULTS: Of the 65 patients in the study, 43(66%) were male and 22(34%) were females. Right hip was involved in 40(62%) patients and 25(38%) had pathology in the left hip. Overall mean age of male and female patients was 35.69±5.55 years and 35.72±5.95 years respectively. Harris Hip score improved over 6 months from poor to fair. CONCLUSIONS: The use of non-cemented total hip arthroplasty conferred a significant improvement in function in young patients with arthritis of the hip joint.

Uncovering Anaerobic Hydrocarbon Biodegradation Pathways in Oil Sands Tailings from Two Different Tailings Ponds via Metabolite and Functional Gene Analyses.

Oil sands tailings, a slurry of alkaline water, silt, clay, unrecovered bitumen, and residual hydrocarbons generated during bitumen extraction, are contained in ponds. Indigenous microbes metabolize hydrocarbons and emit greenhouse gases from the tailings. Metabolism of hydrocarbons in tailings ponds of two operators, namely, Canadian Natural Upgrading Limited (CNUL) and Canadian Natural Resources Limited (CNRL), has not been comprehensively investigated. Previous reports have revealed sequential and preferential hydrocarbon degradation of alkanes in primary cultures established from CNUL and CNRL tailings amended separately with mixtures of hydrocarbons (n-alkanes, iso-alkanes, paraffinic solvent, or naphtha). In this study, activation pathway of hydrocarbon biodegradation in these primary cultures was investigated. The functional gene analysis revealed that fumarate addition was potentially the primary activation pathway of alkanes in all cultures. However, the metabolite analysis only detected transient succinylated 2-methylpentane and 2-methylbutane metabolites during initial methanogenic biodegradation of iso-alkanes and paraffinic solvent in all CNUL and CNRL cultures amended with iso-alkanes and paraffinic solvent. Under sulfidogenic conditions (prepared only with CNUL tailings amended with iso-alkanes), succinylated 2-methylpentane persisted throughout incubation period of ~ 1100 days, implying dead-end nature of the metabolite. Though no metabolite was detected in n-alkanes- and naphtha-amended cultures during incubation, assA/masD genes related to Peptococcaceae were amplified in all CNUL and CNRL primary cultures. The findings of this present study suggest that microbial communities in different tailings ponds can biodegrade hydrocarbons through fumarate addition as activation pathway under methanogenic and sulfidogenic conditions.

Aerobic biodegradation of cycloalkanes in non-aqueous extracted oil sands tailings.

Management of growing volumes of fluid fine tailings (FFT) is a significant challenge for oil sands industry. A potential alternative non-aqueous solvent extraction (NAE) process uses cycloalkane solvent such as cyclohexane or cyclopentane with very little water and generates smaller volumes of 'dry' solids (NAES) with residual solvent. Here we investigate remediation of NAES in a simulated bench-scale upland reclamation scenario. In the first study, microcosms with nutrient medium plus FFT as inoculum were amended with cyclohexane and incubated for ∼1 year, monitoring for cyclohexane biodegradation under aerobic conditions. Biodegradation of cyclohexane occurred under aerobic conditions with no metabolic intermediates detected. A second study using NAES mixed with FFT spiked with cyclohexane and cyclopentane, with or without additional nutrients (nitrogen and phosphorus), showed complete and rapid aerobic biodegradation of both cycloalkanes in NAES inoculated with FFT and supplemented with nutrients. 16S rRNA gene sequencing revealed dominance of Rhodoferax and members of Burkholderiaceae during aerobic cyclohexane biodegradation in FFT, and Hydrogenophaga, Acidovorax, Defluviimonas and members of Porticoccaceae during aerobic biodegradation of cyclohexane and cyclopentane in NAES inoculated with FFT and supplemented with nutrients. The findings indicate that biodegradation of cycloalkanes from NAES is possible under aerobic condition, which will contribute to the successful reclamation of oil sands tailings for land closure.

Ion-Exchange Resin/Carrageenan-Copper-Based Nanocomposite: Artificial Neural Network, Advanced Thermodynamic Profiling, and Anticoagulant Studies.

Carrageenan (CG) and ion exchange resins (IERs) are better metal chelators. Kappa (κ) CG and IERs were synthesized and subjected to copper ion (Cu2+) adsorption to obtain DMSCH/κ-Cu, DC20H/κ-Cu, and IRP69H/κ-Cu nanocomposites (NCs). The NCs were studied using statistical physics formalism (SPF) at 315-375 K and a multilayer perceptron with five input nodes. The percentage of Cu2+ uptake efficiency was used as an outcome variable. Via the grand canonical ensemble, SPF gives models for both monolayer and multilayer sorption layers. For in vitro anticoagulant activity (ACA), the activated partial thromboplastin time were calculated using 100 µL of rabbit plasma incubated at 37 °C. After 2 min, 100 L of 0.025 M CaCl2 was added, and the clotting time was recorded for each group (n = 6). The results demonstrated that the key covariables for the adsorption process were pH and concentration. The results of artificial neural network models were comparable with the experimental findings. The error rates varied between 4.3 and 1.0%. The prediction analysis results ranged from 43.6 to 89.2. The ΔG and ΔS values for IRP69H/κ-Cu obtained were -18.91 and -16.32 and 26.21 and 22.74 kJ/mol for the temperatures 315 and 345 K, respectively. Adsorbate species were perpendicular to the adsorbent surfaces, notwithstanding the apparent importance of macro- and micropore volumes. These adsorbents typically fluctuate with temperature changes and contain one or more layers of sorption. Negative and positive sorption energies correspond to endothermic and exothermic processes. The biosorption energy (E1 and E2) values in this experiment have a value of less than 23 kJ mol-1. Complex SPF models' energy distributions validate surface properties and interactions with adsorbates. At a concentration of 100 µg/mL, DC20H/κ-Cu2+ exhibited an ACA of only 8 s. These NCs demonstrated better greater ACA with the order DC20H/κ < DMSCH/κ < IRP69H/κ. More research is needed to rule out the chemical processes behind the ACA of CG/IER-Cu NCs.

Correction to "Ion-Exchange Resin/Carrageenan-Copper-Based Nanocomposite: Artificial Neural Network, Advanced Thermodynamic Profiling, and Anticoagulant Studies".

[This corrects the article DOI: 10.1021/acsomega.4c01540.].

Removal of divalent cations and oxyanions by keratin-derived sorbents: Influence of process parameters and mechanistic studies.

Keratin has become a promising adsorbing material for the removal of heavy metals from polluted water due to its environmentally benign nature, unique chemical structure, and binding ability. We developed keratin biopolymers (KBP-I, KBP-IV, KBP-V) using chicken feathers, and assessed their adsorption performance against metal-containing synthetic wastewater at varying temperatures, contact times, and pH. Initially, a multi-metal synthetic wastewater (MMSW) containing cations (Cd2+, Co2+, Ni2+) and oxyanions (CrVI, AsIII, VV) was incubated with each KBP under different sets of conditions. Temperature results exhibited that KBP-I, KBP-IV and KBP-V showed higher metals adsorption at 30 °C and 45 °C, respectively. However, the adsorption equilibrium was achieved for selective metals within 1 h of incubation time for all KBPs. For pH, no significant difference was observed in adsorption in MMSW due to buffering of pH by KBPs. To minimize buffering, KBP-IV and KBP-V were tested further for single-metal synthetic wastewater at two different pHs i.e. 5.5 and 8.5. KBP-IV and KBP-V were selected due to their buffering capacities and high adsorption abilities for oxyanions (pH 5.5) and divalent cations (pH 8.5), respectively indicating that chemical modifications changed and enhanced the functional groups of the keratin. X-ray Photoelectron Spectroscopy analysis was performed to demonstrate the adsorption mechanism (complexation/chelation, electrostatic attraction, or chemical reduction) for the removal of divalent cations and oxyanions by KBPs from MMSW. Furthermore, KBPs exhibited adsorption behavior for Ni2+ (qm = 2.2 mg g-1), Cd2+ (qm = 2.4 mg g-1), and CrVI (qm = 2.8 mg g-1) best described by Langmuir model with the coefficient of determination (R2) values >0.95 while AsIII (KF = 6.4 L/g) was fitted well to the Freundlich model with R2 value >0.98. Based on these findings, we anticipate that keratin adsorbents have the potential to employ at a large scale for water remediation.

Microbial communities involved in methane production from hydrocarbons in oil sands tailings.

Microbial metabolism of residual hydrocarbons, primarily short-chain n-alkanes and certain monoaromatic hydrocarbons, in oil sands tailings ponds produces large volumes of CH(4) in situ. We characterized the microbial communities involved in methanogenic biodegradation of whole naphtha (a bitumen extraction solvent) and its short-chain n-alkane (C(6)-C(10)) and BTEX (benzene, toluene, ethylbenzene, and xylenes) components using primary enrichment cultures derived from oil sands tailings. Clone libraries of bacterial 16S rRNA genes amplified from these enrichments showed increased proportions of two orders of Bacteria: Clostridiales and Syntrophobacterales, with Desulfotomaculum and Syntrophus/Smithella as the closest named relatives, respectively. In parallel archaeal clone libraries, sequences affiliated with cultivated acetoclastic methanogens (Methanosaetaceae) were enriched in cultures amended with n-alkanes, whereas hydrogenotrophic methanogens (Methanomicrobiales) were enriched with BTEX. Naphtha-amended cultures harbored a blend of these two archaeal communities. The results imply syntrophic oxidation of hydrocarbons in oil sands tailings, with the activities of different carbon flow pathways to CH(4) being influenced by the primary hydrocarbon substrate. These results have implications for predicting greenhouse gas emissions from oil sands tailings repositories.

Anaerobic biodegradation of longer-chain n-alkanes coupled to methane production in oil sands tailings.

Extraction of bitumen from mined oil sands ores produces enormous volumes of tailings that are stored in settling basins (current inventory ≥ 840 million m(3)). Our previous studies revealed that certain hydrocarbons (short-chain n-alkanes [C(6)-C(10)] and monoaromatics [toluene, o-xylene, m-xylene]) in residual naphtha entrained in the tailings are biodegraded to CH(4) by a consortium of microorganisms. Here we show that higher molecular weight n-alkanes (C(14), C(16), and C(18)) are also degraded under methanogenic conditions in oil sands tailings, albeit after a lengthy lag (~180 d) before the onset of methanogenesis. Gas chromatographic analyses showed that the longer-chain n-alkanes each added at ~400 mg L(-1) were completely degraded by the resident microorganisms within ~440 d at ~20 °C. 16S rRNA gene sequence analysis of clone libraries implied that the predominant pathway of longer-chain n-alkane metabolism in tailings is through syntrophic oxidation of n-alkanes coupled with CO(2) reduction to CH(4). These studies demonstrating methanogenic biodegradation of longer-chain n-alkanes by microbes native to oil sands tailings may be important for effective management of tailings and greenhouse gas emissions from tailings ponds.

Functional and Radiological Outcome in Delayed Presenting Closed Displaced Lateral Condyle Fracture of Humerus in Children.

This prospective cohort study was conducted from  July 2013 to May 2019. The functional and radiological outcome in displaced, neglected fracture of lateral condyle of the humerus treated with open reduction and internal fixation (ORIF) with Kirschner wire was assessed. The sample size was 44 children aged between 2 to 15 years Milch type I and II displaced lateral condyle of humerus fracture, four weeks and older were included. Carrying angle and infection was assessed clinically. Union and elbow functions were evaluated radiologically using the Mayo elbow score. The mean age of the children was 6.82 ± 2.83 years. Fracture was Milch type I in 11 (25%), and type II in 33 (75%). Pre- and post-operatively, Mayo elbow score was 3.63 ± 0.57 and 1.56 ± 0.50, respectively. Good to excellent functional outcome, and union was observed in delayed presenting lateral condyle of humerus fractures. Key Words: Lateral condyle humerus, Children, Delayed presentation, Mayo elbow score.

Methanogenic Biodegradation of iso-Alkanes by Indigenous Microbes from Two Different Oil Sands Tailings Ponds.

iso-Alkanes, a major fraction of the solvents used in bitumen extraction from oil sand ores, are slow to biodegrade in anaerobic tailings ponds. We investigated methanogenic biodegradation of iso-alkane mixtures comprising either three (2-methylbutane, 2-methylpentane, 3-methylpentane) or five (2-methylbutane, 2-methylpentane, 2-methylhexane, 2-methylheptane, 2-methyloctane) iso-alkanes representing paraffinic and naphtha solvents, respectively. Mature fine tailings (MFT) collected from two tailings ponds, having different residual solvents (paraffinic solvent in Canadian Natural Upgrading Limited (CNUL) and naphtha in Canadian Natural Resources Limited (CNRL)), were amended separately with the two mixtures and incubated in microcosms for ~1600 d. The indigenous microbes in CNUL MFT produced methane from the three-iso-alkane mixture after a lag of ~200 d, completely depleting 2-methylpentane while partially depleting 2-methylbutane and 3-methylpentane. CNRL MFT exhibited a similar degradation pattern for the three iso-alkanes after a lag phase of ~700 d, but required 1200 d before beginning to produce methane from the five-iso-alkane mixture, preferentially depleting components in the order of decreasing carbon chain length. Peptococcaceae members were key iso-alkane-degraders in both CNUL and CNRL MFT but were associated with different archaeal partners. Co-dominance of acetoclastic (Methanosaeta) and hydrogenotrophic (Methanolinea and Methanoregula) methanogens was observed in CNUL MFT during biodegradation of three-iso-alkanes whereas CNRL MFT was enriched in Methanoregula during biodegradation of three-iso-alkanes and in Methanosaeta with five-iso-alkanes. This study highlights the different responses of indigenous methanogenic microbial communities in different oil sands tailings ponds to iso-alkanes.

Feather keratin derived sorbents for the treatment of wastewater produced during energy generation processes.

Water dependency of energy generation systems including renewable energy resources pollute water. Efforts are being made to control energy-related water pollution. Here in, eight keratin derived biopolymers were developed to sequester the toxic trace elements from synthetic wastewater. Chemical modifications of biopolymers affect their physical and chemical characteristics, hence, enhance the sorption of contaminants from wastewaters. KBP-I (processed chicken feathers), KBP-II (acid modified), KBP-III & KBP-IV (modified with ionic liquids), KBP-V (amine modified), KBP-VI & KBP-VII (POSS modified) and KBP-VIII (sodium sulfite modified) were characterised for their surface morphology, structural integrity, functional group changes, crystallinity behaviour, surface area and pore size distribution using different analytical techniques. Developed biopolymers were then tested against synthetic wastewater spiked with nine transition and redox sensitive elements (100 µg L-1 each). Among the eight biopolymers, KBP-I removed 87-93% of As and Cd, KBP-IV removed 80-85% of Cu and VV, KBP-V removed 60-90% of Co, Ni and Zn, whereas KBP-VI removed 95% of CrVI. The developed keratin biopolymers show prospects to effectively treat the metals contaminated wastewater.

Methanogenic biodegradation of iso-alkanes and cycloalkanes during long-term incubation with oil sands tailings.

Microbes indigenous to oil sands tailings ponds methanogenically biodegrade certain hydrocarbons, including n-alkanes and monoaromatics, whereas other hydrocarbons such as iso- and cycloalkanes are more recalcitrant. We tested the susceptibility of iso- and cycloalkanes to methanogenic biodegradation by incubating them with mature fine tailings (MFT) collected from two depths (6 and 31 m below surface) of a tailings pond, representing different lengths of exposure to hydrocarbons. A mixture of five iso-alkanes and three cycloalkanes was incubated with MFT for 1700 d. Iso-alkanes were completely biodegraded in the order 3-methylhexane > 4-methylheptane > 2-methyloctane > 2-methylheptane, whereas 3-ethylhexane and ethylcyclopentane were only partially depleted and methylcyclohexane and ethylcyclohexane were not degraded during incubation. Pyrosequencing of 16S rRNA genes showed enrichment of Peptococcaceae (Desulfotomaculum) and Smithella in amended cultures with acetoclastic (Methanosaeta) and hydrogenotrophic methanogens (Methanoregula and Methanoculleus). Bioaugmentation of MFT by inoculation with MFT-derived enrichment cultures reduced the lag phase before onset of iso-alkane and cycloalkane degradation. However, the same enrichment culture incubated without MFT exhibited slower biodegradation kinetics and less CH4 production, implying that the MFT solid phase (clay minerals) enhanced methanogenesis. These results help explain and predict continued emissions of CH4 from oil sands tailings repositories in situ.

Polycyclic aromatic compounds (PACs) in the Canadian environment: A review of sampling techniques, strategies and instrumentation.

A wide variety of sampling techniques and strategies are needed to analyze polycyclic aromatic compounds (PACs) and interpret their distributions in various environmental media (i.e., air, water, snow, soils, sediments, peat and biological material). In this review, we provide a summary of commonly employed sampling methods and strategies, as well as a discussion of routine and innovative approaches used to quantify and characterize PACs in frequently targeted environmental samples, with specific examples and applications in Canadian investigations. The pros and cons of different analytical techniques, including gas chromatography - flame ionization detection (GC-FID), GC low-resolution mass spectrometry (GC-LRMS), high performance liquid chromatography (HPLC) with ultraviolet, fluorescence or MS detection, GC high-resolution MS (GC-HRMS) and compound-specific stable (δ13C, δ2H) and radiocarbon (Δ14C) isotope analysis are considered. Using as an example research carried out in Canada's Athabasca oil sands region (AOSR), where alkylated polycyclic aromatic hydrocarbons and sulfur-containing dibenzothiophenes are frequently targeted, the need to move beyond the standard list of sixteen EPA priority PAHs and for adoption of an AOSR bitumen PAC reference standard are highlighted.