RESUMO
Herbicide contamination in aquatic systems has become a global concern due to their long- term persistence, accumulation and health risks to humans. Paraquat, a widely used and cost-effective nonselective herbicide, is frequently applied in agricultural fields for pest control. Consequently, the removal of paraquat from contaminated water is crucial. This research presents a sustainable and environmentally benign method for paraquat removal from aqueous system by integrating wetland plants (Eichhornia crassipes) with biochar derived from melamine-modified palm kernel shells. The prepared biochar was characterized by using various analytical techniques. The effectiveness of biochar in enhancing phytoremediation was evaluated through a series of experiments, showing significant paraquat removal efficiencies of 99.7, 98.3, and 82.8% at different paraquat concentrations 50, 100, and 150 mg L-1, respectively. Additionally, present study examined the impact of biochar on the growth of E. crassipes, highlighting its potential to reduce the toxic effects of paraquat even present at higher concentrations. The paraquat removal mechanism was elucidated, focusing on the synergistic role of biochar adsorption and phytoremediation capability of E. crassipes. This innovative approach is an effective, feasible, sustainable and eco-friendly technique that can contribute to the development of advanced and affordable water remediation processes for widespread application.
The novelty of this study lies in the implementation of combined approach by phytoremediation with biochar modified with melamine. This study highlighted synergistic integration of two concurrent systems. The biochar generated from waste palm kernel shells played a pivotal role in facilitating the plants' survival and resilience against the paraquat toxicity, rather than succumbing to its deleterious effects. This research delineates a robust methodology for the elimination of emerging pollutants, offering researchers a platform to make pioneering advancements in this scientific field for sustainable future.
RESUMO
Lower dye concentrations and the presence of several dyes along with other matrices in environmental samples restrict their determination. Herein, a highly sensitive and rapid ultra-performance tandem mass spectrometric method was developed for simultaneous determination of cationic dyes, namely methylene blue (MB), rhodamine B (RB) and crystal violet (CV), in environmental samples. To preconcentrate environmental samples, solid-phase extraction cartridges were developed by using hydrogen peroxide modified pistachio shell biomass (MPSB). The surface morphological and chemical functionalities of MPSB were well characterized. The developed method was validated considering different validation parameters. In terms of accuracy and precision, the %RSD for all three dyes at all four concentration points was found to be between 1.26 and 2.76, while the accuracy reported in terms of the recovery was found to be 98.02%-101.70%. The recovery was found to be in the range of 98.11% to 99.55%. The real sample analysis shows that MB, RB, and CV were found in the ranges of 0.39-5.56, 0.32-1.92 and 0.27-4.36 µg/mL, respectively.
Assuntos
Cromatografia Líquida/métodos , Rodaminas/química , Extração em Fase Sólida/métodos , Violeta Genciana , Azul de Metileno/químicaRESUMO
Herein, Cetyltrimethyl ammonium bromide (CTAB) intercalated and branched polyhydroxystyrene (BPS) functionalized montmorillonite (MMT) nano-composite (BPS-CTAB-MMT) was developed, characterized, and its potential as an adsorbent was tested in sequestering cationic dyes viz. rhodamine B (RB), crystal violet (CV), and methylene blue (MB) from aqueous environment. N2 adsorption/desorption isotherm showed mesoporous BPS-CTAB-MMT surface with a BET surface area of 273.8â¯m2/g. The appearance of sharp spikes at 2855 and 2925â¯cm-1 (associated with symmetric and asymmetric tensions of C - H bonds) in infra-red spectrum of BPS-CTAB-MMT indicates successful intercalation of MMT with CTAB and functionalization with BPS. The observed crystallite size of BPS-CTAB-MMT was 66â¯nm. Comparatively greater weight loss for BPS-CTAB-MMT (11%) than MMT (9%) was observed during thermogravimetric analysis. The adsorption of dyes on BPS-CTAB-MMT was pH dependent with maximum uptake was observed in the pH range: 5-6. For initial dyes concentration (Co) range: 50-150â¯mg/L, the observed equilibration time for CV was 300â¯min, whereas for RB and MB the equilibration time varied between 300 and 360â¯min. Modeling investigations revealed the applicability of Sips isotherm and pseudo-second-order (PSO) kinetic models to dyes adsorption data. Sips maximum adsorption capacity (qs) values for RB, CV, and MB at 55⯰C were 476.5, 438.7, and 432.7â¯mg/g, respectively. The adsorption of dyes on BPS-CTAB-MMT was thermodynamically favorable. Desorption studies showed 42.1% RB and 41.9% CV recovery with 0.1â¯M NaOH and CH3COCH3, respectively, while only traces of MB were recovered with tested eluents.
Assuntos
Silicatos de Alumínio , Bentonita , Compostos de Cetrimônio , Adsorção , Cetrimônio , Argila , Corantes , CinéticaRESUMO
Quantitative assessment of nitrite (NO2-) anion was performed using a newly developed high throughput ultra performance liquid chromatography-mass spectrometric (UPLC-MS) method. The nitrite determination with the proposed method using micellar mobile phase was unknown. Selected ion reaction mode using negative electrospray ionization was adopted for the identification and quantitative analysis of nitrite. The chromatographic separation was performed using BEH C-18 column and a micellar mobile phase consisted of sodium dodecyl sulphate and acetonitrile in ratio 30:70 was used. The elution of nitrite anion was accomplished in less than 1 min. Under the optimal analysis conditions, the linearity of the developed method was checked in the concentration range of 0.5-20 mg kg-1 NO2- with an excellent correlation coefficient of 0.996. The precisions of the method with relative standard deviation <2% was observed when standard at concentration of 1 mg kg-1 was used. The limit of detection and limit of quantitation of the developed mass spectrometric method was found to be 0.114 and 0.346 mg kg-1, respectively. The developed UPLC/MS method was applied to quantify this anion in processed meats and poultries from various super market of Saudi Arabia (Riyadh region). The recoveries of the nitrite in the various samples were found in the range of 100.03-103.5%.
RESUMO
Silver nanoparticles have been synthesized and were utilized for the enhanced luminometric estimation of moxifloxacin antibiotic. During the experimental procedure, it was clearly found that the addition of silver nanoparticles intensifies the weak chemiluminescence signal intensity of calcein-KMnO4 system by several folds. It was also obvious that the intensity enhancement was linearly proportional to the moxifloxacin concentration and this phenomenon was further utilized for the quantitative determination of target analyte. Effects of the different chemical variables during the experiment were studied to achieve best chemiluminescence signal. Under the optimized experimental parameters, the linear calibration graph was established over the moxifloxacin concentration range of 6.0 × 10(-8) M to 2.5 × 10(-6) M with coefficient of correlation (r (2)) value 0.9998. The lower detection limit was found to be 5.6 × 10(-9) M. The percentage relative standard deviation calculated from five replicate chemiluminescence measurements was found to be 2.63 %. The developed chemiluminescence technique was successfully applied to the determination of moxifloxacin in tablet formulation and spiked human urine sample.
Assuntos
Análise de Injeção de Fluxo/métodos , Fluoroquinolonas/análise , Medições Luminescentes/métodos , Nanopartículas Metálicas/química , Prata/química , Urinálise/métodos , Antibacterianos/análise , Antibacterianos/urina , Fluoresceínas/química , Fluoroquinolonas/urina , Glucosídeos/química , Humanos , Compostos de Manganês/química , Moxifloxacina , Óxidos/química , Reprodutibilidade dos Testes , Sensibilidade e Especificidade , Comprimidos , Tecnologia Farmacêutica/métodosRESUMO
The presence of impurities is a significant restriction to the use of natural iron minerals as catalysts in the advanced oxidation process (AOP), especially if applied for soil remediation. This study evaluated the catalytic activity of tropical soil, which has relatively low impurities and naturally contains iron, for the remediation of phenanthrene (PHE) contamination. The system showed good performance, and the best result was 81% PHE removal after 24 h under experimental conditions of pH 7, [PHE]0 = 300 mg/50 g soil, temperature 55 °C, air flow = 260 mL min-1, and [persulfate]0 = 20 mg kg-1, while the mineralization was 61%. Nevertheless, certain limitations were noted in the soil matrix following the remediation procedure, including the appearance of cracks in the soil aggregate, reduction in the crystal size of the soil particles, and decline in the iron and aluminium contents. The results confirmed that the radicals play a major role in the remediation process. SO4Ë- was more dominant than O2Ë-, while HOË played a minor role. Additionally, the by-products were detected by gas chromatography-mass spectroscopy (GC-MS), and the degradation pathway of PHE is proposed. Toxicity assessment tests were performed by using a computational method. In spite of the challenges, this research achieved notable progress in soil remediation, taking a significant step forward in implementing the AOP without catalysts to activate oxidants and remove PHE within the soil. Also, this approach supports sustainability by reducing the need for extra materials and providing an environmentally friendly way of soil remediation.
Assuntos
Recuperação e Remediação Ambiental , Ferro , Oxirredução , Fenantrenos , Poluentes do Solo , Solo , Fenantrenos/química , Fenantrenos/análise , Poluentes do Solo/análise , Poluentes do Solo/química , Ferro/química , Recuperação e Remediação Ambiental/métodos , Solo/química , Catálise , Sulfatos/químicaRESUMO
The catalysts derived from natural iron minerals in the advanced oxidation process offer several advantages. However, their utilization in soil remediation is restricted due to the presence of soil impurities, which can inhibit the catalytic activity of these minerals. The soils in tropical regions exhibit lower organic matter content, limited cation exchange capacity, and are non-saline, this enhances the efficiency of utilizing natural iron minerals from tropical soil as a catalyst. In this regard, the catalytic potential of naturally iron-bearing tropical soil was investigated to eliminate phenanthrene (PHE), pyrene (PYR), and benzo[α]pyrene (B[α]P) using an oxygenated reactor supported with persulfate (PS). The system showed an efficient performance, and the removal efficiencies under the optimum conditions were 81 %, 73 %, and 86 % for PHE, PYR, and B[α]P, respectively. This indicated that the catalytic activity of iron was working efficiently. However, there were changes in the soil characteristics after the remediation process such as a significant reduction in iron and aluminum contents. The scavenging experiments demonstrated that HO⢠had a minor role in the oxidation process, SO4â¢- and O2â¢- emerged as the primary reactive species responsible for the effective degradation of the PAHs. Moreover, the by-products were monitored after soil remediation to evaluate their toxicity and to propose degradation pathways. The Mutagenicity test showed that two by-products from each PHE and B[α]P had positive results, while only one by-product of PYR showed positive. The toxicity tests of oral rat LD50 and developmental toxicity tests revealed that certain PAHs by-products could be more toxic from the parent pollutant itself. This study represents a notable progression in soil remediation by providing a step forward in the application of the advanced oxidation process (AOP) without requiring additional catalysts to activate oxidants and degrade pollutant PAHs from the soil.
RESUMO
We have successfully synthesized a new Ni(II)-based coordination polymer (CP) [Ni2(cis-1,4-chdc)2(4,4'-bpy)3(H2O)2] (1); (cis-1,4- H2chdc=cis-1,4-cyclohexanedicarboxylic acid and 4,4'-bpy=4,4'-bipyridine) employing slow diffusion method in a single pot technique. The connectivity of Ni(II) ions and bridging cis-1,4-chdc ligand gives rise to a three-dimensional (3D) framework with 2-fold interpenetrated diamondoid topology. Interestingly, the synthesized CP acts as efficient catalyst for electrocatalytic water splitting. The water oxidation activity of compound 1 exhibits Tafel slope equivalent to 361.48â mV.dec-1 for hydrogen evolution reaction (HER) and 353.53â mV.dec-1 for oxygen evolution reaction (OER) in an alkaline medium while almost similar values of Tafel slope for HER and OER equivalent to 287.33â mV.dec-1 and 289.93â mV.dec-1 respectively in acidic medium. Thus, the compound 1 has excellent efficacy in catalyzing HER and OER in acidic as well as alkaline medium, which is ascribed to its distinctive 3D architecture.
RESUMO
Bacteriocins produced by Bacillus subtilis have gained recognition for their safe use in humans. In this study, we aimed to assess the inhibitory activity of an antimicrobial peptide synthesized by the wild-type strain of B. subtilis against the notorious pathogen Pseudomonas aeruginosa. Our investigation employed the broth microdilution method to evaluate the inhibitory potential of this peptide. Among the four different pathogen strains tested, P. aeruginosa exhibited the highest susceptibility, with an inhibition rate of 29.62%. In parallel, we explored the cultivation conditions of B. subtilis, recognizing the potential of this versatile bacterium for applications beyond antimicrobial production. The highest inhibitory activity was achieved at pH 8, with an inhibition rate of 20.18%, indicating the potential for optimizing pH conditions for enhanced antimicrobial peptide production. For the kinetics of peptide production, the study explored different incubation periods and agitation levels. Remarkably, the highest activity of B. subtilis was observed at 24 h of incubation, with an inhibition rate of 44.93%. Finally, the study focused on the isolation of the antimicrobial peptide from the cell-free supernatant of B. subtilis using ammonium sulfate precipitation at various concentrations. The highest recorded activity was an impressive 89.72% achieved at an 80% concentration.
RESUMO
Assessment of the performance of linear and nonlinear regression-based methods for estimating in situ catalytic CO2 transformations employing TiO2/Cu coupled with hydrogen exfoliation graphene (HEG) has been investigated. The yield of methanol was thoroughly optimized and predicted using response surface methodology (RSM) and artificial neural network (ANN) model after rigorous experimentation and comparison. Amongst the different types of HEG loading from 10 to 40 wt%, the 30 wt% in the HEG-TiO2/Cu assisted photosynthetic catalyst was found to be successful in providing the highest conversion efficiency of methanol from CO2. The most influencing parameters, HEG dosing and inflow rate of CO2, were found to affect the conversion rate in the acidic reaction regime (at pH of 3). According to RSM and ANN, the optimum methanol yields were 36.3 mg g-1 of catalyst and 37.3 mg g-1 of catalyst, respectively. Through the comparison of performances using the least squared error analysis, the nonlinear regression-based ANN showed a better determination coefficient (overall R2 > 0.985) than the linear regression-based RSM model (overall R2 â¼ 0.97). Even though both models performed well, ANN, consisting of 9 neurons in the input and 1 hidden layer, could predict optimum results closer to RSM in terms of agreement with the experimental outcome.
RESUMO
The present study deals with two-phase non-Newtonian pseudoplastic crude oil and water flow inside horizontal pipes simulated by ANSYS. The study helps predict velocity and velocity profiles, as well as pressure drop during two-phase crude-oil-water flow, without complex calculations. Computational fluid dynamics (CFD) analysis will be very important in reducing the experimental cost and the effort of data acquisition. Three independent horizontal stainless steel pipes (SS-304) with inner diameters of 1 in., 1.5 in., and 2 in. were used to circulate crude oil with 5, 10, and 15% v/v water for simulation purposes. The entire length of the pipes, along with their surfaces, were insulated to reduce heat loss. A grid size of 221,365 was selected as the optimal grid. Two-phase flow phenomena, pressure drop calculations, shear stress on the walls, along with the rate of shear strain, and phase analysis were studied. Moreover, velocity changes from the wall to the center, causing a velocity gradient and shear strain rate, but at the center, no velocity variation (velocity gradient) was observed between the layers of the fluid. The precision of the simulation was investigated using three error parameters, such as mean square error, Nash-Sutcliffe efficiency, and RMSE-standard deviation of observation ratio. From the simulation, it was found that CFD analysis holds good agreement with experimental results. The uncertainty analysis demonstrated that our CFD model is helpful in predicting the rheological parameters very accurately. The study aids in identifying and predicting fluid flow phenomena inside horizontal straight pipes in a very effective way.
RESUMO
Exceptional electrical conductivity and abundance of surface terminations like-F- and OH- leading to hydrophilicity make the family of 2D transition metal carbides/nitrides and carbonitrides (MXene) excellent candidates for energy storage and conversion applications. MXenes, however, undergo restacking of nanosheets via van der Waals interaction, hindering the active sites, leading to slow electronic and ionic kinetics, and ultimately affecting their electrochemical performance. Herein, we report binder-free cetyltrimethylammonium bromide-reduced graphene oxide (CTAB-rGO)-modified MXene hybrid films on nickel foam as a promising noble metal-free multifunctional electrode synthesized via layer-by-layer assembly and dip coating techniques, which effectively reduce restacking while improving the kinetics. The properties of the as-prepared electrocatalysts are investigated using various physiochemical characterizations and electrochemical measurements to accomplish the objective of "creating one kind of electrocatalyst for multiapplication" with a thorough understanding of the relationship between the material structure, morphology, and electrocatalytic performance. In energy conversion, the synergetic effect of MXene and the CTAB-rGO support helped increase the catalytic activity of the composite for electrochemical water splitting, demonstrating a current density of 10 mA/cm2 at an overpotential (η) of 360 V and a Tafel slope value of 56.6 mV/dec for hydrogen evolution reaction and a current density of 10 mA/cm2 at an overpotential (η) of 179 mV and a Tafel slope value of 47.03 mV/dec for oxygen evolution reaction in an alkaline medium. The electrode material also exhibited a higher oxidation current density (373.60 mA/cm2) compared to that of synthesized MXene toward methanol oxidation reaction in direct methanol fuel cell application. Additionally, the energy storage potential of CTAB-rGO modified MXene as electrode materials for supercapacitors with a high specific capacitance (544.50 F g-1 at 0.5 A g-1) and a good capacity retention of 87% after 5000 cycles was studied. These findings of this work showcase the potential of the electrocatalyst in both conversion and storage of electrochemical energy.
RESUMO
The ultrafiltration mixed matrix membrane (UF MMMs) process represents an applicable approach for the removal of diluted acetic acid at low concentrations, owing to the low pressures applied. The addition of efficient additives represents an approach to further improve membrane porosity and, subsequently, enhance acetic acid removal. This work demonstrates the incorporation of titanium dioxide (TiO2) and polyethylene glycol (PEG) as additives into polysulfone (PSf) polymer via the non-solvent-induced phase-inversion (NIPS) method to improve the performance of PSf MMMs performance. Eight PSf MMMs samples designated as M0 to M7, each with independent formulations, were prepared and investigated for their respective density, porosity, and degree of AA retention. Morphology analysis through scanning electron microscopy elucidated sample M7 (PSf/TiO2/PEG 6000) to have the highest density and porosity among all samples with concomitant highest AA retention at approximately 92.2%. The application of the concentration polarization method further supported this finding by the higher concentration of AA solute present on the surface of the membrane compared to that of AA feed for sample M7. Overall, this study successfully demonstrates the significance of TiO2 and PEG as high MW additives in improving PSf MMM performance.
RESUMO
Mango has a high global demand. Fruit fungal disease causes post-harvest mango and fruit losses. Conventional chemical fungicides and plastic prevent fungal diseases but they are hazardous to humans and the environment. Direct application of essential oil for post-harvest fruit control is not a cost-effective approach. The current work offers an eco-friendly alternative to controlling the post-harvest disease of fruit using a film amalgamated with oil derived from Melaleuca alternifolia. Further, this research also aimed to assess the mechanical, antioxidant, and antifungal properties of the film infused with essential oil. ASTM D882 was performed to determine the tensile strength of the film. The antioxidant reaction of the film was assessed using the DPPH assay. In vitro and in vivo tests were used to evaluate the inhibitory development of the film against pathogenic fungi, by comparing the film with different levels of essential oil together with the treatment of the control and chemical fungicide. Disk diffusion was used to evaluate mycelial growth inhibition, where the film incorporated with 1.2 wt% essential oil yielded the best results. For in vivo testing of wounded mango, the disease incidence was successfully reduced. For in vivo testing of unwounded mango to which the film incorporated with essential oil was applied, although some quality parameters such as the color index were not significantly affected, weight loss was reduced, soluble solid content was increased, and firmness was increased, compared to the control. Thus, the film incorporated with essential oil (EO) from M. alternifolia can be an environmentally friendly alternative to the conventional approach and the direct application of essential oil to control post-harvest disease in mango.
RESUMO
This review critically discussed recent developments in hydrothermal carbonization (HTC) of food waste and its valorization to solid fuel. Food waste properties and fundamentals of the HTC reactor were also covered. The review further discussed the effect of temperature, contact time, pressure, water-biomass ratio, and heating rate on the HTC of food waste on the physiochemical properties of hydrochar. Literature review of the properties of the hydrochar produced from food waste in different studies shows that it possesses elemental, proximate, and energy properties that are comparable to sub-bituminous coal and may be used directly as fuel or co-combusted with coal. This work conclusively identified the existing research gaps and provided recommendation for future investigations.
RESUMO
Prior to applying supported liquid membranes (SLM) with strip dispersion for separation of chromium (VI), copper and zinc, suitable chemical settings were determined through solvent extraction and stripping studies. More than 90% of copper and zinc could be simultaneously extracted with at least 3% (v/v) di-(2-ethylhexyl)phosphoric acid (D2EHPA) at a feed equilibrium pH in the range of 3.5-5.0. For stripping, theoretical model equations derived and experimental results revealed that suitable concentrations of lower acid strength reagents can strip metals that have weaker metal-extractant bond without significantly stripping metals that have a stronger metal-extractant bond. Therefore, in a setup comprising three compartments separated by two SLM, we propose to fill the three compartments in the following order: feed-strip dispersion containing low acid strength reagent-strong acid. An organic phase with 4% (v/v) D2EHPA was used. From stripping experiments, 0.2 mol/L pH 3 citrate buffer, which resulted in the highest copper recovery (88.8%) and solution purity (99.0%), was employed as the low acid strength reagent while the strong acid consisted of 1 mol/L sulfuric acid. In 26 h, 99.1% copper was recovered by citrate buffer with 99.8% purity and 95.1% zinc was recovered by sulfuric acid with 98.4% purity. Chromium (VI), copper and zinc could be separated effectively using this separation strategy.
RESUMO
This work presents a comparative study of the physicochemical properties of chars derived by three thermochemical pathways, namely: hydrothermal carbonization, HTC (at 180, 200 and 220 °C), pyrolysis, PY, (at 500, 600 and 700 °C) and microwave assisted pyrolysis, MW (at 300, 450 and 600 W). The mass yield of HTC samples showed a decrease (78.7 to 26.7%) as the HTC temperature increased from 180 to 220 °C. A similar decreasing trend in the mass yield was also observed after PY (28.45 to 26.67%) and MW (56.45 to 22.44%) of the food waste mixture from 500 to 700 °C and 300 to 600 W, respectively. The calorific value analysis shows that the best among the chars prepared by three different heating methods may be ranked according to the decreasing value of the heating value as: PY500, MW300, and HTC180. Similarly, a decreasing trend in H/C values was observed as: PY500 (0.887), MW300 (0.306), and HTC180 (0.013). The scanning electron microscope (SEM) analyses revealed that the structure of the three chars was distinct due to the different temperature gradients provided by the thermochemical processes. The results clearly show that the suitable temperature for the HTC and PY of food waste was 180 °C and 500 °C, respectively, while the suitable power for the MW of food waste was 300 W.
RESUMO
Polycyclic aromatic hydrocarbons (PAHs) are a class of naturally occurring chemicals resulting from the insufficient combustion of fossil fuels. Among the PAHs, phenanthrene is one of the most studied compounds in the marine ecosystems. The damaging effects of phenanthrene on the environment are increasing day by day globally. To lessen its effect on the environment, it is essential to remove phenanthrene from the water resources in particular and the environment in general through advanced treatment methods such as photocatalytic degradation with high-performance characteristics and low cost. Therefore, the combination of metals or amalgamation of bimetallic oxides as an efficient photocatalyst demonstrated its propitiousness for the degradation of phenanthrene from aqueous solutions. Here, we reviewed the different nanocomposite materials as a photocatalyst, the mechanism and reactions to the treatment of phenanthrene, as well as the influence of other variables on the rate of phenanthrene degradation.
RESUMO
Agglomeration and restacking can reduce graphene oxide (GO) activity in a wide range of applications. Herein, GO was synthesized by a modified Hummer's method. To minimize restacking and agglomeration, in situ chemical oxidation polymerization was carried out to embed polyaniline (PANI) chains at the edges of GO sheets, to obtain GO-PANI nanocomposite. The GO-PANI was tested for the adsorptive removal of brilliant green (BG) from an aqueous solution through batch mode studies. Infrared (FT-IR) analysis revealed the dominance of hydroxyl and carboxylic functionalities over the GO-PANI surface. Solution pH-dependent BG uptake was observed, with maximum adsorption at pH 7, and attaining equilibrium in 30 min. The adsorption of BG onto GO-PANI was fit to the Langmuir isotherm, and pseudo-second-order kinetic models, with a maximum monolayer adsorption capacity (qm) of 142.8 mg/g. An endothermic adsorption process was observed. Mechanistically, π-π stacking interaction and electrostatic interaction played a critical role during BG adsorption on GO-PANI.
RESUMO
Herein, commercially available Dowex 5WX8, a cation exchange polymeric resin, was modified through solvent impregnation with t-butyl phosphate (TBP) to produce a solvent impregnated resin (SIR), which was tested for the removal of rhodamine B (RhB) from water in batch adsorption experiments. The effect of SIR dosage, contact time, and pH on RhB adsorption was studied and optimized by response surface methodology (RSM), interaction, Pareto, and surface plots. Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) were respectively used for characterizing SIR surface morphology and identifying active binding sites before and after RhB adsorption. SEM showed that the pristine SIR surface was covered with irregular size and shape spots with some pores, while RhB saturated SIR surface was non-porous. FTIR revealed the involvement of electrostatic and π-π interactions during RhB adsorption on SIR. Dosage of SIR, contact time, and their interaction significantly affected RhB adsorption on SIR, while pH and its interaction with dosage and contact time did not. The optimum identified experimental conditions were 0.16 g of SIR dose and 27.66 min of contact time, which allowed for 98.45% color removal. Moreover, RhB adsorption equilibrium results fitted the Langmuir isotherm with a maximum monolayer capacity (qmax) of 43.47 mg/g.