The Localization Behavior of Different CNTs in PC/SAN Blends Containing a Reactive Component.

Co-continuous blend systems of polycarbonate (PC), poly(styrene-co-acrylonitrile) (SAN), commercial non-functionalized multi-walled carbon nanotubes (MWCNTs) or various types of commercial and laboratory functionalized single-walled carbon nanotubes (SWCNTs), and a reactive component (RC, N-phenylmaleimide styrene maleic anhydride copolymer) were melt compounded in one step in a microcompounder. The blend system is immiscible, while the RC is miscible with SAN and contains maleic anhydride groups that have the potential to reactively couple with functional groups on the surface of the nanotubes. The influence of the RC on the localization of MWCNTs and SWCNTs (0.5 wt.%) was investigated by transmission electron microscopy (TEM) and energy-filtered TEM. In PC/SAN blends without RC, MWCNTs are localized in the PC component. In contrast, in PC/SAN-RC, the MWCNTs localize in the SAN-RC component, depending on the RC concentration. By adjusting the MWCNT/RC ratio, the localization of the MWCNTs can be tuned. The SWCNTs behave differently compared to the MWCNTs in PC/SAN-RC blends and their localization occurs either only in the PC or in both blend components, depending on the type of the SWCNTs. CNT defect concentration and surface functionalities seem to be responsible for the localization differences.

Poly(3-hexylthiophene)s Functionalized with N-Heterocyclic Carbenes as Robust and Conductive Ligands for the Stabilization of Gold Nanoparticles.

Recently, N-heterocyclic carbenes (NHCs) are explored as anchor groups to bind organic ligands to colloidal gold (i.e. gold nanoparticles, Au NPs), yet these efforts are confined to non-conjugated ligands so far-that is, focused solely on exploiting the stability aspect. Using NHCs to link Au NPs and electronically active organic components, for example, conjugated polymers (CPs), will allow capitalizing on both the stability as well as the inherent conductivity of the NHC anchors. Here, we report three types of Br-NHC-Au-X (X=Cl, Br) complexes, which, when used as starting points for Kumada polymerizations, yield regioregular poly(3-hexylthiophenes)-NHC-Au (P3HTs-NHC-Au) with narrow molecular weight distributions. The corresponding NPs are obtained via direct reduction and show excellent thermal as well as redox stability. The NHC anchors enable electron delocalization over the gold/CP interface, resulting in an improved electrochromic response behavior in comparison with P3HT-NHC-Au.

Multiresponsive Transitions of PDMAEMA Brushes for Tunable Surface Patterning.

Poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) is an attractive polymer for switchable surface coatings based on its multiresponsiveness toward environmental triggers (temperature, pH-value, ionic strength). In this in situ study, we present the complex and tunable thermoresponsiveness of PDMAEMA Guiselin brushes (9 nm, dry thickness), which were prepared via an efficient grafting-to approach. Combining in situ atomic force microscopy (AFM) visualizing the surface topography (x-y plane) and spectroscopic ellipsometry monitoring the swelling behavior of the polymer film (layer thickness, z-direction) offers for the first time a three-dimensional insight into thermoresponsive transitions on the nanoscale. While PDMAEMA films exhibit LCST behavior in the presence of monovalent counterions, it can easily be switched toward an UCST thermoresponsiveness via the addition of small quantities of multivalent ions. In both cases, the transition temperature as well as the sharpness and reversibility of the transition can be tuned via a second external trigger, the ionic strength. Whereas homogeneous surfaces were observed both below and above the LCST in monovalent salt solutions, the UCST transition was characterized by the in situ formation of a nanostructured surface of pinned PDMAEMA micelles with entrapped multivalent counterions. Moreover, it was demonstrated for the first time that the characteristic dimensions of the nanopattern (the diameter and height of the pinned micelles) could be tuned in situ by the pH- and induced UCST thermoresponsiveness of PDMAEMA. This approach therefore provides a novel bottom-up strategy to create and control polymeric nanostructures in an aqueous environment.

Dielectric Haloscopes: A New Way to Detect Axion Dark Matter.

We propose a new strategy to search for dark matter axions in the mass range of 40-400 µeV by introducing dielectric haloscopes, which consist of dielectric disks placed in a magnetic field. The changing dielectric media cause discontinuities in the axion-induced electric field, leading to the generation of propagating electromagnetic waves to satisfy the continuity requirements at the interfaces. Large-area disks with adjustable distances boost the microwave signal (10-100 GHz) to an observable level and allow one to scan over a broad axion mass range. A sensitivity to QCD axion models is conceivable with 80 disks of 1 m^{2} area contained in a 10 T field.

Simple and Sensitive Colorimetric Detection of Dopamine Based on Assembly of Cyclodextrin-Modified Au Nanoparticles.

A controlled assembly of natural beta-cyclodextrin modified Au NPs mediated by dopamine is demonstrated. Furthermore, a simple and sensitive colorimetric detection for dopamine is established by the concentration-dependent assembly.

Kinetically controlled synthesis of PdNi bimetallic porous nanostructures with enhanced electrocatalytic activity.

A class of 3D PdNi bimetallic nano-materials with porous nanostructures is synthesized using a facile and versatile approach at room temperature. Due to their porous nanostructures, their clean surfaces, as well as the synergistic effect between their compositions, the as-prepared PdNi exhibit greatly enhanced activity and stability towards methanol electrooxidation in an alkaline medium, holding great promise in fuel cells.

Manganese-Cycling Microbial Communities Inside Deep-Sea Manganese Nodules.

Polymetallic nodules (manganese nodules) have been formed on deep sea sediments over millions of years and are currently explored for their economic potential, particularly for cobalt, nickel, copper, and manganese. Here we explored microbial communities inside nodules from the northeastern equatorial Pacific. The nodules have a large connected pore space with a huge inner surface of 120 m(2)/g as analyzed by computer tomography and BET measurements. X-ray photoelectron spectroscopy (XPS) and electron microprobe analysis revealed a complex chemical fine structure. This consisted of layers with highly variable Mn/Fe ratios (<1 to >500) and mainly of turbostratic phyllomanganates such as 7 and 10 Švernadites alternating with layers of Fe-bearing vernadite (δ-MnO2) epitaxially intergrown with amorphous feroxyhyte (δ-FeOOH). Using molecular 16S rRNA gene techniques (clone libraries, pyrosequencing, and real-time PCR), we show that polymetallic nodules provide a suitable habitat for prokaryotes with an abundant and diverse prokaryotic community dominated by nodule-specific Mn(IV)-reducing and Mn(II)-oxidizing bacteria. These bacteria were not detected in the nodule-surrounding sediment. The high abundance and dominance of Mn-cycling bacteria in the manganese nodules argue for a biologically driven closed manganese cycle inside the nodules relevant for their formation and potential degradation.

Controlling the growth of palladium aerogels with high-performance toward bioelectrocatalytic oxidation of glucose.

We report the controllable synthesis of Pd aerogels with high surface area and porosity by destabilizing colloidal solutions of Pd nanoparticles with variable concentrations of calcium ions. Enzyme electrodes based on Pd aerogels co-immobilized with glucose oxidase show high activity toward glucose oxidation and are promising materials for applications in bioelectronics.

Effects of squamous cell carcinoma and smoking status on oropharyngeal and laryngeal microbial communities.

BACKGROUND: Still, little is known about microbial dysbiosis in oropharyngeal and laryngeal tissue as risk factor for development of local squamous cell carcinoma. The site-specific microbiota at these regions in healthy and cancer tissue and their modulation by environmental factors need to be defined. METHODS: The local microbiota of cancer tissue and healthy controls was profiled by 16S rRNA gene amplicon sequencing and statistical analysis using 111 oropharyngeal and 72 laryngeal intraoperative swabs. RESULTS: Oropharynx and larynx harbor distinct microbial communities. Clear effects of both smoking and cancer were seen in the oropharynx whereas effects in the larynx were minor. CONCLUSION: The distinct microbial communities at larynx and oropharynx partially explain why the effects of cancer and smoking were distinct at those sites. Thus, the use of microbiota supposed to mirror community changes in another target location should be avoided and more studies on the actual cancerous environment are necessary.

Non-intrusive planar velocity-based nearfield acoustic holography in moving fluid medium.

Nearfield Acoustic Holography (NAH) is a powerful acoustic imaging method, but its application in aeronautics can be limited by intrusive measurements of acoustic field. In this paper, a moving fluid medium NAH procedure using non-intrusive velocity measurements is proposed. This method is based on convective Kirchhoff-Helmholtz integral formula. Convective equations and convective Green's function are used to derive convective real-space propagators including airflow effects. Discrete Fourier transforms of these propagators allow the assessment of acoustic fields from acoustic pressure or normal acoustic velocity measurements. As the aim is to derive an in-flow velocity-based NAH method, this study is especially focused on real convective velocity-to-pressure propagator. In order to validate this procedure, simulations in the case of monopole sources radiating in various uniform subsonic flows have been performed. NAH provides very favorable results when compared to the simulated fields. A comparison of results obtained by the real propagator and those obtained by the wave number-frequency-domain one developed by Kwon et al. [J. Acoust. Soc. Am. 128(4), 1823-1832 (2010)] shows the interest of using the real-form in the case of pressure backward propagation from velocity measurements. The efficiency of the developed procedure is confirmed by a wind tunnel campaign with a flush-mounted loudspeaker and non-intrusive Laser Doppler Velocimetry velocity measurements.

N-Type Coating of Single-Walled Carbon Nanotubes by Polydopamine-Mediated Nickel Metallization.

Single-walled carbon nanotubes (SWCNTs) have unique thermal and electrical properties. Coating them with a thin metal layer can provide promising materials for many applications. This study presents a bio-inspired, environmentally friendly technique for CNT metallization using polydopamine (PDA) as an adhesion promoter, followed by electroless plating with nickel. To improve the dispersion in the aqueous reaction baths, part of the SWCNTs was oxidized prior to PDA coating. The SWCNTs were studied before and after PDA deposition and metallization by scanning and transmission electron microscopy, scanning force microscopy, and X-ray photoelectron spectroscopy. These methods verified the successful coating and revealed that the distribution of PDA and nickel was significantly improved by the prior oxidation step. Thermoelectric characterization showed that the PDA layer acted as a p-dopant, increasing the Seebeck coefficient S of the SWCNTs. The subsequent metallization decreased S, but no negative S-values were reached. Both coatings affected the volume conductivity and the power factor, too. Thus, electroless metallization of oxidized and PDA-coated SWCNTs is a suitable method to create a homogeneous metal layer and to adjust their conduction type, but more work is necessary to optimize the thermoelectric properties.

Adsorption of poly(vinylformamide-co-vinylamine) polymers (PVFA-co-PVAm) on copper.

The adsorption of poly(vinylformamide) (PVFA) and its derivative statistical copolymer poly(vinyl-formamide-co-vinylamine) (PVFA-co-PVAm) on metallic copper and copper oxide particles as well as planar copper surfaces was studied as a function of the degree of hydrolysis of PVFA, the pH, and the polymer concentration in solution. The chemical composition and molecular structure of the PVFA-co-PVAm layers were investigated by surface-sensitive spectroscopic methods such as XPS, DRIFT spectroscopy, and ellipsometry. The findings allowed us to explain the adsorption mechanisms and the forces driving the PVFA-co-PVAm adsorption. It was shown that PVFA-co-PVAm layers thicker than 30 nm are able to protect the planar copper surface against corrosive attack.

Fabricating pH-stable and swellable very thin hyperbranched poly(ethylene imine)-oligosaccharide films fabricated without precoating: first view on protein adsorption.

For using successful (ultra)thin dendritic macromolecule films in (bio)sensing and microfluidic devices and for obtaining reproducible film properties, alteration effects arising from precoatings have to be avoided. Here, oligosaccharide-modified hyperbranched poly(ethylene imine)s (PEI-OS) were used to fabricate very thin PEI-OS films (15-20 nm in dry state), cross-linked with citric acid under condensation, and vacuum condition. However, no reactive precoating is necessary to obtain stable films, which allows very simple film preparation and avoids alteration of the PEIS-OS film properties arising from precoating. Several methods [(in situ) ellipsometry, AFM, XPS, (in situ) ATR-IR, streaming potential measurements] were applied to characterize homogeneity, surface morphology, and stability of these PEI-OS films between pH 2 and pH 10, but also the low protein adsorption behavior.

Dopamine-Supported Metallization of Polyolefins─A Contribution to Transfer to an Eco-friendly and Efficient Technological Process.

Metallization is a common method to produce functional or decorative coatings on plastic surfaces. State-of-the-art technologies require energy-intensive process steps and the use of organic solvents or hazardous substances to achieve sufficient adhesion between the polymer and the metal layer. The present study introduces a facile bio-inspired "green" approach to improve this technology: the use of dopamine, a small-molecule mimic of the main structural component of adhesive mussel proteins, as an adhesion promoter. To understand dopamine adhesion and identify conditions for successful metallization, polyethylene surfaces were dip-coated with dopamine and metallized with nickel by electroless metallization; essential parameters such as temperature, pH value, concentration of dopamine and buffer, and the deposition time were systematically varied. Effects of adding oxidants to the dopamine bath, cross-linking, thermal and UV post-treatment of the polydopamine film, and plasma pretreatment of the substrate were investigated. The properties of the polydopamine layer and the quality of the metal film were studied by physico-chemical, optical, and mechanical techniques. It was shown that simple dip-coating of the substrate with dopamine under optimal conditions is sufficient to support metal layers with a good optical quality. Technologically relevant metal layer quality and adhesion were obtained with annealed and UV-treated polydopamine films and enhanced by plasma pretreatment of the substrate. The study shows that dopamine provides a new interfacial design for plastic metallization that can reduce energy consumption, use of hazardous substances, and reject rate during manufacturing. The results are essential findings for further technological developments of a universal platform to promote adhesion between plastics and metal or potentially also other material classes, enabling economic material development and more eco-friendly applications.

All-Carbon Monolithic Composites from Carbon Foam and Hierarchical Porous Carbon for Energy Storage.

We designed high-volumetric-energy-density supercapacitors from monolithic composites composed of self-standing carbon foam (CF) as the conducting matrix and embedded hierarchically organized porous carbon (PICK) as the active material. Using multiprobe scanning tunneling microscopy at selected areas, we were able to disentangle morphology-dependent contributions of the heterogeneous composite to the overall conductivity. Adding PICK is found to enhance the conductivity of the monoliths by providing additional links for the CF network, enabling high and stable performance. The resulting all-carbon CF-PICK composites were used as self-standing electrodes for symmetric supercapacitors without the need for a binder, additional conducting additive, metals as a current collector, or casting/drying steps. Supercapacitors achieved a capacitance of 181 F g-1 based on the entire mass of the monolithic electrode as well as an outstanding rate capability. Our symmetrical supercapacitors also delivered a record volumetric energy density of 19.4 mW h cm-3 when using aqueous electrolytes. Excellent cycling stability with almost quantitative retention of capacitance was found after 10,000 cycles in 6.0 M KOH as the electrolyte. Furthermore, charge-discharge testing at different currents demonstrated the fast charge-discharge capability of this material system that meets the requirements for practical applications.

Charge-Compensated N-Doped π-Conjugated Polymers: Toward both Thermodynamic Stability of N-Doped States in Water and High Electron Conductivity.

The understanding and applications of electron-conducting π-conjugated polymers with naphtalene diimide (NDI) blocks show remarkable progress in recent years. Such polymers demonstrate a facilitated n-doping due to the strong electron deficiency of the main polymer chain and the presence of the positively charged side groups stabilizing a negative charge of the n-doped backbone. Here, the n-type conducting NDI polymer with enhanced stability of its n-doped states for prospective "in-water" applications is developed. A combined experimental-theoretical approach is used to identify critical features and parameters that control the doping and electron transport process. The facilitated polymer reduction ability and the thermodynamic stability in water are confirmed by electrochemical measurements and doping studies. This material also demonstrates a high conductivity of 10-2  S cm-1  under ambient conditions and 10-1  S cm-1  in vacuum. The modeling explains the stabilizing effects  for various dopants. The simulations show a significant doping-induced "collapse" of the positively charged side chains on the core bearing a partial negative charge. This explains a decrease in the lamellar spacing observed in experiments. This study fundamentally enables a novel pathway for achieving both thermodynamic stability of the n-doped states in water and the high electron conductivity of polymers.

Adsorption of poly(vinyl formamide-co-vinyl amine) (PVFA-co-PVAm) polymers on zinc, zinc oxide, iron, and iron oxide surfaces.

The adsorption of poly(vinyl formamide) (PVFA) and the statistic copolymers poly(vinyl formamide-co-vinyl amine) (PVFA-co-PVAm) onto zinc and iron metal particles as well as their oxides was investigated. The adsorbates were characterized by means of XPS, DRIFT spectroscopy, wet chemical analysis, and solvatochromic probes. Dicyano-bis-(1,10-phenanthroline)-iron(II) (1), 3-(4-amino-3-methylphenyl)-7-phenyl-benzo-[1,2-b:4,5-b']difuran-2,6-dione (2), and 4-tert-butyl-2-(dicyano-methylene)-5-[4-(diethylamino)-benzylidene]-Δ(3)-thiazoline (3) as solvatochromic probes were coadsorbed onto zinc oxide to measure various effects of surface polarity. The experimental findings showed that the adsorption mechanism of PVFA and PVFA-co-PVAm strongly depends on the degree of hydrolysis of PVFA and pH values and also on the kind of metal or metal oxide surfaces that were employed as adsorbents. The adsorption mechanism of PVFA/PVFA-co-PVAm onto zinc oxide and iron oxide surfaces is mainly affected by electrostatic interactions. Particularly in the region of pH 5, the adsorption of PVFA/PVFA-co-PVAm onto zinc and iron metal particles is additionally influenced by redox processes, dissolution, and complexation reactions.

Live image processing does not increase adenoma detection rate during colonoscopy: a randomized comparison between FICE and conventional imaging (Berlin Colonoscopy Project 5, BECOP-5).

OBJECTIVES: Fujinon intelligent chromoendoscopy (FICE) is a post-processing imaging technique for increasing contrast of mucosa and mucosal lesions that might lead to improvement in colonic adenoma detection during colonoscopy. Previous studies on similar contrast-enhancing techniques as well as on dye staining have yielded variable and conflicting results. This large randomized trial was undertaken to determine whether FICE technology enhances adenoma detection rate (ADR). METHODS: In a prospective study performed in a multicenter private practice and hospital setting, involving 8 examiners with substantial lifetime experience (>10,000 colonoscopies each), 1,318 patients (men 46.7%, women 53.3%; mean age 59.05 years) were randomly assigned to colonoscopy with either FICE or white light imaging on instrument withdrawal. Of the colonoscopies, 68% were screening and 32% were diagnostic examinations. The primary outcome measure was the ADR (i.e., number of adenomas/total number of patients). RESULTS: There was no difference between the two groups in terms of general ADR (0.28 in both groups), the total number of adenomas (184 vs. 183), or detection of subgroups of adenomas. The rate of identification of hyperplastic polyps was also the same in both groups (127 vs. 121; P=0.67). The results were the same for both the screening and the diagnostic colonoscopy subgroups. Withdrawal time was the same in both groups (8.4 vs. 8.3 min, P=0.55). CONCLUSIONS: This large randomized trial could not show any objective advantage of the FICE technique over conventional high-resolution endoscopy in terms of improved ADR.

Deregulation of HIF1-alpha and hypoxia-regulated pathways in hepatocellular carcinoma and corresponding non-malignant liver tissue--influence of a modulated host stroma on the prognosis of HCC.

PURPOSE: The aim of this study was to elucidate the role of HIF1A expression in hepatocellular carcinoma (HCC) and the corresponding non-malignant liver tissue and to correlate it with the clinical outcome of HCC patients after curative liver resection. METHODS: HIF1A expression was determined by quantitative RT-PCR in HCC and corresponding non-malignant liver tissue of 53 patients surgically treated for HCC. High-density gene expression analysis and pathway analysis was performed on a selected subset of patients with high and low HIF1A expression in the non-malignant liver tissue. RESULTS: HIF1A over-expression in the apparently non-malignant liver tissue was a predictor of tumor recurrence and survival. The estimated 1-year and 5-year disease-free survival was significantly better in patients with low HIF1A expression in the non-malignant liver tissue when compared to those patients with high HIF1 expression (88.9% vs. 67.9% and 61.0% vs. 22.6%, respectively, p = 0.008). Based on molecular pathway analysis utilizing high-density gene-expression profiling, HIF1A related molecular networks were identified that contained genes involved in cell migration, cell homing, and cell-cell interaction. CONCLUSION: Our study identified a potential novel mechanism contributing to prognosis of HCC. The deregulation of HIF1A and its related pathways in the apparently non-malignant liver tissue provides for a modulated environment that potentially enhances or allows for HCC recurrence after curative resection.