RESUMO
An understanding of the fundamentals of the reaction between CuO with trace amounts of H2S to form CuS products is critical for the optimal utilization of this process in sulfur removal applications. Unfortunately, CuS is a complex material, featuring various Cu2-xS compounds (with 0 ≤ x ≤ 1), distorted crystal phases, and varying electronic structures and coordination environments of Cu and S ions. In this work, we combine ex situ and in situ X-ray absorption spectroscopy (XAS) at S and Cu K edges, fixed bed sorption experiments, DFT simulations, and other characterization techniques to speciate the CuS products formed at different temperatures (298-383 K) and from CuO sorbents with different crystallite sizes (2.8-40 nm). The results of our analysis identify the formation of a distorted CuS layer at the surface of CuO crystals with disulfide groups with shorter Cu-S bonds and higher delocalization of the positive charge of the Cu center into (S1-)2. This distorted CuS layer dominates the XAS signal at lower temperatures (298-323 K) and at the initial stages of sulfidation at higher temperatures (353 and 383 K) where conversion is low (<40%). First-principles atomistic simulations confirm the thermodynamic favorability of the formation of surface (S1-)2 on both CuO (111) and (1Ì 11) surfaces, providing further support for our experimental observations. Furthermore, these simulations reveal that the presence of disulfide bonds stabilized surface hydroxyl groups, leading to lower Gibbs Free Energies of their surface migration.
RESUMO
We demonstrate facile fabrication of highly filled, lightweight organic-inorganic composites comprising polyurethanes covalently linked with naturally occurring clinoptilolite microparticles. These polyurethane/clinoptilolite (PUC) composites are shown to mitigate particle aggregation usually observed in composites with high particle loadings and possess enhanced thermal insulation and acoustic attenuation compared with conventionally employed materials (e.g., drywall and gypsum). In addition to these functional properties, the PUC composites also possess flexural strengths and strain capacities comparable to and higher than ordinary Portland cement (OPC), respectively, while being â¼1.5× lighter than OPC. The porosity, density, and mechanical and functional properties of these composites are tuned by systematically varying their composition (diisocyanate, polyurethane, and inorganic contents) and the nature of the organic (reactivity and source of polyol) components. The fabrication process involves mild curing conditions and uses commonly available reagents (naturally occurring aluminosilicate particles, polyols, and diisocyanate), thereby making the process scalable. Finally, the composite properties are shown to be independent of the polyol source (virgin or recycled), underlining the generality of this approach for the scalable utilization of recycled polyols.
RESUMO
The demand for specific fuels and chemical feed-stocks fluctuates, and as a result, logistical mismatches can occur in the supply of their precursor raw materials such as coal, biomass, crude oil, and methane. To overcome these challenges, industry requires a versatile and robust suite of conversion technologies, many of which are mediated by synthesis gas (CO + H(2)) or methanol/dimethyl ether (DME) intermediates. One such transformation, the conversion of methanol/DME to triptane (2,2,3-trimethylbutane) has spurred particular research interest. Practically, triptane is a high-octane, high-value fuel component, but this transformation also raises fundamental questions: how can such a complex molecule be generated from such a simple precursor with high selectivity? In this Account, we present studies of this reaction carried out in two modes: homogeneously with soluble metal halide catalysts and heterogeneously over solid microporous acid catalysts. Despite their very different compositions, reaction conditions, provenance, and historical scientific context, both processes lead to remarkably similar products and mechanistic interpretations. In both cases, hydrocarbon chains grow by successive methylation in a carbocation-based mechanism. The relative rates of competitive processes-chain growth by methylation, chain termination by hydrogen transfer, isomerization, and cracking-systematically depend upon the structure of the various hydrocarbons produced, strongly favoring the formation of the maximally branched C(7) alkane, triptane. The two catalysts also show parallels in their dependence on acid strength. Stronger acids exhibit higher methanol/DME conversion but also tend to favor chain termination, isomerization, and cracking relative to chain growth, decreasing the preference for triptane. Hence, in both modes, there will be an optimal range: if the acid strength is too low, activity will be poor, but if it is too high, selectivity will be poor. A related reaction, the methylative homologation of alkanes, offers the possibility of upgrading low-value refinery byproducts such as isobutane and isopentane to more valuable gasoline components. With the addition of adamantane, a hydride transfer catalyst that promotes activation of alkanes, both systems effectively catalyze the reaction of methanol/DME with lighter alkanes to produce heavier ones. This transformation has the further advantage of providing stoichiometric balance, whereas the stoichiometry for conversion of methanol/DME to alkanes is deficient in hydrogen and requires rejection of excess carbon in the form of carbon-rich arenes, which lowers the overall yield of desired products. Alternatively, other molecules can serve as sacrificial sources of hydrogen atoms: H(2) on heterogeneous catalysts modified by cations that activate it, and H(3)PO(2) or H(3)PO(3) on homogeneous catalysts. We have interpreted most of the features of these potentially useful reactions at a highly detailed level of mechanistic understanding, and we show that this interpretation applies equally to these two widely disparate types of catalysts. Such approaches can play a key role in developing and optimizing the catalysts that are needed to solve our energy problems.
RESUMO
The pozzolanic reaction of fly ashes with calcium-based additives can be effectively used to solidify and chemically stabilize (S&S process) highly concentrated brines inside a cementitious matrix. However, complex interactions between the fly ash, the additive, and the brine typically affect the phases formed at equilibrium, and the resulting solid capacity to successfully encapsulate the brine and its contaminants. Here, the performances of two types of fly ash (a Class C and Class F fly ash) are assessed when combined with different additives (two types of cement, or lime with and without NaAlO2), and two types of brine (NaCl or CaCl2) over a range of concentrations (0 ≤ [Cl-] ≤ 2 M). The best performing matrices - i.e., the matrices with the highest Cl-containing phases content - were identified using XRD and TGA. The experimental results were then combined with thermodynamic modeling to dissociate the contribution of the fly ash from that of the additives. All results were implemented in a machine learning model that showed good accuracy at predicting the fly ash degree of reaction, allowing for the robust prediction of extended systems performance when combined with thermodynamic modeling.
Assuntos
Cinza de Carvão , Eliminação de Resíduos , Eliminação de Resíduos/métodos , Cálcio , Cloreto de Sódio , Cloreto de CálcioRESUMO
We present the mass balances associated with carbon dioxide (CO2) removal (CDR) using seawater as both the source of reactants and as the reaction medium via electrolysis following the "Equatic" (formerly known as "SeaChange") process. This process, extensively detailed in La Plante E.C.; ACS Sustain. Chem. Eng.2021, 9, ( (3), ), 1073-1089, involves the application of an electric overpotential that splits water to form H+ and OH- ions, producing acidity and alkalinity, i.e., in addition to gaseous coproducts, at the anode and cathode, respectively. The alkalinity that results, i.e., via the "continuous electrolytic pH pump" results in the instantaneous precipitation of calcium carbonate (CaCO3), hydrated magnesium carbonates (e.g., nesquehonite: MgCO3·3H2O, hydromagnesite: Mg5(CO3)4(OH)2·4H2O, etc.), and/or magnesium hydroxide (Mg(OH)2) depending on the CO32- ion-activity in solution. This results in the trapping and, hence, durable and permanent (at least â¼10â¯000-100â¯000 years) immobilization of CO2 that was originally dissolved in water, and that is additionally drawn down from the atmosphere within: (a) mineral carbonates, and/or (b) as solvated bicarbonate (HCO3-) and carbonate (CO32-) ions (i.e., due to the absorption of atmospheric CO2 into seawater having enhanced alkalinity). Taken together, these actions result in the net removal of â¼4.6 kg of CO2 per m3 of seawater catholyte processed. Geochemical simulations quantify the extents of net CO2 removal including the dependencies on the process configuration. It is furthermore indicated that the efficiency of realkalinization of the acidic anolyte using alkaline solids depends on their acid neutralization capacity and dissolution reactivity. We also assess changes in seawater chemistry resulting from Mg(OH)2 dissolution with emphasis on the change in seawater alkalinity and saturation state. Overall, this analysis provides direct quantifications of the ability of the Equatic process to serve as a means for technological CDR to mitigate the worst effects of accelerating climate change.
RESUMO
This Concept examines the opportunities for the use of biomass feedstocks in the production of liquid fuels for the transportation sector of society. The cost-competitive conversion of biomass into liquid fuels involves the integration of processes that operate on lignocellulosic feeds with processes that convert specific fractions of lignocellulose. A brief description of current energy systems is given to indicate the potential contributions of biomass to replace fossil fuel feedstocks for energy production, followed by a description of current biomass-conversion technologies. Specific focus is given to promising reaction pathways and novel research opportunities for conversion of the carbohydrate fraction of lignocellulose into fuels with targeted structures.
Assuntos
Biomassa , Carbono/química , Fontes Geradoras de Energia , Hidrocarbonetos/química , Oxigênio/química , CatáliseRESUMO
It is imperative to develop more efficient processes for conversion of biomass to liquid fuels, such that the cost of these fuels would be competitive with the cost of fuels derived from petroleum. We report a catalytic approach for the conversion of carbohydrates to specific classes of hydrocarbons for use as liquid transportation fuels, based on the integration of several flow reactors operated in a cascade mode, where the effluent from the one reactor is simply fed to the next reactor. This approach can be tuned for production of branched hydrocarbons and aromatic compounds in gasoline, or longer-chain, less highly branched hydrocarbons in diesel and jet fuels. The liquid organic effluent from the first flow reactor contains monofunctional compounds, such as alcohols, ketones, carboxylic acids, and heterocycles, that can also be used to provide reactive intermediates for fine chemicals and polymers markets.