DETENTION OUTLET RETROFIT IMPROVES THE FUNCTIONALITY OF EXISTING DETENTION BASINS BY REDUCING EROSIVE FLOWS IN RECEIVING CHANNELS.

By discharging excess stormwater at rates that more frequently exceed the critical flow for stream erosion, conventional detention basins often contribute to increased channel instability in urban and suburban systems that can be detrimental to aquatic habitat and water quality, as well as adjacent property and infrastructure. However, these ubiquitous assets, valued at approximately $600,000 per km2 in a representative suburban watershed, are ideal candidates to aid in reversing such cycles of channel degradation because improving their functionality would not necessarily require property acquisition or heavy construction. The objective of this research was to develop a simple, cost-effective device that could be installed in detention basin outlets to reduce the erosive power of the relatively frequent storm events (~ < two-year recurrence) and provide a passive bypass to maintain flood control performance during infrequent storms (such as the 100-year recurrence). Results from a pilot installation show that the Detain H2O device reduced the cumulative sediment transport capacity of the preretrofit condition by greater than 40%, and contributed to reduced flashiness and prolonged baseflows in receiving streams. When scaling the strategy across a watershed, these results suggest that potential gains in water quality and stream channel stability could be achieved at costs that are orders of magnitude less than comparable benefits from newly constructed stormwater control measures.

Progress and challenges to the global waste management system.

Rapid economic growth, urbanization and increasing population have caused (materially intensive) resource consumption to increase, and consequently the release of large amounts of waste to the environment. From a global perspective, current waste and resource management lacks a holistic approach covering the whole chain of product design, raw material extraction, production, consumption, recycling and waste management. In this article, progress and different sustainability challenges facing the global waste management system are presented and discussed. The study leads to the conclusion that the current, rather isolated efforts, in different systems for waste management, waste reduction and resource management are indeed not sufficient in a long term sustainability perspective. In the future, to manage resources and wastes sustainably, waste management requires a more systems-oriented approach that addresses the root causes for the problems. A specific issue to address is the development of improved feedback information (statistics) on how waste generation is linked to consumption.

Governance hurdles for expansion of low trophic mariculture production in Sweden.

The study examines the governance of low trophic species mariculture (LTM) using Sweden as a case study. LTM, involving species such as seaweeds and mollusks, offers ecosystem services and nutritious foods. Despite its potential to contribute to blue growth and Sustainable Development Goals, LTM development in the EU and OECD countries has stagnated. A framework for mapping governance elements (institutions, structures, and processes) and analyzing governance objective (effective, equitable, responsive, and robust) was combined with surveys addressed to the private entrepreneurs in the sector. Analysis reveals ineffective institutions due to lack of updated legislation and guidance, resulting in ambiguous interpretations. Governance structures include multiple decision-making bodies without a clear coordination agency. Licensing processes were lengthy and costly for the private entrepreneurs, and the outcomes were uncertain. To support Sweden's blue bioeconomy, LTM governance requires policy integration, clearer direction, coordinated decision-making, and mechanisms for conflict resolution and learning.

Cost-benefit analysis of beach-cast harvest: Closing land-marine nutrient loops in the Baltic Sea region.

Harvesting beach-cast can help mitigate marine eutrophication by closing land-marine nutrient loops and provide a blue biomass raw material for the bioeconomy. Cost-benefit analysis was applied to harvest activities during 2009-2018 on the island of Gotland in the Baltic Sea, highlighting benefits such as nutrient removal from the marine system and improved recreational opportunities as well as costs of using inputs necessary for harvest. The results indicate that the activities entailed a net gain to society, lending substance to continued funding for harvests on Gotland and assessments of upscaling of harvest activities to other areas in Sweden and elsewhere. The lessons learnt from the considerable harvest experience on Gotland should be utilized for developing concrete guidelines for carrying out sustainable harvest practice, paying due attention to local conditions but also to what can be generalized to a wider national and international context.

Evaluating a composite cartridge for small system drinking water treatment.

A pilot-scale evaluation was conducted at the U.S. Environmental Protection Agency (EPA) Test & Evaluation (T&E) Facility in Cincinnati, Ohio, on a multi-layer, cartridge-based system that combines physical filtration with carbon adsorption and ultraviolet (UV) light disinfection to serve as a home-base water treatment security device against accidental or intentional contaminant events. The system was challenged with different levels of turbidity, a number of biological contaminants including Bacillus subtilis, Escherichia coli, MS2 bacteriophage and Polystyrene Latex (PSL) beads as a surrogate for Cryptosporidium and a number of chemical contaminants including super-chlorination, methyl tertiary butyl ether (MTBE), water chlorination disinfection byproducts (DBPs) and diazinon. The results demonstrated that the performance of the system varies as a function of the specific contaminant or surrogate. The overall performance indicated the potential of the system to improve the quality and safety of household water and to serve as an additional treatment barrier in circumstances where there is little or no treatment or where the quality of treated water may have deteriorated during distribution. The results also demonstrated that B. subtilis spore can serve as a more conservative surrogate for Cryptosporidium than PSL beads.

The fate and transport of the SiO2 nanoparticles in a granular activated carbon bed and their impact on the removal of VOCs.

Adsorption isotherm, adsorption kinetics and column breakthrough experiments evaluating trichloroethylene (TCE) adsorption onto granular activated carbon (GAC) were conducted in the presence and absence of silica nanoparticles (SiO(2) NPs). Zeta potentials of the SiO(2) NPs and the GAC were measured. Particle size distribution (PSD) of SiO(2) NPs dispersions was analyzed with time to evaluate the extent of aggregation. TEM analysis was conducted. The specific surface area and the pore size distribution of the virgin and the spent GAC were obtained. The fate and transport of the SiO(2) NPs in the GAC fixed bed and their impact on TCE adsorption were found to be a function of their zeta potential, concentration and PSD. The interaction of the SiO(2) NPs and the GAC is of an electrokinetic nature. A weak electrostatic attraction was observed between the SiO(2) NPs and the GAC. This attraction favors SiO(2) NPs attachment on the surface of GAC. SiO(2) NPs attachment onto GAC is manifested by a reduction in the amount of TCE adsorbed during the column breakthrough experiments suggesting a preloading pore blockage phenomenon. However, no effect of SiO(2) NPs was observed on the isotherm and the kinetic studies, this is mainly due to the fast kinetics of TCE adsorption.

Copper content in lake sediments as a tracer of urban emissions: evaluation through a source-transport-storage model.

A coupled source-transport-storage model was developed to determine the origin and path of copper from materials/goods in use in the urban drainage area and the fate of copper in local recipient lakes. The model was applied and tested using five small lakes in Stockholm, Sweden. In the case of the polluted lakes Råcksta Träsk, Trekanten and Långsjön, the source strengths of copper identified by the model were found to be well linked with independently observed copper contents in the lake sediments through the model. The model results also showed that traffic emissions, especially from brake linings, dominated the total load in all five cases. Sequential sedimentation and burial proved to be the most important fate processes of copper in all lakes, except Råcksta Träsk, where outflow dominated. The model indicated that the sediment copper content can be used as a tracer of the urban diffuse copper source strength, but that the response to changes in source strength is fairly slow (decades). Major uncertainties in the source model were related to management of stormwater in the urban area, the rate of wear of brake linings and weathering of copper roofs. The uncertainty of the coupled model is in addition affected mainly by parameters quantifying the sedimentation and bury processes, such as particulate fraction, settling velocity of particles, and sedimentation rate. As a demonstration example, we used the model to predict the response of the sediment copper level to a decrease in the copper load from the urban catchment in one of the case study lakes.