Self-Assembly of Oligosaccharide-b-PMMA Block Copolymer Systems: Glyco-Nanoparticles and Their Degradation under UV Exposure.

This paper discusses the self-assembly of oligosaccharide-containing block copolymer and the use of ultraviolet (UV) to obtain nanoporous glyco-nanoparticles by photodegradation of the synthetic polymer block. Those glyco-nanoparticles consisting of oligosaccharide-based shell and a photodegradable core domain were obtained from the self-assembly of maltoheptaose-block-poly(methyl methacrylate) (MH-b-PMMA48) using the nanoprecipitation protocol. MH-b-PMMA48 self-assembled into well-defined spherical micelles (major compound) with a hydrodynamic radius (Rh) of ca. 10 nm and also into large compound micellar aggregates (minor compound) with an Rh of ca. 65 nm. The oligosaccharide shells of these glyco-nanoparticles were cross-linked through the Michael-type addition of divinyl sulfone under dilute conditions to minimize the intermicellar cross-linking. The core domain photodegradation of the cross-linked glyco-nanoparticles was induced under exposure to 254 nm UV radiation, resulting in porous glyco-nanoparticles with an Rh of ca. 44 nm. The morphology of the cross-linked shell and the core photodegradation of these glyco-nanoparticles were characterized using static light scattering, dynamic light scattering, Fourier transform infrared spectroscopy, proton nuclear magnetic resonance, field-emission gun-scanning electron microscopy, and transmission electron microscopy. The innovative aspect of this approach concerns the fact that after removing the PMMA domains the porous nanoparticles are mostly composed of biocompatible and nontoxic oligosaccharides.

Glyco-Nanoparticles Made from Self-Assembly of Maltoheptaose-block-Poly(methyl methacrylate): Micelle, Reverse Micelle, and Encapsulation.

The synthesis and the solution-state self-assembly of the "hybrid" diblock copolymers, maltoheptaose-block-poly(methyl methacrylate) (MH-b-PMMA), into large compound micelles (LCMs) and reverve micelle-type nanoparticles, are reported in this paper. The copolymers were self-assembled in water and acetone by direct dissolution method, and the morphologies of the nanoparticles were investigated by dynamic light scattering (DLS), nanoparticle tracking analysis (NTA), transmission electron microscopy (TEM), atomic force microscopy (AFM), proton nuclear magnetic resonance ((1)H NMR), and fluorescence spectroscopy as a function of the volume fraction of the copolymer hydrophobic block, copolymer concentration, stirring speed, and solvent polarity. The DLS measurements and TEM images showed that the hydrodynamic radius (Rh) of the LCMs obtained in water increases with the copolymer concentration. Apart from that, increasing the stirring speed leads to polydispersed aggregations of the LCMs. On the other hand, in acetone, the copolymers self-assembled into reverse micelle-type nanoparticles having Rh values of about 6 nm and micellar aggregates, as revealed the results obtained from DLS, AFM, and (1)H NMR analyses. The variation in micellar structure, that is, conformational inversion from LCMs to reverse micelle-type structures in response to polarity of the solvent, was investigated by apparent water contact angle (WCA) and (1)H NMR analyses. This conformational inversion of the nanoparticles was further confirmed by encapsulation and release of hydrophobic guest molecule, Nile red, characterized by fluorescence spectroscopy.

Crystallization of progesterone polymorphs using polymer-induced heteronucleation (PIHn) method.

Progesterone is a natural hormone steroid used in humans for several treatments and in livestock for artificial insemination, which exhibits two polymorphic forms at ambient conditions: form 1 and form 2. Form 2 is metastable and more soluble than form 1; however, it is not suitable to use as powder raw material because it transforms into form 1 by the effects of grinding. A polymorphic screening of progesterone based on polymer-induced heteronucleation method was performed as an alternative to prepare the metastable form. Polyvinyl alcohol, hydroxypropyl methylcellulose (HPMC), dextran, gelatin, polyisoprene (PI) and acrylonitrile-butadiene (NBR) copolymer were used. Crystals were prepared from 0.5, 10 and 40 mg/mL solutions in acetone at room temperature by solvent evaporation. The samples were characterized by X-ray powder diffraction, differential scanning calorimetry (DSC), scanning electron microcopy and attenuated total reflectance infrared Fourier transform spectroscopy. Form 1 was nucleated from 40 mg/mL solutions on the six polymers and from 10 mg/mL solutions on PI and NBR. The mixture of form 1 and form 2 was obtained from 10 mg/mL solution on HPMC, dextran and gelatin and from 0.5 mg/mL solution crystallizations. Therefore, the polymeric devices, which crystallized the metastable and more soluble polymorph (2) of progesterone, would be a promissory alternative for the pharmaceutical applications.

Peroxidase immobilized on phospholipid bilayers supported on Au (111) by DTT self-assembled monolayers: application to dopamine determination.

In this work, horseradish peroxidase (HRP) was immobilized on dimyristoylphosphatidylcholine (DMPC) bilayers supported on Au (111) by dithiotreitol (DTT) self-assembled monolayers and used as a nanostructured electrochemical biosensor to dopamine determination. The morphology of the phospholipid bilayers and the immobilization of HRP to these layers were characterized by atomic force microscopy (AFM). Square-wave voltammetry (SWV) experiments were done to investigate the performance of the HRP-modified electrode. The AFM images indicate that the enzyme is adsorbed at the external layer of the lipid bilayer and, although the electrical charges on the surface were not measured, the enzyme and phospholipids surface interaction occurs probably by electrostatic forces due to the pH used in the experiments. Interestingly, the present system can be used as one-shot sensor for the rapid detection of dopamine. The analytical performance of this system was linear for dopamine concentrations from 3.3 × 10⁻5 to 1.3 × 10⁻³ mol L⁻¹ (r = 0.9997) with a detection limit of 2.0 × 10⁻6 mol L⁻¹. Our results indicate that the use of HRP-DMPC bilayer system may be useful not only in developing new nanostructured materials for technological purposes, but could be very useful in fundamental studies to investigate the interactions between different micro-and macromolecules, even with soluble proteins, and lipid membranes.

Nifedipine-loaded polymeric nanocapsules: validation of a stability-indicating HPLC method to evaluate the drug entrapment efficiency and in vitro release profiles.

A simple stability-indicating analytical method was developed and validated to quantify nifedipine in polymeric nanocapsule suspensions; an in vitro drug release study was then carried out. The analysis was performed using an RP C18 column, UV-Vis detection at 262 nm, and methanol-water (70 + 30, v/v) mobile phase at a flow rate of 1.2 mL/min. The method was validated in terms of specificity, linearity and range, LOQ, accuracy, precision, and robustness. The results obtained were within the acceptable ranges. The nanocapsules, made of poly(epsilon-caprolactone), were prepared by the solvent displacement technique and showed high entrapment efficiency. The entrapment efficiency was 97.6 and 98.2% for the nifedipine-loaded polymeric nanocapsules prepared from polyvinyl alcohol (PVA) and Pluronic F68 (PF68), respectively. The particle size and zeta potential of nanocapsules were found to be influenced by the nature of the stabilizer used. The mean diameter and zeta potential for nanocapsules with PVA and PF68 were 290.9 and 179.9 nm, and -17.7 mV and -32.7 mV, respectively. The two formulations prepared showed a drug release of up to 70% over 4 days. This behavior indicates the viability of this drug delivery system for use as a controlled-release system.

Self-assembly of amphiphilic glycoconjugates into lectin-adhesive nanoparticles.

This work describes the synthesis and self-assembly of carbohydrate-clicked rod-coil amphiphilic systems. Copper-catalyzed Huisgen cycloaddition was efficiently employed to functionalize the hydrophilic extremity of PEG-b-tetra(p-phenylene) conjugates by lactose and N-acetyl-glucosamine ligands. The resulting amphiphilic systems spontaneously self-assembled into nanoparticles when dissolved in aqueous media, as evidenced by dynamic light scattering (DLS), transmission electron microscopy (TEM), and small-angle X-ray scattering (SAXS). The formation of highly monodisperse micelles having a mean diameter of 10 nm was observed for systems containing a PEG 900 core, and a decrease in the hydrophilic moiety (PEG 600) led to the formation of vesicles with a broader size distribution. The presence of carbohydrate residues on the surfaces of the micelles and their ability to establish specific interactions with wheat germ agglutinin (WGA) and peanut agglutinin (PNA) were further highlighted by light-scattering measurements, thus confirming the attractive applications of such sugar micelles in biosensor devices.

Application of solid-phase microextraction and gas chromatography-mass spectrometry for the determination of chlorophenols in leather.

This paper proposes a new analytical procedure based on the headspace solid-phase microextraction (HS-SPME) technique and gas chromatography-selected ion monitoring-mass spectrometry (GC-SIM-MS) for the determination of 16 phenols extracted from leather samples. The optimized conditions for the HS-SPME were obtained through two experimental designs - a two-level fractional factorial design followed by a central composite design - using the commercial SPME fiber polyacrylate 85 µm (PA). The best extraction conditions were as follows: 200 µL of derivatizing agent (acetic anhydride), 20 mL of saturated aqueous NaCl solution and extraction time and temperature of 50 min and 75°C, respectively. All optimized conditions were obtained with fixed leather sample mass (250 mg), vial volume (40 mL) and phosphate buffer pH (12) and concentration (50 mmol/L). Detection limits ranging from 0.03 to 0.20 ng/g, and relative standard deviation (RSD) lower than 10.23% (n=6) for a concentration of 800 ng/g (chlorophenols) and 1325 ng/g (2-phenylphenol) in the splitless mode were obtained. The recovery was studied at three concentration levels by adding different amounts of phenols to the leather sample and excellent recoveries ranging from 90.0 to 107.2% were obtained. The validated method was shown to be suitable for the quantification of phenols in leather samples, as it is simple, relatively fast and sensitive.

Characterization of membranes based on cellulose acetate butyrate/poly(caprolactone)triol/doxycycline and their potential for guided bone regeneration application.

This paper discusses the feasibility of using membranes based on cellulose acetate butyrate/poly(caprolactone)triol loaded with doxycycline for guided bone regeneration. Those membranes were obtained by solvent casting varying the cellulose acetate butyrate: poly(caprolactone)triol:doxycycline (CAB:PCL-T:DOX) mass ratios and characterized by scanning electron microscopy, differential scanning calorimetry, dynamical mechanical analysis, swelling and weight loss, drug release, in vitro antimicrobial activity and in vivo inflammatory response. Neat CAB and CAB:PCL-T:DOX membranes exhibited inner porous structure, which has a pore-size reduced with increasing of the PCL-T ratio. DSC results demonstrated that the molecular dispersion of the DOX into the CAB:PCL-T membrane was conditioned by PCL-T amount. Elastic modulus reduced noticeably with increased of the PCL-T ratio in the membrane from 2 to 3, while the strain at failure showed an increase of ca. 10-fold on the same condition. The DOX release mechanism from the membranes was found to be Fickian or quasi-Fickian diffusion. Membranes assessed immediately after the preparation, and even as the membranes immersed in synthetic saliva during 7 days, demonstrated significant inhibition in the growth of Staphylococcus aureus and Escherichia coli. Subcutaneous implant test on rat in vivo showed that the CAB:PCL-T:DOX membrane (7:3:1) did not trigger chronic inflammatory responses. These results suggest the feasibility in applying the CAB:PCL-T:DOX membrane as a barrier for guided bone regeneration.

Poly(ethylene-co-methyl acrylate) membranes as rate-controlling barriers for drug delivery systems: characterization, mechanical properties and permeability.

Poly(ethylene-co-methyl acrylate) (EMA) membranes with different amounts of methyl acrylate (MA) content were studied in terms of the thermal and mechanical properties, swelling and drug permeation. The increase in MA content in the copolymer significantly increased the percentage of elongation and decreased the tensile strength and modulus of elasticity of the membranes. The degree of swelling of the EMA membranes increased with the ethanol composition and MA content. The contact angle of a sessile drop (10 microL of ethanol/water solution) decreased with an increase in the ethanol fraction suggesting that the membrane wettibility increased with the ethanol content. The flux of diltiazem hydrochloride increased from 0.012 to 0.018 mg cm(-2)h(-1) with an increase in the MA content from 16.5 to 29.0%. By increasing the ethanol fraction from 0.4 to 1.0, the flux of diltiazem hydrochloride into the membranes with 29.0% MA, increased from 2.56 (+/-0.09) x 10(-3) to 18.38 (+/-0.62) x 10(-3) mg cm(-2)h(-1). The permeability coefficient increased from 5.85 x 10(-6) to 3.53 x 10(-4) cm h(-1) with an increase in the ethanol fraction. The flux can also be correlated with the drug solubility in the membrane and ethanol. For example, the solubilities of diltiazem hydrochloride, paracetamol and ibuprofen were 0.64, 6.68 and 504.48 mg cm(-3) in the membrane, respectively. Under the same conditions, the flux for the above mentioned drugs was 0.08 (+/-0.01), 0.53 (+/-0.01) and 45.11 (+/-2.00) mg cm(-2)h(-1).

Characterization and drug-permeation profiles of microporous and dense cellulose acetate membranes: influence of plasticizer and pore forming agent.

The use of pore forming agents and plasticizers are efficient ways to obtain membranes for controlled drug permeation through polymeric membranes. The challenge of the present study was to combine these two strategies to obtain cellulose acetate (CA) membranes, where poly(caprolactone triol) (PCL-T) was used as a plasticizer and water, dissolved in a casting solution, was used as a pore forming agent. First, the influence of water on membrane morphology, porosity and the permeation coefficient of a model drug (paracetamol) was analyzed. The influence of different amounts of PCL-T on the permeation coefficient of the CA membranes was then evaluated. Finally, both strategies were combined to obtain porous CA/PCL-T membranes. The membrane microstructure was analyzed using scanning electron microscopy (SEM), the CA crystallinity was determined via differential scanning calorimetry (DSC), and membrane permeability was investigated using paracetamol. The addition of water, a non-solvent, during the membrane casting process was found to be a simple and effective way to change membrane porosity and consequently the drug-permeation profile. When small quantities of non-solvent were used to obtain low porosity membranes, the presence of a plasticizer agent could be used to better modulate drug permeation. Combining the addition of PCL-T with the use of a non-solvent resulted in a series of CA membranes with paracetamol-permeation coefficient values in the range of ca. 10(-7) to 10(-5) cm s(-1).

The role of the carboxylate head group in the interaction of sodium dodecanoate with poly(ethylene oxide) investigated by electrical conductivity, viscosity, and aggregation number measurements.

The binding of sodium dodecanoate (SDoD) to poly(ethylene oxide) (PEO) in aqueous solution was investigated and compared with the well-known polymer-surfactant complexes formed between PEO and sodium dodecyl sulfate (SDS). Electrical conductivity measurements indicated that the concentration ratio of bound SDoD to PEO (on monomer basis) was greater than that for the system PEO-SDS. However, the aggregation numbers of the micelles supported on the polymer chain are practically constant and similar for both surfactants at concentrations lower than the polymer saturation point. The difference in binding capability is explained in terms of a larger PEO coil expansion upon complexation of SDoD than in the case of SDS. An increase in the polymer surface favors the binding of SDoD to PEO in aqueous solution. This conclusion is supported by the results of the viscometric studies of PEO-surfactant solution.

Transition from star-like to crew-cut micelles induced by UV radiation.

In the present article, the effect of UV on PS-b-PMMA micelles in solution is discussed. Micellar solutions of the amphiphilic poly(styrene-b-methylmethacrylate) block copolymer in selective solvent (methanol for the PMMA block) were exposed to UV radiation, which has simultaneously led to cross linking of the micellar core (PS) and degradation of the micellar corona (PMMA). The kinetics of such process were investigated in situ by means of dynamic light scattering, allowing the measurement of hydrodynamic radius as a function of UV exposure time. Results indicate that the size of micelles has decreased with UV exposure time down to a minimum value. Such reduced size resulted from PMMA degradation, which later promoted aggregation and coagulation because the micellar core was no longer well protected by PMMA. Addition of good solvent for both blocks (toluene) to non-UV exposed micelles has led to core swelling (PS) and, ultimately, system disassembly (free copolymer chain). The effect of adding toluene on the UV-exposed micelles has only caused core swelling as a consequence of the PS cross-linking.

Synthesis, micellization and lectin binding of new glycosurfactants.

Here we report the preparation and physico-chemical characterization of carbohydrate-decorated micelles and their interaction with lectins. A library of biosourced amphiphiles was prepared by copper-catalyzed azide-alkyne cycloaddition (CuAAC) between alkynyl sugars (lactose, N-acetyl-D-glucosamine) and azido-functionalized poly(ethylene glycol) esters (N3-PEG900-decanoate (C10) and -dodecanoate (C12)). In water, these glycoconjugates self-assemble into micelles of homogeneous nanometric size (11 nm) as evidenced by scattering techniques (DLS for light, and SAXS for X-ray). A comparative study with previously synthesized octadecanoate counterparts pointed out that that nature of the fatty acid has no significant influence on the particle size but only affects their compactness. These findings are in favor of a possible bulk preparation from lipid mixtures such as those encountered in renewable vegetable oils. The presence of the carbohydrate epitopes on the surface of the micelles and their bioavailability for lectin targeting were also evidenced by light scattering measurements using wheat germ agglutinin (WGA) and peanut (Arachis hypogaea) (PNA) lectins, supporting possible application as targeted drug nanocarriers.

Production and characterization of cornstarch/cellulose acetate/silver sulfadiazine extrudate matrices.

The production and evaluation of cornstarch/cellulose acetate/silver sulfadiazine extrudate matrices are reported herein. The matrices were melt extruded under nine different conditions, altering the temperature and the screw speed values. The surface morphology of the matrices was examined by scanning electron microscopy. The micrographs revealed the presence of non-melted silver sulfadiazine microparticles in the matrices extruded at lower temperature and screw speed values. The thermal properties were evaluated and the results for both the biopolymer and the drug indicated no thermal degradation during the melt extrusion process. The differential scanning analysis of the extrudate matrices showed a shift to lower temperatures for the silver sulfadiazine melting point compared with the non-extruded drug. The starch/cellulose acetate matrices containing silver sulfadiazine demonstrated significant inhibition of the growth of Pseudomonas aeruginosa and Staphylococcus aureus. In vivo inflammatory response tests showed that the extrudate matrices, with or without silver sulfadiazine, did not trigger chronic inflammatory processes.

Chitosan-decorated polystyrene-b-poly(acrylic acid) polymersomes as novel carriers for topical delivery of finasteride.

In view of the fact that the oral administration of finasteride (FIN) has resulted in various undesirable systemic side effects, the topical application of polystyrene and poly(acrylic acid)-based polymersomes (underexplored system) was investigated. Undecorated PS139-b-PAA17 and PS404-b-PAA63 vesicles (C3 and C7, respectively) or vesicles decorated with chitosan samples of different molecular weight (C3/CS-oligo, C7/CS-oligo, C3/CS-37 and C7/CS-37) were prepared by the co-solvent self-assembly method and characterized by small-angle X-ray scattering,transmission electron microscopy and dynamic light scattering techniques. In vitro release experiments and ex vivo permeation using Franz diffusion cells were carried out (through comparison with hydroethanolic finasteride solution). The ideal system should provide high finasteride retention in the dermis and epidermis while allowing some control of the drug release. The particle size and in vitro release were negatively correlated with the permeation coefficient and skin retention in both the epidermis and dermis. The findings that the longest lag time was obtained for the hydroethanolic drug solution and lowest permeation for the systems able to release the drug faster support the hypothesis that nanostructured systems may be required to enhance the penetration and permeation of the drug. Chitosan-decorated polymersomes interacted more strongly with the skin components than non-decorated samples, probably due to the positive surface charge, which increased the FIN retention and reduced the lag time. C7 polymersomes decorated with chitosan were more appropriate for topical applications (high retention in the dermis and epidermis and controlled drug delivery).

Xyloglucan-based diblock co-oligomer: synthesis, self-assembly and steric stabilization of proteins.

We propose a novel plant-based amphiphilic diblock co-oligomers (BCO) surfactant containing only carbohydrate segments and examine its potential as a biosourced stabilizer. The synthesis of an amphiphilic xyloglucan-based BCO, composed of a hydrophilic xyloglucan oligosaccharide (XGO) block "clicked" to a hydrophobic peracetylated XGO is described. Dynamic light scattering experiments correlated with transmission electron microscopy observations showed that this new class of amphiphilic BCO self-assembles in water to form spherical micelles with a hydrodynamic diameter of 22 nm. Preliminary studies indicate that the XGO-based BCO sterically stabilizes gliadin and zein nanoparticle suspensions. The stabilization results were compared to those using pluronic F-68, a commercial surfactant. For gliadin nanoparticles, both surfactants result in essentially the same morphology and polydispersity. However, for the zein nanoparticles, the XGO-based BCO stabilizer gave lower polydispersity.

Morphology study of progesterone polymorphs prepared by polymer-induced heteronucleation (PIHn).

In this article, morphology of progesterone polymorphs prepared by polymer-induced heteronucleation (PIHn) technique was studied. Hydroxypropyl methylcellulose(HPMC), such as dextran T-500 and gelatin G-9382, polyisoprene (PI), and acrylonitrile/butadiene copolymer (NBR) were used as substrates. The crystallizations were performed by solvent evaporation at room temperature from 0.5, 10, and 40 mg/ml solutions in chloroform and acetone. Progesterone polymorphs were identified by X-ray diffraction. Differential scanning calorimetry and total attenuated reflectance infrared spectroscopy were used as complementary techniques in the identification. Depending on the polymeric matrix and the concentration used, form 1, form 2, or mixture of both polymorphs were obtained. Scanning electron microscopy pictures evidenced difference in morphology and in homogeneity of the two progesterone polymorphs. These polymorphs prepared by PIHn, did not present a distinctive morphology that allows identifying polymorph by its crystal habit. Hence, polymeric matrix induced the crystallization, affecting polymorphism and morphology.

Dynamic rheological properties of native and cross-linked gliadin proteins.

A comparison of cross-linked and native gliadin suspensions, with respect to the state of protein globular structure was carried out using small-angle X-ray scattering (SAXS), dynamic light scattering (DLS) and rheological analysis. Gliadin suspensions were also analyzed in the presence and absence of glycerol. DLS analysis showed that R(h) increased only with gliadin/EDC/NHS suspensions. However, Kratky plots revealed that gliadin and gliadin/L-cysteine maintained their globular shape even in absence or presence of glycerol. Rheological experiments revealed that gliadin and gliadin/L-cysteine suspension exhibited a similar profile with three main domains, and a sol-gel transition. Gliadin/EDC/NHS did not present any sol-gel transition, and this fact corroborates with DLS results and the hypothesis of lower protein-protein interaction, which are in agreement with G″ > G'.

The fluorosolvatochromism of Brooker's merocyanine in pure and in mixed solvents.

The fluorescence-based solvatochromism (fluorosolvatochromism) of 4-[(1-methyl-4(1H)-pyridinylidene)-ethylidene]-2,5-cyclohexadien-1-one (Brooker's merocyanine) was studied. The results revealed that the fluorescence emission band of the dye was dependent on the medium (lambda(fl)(max)= 573 nm in water and lambda(fl)(max)=622 nm in DMF). The fluorescence quantum yields (phi (f)) were calculated for the dye in the solvents investigated. Low phi (f) values ( < 10%) were obtained for the dye and in order to better comprehend the radiative and nonradiative decay processes of this dye, its fluorescence lifetime in methanol was measured and was found to be very short (230 ps). The results suggest that the dye in the excited state decays rapidly through nonradiative processes. The behavior of the probe in binary mixtures including a hydrogen-bond accepting solvent (acetonitrile, N,N-dimethylformamide, and dimethylsulfoxide) and a hydroxylic solvent (water, methanol, ethanol, propan-2-ol, and butan-1-ol) was also investigated. All data were successfully fitted to a model based on solvent exchange equilibria, which allowed the separation of the different contributions of the solvent species in the solvation shell of the dye. The data obtained for the mixed solvents were explained based on solute-solvent and solvent-solvent interactions.

Mechanical properties and total hydroxycinnamic derivative release of starch/glycerol/Melissa officinalis extract films / Propriedades mecânicas e a liberação total hidroxicinâmicos derivados e extração de película de amido / glicerol / Melissa officinalis

The aim of this study was to investigate the mechanical properties of starch/glycerol/Melissa officinalis, a topical drug delivery system for labial herpes treatment. Four films were prepared with different concentrations of starch, glycerol, and Melissa officinalis extract. The results revealed that increasing the glycerol concentration in the film reduced elasticity modulus and tensile strength, exhibiting a plasticizing effect. The increase in free volume resulted in increased release of hydroxycinnamic derivatives expressed as rosmarinic acid.

O objetivo deste trabalho foi estudar as propriedades mecânicas e o mecanismo de liberação de um sistema tópico de liberação prolongada para o tratamento do Herpes labial a partir de filmes de amido/glicerol/extrato de Melissa officinalis, planta com comprovada atividade antiviral. Foram obtidos quatro filmes poliméricos com diferentes concentrações de amido, glicerol e extrato de Melissa officinalis os quais foram caracterizados mecanicamente e determinado o perfil de liberação de derivados hidroxicinâmicos. Os resultados demonstraram que o aumento da concentração de glicerol no filme produz uma redução no módulo de elasticidade e na tensão de deformação como conseqüência do efeito plastificante. O aumento no volume livre do polímero resultou em aumento da liberação dos derivados hidroxicinâmicos expressos como ácido rosmarínico.