Polycystic kidneys: interaction of notch and renin.

Polycystic kidney disease (PKD) is a developmental disorder, which either manifests in early childhood or later in life, depending on the genetic mutation one harbors. The mechanisms of cyst initiation are not well understood. Increasing literature is now suggesting that Notch signaling may play a critical role in PKD. Activation of Notch signaling is important during nephrogenesis and slows down after development. Deletion of various Notch molecules in the cap mesenchyme leads to formation of cysts and early death in mice. A new study by Belyea et al. has now found that cells of renin lineage may link Notch expression and cystic kidney disease. Here, we use our understanding of Notch signaling and PKD to speculate about the significance of these interactions.

Mg-Zn-Ca Alloy (ZX00) Screws Are Resorbed at a Mean of 2.5 Years After Medial Malleolar Fracture Fixation: Follow-up of a First-in-humans Application and Insights From a Sheep Model.

BACKGROUND: In the ongoing development of bioresorbable implants, there has been a particular focus on magnesium (Mg)-based alloys. Several Mg alloys have shown promising properties, including a lean, bioresorbable magnesium-zinc-calcium (Mg-Zn-Ca) alloy designated as ZX00. To our knowledge, this is the first clinically tested Mg-based alloy free from rare-earth elements or other elements. Its use in medial malleolar fractures has allowed for bone healing without requiring surgical removal. It is thus of interest to assess the resorption behavior of this novel bioresorbable implant. QUESTIONS/PURPOSES: (1) What is the behavior of implanted Mg-alloy (ZX00) screws in terms of resorption (implant volume, implant surface, and gas volume) and bone response (histologic evaluation) in a sheep model after 13 months and 25 months? (2) What are the radiographic changes and clinical outcomes, including patient-reported outcome measures, at a mean of 2.5 years after Mg-alloy (ZX00) screw fixation in patients with medial malleolar fractures? METHODS: A sheep model was used to assess 18 Mg-alloy (ZX00) different-length screws (29 mm, 24 mm, and 16 mm) implanted in the tibiae and compared with six titanium-alloy screws. Micro-CT was performed at 13 and 25 months to quantify the implant volume, implant surface, and gas volume at the implant sites, as well as histology at both timepoints. Between July 2018 and October 2019, we treated 20 patients with ZX00 screws for medial malleolar fractures in a first-in-humans study. We considered isolated, bimalleolar, or trimalleolar fractures potentially eligible. Thus, 20 patients were eligible for follow-up. However, 5% (one patient) of patients were excluded from the analysis because of an unplanned surgery for a pre-existing osteochondral lesion of the talus performed 17 months after ZX00 implantation. Additionally, another 5% (one patient) of patients were lost before reaching the minimum study follow-up period. Our required minimum follow-up period was 18 months to ensure sufficient time to observe the outcomes of interest. At this timepoint, 10% (two patients) of patients were either missing or lost to follow-up. The follow-up time was a mean of 2.5 ± 0.6 years and a median of 2.4 years (range 18 to 43 months). RESULTS: In this sheep model, after 13 months, the 29-mm screws (initial volume: 198 ± 1 mm3) degraded by 41% (116 ± 6 mm3, mean difference 82 [95% CI 71 to 92]; p < 0.001), and after 25 months by 65% (69 ± 7 mm3, mean difference 130 [95% CI 117 to 142]; p < 0.001). After 13 months, the 24-mm screws (initial volume: 174 ± 0.2 mm3) degraded by 51% (86 ± 21 mm3, mean difference 88 [95% CI 52 to 123]; p = 0.004), and after 25 months by 72% (49 ± 25 mm3, mean difference 125 [95% CI 83 to 167]; p = 0.003). After 13 months, the 16-mm screws (initial volume: 112 ± 5 mm3) degraded by 57% (49 ± 8 mm3, mean difference 63 [95% CI 50 to 76]; p < 0.001), and after 25 months by 61% (45 ± 10 mm3, mean difference 67 [95% CI 52 to 82]; p < 0.001). Histologic evaluation qualitatively showed ongoing resorption with new bone formation closely connected to the resorbing screw without an inflammatory reaction. In patients treated with Mg-alloy screws after a mean of 2.5 years, the implants were radiographically not visible in 17 of 18 patients and the bone had homogenous texture in 15 of 18 patients. No clinical or patient-reported complications were observed. CONCLUSION: In this sheep model, Mg-alloy (ZX00) screws showed a resorption to one-third of the original volume after 25 months, without eliciting adverse immunologic reactions, supporting biocompatibility during this period. Mg-alloy (ZX00) implants were not detectable on radiographs after a mean of 2.5 years, suggesting full resorption, but further studies are needed to assess environmental changes regarding bone quality at the implantation site after implant resorption. CLINICAL RELEVANCE: The study demonstrated successful healing of medial malleolar fractures using bioresorbable Mg-alloy screws without clinical complications or revision surgery, resulting in pain-free ankle function after 2.5 years. Future prospective studies with larger samples and extended follow-up periods are necessary to comprehensively assess the long-term effectiveness and safety of ZX00 screws, including an exploration of limitations when there is altered bone integrity, such as in those with osteoporosis. Additional use of advanced imaging techniques, such as high-resolution CT, can enhance evaluation accuracy.

New Insights into the Anatomy of the Midface Musculature and its Implications on the Nasolabial Fold.

BACKGROUND: The prominent nasolabial fold is a distinct feature of the aging midface. As minimally invasive procedures have become mainstream, chemodenervation is a preferred method for treating dynamic facial rhytids. We therefore sought to identify relevant nasolabial fold and midfacial muscular anatomy to determine the ideal location of neuromodulation to improve the aesthetics of the midface and nasolabial fold without altering the upper lip and smile. METHODS: Twelve hemifacial cadaveric dissections were performed to identify midface muscle origin, insertion, width, vector of pull, and neighboring structures. Attention was focused on the levator labii superioris alaeque nasi (LLSAN), levator labii superioris (LLS), nasalis, and orbicularis oculi. Measurements were obtained based on surface landmarks including the medial canthus for future neurotoxin injection. RESULTS: The LLSAN inserts into the medial nasolabial fold and alar base, while the LLS inserts into the middle third of the nasolabial fold. The broadest portion of the superior LLSAN was on average 8.4 mm inferior and 4.6 mm medial to the medial canthus. A separate muscle obliquely oriented between the orbicularis oculi and LLSAN was identified and found to insert into the malar fat pad. This "malar levator" was present in all specimens and has implications on medial periorbital rhytids and the tear trough deformity. CONCLUSION: This study further defines midfacial and nasolabial fold muscular anatomy and provides new insights into the use of neuromodulators for these areas without affecting upper lip position. The malar levator muscle appears to be a separate midfacial muscle with independent action. LEVEL OF EVIDENCE V: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

TRAP assists membrane protein topogenesis at the mammalian ER membrane.

Membrane protein insertion and topogenesis generally occur at the Sec61 translocon in the endoplasmic reticulum membrane. During this process, membrane spanning segments may adopt two distinct orientations with either their N- or C-terminus translocated into the ER lumen. While different topogenic determinants in membrane proteins, such as flanking charges, polypeptide folding, and hydrophobicity, have been identified, it is not well understood how the translocon and/or associated components decode them. Here we present evidence that the translocon-associated protein (TRAP) complex is involved in membrane protein topogenesis in vivo. Small interfering RNA (siRNA)-mediated silencing of the TRAP complex in HeLa cells enhanced the topology effect of mutating the flanking charges of a signal-anchor, but not of increasing signal hydrophobicity. The results suggest a role of the TRAP complex in moderating the 'positive-inside' rule.

An accelerated mouse model for atherosclerosis and adipose tissue inflammation.

BACKGROUND: Obesity and particularly the metabolic syndrome, which is often associated with obesity, combine a major risk for type 2 diabetes and cardiovascular disease. Emerging evidence indicate obesity-associated subclinical inflammation primarily originating from adipose tissue as a common cause for type 2 diabetes and cardiovascular disease. However, a suitable and well-characterized mouse model to simultaneously study obesity-associated metabolic disorders and atherosclerosis is not available yet. Here we established and characterized a murine model combining diet-induced obesity and associated adipose tissue inflammation and metabolic deteriorations as well as atherosclerosis, hence reflecting the human situation of cardio-metabolic disease. METHODS: We compared a common high-fat diet with 0.15% cholesterol (HFC), and a high-fat, high-sucrose diet with 0.15% cholesterol (HFSC) fed to LDL receptor-deficient (LDLR-/-) mice. Insulin resistance, glucose tolerance, atherosclerotic lesion formation, hepatic lipid accumulation, and inflammatory gene expression in adipose tissue and liver were assessed. RESULTS: After 12-16 weeks, LDLR-/- mice fed HFSC or HFC developed significant diet-induced obesity, adipose tissue inflammation, insulin resistance, and impaired glucose tolerance compared to lean controls. Notably, HFSC-fed mice developed significantly higher adipose tissue inflammation in parallel with significantly elevated atherosclerotic lesion area compared to those on HFC. Moreover, LDLR-/- mice on HFSC showed increased insulin resistance and impaired glucose tolerance relative to those on HFC. After prolonged feeding (20 weeks), however, no significant differences in inflammatory and metabolic parameters as well as atherosclerotic lesion formation were detectable any more between LDLR-/- mice fed HFSC or HFC. CONCLUSION: The use of high sucrose rather than more complex carbohydrates in high-fat diets significantly accelerates development of obesity-driven metabolic complications and atherosclerotic plaque formation parallel to obesity-induced adipose tissue inflammation in LDLR-/- mice. Hence LDLR-/- mice fed high-fat high-sucrose cholesterol-enriched diet appear to be a suitable and time-saving animal model for cardio-metabolic disease. Moreover our results support the suggested interrelation between adipose tissue inflammation and atherosclerotic plaque formation.

Strategies to Improve Resident Wellness in Plastic Surgery Training.

Residency is known to be a challenging time in a surgeon's career. Surgical residents must learn the breadth of their field and develop technical skills while maintaining relationships and well-being outside their training. High burnout rates are well documented among all medical specialties, particularly during residency. Proven strategies in medical education that help decrease burnout and improve resident well-being, while maintaining quality patient care, have been reported in the medical education literature. However, little has been published specific to plastic surgery training programs. We discuss strategies that can be implemented into the curricula and workflow at plastic surgery residency programs to maximize resident well-being. We advocate for a multifaceted approach that includes a night float system, day call, integrating advanced practice providers to offload noneducational resident tasks, and establishing a wellness program. It is our hope that these strategies may serve as a guide for plastic surgery residency programs to promote general wellness and prevent burnout among trainees.

Strategies to Reduce Congestion in the Resident Match: What Can Plastic Surgery Learn from Other Specialties?

Many medical specialties are experiencing congestion in the residency match process because of increasing competition amongst applicants to secure a training position. With rising application numbers for a stable number of positions, the result is an inefficient use of time and financial resources on behalf of both the residency applicants and programs. Solutions to address congestion in the match process have been proposed in the literature, and other specialties have implemented specialty-wide reforms. Methods: The Pubmed and Web of Science databases were queried using keywords related to the residency match and resident selection. The initial search yielded 372 results. Titles and abstracts were evaluated for inclusion and 93 articles met criteria for full-text evaluation. The bibliographies of these publications were reviewed for additional references. Results: Numerous strategies to reduce congestion in the match were identified across specialties. Implemented reforms include a centralized preference signaling system, an interview cap, a staged or consortia match, and publication of transparent program-specific resident selection criteria. We discuss pros and cons of different strategies to reduce congestion in the match and summarize the effects that recent reforms have had on other specialties. Conclusions: Plastic surgery as a field is at a distinct advantage to be a leader in transforming the residency match process, as we are a small and historically innovative group. We hope to spark discussion amongst students, residents, and program faculty with the goal of creating a more efficient match process.

Early Women Pioneers and the Evolution of Women in Plastic Surgery.

The history of women in surgery has been documented since ancient times. Despite this, women physicians have historically encountered unique obstacles in achieving the same respect and privileges as their male counterparts. Early female physicians overcame many challenges to complete their training following graduation from medical school. The first woman in the field of plastic surgery in the United States was Dr. Alma Dea Morani, who became a member of the American Society of Plastic and Reconstructive Surgeons (ASPRS, now ASPS) in 1948. She applied for plastic surgery training six different times over 6 years, until she was accepted at a position where she had shadowing-only privileges. Yet, her steadfast determination and perseverance led her to build a successful career, becoming a role model and advocate for women in plastic surgery. The Women Plastic Surgeons Forum within ASPRS was officially established in 1992; however, informal events began as early as 1979. This group fostered mentorship among emerging female leaders, allowing women to take on leadership roles within national plastic surgery organizations. These women, in turn, have become role models for subsequent generations of women in this field. Plastic surgery has historically seen a higher percentage of female residents relative to other surgical specialties. Studies have shown that female role models are the most influential factor for female medical students interested in plastic surgery, a powerful fact considering women now comprise over 50% of graduating medical students. Female mentorship is essential in fostering the future generation of female plastic surgeons.

Does early post-operative exercise influence bone healing kinetics? Preclinical evaluation of non-critical sized femur defect healing.

Physical exercise is a well-known modality for maintaining healthy locomotor mechanism. A detailed preclinical research on physical exercise effect on bone healing kinetics could help to improve the rehabilitation process after fracture treatment and bone remodeling. Our aim was to evaluate the effect of early post-operative exercise effect on bone microstructural changes in a rat model. Twenty Sprague Dawley male rats underwent bi-cortical 1.6 mm hole drilling in both femur diaphysis, after which (n = 10) underwent continuous treadmill training (TR) over two weeks, while the other group of rats (n = 10) was assigned to non-training (NT) control group. New bone formation labeling was performed by subcutaneous fluorochrome injections at day 5, 14 and 31. In vivo micro-computed tomography (µCT) scans were performed once a week during the 6-week post-operative period. Ten animals (five from each group) were euthanized at 3rd week while remaining animals were euthanized at 6th week. Femur samples were extracted and underwent ex vivo µCT and histological evaluation, while serum was used for evaluating alkaline phosphatase (ALP). µCT data demonstrated increased volume and surface of newly formed bone in defect area of TR group. Bone volume/Tissue volume (BV/TV) ratio and number of osteocytes showed an increase in TR group after 3-week period. Fluorochrome distances were increased between day 5 and 14 within the training group. Serum ALP level increased in both groups over 3- and 6-weeks. Post-operative exercise increases the bone healing kinetics and stimulates the new bone formation during and after the training protocol has ended.

Degradation behavior and osseointegration of Mg-Zn-Ca screws in different bone regions of growing sheep: a pilot study.

Magnesium (Mg)-based implants are highly attractive for the orthopedic field and may replace titanium (Ti) as support for fracture healing. To determine the implant-bone interaction in different bony regions, we implanted Mg-based alloy ZX00 (Mg < 0.5 Zn < 0.5 Ca, in wt%) and Ti-screws into the distal epiphysis and distal metaphysis of sheep tibiae. The implant degradation and osseointegration were assessed in vivo and ex vivo after 4, 6 and 12 weeks, using a combination of clinical computed tomography, medium-resolution micro computed tomography (µCT) and high-resolution synchrotron radiation µCT (SRµCT). Implant volume loss, gas formation and bone growth were evaluated for both implantation sites and each bone region independently. Additionally, histological analysis of bone growth was performed on embedded hard-tissue samples. We demonstrate that in all cases, the degradation rate of ZX00-implants ranges between 0.23 and 0.75 mm/year. The highest degradation rates were found in the epiphysis. Bone-to-implant contact varied between the time points and bone types for both materials. Mostly, bone-volume-to-total-volume was higher around Ti-implants. However, we found an increased cortical thickness around the ZX00-screws when compared with the Ti-screws. Our results showed the suitability of ZX00-screws for implantation into the distal meta- and epiphysis.

The combined effect of zinc and calcium on the biodegradation of ultrahigh-purity magnesium implants.

Magnesium (Mg)-based implants are promising candidates for orthopedic interventions, because of their biocompatibility, good mechanical features, and ability to degrade completely in the body, eliminating the need for an additional removal surgery. In the present study, we synthesized and investigated two Mg-based materials, ultrahigh-purity ZX00 (Mg-Zn-Ca; <0.5 wt% Zn and <0.5 wt% Ca, in wt%; Fe-content <1 ppm) and ultrahigh-purity Mg (XHP-Mg, >99.999 wt% Mg; Fe-content <1 ppm), in vitro and in vivo in juvenile healthy rats to clarify the effect of the alloying elements Zn and Ca on mechanical properties, microstructure, cytocompatibility and degradation rate. Potential differences in bone formation and bone in-growth were also assessed and compared with state-of-the-art non-degradable titanium (Ti)-implanted, sham-operated, and control (non-intervention) groups, using micro-computed tomography, histology and scanning electron microscopy. At 6 and 24 weeks after implantation, serum alkaline phosphatase (ALP), calcium (Ca), and Mg level were measured and bone marrow stromal cells (BMSCs) were isolated for real-time PCR analysis. Results show that ZX00 implants have smaller grain size and superior mechanical properties than XHP-Mg, and that both reveal good biocompatibility in cytocompatibilty tests. ZX00 homogenously degraded with an increased gas accumulation 12 and 24 weeks after implantation, whereas XHP-Mg exhibited higher gas accumulation already at 2 weeks. Serum ALP, Ca, and Mg levels were comparable among all groups and both Mg-based implants led to similar relative expression levels of Alp, Runx2, and Bmp-2 genes at weeks 6 and 24. Histologically, Mg-based implants are superior for new bone tissue formation and bone in-growth compared to Ti implants. Furthermore, by tracking the sequence of multicolor fluorochrome labels, we observed higher mineral apposition rate at week 2 in both Mg-based implants compared to the control groups. Our findings suggest that (i) ZX00 and XHP-Mg support bone formation and remodeling, (ii) both Mg-based implants are superior to Ti implants in terms of new bone tissue formation and osseointegration, and (iii) ZX00 is more favorable due to its lower degradation rate and moderate gas accumulation.

Notch3 deletion regulates HIV-1 gene expression and systemic inflammation to ameliorate chronic kidney disease.

Antiretroviral therapy (ART) has profoundly decreased HIV-1 associated morbidity. However, despite ART, immune cells remain latently infected and slowly release viral proteins, leading to chronic inflammation and HIV associated comorbidities. Thus, new strategies are needed to reduce the inflammatory effects of HIV-1. In previous studies we found that gamma secretase inhibitor (GSIXX) ameliorated renal lesions of HIV-Tg26 mice carrying replication defective HIV-1 PNL4-3 by inhibiting Notch activation. Since gamma secretase inhibition is not a safe strategy in humans, here we examined the specific role of the Notch3 pathway in the pathogenesis of the renal lesions and outcome of HIV-Tg26 mice. We found that Notch3 is activated in podocytes and other renal cells in HIV-Tg26 mice and human biopsies with HIV-1 associated Nephropathy (HIVAN). Knockdown of Notch3 in HIV-Tg26 mice revealed a marked reduction in the mortality rate, improvement in renal injury and function. RNA sequencing and immunolabeling data revealed that Notch3 deletion drastically reduced infiltrating renal macrophages in HIV-Tg-N3KO mice in association with renal reduction of HIV-nef mRNA expression levels. In fact, bone marrow derived macrophages from HIV-Tg26 mice showed a significant activation of Notch3 signaling. Further, systemic levels of TNF-alpha and MCP-1 and other inflammatory chemokines and cytokines were reduced in Tg-N3KO mice as compared to HIV-Tg26 mice and this translated to a marked reduction of HIV-induced skin lesions. Taken together, these studies strongly point to a dual inhibitory/therapeutic effect of Notch3 inhibition on HIV-induced systemic, skin and renal lesions independently of ART.

Immunological reaction to magnesium-based implants for orthopedic applications. What do we know so far? A systematic review on in vivo studies.

Magnesium-based implants (Mg) became an attractive candidate in orthopedic surgery due to their valuable properties, such as osteoconductivity, biodegradability, elasticity and mechanical strength. However, previous studies on biodegradable and non-biodegradable metal implants showed that these materials are not inert when placed in vivo as they interact with host defensive mechanisms. The aim of this study was to systematically review available in vivo studies with Mg-based implants that investigated immunological reactions to these implants. The following questions were raised: Do different types of Mg-based implants in terms of shape, size and alloying system cause different extent of immune response? and; Are there missing links to properly understand immunological reactions upon implantation and degradation of Mg-based implants? The database used for the literature research was PubMed (U.S. National Library of Medicine) and it was undertaken in the end of 2021. The inclusion criteria comprised (i) in vivo studies with bony implantation of Mg-based implants and (ii) analysis of the presence of local immune cells or systemic inflammatory parameters. We further excluded any studies involving coated Mg-implants, in vitro studies, and studies in which the implants had no bone contact. The systematic search process was conducted according to PRISMA guidelines. Initially, the search yielded 225 original articles. After reading each article, and based on the inclusion and exclusion criteria, 16 articles were included in the systematic review. In the available studies, Mg-based implants were not found to cause any severe inflammatory reaction, and only a mild to moderate inflammatory potential was attributed to the material. The timeline of foreign body giant cell formation showed to be different between the reviewed studies. The variety of degradation kinetics of different tested implants and discrepancies in studies regarding the time points of immunological investigations impair the conclusion of immunological reactions. This may be induced by different physical properties of an implant such as size, shape and alloying system. Further research is essential to elucidate the underlying mechanisms by which implant degradation affects the immune system. Also, better understanding will facilitate the decision of patients whether to undergo surgery with new device implantation.

Solar Burns to the Reconstructed Breast: A Rare Complication following Breast Reconstruction.

Burns to the breast are a rare complication after breast reconstruction. Decreased sensation and radiation therapy may contribute to the development of burns. Solar burns may also be related to wearing dark-colored clothing. This literature review aims to analyze the incidence of solar burns on alloplastic and autologous breast reconstruction following mastectomy. Also included is the first published report of a delayed breast burn years after alloplastic reconstruction. Methods: A PubMed literature search of articles was performed using the search formula "burns" AND "breast reconstruction." Abstracts were evaluated for relevance based on inclusion and exclusion criteria. Pertinent reference bibliographies were then screened for additional relevant resources. Results: The PubMed search resulted in 598 articles, of which 12 met inclusion criteria with 22 cases of solar burns to reconstructed breasts (23 including the addition of our case report). Five occurred following alloplastic reconstruction with 80% of these patients radiated and 100% wearing dark clothing. The remaining 18 patients had autologous reconstruction with 50% wearing dark clothing. Twenty-two percent of patients in the autologous group required surgical debridement as compared to 40% of the alloplastic group. Conclusions: Solar burns in autologous and alloplastic breast reconstruction, while rare, pose significant complications in the reconstructed breast and appear to be exacerbated by radiation and dark-colored clothing. Patients should be counseled accordingly with discussion of this potential risk in a comprehensive informed consent, and precautions should be recommended to avoid this type of injury.

Autologous Breast Reconstruction is Associated with Lower 90-day Readmission Rates.

BACKGROUND: Breast reconstruction is associated with improved quality of life after mastectomy. Options for breast reconstruction include autologous and implant-based methods. Although autologous reconstruction is more technically challenging and requires longer operative time, it is thought of as the gold standard. Our study examined differences in 90-day readmission rates between implant-based and autologous breast reconstruction using discharge data from the National Readmission Database, Healthcare Cost and Utilization Project, and Agency for Healthcare Research and Quality. METHODS: The National Readmission Database was used to identify patients undergoing postmastectomy breast reconstruction. Patients were selected using ICD-10 PCS codes linked to autologous and implant-based reconstruction. Ninety-day readmission rates were determined. After matching the two groups on a 1:1 basis for baseline comorbidities and demographics, a multivariable logistic regression analysis was performed to variables associated with higher readmission rates. RESULTS: The leading diagnoses associated with readmissions were infectious and pulmonary. After one to one matching, autologous breast reconstruction, private insurance versus Medicaid, and income quartile 4 versus 1 were all less likely to be readmitted within 90 days of discharge. Patients with a high Charlson index and those with a longer length of initial hospital stay are significantly more likely to be readmitted within 90 days. CONCLUSIONS: Patients undergoing autologous breast reconstruction were 23% less likely to be readmitted within 90 days from discharge. Fewer comorbidities, shorter length of hospital stay, and higher socioeconomic status are also associated with lower readmission rates following breast reconstruction.

Osteotomy after medial malleolus fracture fixed with magnesium screws ZX00 - A case report.

Magnesium alloys have recently become the focus of research, as these implants exhibit suitable biocompatibility and appropriate mechanical properties (Grün et al., 2018 [1]). Through intensive preclinical and clinical investigation, many questions regarding stability, biocompatibility and degradation behavior have been answered (Holweg et al., 2020 [2]). This case report aims to describe handling of these implants in a revision situation, especially when located in situ. To describe available options and relevant considerations, including planning and implementation, a revision surgery of a healed medial malleolus fracture is presented. A medial malleolus fracture was primarily treated by a trauma surgeon with two magnesium screws. Due to an osteochondral lesion of the talus, a revision surgery with osteotomy of the medial malleolus was necessary after 17 months. In this revision, conventional screw removal was not possible due to the degradation of the implant. Taking the degradation and the yield strength of the implant into account, we have chosen on the one hand to over-drill and on the other to leave and perforate the screw. To the best of our knowledge, this is the first case study focusing on the clinical intraoperative site of human bone stabilized with magnesium screws. Despite the hydrogen gas production that occurs during degradation, a solid bone-to-implant interface was evident. With this report, we want to encourage the surgical user to get more involved with resorbable magnesium implants.

Can Hardware Removal be Avoided Using Bioresorbable Mg-Zn-Ca Screws After Medial Malleolar Fracture Fixation? Mid-Term Results of a First-In-Human Study.

Ankle is the most common site of hardware removal, mainly performed within 12 months of the primary surgery. The prominence of the metallic hardware is a frequent cause of pain after fracture fixation. Over the last decade, the development of bioresorbable materials based on magnesium (Mg) has increased. Bioresorbable metals aim to avoid a second surgery for hardware removal. METHODS: Twenty patients with isolated, bimalleolar, or trimalleolar ankle fractures were treated with bioresorbable screws made of Mg, 0.45wt% calcium (Ca) and 0.45wt% zinc (Zn) (ZX00). Patient-reported outcome measures (PROMs) including visual analogue scale (VAS) for pain, the presence of complications 6 and 12 months after surgery and the AOFAS scale after 12 months were reported. The functional outcomes were analysed through the range of motion (ROM) of the ankle joint with a standard goniometer. Degradation products and the bioresorbability of the screws were evaluated using plane radiographs. RESULTS: One patient was lost to follow-up. All patients were free of pain, no complications, shoe conflict or misalignement were reported after 12 months of follow-up. No Mg screws were surgically removed. An additional fixation of the distal fibula or the dorsal tibial fragment with conventional titanium implants (Ti) was performed in 17 patients. Within 12 months after primary refixation, 12 of these patients (71%) underwent a second surgery for Ti hardware removal. The mean AOFAS score was 89.8±7.1 and the difference between the treated and the non-treated site in the ROM of the talocrural joint was 2°±11° after 12 months. Radiolucent areas around the screws were attributed to degradation and did not affect clinical or functional outcomes. After one year, the Mg screw heads could not be detected in the plane radiographs of 17 patients which suggests that the majority of the screw head is degraded without introducing adverse reactions. CONCLUSIONS: At 6 and 12 months, the bioresorbable Mg screws show excellent PROMs without complications or need for screw removal. The resorbability of the screw heads in most of the patients after one year could also provide an advantage over conventional bio-inert implants by avoiding related skin irritation due for instance to shoe conflict.

Implant degradation of low-alloyed Mg-Zn-Ca in osteoporotic, old and juvenile rats.

Implant removal is unnecessary for biodegradable magnesium (Mg)-based implants and, therefore, the related risk for implant-induced fractures is limited. Aging, on the other hand, is associated with low bone-turnover and decreased bone mass and density, and thus increased fracture risk. Osteoporosis is accompanied by Mg deficiency, therefore, we hypothesized that Mg-based implants may support bone formation by Mg2+ ion release in an ovariectomy-induced osteoporotic rat model. Hence, we investigated osseointegration and implant degradation of a low-alloyed, degrading Mg-Zn-Ca implant (ZX00) in ovariectomy-induced osteoporotic (Osteo), old healthy (OH), and juvenile healthy (JH) groups of female Sprague Dawley rats via in vivo micro-computed tomography (µCT). For the Osteo rats, we demonstrate diminished trabecular bone already after 8 weeks upon ovariectomy and significantly enhanced implant volume loss, with correspondingly pronounced gas formation, compared to the OH and JH groups. Sclerotic rim development was observed in about half of the osteoporotic rats, suggesting a prevention from foreign-body and osteonecrosis development. Synchrotron radiation-based µCT confirmed lower bone volume fractions in the Osteo group compared to the OH and JH groups. Qualitative histological analysis additionally visualized the enhanced implant degradation in the Osteo group. To date, ZX00 provides an interesting implant material for young and older healthy patients, but it may not be of advantage in pharmacologically untreated osteoporotic conditions. STATEMENT OF SIGNIFICANCE: Magnesium-based implants are promising candidates for treatment of osteoporotic fractures because of their biodegradable, biomechanical, anti-bacterial and bone regenerative properties. Here we investigate magnesium‒zinc‒calcium implant materials in a rat model with ovariectomy-induced osteoporosis (Osteo group) and compare the related osseointegration and implant degradation with the results obtained for old healthy (OH) and juvenile healthy (JH) rats. The work applied an appropriate disease model for osteoporosis and focused in particular on long-term implant degradation for different bone conditions. Enhanced implant degradation and sclerotic rim formation was observed in osteoporotic rats, which illustrates that the setting of different bone models generates significantly modified clinical outcome. It further illustrated that these differences must be taken into account in future biodegradable implant development.

Bioresorbable Magnesium-Based Alloys as Novel Biomaterials in Oral Bone Regeneration: General Review and Clinical Perspectives.

Bone preservation and primary regeneration is a daily challenge in the field of dental medicine. In recent years, bioresorbable metals based on magnesium (Mg) have been widely investigated due to their bone-like modulus of elasticity, their high biocompatibility, antimicrobial, and osteoconductive properties. Synthetic Mg-based biomaterials are promising candidates for bone regeneration in comparison with other currently available pure synthetic materials. Different alloys based on Mg were developed to fit clinical requirements. In parallel, advances in additive manufacturing offer the possibility to fabricate experimentally bioresorbable metallic porous scaffolds. This review describes the promising clinical results of resorbable Mg-based biomaterials for bone repair in osteosynthetic application and discusses the perspectives of use in oral bone regeneration.

Technical Refinement in Three-Dimensional Nipple-Areola Complex Tattooing of the Reconstructed Breast.

SUMMARY: Three-dimensional nipple-areola complex tattooing has previously been described as an alternative to surgical reconstruction using local flaps and grafts. This technique offers patients an option that can achieve aesthetically pleasing results without a donor site, changes in projection over time, or additional scarring. Plastic surgeons may be limited in their ability to create a realistic-appearing nipple-areola complex because of limited experience with basic tattooing techniques and unfamiliarity with the artistic principles of light and shadow required to create depth on a two-dimensional surface. Consistent results can be achieved with attention to the technical pearls discussed in this article.