Chiral phonons in quartz probed by X-rays.

The concept of chirality is of great relevance in nature, from chiral molecules such as sugar to parity transformations in particle physics. In condensed matter physics, recent studies have demonstrated chiral fermions and their relevance in emergent phenomena closely related to topology1-3. The experimental verification of chiral phonons (bosons) remains challenging, however, despite their expected strong impact on fundamental physical properties4-6. Here we show experimental proof of chiral phonons using resonant inelastic X-ray scattering with circularly polarized X-rays. Using the prototypical chiral material quartz, we demonstrate that circularly polarized X-rays, which are intrinsically chiral, couple to chiral phonons at specific positions in reciprocal space, allowing us to determine the chiral dispersion of the lattice modes. Our experimental proof of chiral phonons demonstrates a new degree of freedom in condensed matter that is both of fundamental importance and opens the door to exploration of new emergent phenomena based on chiral bosons.

Non-volatile electric-field control of inversion symmetry.

Competition between ground states at phase boundaries can lead to significant changes in properties under stimuli, particularly when these ground states have different crystal symmetries. A key challenge is to stabilize and control the coexistence of symmetry-distinct phases. Using BiFeO3 layers confined between layers of dielectric TbScO3 as a model system, we stabilize the mixed-phase coexistence of centrosymmetric and non-centrosymmetric BiFeO3 phases at room temperature with antipolar, insulating and polar semiconducting behaviour, respectively. Application of orthogonal in-plane electric (polar) fields results in reversible non-volatile interconversion between the two phases, hence removing and introducing centrosymmetry. Counterintuitively, we find that an electric field 'erases' polarization, resulting from the anisotropy in octahedral tilts introduced by the interweaving TbScO3 layers. Consequently, this interconversion between centrosymmetric and non-centrosymmetric phases generates changes in the non-linear optical response of over three orders of magnitude, resistivity of over five orders of magnitude and control of microscopic polar order. Our work establishes a platform for cross-functional devices that take advantage of changes in optical, electrical and ferroic responses, and demonstrates octahedral tilts as an important order parameter in materials interface design.

Surface-Symmetry-Driven Dzyaloshinskii-Moriya Interaction and Canted Ferrimagnetism in Collinear Magnetoelectric Antiferromagnet Cr_{2}O_{3}.

Antiferromagnets are normally thought of as materials with compensated magnetic sublattices. This adds to their technological advantages but complicates readout of the antiferromagnetic state. We demonstrate theoretically the existence of a Dzyaloshinskii-Moriya interaction (DMI), which is determined by the magnetic symmetry classes of Cr_{2}O_{3} surfaces with an in-plane magnetic easy axis. The DMI explains a previously predicted out-of-plane magnetization at the nominally compensated surfaces of chromia, leading to a surface-localized canted ferrimagnetism. This is in agreement with magnetotransport measurements and with density functional theory predictions that further allow us to quantify the strength of DMI. The temperature dependence of the transversal resistance for these planes shows distinct behavior in comparison with that of the Cr_{2}O_{3} c plane, which we attribute to the influence of DMI. Our Letter provides a framework to analyze surface-driven phenomena in antiferromagnets, and motivates the use of nominally compensated chromia surfaces for antiferromagnetic spintronics and magnonics.

Characterizing and Overcoming Surface Paramagnetism in Magnetoelectric Antiferromagnets.

We use a combination of density functional theory and Monte Carlo methods to calculate the surface magnetization in magnetoelectric Cr_{2}O_{3} at finite temperatures. Such antiferromagnets, lacking both inversion and time-reversal symmetries, are required by symmetry to possess an uncompensated magnetization density on particular surface terminations. Here, we first show that the uppermost layer of magnetic moments on the ideal (001) surface remains paramagnetic at the bulk Néel temperature, bringing the theoretical estimate of surface magnetization density in line with experiment. We demonstrate that the lower surface ordering temperature compared to bulk is a generic feature of surface magnetization when the termination reduces the effective Heisenberg coupling. We then propose two methods by which the surface magnetization in Cr_{2}O_{3} could be stabilized at higher temperatures. Specifically, we show that the effective coupling of surface magnetic ions can be drastically increased either by a different choice of surface Miller plane, or by Fe doping. Our findings provide an improved understanding of surface magnetization properties in AFMs.

Interface and surface stabilization of the polarization in ferroelectric thin films.

Ferroelectric perovskites present a switchable spontaneous polarization and are promising energy-efficient device components for digital information storage. Full control of the ferroelectric polarization in ultrathin films of ferroelectric perovskites needs to be achieved in order to apply this class of materials in modern devices. However, ferroelectricity itself is not well understood in this nanoscale form, where interface and surface effects become particularly relevant and where loss of net polarization is often observed. In this work, we show that the precise control of the structure of the top surface and bottom interface of the thin film is crucial toward this aim. We explore the properties of thin films of the prototypical ferroelectric lead titanate (PbTiO3) on a metallic strontium ruthenate (SrRuO3) buffer using a combination of computational (density functional theory) and experimental (optical second harmonic generation) methods. We find that the polarization direction and strength are influenced by chemical and electronic processes occurring at the epitaxial interface and at the surface. The polarization is particularly sensitive to adsorbates and to surface and interface defects. These results point to the possibility of controlling the polarization direction and magnitude by engineering specific interface and surface chemistries.

Magnetoelectric Classification of Skyrmions.

We develop a general theory to classify magnetic skyrmions and related spin textures in terms of their magnetoelectric multipoles. Since magnetic skyrmions are now established in insulating materials, where the magnetoelectric multipoles govern the linear magnetoelectric response, our classification provides a recipe for manipulating the magnetic properties of skyrmions using applied electric fields. We apply our formalism to skyrmions and antiskyrmions of different helicities, as well as to magnetic bimerons, which are topologically, but not geometrically, equivalent to skyrmions. We show that the nonzero components of the magnetoelectric multipole and magnetoelectric response tensors are uniquely determined by the topology, helicity, and geometry of the spin texture. Therefore, we propose straightforward linear magnetoelectric response measurements as an alternative to Lorentz microscopy for characterizing insulating skyrmionic textures.

Hidden k-Space Magnetoelectric Multipoles in Nonmagnetic Ferroelectrics.

In condensed matter systems, the electronic degrees of freedom are often entangled to form complex composites, known as hidden orders, which give rise to unusual properties, while escaping detection in conventional experiments. Here we demonstrate the existence of hidden k-space magnetoelectric multipoles in nonmagnetic systems with broken space-inversion symmetry. These k-space magnetoelectric multipoles are reciprocal to the real-space charge dipoles associated with the broken inversion symmetry. Using the prototypical ferroelectric PbTiO_{3} as an example, we show that their origin is a spin asymmetry in momentum space resulting from the broken space inversion symmetry associated with the ferroelectric polarization. In PbTiO_{3}, the k-space spin asymmetry corresponds to a pure k-space magnetoelectric toroidal moment, which can be detected using magnetic Compton scattering, an established tool for probing magnetism in ferromagnets or ferrimagnets with a net spin polarization, which has not been exploited to date for nonmagnetic systems. In particular, the k-space magnetoelectric toroidal moment combined with the spin-orbit interaction manifest in an antisymmetric magnetic Compton profile that can be reversed using an electric field. Our work suggests an experimental route to directly measuring and tuning hidden k-space magnetoelectric multipoles via specially designed magnetic Compton scattering measurements.

On the happiness of ferroelectric surfaces and its role in water dissociation: The example of bismuth ferrite.

We investigate, using density functional theory, how the interaction between the ferroelectric polarization and the chemical structure of the (001) surfaces of bismuth ferrite influences the surface properties and reactivity of this material. A precise understanding of the surface behavior of ferroelectrics is necessary for their use in surface science applications such as catalysis as well as for their incorporation in microelectronic devices. Using the (001) surface of bismuth ferrite as a model system, we show that the most energetically favored surface geometries are combinations of surface termination and polarization direction that lead to uncharged stable surfaces. On the unfavorable charged surfaces, we explore the compensation mechanisms of surface charges provided by the introduction of point defects and adsorbates, such as water. Finally, we propose that the special surface properties of bismuth ferrite (001) could be used to produce an effective water splitting cycle through cyclic polarization switching.

Layer and spontaneous polarizations in perovskite oxides and their interplay in multiferroic bismuth ferrite.

We review the concept of surface charge, first, in the context of the polarization in ferroelectric materials and, second, in the context of layers of charged ions in ionic insulators. While the former is traditionally discussed in the ferroelectrics community and the latter in the surface science community, we remind the reader that the two descriptions are conveniently unified within the modern theory of polarization. In both cases, the surface charge leads to electrostatic instability-the so-called "polar catastrophe"-if it is not compensated, and we review the range of phenomena that arise as a result of different compensation mechanisms. We illustrate these concepts using the example of the prototypical multiferroic bismuth ferrite, BiFeO3, which is unusual in that its spontaneous ferroelectric polarization and the polarization arising from its layer charges can be of the same magnitude. As a result, for certain combinations of polarization orientation and surface termination, its surface charge is self-compensating. We use density functional calculations of BiFeO3 slabs and superlattices, analysis of high-resolution transmission electron micrographs, and examples from the literature to explore the consequences of this peculiarity.

Multiferroic quantum criticality.

The zero-temperature limit of a continuous phase transition is marked by a quantum critical point, which can generate physical effects that extend to elevated temperatures. Magnetic quantum criticality is now well established, and has been explored in systems ranging from heavy fermion metals to quantum Ising materials. Ferroelectric quantum critical behaviour has also been recently demonstrated, motivating a flurry of research investigating its consequences. Here, we introduce the concept of multiferroic quantum criticality, in which both magnetic and ferroelectric quantum criticality occur in the same system. We develop the phenomenology of multiferroic quantum criticality and describe the associated experimental signatures, such as phase stability and modified scaling relations of observables. We propose several material systems that could be tuned to multiferroic quantum criticality utilizing alloying and strain as control parameters. We hope that these results stimulate exploration of the interplay between different kinds of quantum critical behaviours.

Dynamical Magnetic Field Accompanying the Motion of Ferroelectric Domain Walls.

The recently proposed dynamical multiferroic effect describes the generation of magnetization from temporally varying electric polarization. Here, we show that the effect can lead to a magnetic field at moving ferroelectric domain walls, where the rearrangement of ions corresponds to a rotation of ferroelectric polarization in time. We develop an expression for the dynamical magnetic field, and calculate the relevant parameters for the example of 90° and 180° domain walls, as well as for polar skyrmions, in BaTiO_{3}, using a combination of density functional theory and phenomenological modeling. We find that the magnetic field reaches the order of several µT at the center of the wall, and we propose two experiments to measure the effect with nitrogen-vacancy center magnetometry.

Magnetoelectric multipoles in metals.

In this paper, we demonstrate computationally the existence of magnetoelectric multipoles, arising from the second-order term in the multipole expansion of a magnetization density in a magnetic field, in non-centrosymmetric magnetic metals. While magnetoelectric multipoles have long been discussed in the context of the magnetoelectric effect in non-centrosymmetric magnetic insulators, they have not previously been identified in metallic systems, in which the mobile carriers screen any electrical polarization. Using first-principles density functional calculations, we explore three specific systems: first, a conventional centrosymmetric magnetic metal, Fe, in which we break inversion symmetry by introducing a surface, which both generates magnetoelectric monopoles and allows a perpendicular magnetoelectric response. Next, the hypothetical cation-ordered perovskite, SrCaRu2O6, in which we study the interplay between the magnitude of the polar symmetry breaking and that of the magnetic dipoles and multipoles, finding that both scale proportionally to the structural distortion. Finally, we identify a hidden antiferromultipolar order in the non-centrosymmetric, antiferromagnetic metal Ca3Ru2O7, and show that, while its competing magnetic phases have similar magnetic dipolar structures, their magnetoelectric multipolar structures are distinctly different, reflecting the strong differences in transport properties.This article is part of the theme issue 'Celebrating 125 years of Oliver Heaviside's 'Electromagnetic Theory''.

Strain-Engineered Oxygen Vacancies in CaMnO3 Thin Films.

We demonstrate a novel pathway to control and stabilize oxygen vacancies in complex transition-metal oxide thin films. Using atomic layer-by-layer pulsed laser deposition (PLD) from two separate targets, we synthesize high-quality single-crystalline CaMnO3 films with systematically varying oxygen vacancy defect formation energies as controlled by coherent tensile strain. The systematic increase of the oxygen vacancy content in CaMnO3 as a function of applied in-plane strain is observed and confirmed experimentally using high-resolution soft X-ray absorption spectroscopy (XAS) in conjunction with bulk-sensitive hard X-ray photoemission spectroscopy (HAXPES). The relevant defect states in the densities of states are identified and the vacancy content in the films quantified using the combination of first-principles theory and core-hole multiplet calculations with holistic fitting. Our findings open up a promising avenue for designing and controlling new ionically active properties and functionalities of complex transition-metal oxides via strain-induced oxygen-vacancy formation and ordering.

Erratum: Quantum Critical Origin of the Superconducting Dome in SrTiO_{3} [Phys. Rev. Lett. 115, 247002 (2015)].

This corrects the article DOI: 10.1103/PhysRevLett.115.247002.

Landau theory of topological defects in multiferroic hexagonal manganites.

Topological defects in ordered states with spontaneously broken symmetry often have unusual physical properties, such as fractional electric charge or a quantized magnetic field flux, originating from their non-trivial topology. Coupled topological defects in systems with several coexisting orders give rise to unconventional functionalities, such as the electric-field control of magnetization in multiferroics resulting from the coupling between the ferroelectric and ferromagnetic domain walls. Hexagonal manganites provide an extra degree of freedom: in these materials, both ferroelectricity and magnetism are coupled to an additional, non-ferroelectric structural order parameter. Here we present a theoretical study of topological defects in hexagonal manganites based on Landau theory with parameters determined from first-principles calculations. We explain the observed flip of electric polarization at the boundaries of structural domains, the origin of the observed discrete vortices, and the clamping between ferroelectric and antiferromagnetic domain walls. We show that structural vortices induce magnetic ones and that, consistent with a recent experimental report, ferroelectric domain walls can carry a magnetic moment.

Quantum Critical Origin of the Superconducting Dome in SrTiO_{3}.

We expand the well-known notion that quantum criticality can induce superconductivity by proposing a concrete mechanism for superconductivity due to quantum ferroelectric fluctuations. To this end, we investigate the origin of superconductivity in doped SrTiO_{3} using a combination of density functional and strong coupling theories within the framework of quantum criticality. Our density functional calculations of the ferroelectric soft mode frequency as a function of doping reveal a crossover related to quantum paraelectricity at a doping level coincident with the experimentally observed top of the superconducting dome. Thus, we suggest a model in which the soft mode fluctuations provide the pairing interaction for superconductivity carriers. Within our model, the low doping limit of the superconducting dome is explained by the emergence of the Fermi surface, and the high doping limit by departure from the quantum critical regime. We predict that the highest critical temperature will increase and shift to lower carrier doping with increasing ^{18}O isotope substitution, a scenario that is experimentally verifiable. Our model is applicable to other quantum paraelectrics, such as KTaO_{3}.

Duality of topological defects in hexagonal manganites.

We show that the spontaneous symmetry breaking in multiferroic hexagonal manganites can be chemically manipulated to yield two complementary ground states: the well-known ferroelectric P6(3)cm and an antipolar P3c phase. Both symmetry breakings yield topologically protected vortex defects, with the antipolar vortices dual to those of the ferroelectric. This duality stems from the existence of 12 possible angles of MnO5 tilting, and broad strain-free walls with low energy spontaneously emerge through an intermediate P3c1 state, providing a complete unified symmetry description.

Perovskite-structure TlMnO3: a new manganite with new properties.

We synthesize a new member of the AMnO3 perovskite manganite family (where A is a trivalent cation)--thallium manganite, TlMnO3--under high-pressure (6 GPa) and high-temperature (1500 K) conditions and show that the structural and magnetic properties are distinct from those of all other AMnO3 manganites. The crystal structure of TlMnO3 is solved and refined using single-crystal X-ray diffraction data. We obtain a triclinically distorted structure with space group P1̅ (No. 2), Z = 4, and lattice parameters a = 5.4248(2) Å, b = 7.9403(2) Å, c = 5.28650(10) Å, α = 87.8200(10)°, ß = 86.9440(10)°, and γ = 89.3130(10)° at 293 K. There are four crystallographic Mn sites in TlMnO3 forming two groups based on the degree of their Jahn-Teller distortions. Physical properties of insulating TlMnO3 are investigated with Mössbauer spectroscopy and resistivity, specific heat, and magnetization measurements. The orbital ordering, which persists to the decomposition temperature of 820 K, suggests A-type antiferromagnetic ordering with the ferromagnetic planes along the [-101] direction, consistent with the measured collinear antiferromagnetism below the Néel temperature of 92 K. Hybrid density functional calculations are consistent with the experimentally identified structure, insulating ground state, and suggested magnetism, and show that the low symmetry originates from the strongly Jahn-Teller distorted Mn(3+) ions combined with the strong covalency of the Tl(3+)-O bonds.

On the sign of the linear magnetoelectric coefficient in Cr2O3.

We establish the sign of the linear magnetoelectric (ME) coefficient,α, in chromia, Cr2O3. Cr2O3is the prototypical linear ME material, in which an electric (magnetic) field induces a linearly proportional magnetization (polarization), and a single magnetic domain can be selected by annealing in combined magnetic (H) and electric (E) fields. Opposite antiferromagnetic (AFM) domains have opposite ME responses, and which AFM domain corresponds to which sign of response has previously been unclear. We use density functional theory (DFT) to calculate the magnetic response of a single AFM domain of Cr2O3to an applied in-plane electric field at zero kelvin. We find that the domain with nearest neighbor magnetic moments oriented away from (towards) each other has a negative (positive) in-plane ME coefficient,α⊥, at zero kelvin. We show that this sign is consistent with all other DFT calculations in the literature that specified the domain orientation, independent of the choice of DFT code or functional, the method used to apply the field, and whether the direct (magnetic field) or inverse (electric field) ME response was calculated. Next, we reanalyze our previously published spherical neutron polarimetry data to determine the AFM domain produced by annealing in combinedEandHfields oriented along the crystallographic symmetry axis at room temperature. We find that the AFM domain with nearest-neighbor magnetic moments oriented away from (towards) each other is produced by annealing in (anti-)parallelEandHfields, corresponding to a positive (negative) axial ME coefficient,α∥, at room temperature. Sinceα⊥at zero kelvin andα∥at room temperature are known to be of opposite sign, our computational and experimental results are consistent.

Three-dimensional domain identification in a single hexagonal manganite nanocrystal.

The three-dimensional domain structure of ferroelectric materials significantly influences their properties. The ferroelectric domain structure of improper multiferroics, such as YMnO3, is driven by a non-ferroelectric order parameter, leading to unique hexagonal vortex patterns and topologically protected domain walls. Characterizing the three-dimensional structure of these domains and domain walls has been elusive, however, due to a lack of suitable imaging techniques. Here, we present a multi-peak Bragg coherent x-ray diffraction imaging determination of the domain structure in single YMnO3 nanocrystals. We resolve two ferroelectric domains separated by a domain wall and confirm that the primary atomic displacements occur along the crystallographic c-axis. Correlation with atomistic simulations confirms the Mexican hat symmetry model of domain formation, identifying two domains with opposite ferroelectric polarization and adjacent trimerization, manifesting in a clockwise arrangement around the hat's brim.