Acute and chronic effects of Titanium dioxide (TiO2) PM1 on honey bee gut microbiota under laboratory conditions.

Apis mellifera is an important provider of ecosystem services, and during flight and foraging behaviour is exposed to environmental pollutants including airborne particulate matter (PM). While exposure to insecticides, antibiotics, and herbicides may compromise bee health through alterations of the gut microbial community, no data are available on the impacts of PM on the bee microbiota. Here we tested the effects of ultrapure Titanium dioxide (TiO2) submicrometric PM (i.e., PM1, less than 1 µm in diameter) on the gut microbiota of adult bees. TiO2 PM1 is widely used as a filler and whitening agent in a range of manufactured objects, and ultrapure TiO2 PM1 is also a common food additive, even if it has been classified by the International Agency for Research on Cancer (IARC) as a possible human carcinogen in Group 2B. Due to its ubiquitous use, honey bees may be severely exposed to TiO2 ingestion through contaminated honey and pollen. Here, we demonstrated that acute and chronic oral administration of ultrapure TiO2 PM1 to adult bees alters the bee microbial community; therefore, airborne PM may represent a further risk factor for the honey bee health, promoting sublethal effects against the gut microbiota.

Determination of vanadium(V) in the particulate matter of emissions and working areas by sequential dissolution and solid-phase extraction.

A method based on selective sequential dissolutions is proposed to determine total vanadium(V) in particulate matter of emissions and working areas at concentrations 1,000 times lower than the threshold limit of 0.05 mg m(-3). Separation and preconcentration of vanadium(V) has been achieved by solid-phase extraction on Chelex 100 resin. Possible influence of the matrix has been investigated for two standard reference materials (SRMs), NIST SRM 1648 and BCR-038, before and after spiking, with vanadium(V) recovery in the range 97-103%.

Sequential extraction procedure for speciation of inorganic cadmium in emissions and working areas.

A sequential extraction procedure for separating and concentrating soluble Cd(II) salts, CdO, Cd(0), CdS, CdSe and cadmium-aluminosilicates, has been developed for the cadmium speciation in samples such as particulate matter in emissions and working areas. The proposed procedure has been tested first on synthetic samples prepared in a laboratory with the different cadmium salts, then also in the presence of atmospherical particulate matter sampled in a laboratory of the Department of Analytical Chemistry, previously checked for the absence of cadmium. Finally the speciation was tested on particulate matter collected near the emission of a power plant fed by coal, after emission's treatment by electrostatic precipitator: matrix spiking and recovery analyses have been evaluated and the repeatability of the cadmium speciation was assessed by performing multiple analyses of the spiked samples. Quantitative determinations have been made by FAAS and GFAAS through the standard additions method.

Spectrophotometric investigation of the reaction of CU(II) and Cu(I) with 1-isonitroso-(1,2,3,4)-tetrahydrophenazine.

The reactions of Cu(II) and Cu(I) with 1-isonitroso-(1,2,3,4)-tetrahydrophenazine (HITF) have been studied spectrophotometrically. Both ions form complexes with metal/ligand ratio 1:2. The complex of Cu(I) and ITF can be used for copper determination in the range 2-50 x 10(-6)M, and has been separated as the perchlorate in crystalline form. The spectrophotometric characteristics and the equilibrium constants for the ligand and for the complexes are reported.

Determination of inorganic beryllium species in the particulate matter of emissions and working areas.

A sequential extraction procedure for separating and determining Be(0), soluble Be(II) inorganic compounds, BeO and beryllium silicates in samples such as particulate matter of emissions and working areas, has been developed. The proposed procedure has been tested on synthetic samples prepared with the inorganic beryllium compounds, in the presence of atmospherical particulate matter sampled in a laboratory of the Department, previously checked for the absence of beryllium. The speciation was then repeated on a sample of fly ash deriving from a solid waste incinerator and on a reference material (Coal Fly ash SRM 1633a, by NIST), followed by an evaluation of matrix spiking and recovery analyses. Performing multiple analyses of the spiked samples assessed the repeatability of the procedure. Quantitative determinations have been made by inductively coupled plasma optical emission spectrometry (ICP-OES) and electrothermal atomic absorption spectrometry (ETAAS). The possible interferences of the most common ions have been investigated. The selective sequential extractions allow one to separate and to determine different inorganic beryllium species, to which a different toxicity and therefore, a different risk are related: it is the case for example of metallic beryllium and beryllium oxide.

Determination of inorganic nickel compounds in the particulate matter of emissions and workplace air by selective sequential dissolutions.

A speciation method of inorganic nickel compounds in airborne particulate, based on selective sequential extractions, is described. It allows the separation and the determination of Ni(0), Ni(II) soluble salts such as sulphate and chloride, Ni insoluble compounds such as nickel oxide and sulphide, to which a different toxicity and therefore a different risk are related. The nickel concentration in each fraction was determined by Flame or Furnace Atomic Absorption Spectroscopy. The proposed procedure has been tested first, on synthetic samples prepared with the different nickel compounds, in the presence of atmospherical particulate matter not containing nickel, in order to take into account the possible matrix influence. The speciation was then repeated on four different samples (fly ash deriving from a solid waste incinerator and three RSMS from NIST: Coal Fly ash SRM 1633b, Urban Particulate 1648, Washington Dust 1649), followed by an evaluation of matrix spiking and recovery analyses. Performing multiple analyses of the spiked samples assessed the repeatability of the procedure.

Sequential extraction procedure for speciation of inorganic selenium in emissions and working areas.

A sequential extraction procedure for separating inorganic species of selenium in particulate matter of emissions and working areas, has been developed. The proposed procedure has been tested first on synthetic samples prepared in laboratory with the different selenium salts, then in the presence of atmospherical particulate matter sampled in a laboratory of the department of general chemistry, previously checked for the absence of selenium. Finally the speciation was tested on a reference material (urban particulate matter NIST SRM 1648), certified for the total selenium content. The sample was first treated with the proposed procedure, followed by an evaluation of matrix spiking and recovery analyses. The repeatability of the selenium speciation was assessed by performing multiple analyses of the spiked samples. Quantitative determinations have been made by AAS and voltammetry. The possible interferences of the most common ions have been investigated.