Catalysis of Methanol Oxidation on Bimetallic Ir/Pt(poly) Electrodes.

Oxidation of methanol was studied in alkaline solution on bimetallic Ir/Pt(poly) catalysts prepared by the spontaneous deposition of Ir on polycrystalline Pt. Nano-scale surface properties of Ir/Pt(poly) catalysts were revealed by ex situ Atomic Force Microscopy imaging. Modified electrodes were characterized in situ electrochemically by cyclic voltammetry in 0.1 M KOH. Investigations of the methanol oxidation in the same alkaline solution showed that Ir/Pt(poly) electrode obtained after 1 minute Ir deposition, which is equivalent to 80% Ir coverage, showed improved activity with respect to both constitutive metals. The observed synergism on the methanol oxidation activity was ascribed to both bifunctional and electronic effects that are induced by the presence of spontaneously deposited Ir. The origin of the synergism and the possible methanol oxidation pathways were discussed on the basis of the activities of the Ir/Pt(poly) electrodes for the oxidation of the most probable reaction intermediates, CO and formaldehyde, in the same alkaline solution.

Natural sorbents modified by divalent Cu2+- and Zn2+- ions and their corresponding antimicrobial activity.

The objective of this study was to investigate the modification of materials used in wastewater treatment for possible antimicrobial application(s). Granulated activated carbon (GAC) and natural clinoptilolite (CLI) were activated using Cu2+- and Zn2+- ions and the disinfection ability of the resulting materials was tested. Studies of the sorption and desorption kinetics were performed in order to determine and clarify the antimicrobial activity of the metal-activated sorbents. The exact sorption capacities of the selected sorbents, GAC and CLI, activated through use of Cu2+- ions, were 15.90 and 3.60mg/g, respectively, while for the materials activated by Zn2+- ions, the corresponding capacities were 14.00 and 4.72mg/g,. The desorption rates were 2 and 3 orders of magnitude lower than their sorption efficacy for the Cu2+-, and Zn2+-activated sorbents, respectively. The intermediate sorption capacity and low desorption rate indicated that the overall antimicrobial activity of the metal-modified sorbents was a result of metal ions immobilized onto surface sites. The effect of antimicrobial activity of free ions desorbed from the metal-activated surface may thus be disregarded. The antimicrobial activities of Cu/GAC, Zn/GAC, Cu/CLI and Zn/CLI were also tested against Escherichia coli, Staphylococcus aureus, and Candida albicans. After 15min exposure, the highest levels of cell inactivation were obtained through the Cu/CLI and the Cu/GAC against E. coli, 100.0 and 98.24%, respectively. However, for S. aureus and yeast cell inactivation, all Cu2+- and Zn2+-activated sorbents proved to be unsatisfactory. A characterization of the sorbents was performed by X-ray diffraction (XRD), X-ray photo electron spectroscopy (XPS), and field emission scanning electron microscopy (FE-SEM). A concentration of the adsorbed and released ions was determined by inductively coupled plasma-optical emission spectroscopy (ICP-OES) and mass spectrometry (ICP-MS). The results showed that the antimicrobial performance of the activated sorbents depended on the surface characteristics of the material, which itself designates the distribution and the bioavailability of the activating agent.

Sorption of zinc by novel pH-sensitive hydrogels based on chitosan, itaconic acid and methacrylic acid.

Novel pH-sensitive hydrogels based on chitosan, itaconic acid and methacrylic acid were applied as adsorbents for the removal of Zn(2+) ions from aqueous solution. In batch tests, the influence of solution pH, contact time, initial metal ion concentration and temperature was examined. The sorption was found pH dependent, pH 5.5 being the optimum value. The adsorption process was well described by the pseudo-second order kinetic. The hydrogels were characterized by spectral (Fourier transform infrared-FTIR) and structural (SEM/EDX and atomic force microscopy-AFM) analyses. The surface topography changes were observed by atomic force microscopy, while the changes in surface composition were detected using phase imaging AFM. The negative values of free energy and enthalpy indicated that the adsorption is spontaneous and exothermic one. The best fitting isotherms were Langmuir and Redlich-Peterson and it was found that both linear and nonlinear methods were appropriate for obtaining the isotherm parameters. However, the increase of temperature leads to higher adsorption capacity, since swelling degree increased with temperature.

Characterization and methanol electrooxidation studies of Pt(111)/Os surfaces prepared by spontaneous deposition.

Catalytic activity of the Pt(111)/Os surface toward methanol electrooxidation was optimized by exploring a wide range of Os coverage. Various methods of surface analyses were used, including electroanalytical, STM, and XPS methods. The Pt(111) surface was decorated with nanosized Os islands by spontaneous deposition, and the Os coverage was controlled by changing the exposure time to the Os-containing electrolyte. The structure of Os deposits on Pt(111) was characterized and quantified by in situ STM and stripping voltammetry. We found that the optimal Os surface coverage of Pt(111) for methanol electrooxidation was 0.7 +/- 0.1 ML, close to 1.0 +/- 0.1 Os packing density. Apparently, the high osmium coverage Pt(111)/Os surface provides more of the necessary oxygen-containing species (e.g., Os-OH) for effective methanol electrooxidation than the Pt(111)/Os surfaces with lower Os coverage (vs e.g., Ru-OH). Supporting evidence for this conjecture comes from the CO electrooxidation data, which show that the onset potential for CO stripping is lowered from 0.53 to 0.45 V when the Os coverage is increased from 0.2 to 0.7 ML. However, the activity of Pt(111)/Os for methanol electrooxidation decreases when the Os coverage is higher than 0.7 +/- 0.1 ML, indicating that Pt sites uncovered by Os are necessary for sustaining significant methanol oxidation rates. Furthermore, osmium is inactive for methanol electrooxidation when the platinum substrate is absent: Os deposits on Au(111), a bulk Os ingot, and thick films of electrodeposited Os on Pt(111), all compare poorly to Pt(111)/Os. We conclude that a bifunctional mechanism applies to the methanol electrooxidation similarly to Pt(111)/Ru, although with fewer available Pt sites. Finally, the potential window for methanol electrooxidation on Pt(111)/Os was observed to shift positively versus Pt(111)/Ru. Because of the difference in the Os and Ru oxophilicity under electrochemical conditions, the Os deposit provides fewer oxygen-containing species, at least below 0.5 V vs RHE. Both higher coverage of Os than Ru and the higher potentials are required to provide a sufficient number of active oxygen-containing species for the effective removal of the site-blocking CO from the catalyst surface when the methanol electrooxidation process occurs.

In situ STM study of Au(111)/Os bimetallic surfaces: spontaneous deposition and electrochemical dissolution.

We provide an electrochemical and structural characterization by in situ STM of Au(111)/Os electrodes prepared by spontaneous deposition of Os on Au(111). Surfaces with Os coverage values up to the saturation coverage were examined, from 10%. Using comparisons to previous work on Au(111)/Ru, Pt(111)/Ru, and Pt(111)/Os, we find that we may now generalize that Os deposits spontaneously faster than Ru and has a greater tendency to form 3-D structures. Additionally, the Au(111) substrate shows preferential step and near-step decoration in both cases, although it is less pronounced for Os than Ru. We also investigated the incremental dissolution of the Os from Au(111), to better understand electrochemical dissolution processes in general and to better control the Os deposit structure. The application of controlled electrochemical treatments (cyclic voltammetry up to increasingly positive values) significantly increased the dispersion of the Os deposit by generating smaller, more widely spaced islands. Upon voltammetry up to 0.75 V, the Au(111)/Os surface showed evidence of alloying and the formation of 3-D structures suggestive of strong Os-Os (oxidized) species interactions. The CO stripping results show the Au(111)/Os is not particularly effective for this reaction, but such results help to complete the overall picture of NM-NM catalytic combinations. Although the Au(111)/Os system itself is not catalytically active, the electrochemical manipulation of the deposit structure demonstrated here may be applied to other noble metal/noble metal (NM/NM) catalytic substrates to find optimal deposit morphologies.