Antiviral Efficacy of a Respiratory Syncytial Virus (RSV) Fusion Inhibitor in a Bovine Model of RSV Infection.

Respiratory syncytial virus (RSV) is the leading cause of bronchiolitis and pneumonia in infants. Effective treatment for RSV infection is a significant unmet medical need. While new RSV therapeutics are now in development, there are very few animal models that mimic the pathogenesis of human RSV, making it difficult to evaluate new disease interventions. Experimental infection of Holstein calves with bovine RSV (bRSV) causes a severe respiratory infection that is similar to human RSV infection, providing a relevant model for testing novel therapeutic agents. In this model, viral load is readily detected in nasal secretions by quantitative real-time PCR (qRT-PCR), and cumulative symptom scoring together with histopathology evaluations of infected tissue allow for the assessment of disease severity. The bovine RSV model was used to evaluate the antiviral activity of an RSV fusion inhibitor, GS1, which blocks virus entry by inhibiting the fusion of the viral envelope with the host cell membrane. The efficacy of GS1, a close structural analog of GS-5806 that is being developed to treat RSV infection in humans was evaluated in two randomized, blind, placebo-controlled studies in bRSV-infected calves. Intravenous administration of GS1 at 4 mg/kg of body weight/day for 7 days starting 24 h or 72 h postinoculation provided clear therapeutic benefit by reducing the viral load, disease symptom score, respiration rate, and lung pathology associated with bRSV infection. These data support the use of the bovine RSV model for evaluation of experimental therapeutics for treatment of RSV.

Structure-activity relationships of diamine inhibitors of cytochrome P450 (CYP) 3A as novel pharmacoenhancers. Part II: P2/P3 region and discovery of cobicistat (GS-9350).

The HIV protease inhibitor (PI) ritonavir (RTV) has been widely used as a pharmacoenhancer for other PIs, which are substrates of cytochrome P450 3A (CYP3A). However the potent anti-HIV activity of ritonavir may limit its use as a pharmacoenhancer with other classes of anti-HIV agents. Ritonavir is also associated with limitations such as poor physicochemical properties. To address these issues a series of compounds with replacements at the P2 and/or P3 region was designed and evaluated as novel CYP3A inhibitors. Through these efforts, a potent and selective inhibitor of CYP3A, GS-9350 (cobicistat) with improved physiochemical properties was discovered.

A review of Formulations of Commercially Available Antibodies.

This review identified 126 commercially available antibodies approved globally between 1986 and February 2021 including 10 antibody drug conjugates, 16 biosimilars, and 3 antibody fragments. Prior to 2014 there were ≤ 5 approved each year, but after 2014 there have been ≥ 7 approved each year with the years 2017, 2019 and 2020 having the most at 17 each. A total of 136 products were identified of which 36 are lyophilized powders and 100 are solutions. The routes of administration are mainly subcutaneous or intravenous infusion with three intravenous bolus, two intravitreal, and one intramuscular. The subcutaneous products are ready-to-use solutions or reconstituted lyophilized powders that do not require dilution while most intravenous products are concentrates that require dilution into saline or another intravenous fluid prior to infusion. Most are packaged in single-dose units and the exception of multi-use is Herceptin® and its biosimilars. The package configurations are vials, prefilled autoinjectors, or prefilled syringes. A typical antibody formulation contains an antibody, an excipient to adjust tonicity or osmolality for solutions or a lyoprotectant for lyophilized powders, a buffer, and a surfactant. The ionic tonicity-adjusting excipient is mainly sodium chloride and the non-ionic osmolality-adjusting excipients include sucrose, trehalose, mannitol, maltose, and sorbitol. The lyoprotectants are trehalose and sucrose. The pH range is 4.8-8.0 and the buffers or pH-modifying agents include histidine, citrate, succinate, acetate, phosphate, glutamate, adipic acid, aspartic acid, lactic acid, tromethamine, and 2-(N-morpholino)-ethanesulfonic acid. The surfactants include mostly polysorbate 20 or polysorbate 80, with four containing poloxamer 188, and one that does not contain a surfactant but contains PEG 3350. One product does not contain a buffer, and 12 do not contain a surfactant. The viscosity-lowering excipients are sodium chloride and the amino acids arginine, glycine, proline, and lysine. Arginine may also function to adjust ionic strength and minimize aggregation. Human serum albumin is used in 2 products for intravenous infusion. Other excipients include methionine as an anti-oxidant, and EDTA or DTPA as chelating agents. The maximum volume of subcutaneous injection is 15 mL administered over 3-5 minutes, but the typically volume is 0.5-2 mL. Five fixed-dose combinations have recently been approved and four contain hyaluronidase to assist the large volume subcutaneous injection of up to 15 mL, while one is a fixed-dose combination for intravenous with three antibodies. Prefilled autoinjectors and syringes are becoming more common and many come affixed with a needle of 27-gauge or 29-gauge, while a few have a 26-gauge or a 30-gauge needle. Recent advancements include hyaluronidase to assist the large subcutaneous injection volume of 5-15 mL, fixed-dose combinations, buffer-free formulation, and smaller subcutaneous injection volume (0.1 mL).

Pediatric Oral Formulations: An Updated Review of Commercially Available Pediatric Oral Formulations Since 2007.

Oral pediatric formulations are either ready-to-use or require manipulation and multiuse or single-use. Strong encouragement for preservative-free pediatric formulations has resulted in fewer multiuse solutions or suspensions in favor of single-use solid oral dosage forms. This updated review covering new pediatric formulations marketed in the United States of America, Europe, and Japan spanning the years 2007 to mid-2018 identified 16 types of pediatric oral formulations of which 7 are ready-to-use and 9 require manipulation, and 51 total new pediatric oral formulations of which 21 are ready-to-use and 30 require manipulation. Ready-to-use formulations include oral solution, oral suspension, oral soluble film, tablet, scored tablets, orally disintegrating tablet, chewable tablet, and mini-tablets. Formulations requiring manipulation include sprinkle capsule, powder for oral solution, powder for oral suspension, granules for oral suspension, oral powder, oral granules, tablet, dispersible tablet, dispersible scored tablet, tablet for oral suspension, and mini-tablets (oral granules). Significant advances in packaging technology include filling mini-tablets, granules, or powders into sachets, stick packets, blisters, and 2-piece capsules. The future of pediatric oral formulations will increasingly be with user-friendly, preservative-free, taste-masked formulations including multiparticulate single-use solid dosage forms including mini-tablets, orally disintegrating tablets, and sprinkle capsules with or without a specialized package configuration.

Pediatric drugs--a review of commercially available oral formulations.

Pediatric oral formulations can be quite scientifically challenging to develop and the prerequisites for both a measurable dosage form to administer based upon bodyweight, and also taste-masking are two of the challenges unique for pediatric oral formulations. The physicochemical and organoleptic properties of the active drug substance such as solubility, chemical stability, and taste along with the intended dose can determine which formulations are feasible to develop. Oral pediatric formulations are available in 17 different varieties and can be either a ready-to-use formulation such as a solution, syrup, suspension, tablet, scored tablet, chewable tablet, orally disintegrating tablet, or thin strip, or can also be a formulation that requires manipulation such as a powder for constitution to a suspension, tablet for constitution to a suspension, powder for constitution to a solution, drops for reconstitution to a suspension, concentrated solution for dilution, effervescent tablet, bulk oral granules, bulk oral powder, or solid in a capsule to mix with food or drink. Recently there has been an increase in pediatric formulation development inspired by increased regulatory incentives. The intent of this review is to educate the reader on the various types of formulations administered orally to pediatrics, the rationale in deciding which type of formulation to develop, the excipients used, development challenges, the in-use handling of oral pediatric formulations, and the regulatory incentives.

Optimization of Pharmacokinetics through Manipulation of Physicochemical Properties in a Series of HCV Inhibitors.

A novel series of HCV replication inhibitors based on a pyrido[3,2-d]pyrimidine core were optimized for pharmacokinetics (PK) in rats. Several associations between physicochemical properties and PK were identified and exploited to guide the design of compounds. In addition, a simple new metric that may aid in the prediction of bioavailability for compounds with higher polar surface area is described (3*HBD-cLogP).

Cobicistat (GS-9350): A Potent and Selective Inhibitor of Human CYP3A as a Novel Pharmacoenhancer.

Cobicistat (3, GS-9350) is a newly discovered, potent, and selective inhibitor of human cytochrome P450 3A (CYP3A) enzymes. In contrast to ritonavir, 3 is devoid of anti-HIV activity and is thus more suitable for use in boosting anti-HIV drugs without risking selection of potential drug-resistant HIV variants. Compound 3 shows reduced liability for drug interactions and may have potential improvements in tolerability over ritonavir. In addition, 3 has high aqueous solubility and can be readily coformulated with other agents.

Solubilizing excipients in oral and injectable formulations.

A review of commercially available oral and injectable solution formulations reveals that the solubilizing excipients include water-soluble organic solvents (polyethylene glycol 300, polyethylene glycol 400, ethanol, propylene glycol, glycerin, N-methyl-2-pyrrolidone, dimethylacetamide, and dimethylsulfoxide), non-ionic surfactants (Cremophor EL, Cremophor RH 40, Cremophor RH 60, d-alpha-tocopherol polyethylene glycol 1000 succinate, polysorbate 20, polysorbate 80, Solutol HS 15, sorbitan monooleate, poloxamer 407, Labrafil M-1944CS, Labrafil M-2125CS, Labrasol, Gellucire 44/14, Softigen 767, and mono- and di-fatty acid esters of PEG 300, 400, or 1750), water-insoluble lipids (castor oil, corn oil, cottonseed oil, olive oil, peanut oil, peppermint oil, safflower oil, sesame oil, soybean oil, hydrogenated vegetable oils, hydrogenated soybean oil, and medium-chain triglycerides of coconut oil and palm seed oil), organic liquids/semi-solids (beeswax, d-alpha-tocopherol, oleic acid, medium-chain mono- and diglycerides), various cyclodextrins (alpha-cyclodextrin, beta-cyclodextrin, hydroxypropyl-beta-cyclodextrin, and sulfobutylether-beta-cyclodextrin), and phospholipids (hydrogenated soy phosphatidylcholine, distearoylphosphatidylglycerol, L-alpha-dimyristoylphosphatidylcholine, L-alpha-dimyristoylphosphatidylglycerol). The chemical techniques to solubilize water-insoluble drugs for oral and injection administration include pH adjustment, cosolvents, complexation, microemulsions, self-emulsifying drug delivery systems, micelles, liposomes, and emulsions.