RESUMO
The quality assessment of the green coffee that you will go to buy cannot be disregarded from a sensory evaluation, although this practice is time consuming and requires a trained professional panel. This study aims to investigate both the potential and the limits of the direct headspace solid phase microextraction, mass spectrometry electronic nose technique (HS-SPME-MS or MS-EN) combined with chemometrics for use as an objective, diagnostic and high-throughput technique to be used as an analytical decision maker to predict the in-cup coffee sensory quality of incoming raw beans. The challenge of this study lies in the ability of the analytical approach to predict the sensory qualities of very different coffee types, as is usual in industry for the qualification and selection of incoming coffees. Coffees have been analysed using HS-SPME-MS and sensory analyses. The mass spectral fingerprints (MS-EN data) obtained were elaborated using: (i) unsupervised principal component analysis (PCA); (ii) supervised partial least square discriminant analysis (PLS-DA) to select the ions that are most related to the sensory notes investigated; and (iii) cross-validated partial least square regression (PLS), to predict the sensory attribute in new samples. The regression models were built with a training set of 150 coffee samples and an external test set of 34. The most reliable results were obtained with acid, bitter, spicy and aromatic intensity attributes. The mean error in the sensory-score predictions on the test set with the available data always fell within a limit of ±2. The results show that the combination of HS-SPME-MS fingerprints and chemometrics is an effective approach that can be used as a Total Analysis System (TAS) for the high-throughput definition of in-cup coffee sensory quality. Limitations in the method are found in the compromises that are accepted when applying a screening method, as opposed to human evaluation, in the sensory assessment of incoming raw material. The cost-benefit relationship of this and other screening instrumental approaches must be considered and weighed against the advantages of the potency of human response which could thus be better exploited in modulating blends for sensory experiences outside routine.
Assuntos
Café/química , Qualidade dos Alimentos , Espectrometria de Massas , Microextração em Fase Sólida , Compostos Orgânicos Voláteis/análise , Compostos Orgânicos Voláteis/isolamento & purificação , Técnicas Biossensoriais , Reprodutibilidade dos Testes , Microextração em Fase Sólida/métodos , Fluxo de TrabalhoRESUMO
Diterpenes are group of compounds of the terpenic fraction of roasted coffee and account for about 7-20 % (w/w) of the lipid fraction. Several parameters can influence their occurrence in coffee beans and beverages including species and post-harvest processing. Diterpenes in coffee have been studied extensively, but to the best of the authors' knowledge, there is no information in the literature on their stability over time. Coffee is a relatively stable product under optimal temperature, humidity and oxygen conditions. However, during storage it can undergo a series of chemical and physical reactions that alter its flavour and lead to rancidity, mainly due to the oxidative reactions that take place on the lipid fraction. In this study, the effect of long-term storage on the diterpene content of different commercial coffee blends and packaging is analysed and critically discussed. The Results show that the storage influences the internal environment of the capsules with an increase in moisture and a decrease in pH favouring more reactive conditions, especially for Eco capsules. Relative stability over time is observed for cafestol and kahweol. dehydro derivatives show a degradation up to T60 independently on the blends and packaging, which is not related to their precursors. The permeability of packaging and blends affect the modification of these components: while a drastic oxidation process takes place in Arabica eco compatible capsules (PC) when acidity and moisture increase, in Arabica/Robusta eco compatible capsules (IC) as well as in Arabica/Robusta and Arabica standard capsules (IS and PS) the peroxides tend to increase resulting in an autocatalytic propagation.
Assuntos
Coffea , Diterpenos , Alumínio , Coffea/química , Diterpenos/análise , Temperatura , Polímeros , LipídeosRESUMO
Acrylamide (AA) is a product of food heating process that is widely present in cooked foods and known to be toxic to humans. Exposure data has revealed coffee to be one of the sources of this toxicant in adult diets. A great deal of effort has been invested into finding ways of reducing AA formation during coffee processing. However, despite the accumulated knowledge and mitigation strategies applied so far, AA reduction in coffee is still a challenge compared to other heat-processed foods in which the wider raw-material selection and progress in technological processes and/or changes in the recipes are possible at the industrial level. This review presents a critical analysis of the accumulated knowledge on the formation of AA in coffee as well as on the mitigation strategies that have been investigated to date, with a focus on current applicability in industry and little explored topics.
Assuntos
Acrilamida , Café , Acrilamida/análise , Dieta , Contaminação de Alimentos/análise , Manipulação de Alimentos , Temperatura Alta , HumanosRESUMO
This study examines the volatilome of good and oxidised coffee samples from two commercial coffee species (i.e., Coffea arabica (arabica) and Coffea canephora (robusta)) in different packagings (i.e., standard with aluminium barrier and Eco-caps) to define a fingerprint potentially describing their oxidised note, independently of origin and packaging. The study was carried out using HS-SPME-GC-MS/FPD in conjunction with a machine learning data processing. PCA and PLS-DA were used to extrapolate 25 volatiles (out of 147) indicative of oxidised coffees, and their behaviour was compared with literature data and critically discussed. An increase in four volatiles was observed in all oxidised samples tested, albeit to varying degrees depending on the blend and packaging: acetic and propionic acids (pungent, acidic, rancid), 1-H-pyrrole-2-carboxaldehyde (musty), and 5-(hydroxymethyl)-dihydro-2(3H)-furanone.
RESUMO
Cocoa smoky off-flavour is generated from an inappropriate artificial drying applied on beans to speeding up the post-harvest process and it can affect the quality of the chocolate. The sensory tests are time-consuming, and at present, a fast analytical method to detect this defect in raw materials is not yet available. This study applies a HS-SPME-MS-enose in combination with chemometrics to obtain diagnostic mass-spectral patterns to detect smoked samples and/or as analytical decision maker. SIMCA models provide the best classification results, compared to PLS-DA, with sensitivities exceeding 90% and a high class specificity range of 89-100% depending on the matrix investigated (beans or liquors). Resulting diagnostic ions were related to phenolic derivatives. The discrimination ability of the method has been confirmed by a quantitative analysis through HS-SPME-GC-MS. HS-SPME-MS-enose turned out to be a fast, cost-effective and objective approach for high throughput analytical screening to discard defective cocoa samples.