Determination of Total Iodine in Infant Formula and Adult/ Pediatric Nutritional Formula by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS): Collaborative Study, Final Action 2012.15.

A collaborative study was conducted to determine total iodine in infant formula and adult/pediatric nutritional formula by inductively coupled plasma-MS (ICP-MS) using AOAC First Action Official Method(SM) 2012.15. The purpose of this study was to evaluate the method's intralaboratory and interlaboratory performance and submit the results to AOAC INTERNATIONAL for adoption as a Final Action Official Method for the determination of total iodine in infant formula and adult/pediatric nutritional formula. Upon providing acceptable results for practice samples National Institute of Standard and Technology (NIST) Standard Reference Material (SRM) 1849a and a low-fat adult nutritional powder, 13 laboratories analyzed seven various infant and adult nutritional products including a blind duplicate of each. Products were chosen with varying levels of iodine and included low-fat, soy-based, and milk-based formulas and NIST SRM 1849a. Random identification numbers were assigned to each of the seven fortified test materials. Digestion of the test samples occurred using a potassium hydroxide solution in an oven or open-vessel microwave system. Iodine was stabilized with ammonium hydroxide and sodium thiosulfate after digestion. The solutions were brought to volume followed by filtration. The filtrates were then analyzed by ICP-MS after dilution. Results for all seven test samples met all the AOAC Standard Method Performance Requirements (SMPR(®) 2012.008) guidelines. The RSDr ranged from 0.77 to 4.78% and the RSDR from 5.42 to 11.5%. The Horwitz ratio (HorRat) for each result was excellent, ranging from 0.35 to 1.31%. The results demonstrate that the method is fit-for-purpose to determine iodine in infant formula and adult/pediatric nutritional formula.

Evaluation Protocol for Review of Method Validation Data by the AOAC Stakeholder Panel on Infant Formula and Adult Nutritionals Expert Review Panel.

Methods under consideration as part of the AOAC Stakeholder Panel on Infant Formula and Adult Nutritionals process are to be evaluated against a set of Standard Method Performance RequirementsSM (SMPRs) via peer review by an expert review panel (ERP). A validation protocol and a checklist have been developed to assist the ERP to evaluate experimental data and to compare multiple candidate methods for each nutrient. Method performance against validation parameters mandated in the SMPRs as well as additional criteria are to be scored, with the method selected by the ERP proceeding to multilaboratory study prior to Final Action approval. These methods are intended to be used by the infant formula industry for the purposes of dispute resolution.

Analytical method for the determination of various arsenic species in rice, rice food products, apple juice, and other juices by ion chromatography-inductively coupled plasma/mass spectrometry.

Recent studies have shown that there are detectable levels of arsenic (As) in rice, rice food products, and apple juice. This has created significant concern to the public, the food industry, and various regulatory bodies. Classic test methods typically measure total As and are unable to differentiate the various As species. Since different As species have greatly different toxicities, an analytical method was needed to separate and quantify the different inorganic and organic species of As. The inorganic species arsenite [As(+3)] and arsenate [As(+5)] are highly toxic. With this in mind, an ion chromatography-inductively coupled plasma (IC-ICP/MS) method was developed and validated for rice and rice food products that can separate and individually measure multiple inorganic and organic species of As. This allows for the evaluation of the safety or risk associated with any product analyzed. The IC-ICP/MS method was validated on rice and rice food products, and it has been used successfully on apple juice. This paper provides details of the validated method as well as some lessons learned during its development. Precision and accuracy data are presented for rice, rice food products, and apple juice.

Determination of Aloin A, Aloin B, and Aloe-Emodin in Raw Materials and Finished Products Using HPLC Multi-Laboratory Validation Study, AOAC 2016.09, Final Action Status.

BACKGROUND: A multi-laboratory validation study was performed on AOAC Official Method of Analysis (OMA) 2016.09, for final action. Eight different laboratories throughout the world participated in the study tested the same set of 6 different laboratory samples of raw materials (commercial) and formulated products (commercial), and all the laboratories successfully generated results within the acceptance criteria. OBJECTIVE: The intention of the study was to evaluate specificity, precision (variation), linearity/range, system suitability, limit of detection (LOD), and limit of quantitation (LOQ) by multiple laboratories to satisfy the requirement of moving the OMA 2016.09 to the final action status. Accuracy and ruggedness were already validated in earlier work of single laboratory validation (1), and it was not necessary to include these validation parameters in the multi-laboratory validation study. METHOD: Laboratory samples containing Aloe were sent out to participating laboratories. Each lab followed AOAC 2016.09 (First Action status) to analyze contents of aloin A, aloin B, and aloe emodin using high performance liquid chromatography (HPLC) instrument. The results generated by each laboratory were collected and evaluated. RESULTS: The specificity results show that blank and matrix chromatograms do not contain major interfering peaks on the retention time of aloin A, aloin B, and aloe-emodin. The precision (variation) results of duplicated preparations are not more than 0.05 parts per million (ppm) different. The linearity/range results from six standards (10 parts per billion (ppb), 20 ppb, 40 ppb, 80 ppb, 160 ppb, and 500 ppb) have correlation coefficient (R) value of ≥ 0.999. The system suitability results meet the acceptance criteria to show the instrument validity. The limit of detection (LOD) results show that the signal-to-noise (S/N) ratio of 10 ppb standards for all three components are about 3. The limit of quantitation (LOQ) results show that the S/N ratio of 20 ppb standards for all three components are about 10. CONCLUSIONS: The validation parameters (specificity, precision (variation), linearity/range, system suitability, LOD, and LOQ) have been successfully analyzed, and it shows that the test method is suitable for its intended use. HIGHLIGHTS: The test method has been successfully validated by the eight different laboratories around the world (US, UK, Germany, and Canada). Each of the laboratory is managed independently by the site lab management team. This multi-lab study validated the method of Determination of Aloin A, Aloin B, and Aloe-Emodin in Raw Materials and Finished Products Using high performance liquid chromatography (HPLC), and the method fits for its intended purpose.

Method for the determination of total selenium in a wide variety of foods using inductively coupled plasma/mass spectrometry.

An optimized method for use in a high volume laboratory was developed and validated for the determination of total selenium in a wide variety of food products including infant formula. The method utilizes a single-stage, closed-vessel microwave digestion procedure with nitric acid. Upon completion of digestion, the solution is brought to volume with water. A dilution is prepared for analysis by adding methanol (MeOH) to an aliquot and then brought to volume by nitric acid diluent resulting in a 3% MeOH concentration. The amount of selenium is determined by inductively coupled plasma (ICP)/MS with the capability of removing argon-based polyatomic interferences. Experiments were conducted to validate the method by determining precision, accuracy, linearity, specificity, ruggedness, and robustness. The calculated practical reporting level for this method was 25.0 microg/kg. The method provided an average RSD of 2.03% during analysis of a wheat flour reference material and 2.73% during analysis of a powdered infant formula. The accuracy of the method for these materials was 98.6 and 105%, respectively. The method has also been used successfully on a variety of foods from various categories including fruits, grains, vegetables, protein, and dairy.

Determination of free and total myo-inositol in infant formula and adult/pediatric nutritional formula by high- performance anion exchange chromatography with pulsed amperometric detection, including a novel total extraction using microwave-assisted acid hydrolysis and enzymatic treatment: first action 2012.12.

After an assessment of data generated from a single-laboratory validation study published in J. AOAC Int. 95, 1469-1478 (2012), a method for determining total myo-inositol in infant formula and adult/ pediatric nutritional formula by high-performance anion exchange chromatography with pulsed amperometric detection (HPAEC-PAD), including extraction by using microwave-assisted acid hydrolysis and enzymatic treatment was presented for consideration by AOAC during the AOAC Annual Meeting held in Las Vegas, NV, from September 30 to October 3, 2012. The Expert Review Panel on Infant Formula and Adult Nutritionals concluded that the method met the criteria set by the standard method performance requirements (SMPRs) for the determination of free myo-inositol and approved the method as AOAC Official First Action. The method also determines total myo-inositol, but includes bound sources that the SMPRs exclude. The method involves using HPAEC-PAD for free myo-inositol and a total myo-inositol determination by two different techniques. The first technique uses the conventional acid hydrolysis with 6 h incubation in an autoclave. The second uses a microwave-assisted acid hydrolysis with enzymatic treatment that decreases the extraction time.

Determination of total iodine in foods and dietary supplements using inductively coupled plasma-mass spectrometry.

A method was developed and validated for the determination of total iodine in a wide variety of food products and dietary supplements. The method involves a unique sample digestion with a KOH solution in an oven or by using an open-vessel microwave system. After digestion, a stabilizer is added and the solution is taken to volume, then filtered and analyzed either directly or after dilution. The amount of iodine is determined with inductively coupled plasma-mass spectrometry (ICP-MS). The method was validated by experiments to determine its precision, accuracy, linearity, specificity, ruggedness, and robustness. The LOQ of this method is 25-50 microg/kg. The method demonstrated an average RSD of 2.27% during analysis of milk powder and 4.30% during analysis of a dietary supplement tablet reference material. The accuracy of the method as determined with these same reference materials was 100 and 94.2%, respectively. The method has been used successfully on commodity foods, processed foods, dairy products, pet food, infant formula, animal feed, mineral premixes, and a variety of dietary supplements.

Application of ultra-high-performance liquid chromatography/tandem mass spectrometry for the measurement of vitamin D in infant formula and adult/pediatric nutritional formula: First Action 2011.11.

In an effort to measure vitamin D, ultra-high-performance liquid chromatography with tandem mass spectrometry (UHPLC-MS/MS) was applied to samples. The use of UHPLC-MS/MS decreased the run time by 50%. The UHPLC-MS/MS achieved equal or better separation efficiency with complex food matrixes compared to HPLC-MS/MS. It was also observed that under the optimized conditions of UHPLC, all previtamins of vitamin D3, D2, and isotope-labeled vitamin D3 were baseline-separated from their corresponding vitamins. The sterol isomers found in complex food matrixes that interfere in the analysis were well separated from the analytes. The accuracy of the method was evaluated by analyzing National Institute of Standards and Technology Standard Reference Material 1849 infant reference material. The average vitamin D3 concentration was 0.251 +/- 0.012 microg/g. This showed excellent agreement with the certified value of 0.251 +/- 0.027 microg/g. The spike recovery study of a commercial infant formula matrix showed a range of recovery from 100 to 108%. The LOQ values determined were 0.0022 and 0.0028 microg/g for vitamins D3 and D2, respectively; LOD values were 0.00065 and 0.00083 microg/g for vitamins D3 and D2, respectively.

Analysis of free and total myo-inositol in foods, feeds, and infant formula by high-performance anion exchange chromatography with pulsed amperometric detection, including a novel total extraction using microwave-assisted acid hydrolysis and enzymatic treatment.

A method for the analysis of free and total myo-inositol in foods, feeds, and infant formulas has been developed and validated using high-performance anion exchange chromatography with pulsed amperometric detection. The option of a free myo-inositol determination or a complete total myo-inositol determination from main bound sources can be achieved. These sources include phytates, lower'phosphorylated forms, and phosphatidylinositol. This approach gives the option for subtraction of myo-inositol from nonbioavailable sources when it is quantified using other methods if a total bioavailable myo-inositol result is desired for nutritional labeling of a product. The free analysis was validated in a milk-based infant formula, giving RSD(R) of 2.29% and RSD, of 2.06%. A mean recovery of 97.9% was achieved from various spike levels of myo-inositol. Certified National Institute of Standards and Technology reference material verified the method's compatibility and specificity. Two different total analyses were validated in a soy-based infant formula and compared. One technique involved using a conventional acid hydrolysis with autoclave incubation for 6 h, while the other used a novel technique of microwave-assisted acid hydrolysis with enzymatic treatment that can minimize extraction to 1 day. The autoclave analysis had RSD(R) of 2.08% and RSDr of 1.55%, along with a mean spike recovery of 102.1% at various myo-inositol spike levels. The microwave/enzyme total analysis had RSD(R) of 4.34% and RSD, of 4.70%, along with a mean spike recovery of 104.2% at various spike levels of myo-inositol. Main sources of myo-inositol including phytic acid and phosphatidylinositol were tested with both total analyses. Mean recoveries of phytic acid and phosphatidylinositol through the autoclave total analysis were 90.4 and 98.3%, respectively. Mean spike recoveries for these same sources in soy- based infant formula through the microwave/enzyme total analysis were 97.2 and 96.3%, respectively. Comparison of soy-based infant formula and corn grain samples with high levels of these main sources showed in similar results, indicating both total analyses are acceptable for use. An additional glycerol kinase step was also developed to remove glycerol from the chromatographic elution window of myoinositol in samples with high levels of glycerol.

The Challenge of Measuring Sweet Taste in Food Ingredients and Products for Regulatory Compliance: A Scientific Opinion.

The Codex Alimentarius Commission, a central part of the joint Food and Agricultural Organization/World Health Organizations Food Standards Program, adopts internationally recognized standards, guidelines, and code of practices that help ensure safety, quality, and fairness of food trade globally. Although Codex standards are not regulations per se, regulatory authorities around the world may benchmark against these standards or introduce them into regulations within their countries. Recently, the Codex Committee on Nutrition and Foods for Special Dietary Uses (CCNFSDU) initiated a draft revision to the Codex standard for follow-up formula (FUF), a drink/product (with added nutrients) for young children, to include requirements for limiting or measuring the amount of sweet taste contributed by carbohydrates in a product. Stakeholders from multiple food and beverage manufacturers expressed concern about the subjectivity of sweetness and challenges with objective measurement for verifying regulatory compliance. It is a requirement that Codex standards include a reference to a suitable method of analysis for verifying compliance with the standard. In response, AOAC INTERNATIONAL formed the Ad Hoc Expert Panel on Sweetness in November 2020 to review human perception of sweet taste, assess the landscape of internationally recognized analytical and sensory methods for measuring sweet taste in food ingredients and products, deliver recommendations to Codex regarding verification of sweet taste requirements for FUF, and develop a scientific opinion on measuring sweet taste in food and beverage products beyond FUF. Findings showed an abundance of official analytical methods for determining quantities of carbohydrates and other sweet-tasting molecules in food products and beverages, but no analytical methods capable of determining sweet taste. Furthermore, sweet taste can be determined by standard sensory analysis methods. However, it is impossible to define a sensory intensity reference value for sweetness, making them unfit to verify regulatory compliance for the purpose of international food trade. Based on these findings and recommendations, the Codex Committee on Methods of Analysis and Sampling agreed during its 41st session in May 2021 to inform CCNFSDU that there are no known validated methods to measure sweetness of carbohydrate sources; therefore, no way to determine compliance for such a requirement for FUF.

Method for the direct determination of available carbohydrates in low-carbohydrate products using high-performance anion exchange chromatography.

An improved method for direct determination of available carbohydrates in low-level products has been developed and validated for a low-carbohydrate soy infant formula. The method involves modification of an existing direct determination method to improve specificity, accuracy, detection levels, and run times through a more extensive enzymatic digestion to capture all available (or potentially available) carbohydrates. The digestion hydrolyzes all common sugars, starch, and starch derivatives down to their monosaccharide components, glucose, fructose, and galactose, which are then quantitated by high-performance anion-exchange chromatography with photodiode array detection. Method validation consisted of specificity testing and 10 days of analyzing various spike levels of mixed sugars, maltodextrin, and corn starch. The overall RSD was 4.0% across all sample types, which contained within-day and day-to-day components of 3.6 and 3.4%, respectively. Overall average recovery was 99.4% (n = 10). Average recovery for individual spiked samples ranged from 94.1 to 106% (n = 10). It is expected that the method could be applied to a variety of low-carbohydrate foods and beverages.

Measurement of vitamin D in foods and nutritional supplements by liquid chromatography/tandem mass spectrometry.

Vitamin D is a fat-soluble vitamin with great nutritional interest. An HPLC/MS/MS method was developed to measure vitamin D with atmospheric pressure chemical ionization. Under the experimental parameters used, the LOQ was 0.018 IU/g or 0.45 ng/g, which greatly enhances the capability of measurement of vitamin D at low levels in foods and supplements. This method was validated with spike recovery of 100 +/- 15% and the RSD of less than 10% for most sample matrixes, including infant formula, cheese, cereal and cereal-based foods, multivitamin supplements, and pet foods. The results for vitamin D were compared with those obtained by other methods.

Measurement of water-soluble B vitamins in infant formula by liquid chromatography/tandem mass spectrometry.

A method has been developed for the simultaneous measurement of multiple B vitamins (i.e., B1, B2, B3, B5, and B6) in infant formulas by LC-MSIMS. The vitamins were extracted with acidic solvent, followed by protein precipitation at a pH range of 4.5 to 5.5, and filtered. This simplified procedure eliminates many of the potential sources of laboratory error and facilitates rapid and efficient analysis. As is common in most cases, isotope internal standards were added to account for variations in sample preparation, as well as changes in MS measurement. In this method, isotope-labeled internal standards of B1, B3, B5, and B6 were used. The factors affecting analytical performance were investigated and optimized. In addition, the stability of these vitamins in the extraction solution was investigated. An acidic condition (5 mM HCl) was applied to successfully stabilize B1, which had shown a decrease in signal when other solvents were used. The quantitative extraction and good stability allowed isotope standards to be added to the filtered sample solution, instead of to the extraction solvent. The addition of the isotope to the small portion of the filtered sample solution significantly reduces cost. A comprehensive evaluation of the analysis of the standard reference material and good spike recovery of the vitamins (100 +/- 6%) demonstrates the accuracy of the method. The results for commercially available infant formula samples were also compared with those obtained using the current microbiological method.

Proposed modifications to AOAC 996.06, optimizing the determination of trans fatty acids: presentation of data.

The increased focus on the accuracy of trans fatty acid data generated using current methodologies has resulted in research initiatives to optimize the quality of these assays. In this study, scientists combined the established methodology from AOAC 996.06 and the American Oil Chemists Society method Ce 1h-05, as well as other independent research. As a result, method modifications are proposed that could allow for a more accurate determination of trans fat than the current AOAC 996.06 method. Validation data from this study are presented. The authors encourage peer review and offer to facilitate a collaborative validation to update AOAC 996.06.

Determination of campesterol, stigmasterol, and beta-sitosterol in saw palmetto raw materials and dietary supplements by gas chromatography: collaborative study.

An interlaboratory study was conducted to evaluate a method for the determination of campesterol, stigmasterol, and beta-sitosterol in saw palmetto raw materials and dietary supplements at levels >1.00 mg/100 g based on a 2-3 g sample. Test samples were saponified at high temperature with ethanolic KOH solution. The unsaponifiable fraction containing phytosterols (campesterol, stigmasterol, and beta-sitosterol) was extracted with toluene. Phytosterols were derivatized to trimethylsilyl ethers and then quantified by gas chromatography with hydrogen flame ionization detection. Twelve blind duplicates, one of which was fortified, were successfully analyzed by 10 collaborators. Recoveries were obtained for the sample that was fortified. The results were 99.8, 111, and 111% for campesterol, stigmasterol, and beta-sitosterol, respectively. For repeatability, the relative standard deviation (RSDr) ranged from 3.93 to 17.3% for campesterol, 3.56 to 22.7% for stigmasterol, and 3.70 to 43.9% for beta-sitosterol. For reproducibility, the RSDR ranged from 7.97 to 22.6%, 0 to 26.7%, and 5.27 to 43.9% for campesterol, stigmasterol, and beta-sitosterol, respectively. Overall, the Study Director approved 5 materials with acceptable HorRat values for campesterol, stigmasterol, and beta-sitosterol ranging from 1.02 to 2.16.

Determination of aristolochic acid I in botanicals and dietary supplements potentially contaminated with aristolochic acid I using LC-UV with confirmation by LC/MS: collaborative study.

An interlaboratory study was conducted to evaluate a method for the determination of aristolochic acid I, also known as aristolochic acid A, at levels > 2.00 microg/g in botanical species and dietary supplements potentially contaminated with aristolochic acid I. Aristolochic acid I was extracted from various matrixes with aqueous acetonitrile. The amount of aristolochic acid I present was determined by liquid chromatography (LC) using an ultraviolet (UV) detector with confirmation by LC/mass spectrometry (MS). Thirteen blind duplicates were successfully analyzed by 10 collaborators, and aristolochic acid I was successfully confirmed in 1 blind duplicate by 8 collaborators. For repeatability, the relative standard deviation (RSD(r)) ranged from 1.72 to 16.3% and for reproducibility, the RSDR ranged from 5.42 to 19.8%. HorRat values were not applicable for 2 materials but varied from 0.7 to 1.8 for 11 materials. Each collaborating laboratory had calibration curves with correlation coefficients > 0.998. In addition, all of the collaborators that conducted the confirmation were able to verify the identity of aristolochic acid I using LC/MS/MS (using either ion trap or triple quad).

Determination of low-level agricultural residues in soft drinks and sports drinks by liquid chromatography/tandem mass spectrometry: single-laboratory validation.

In this study, sponsored by PepsiCo Inc., a method was validated for measurement of 11 pesticide residues in soft drinks and sports drinks. The pesticide residues determined in this validation were alachlor, atrazine, butachlor, isoproturon, malaoxon, monocrotophos, paraoxon-methyl, phorate, phorate sulfone, phorate sulfoxide, and 2,4-dichlorophenoxyacetic acid (2,4-D) when spiked at 0.100 microg/L (1.00 microg/L for phorate). Samples were filtered (if particulate matter was present), degassed (if carbonated), and analyzed using liquid chromatography with tandem mass spectrometry. Quantitation was performed with matrix-matched external standard calibration solutions. The standard curve range for this assay was 0.0750 to 10.0 microg/L. The calibration curves for all agricultural residues had coefficient of determination (r2) values greater than or equal to 0.9900 with the exception of 2 values that were 0.9285 and 0.8514. Fortification spikes at 0.100 microg/L (1.00 microg/L for phorate) over the course of 2 days (n=8 each day) for 3 matrixes (7UP, Gatorade, and Diet Pepsi) yielded average percent recoveries (and percent relative standard deviations) as follows (n=48): 94.4 (15.2) for alachlor, 98.2 (13.5) for atrazine, 83.1 (41.6) for butachlor, 89.6 (24.5) for isoproturon, 87.9 (24.4) for malaoxon, 96.1 (9.26) for monocrotophos, 101 (25.7) for paraoxon-methyl, 86.6 (20.4) for phorate, 101 (16.5) for phorate sulfone, 93.6 (25.5) for phorate sulfoxide, and 98.2 (6.02) for 2,4-D.

Determination of low-level agricultural residues in soft drinks and sports drinks by gas chromatography with mass-selective detection: single-laboratory validation.

In this study, sponsored by PepsiCo Inc., a method was validated for measurement of 19 pesticide residues in soft drinks and sports drinks by gas chromatography/mass spectrometry (GC/MS) with mass selective detection The pesticide residues determined in this validation were alpha-benzenehexachloride (BHC); beta-BHC; gamma-BHC; delta-BHC; methyl parathion; malathion; chlorpyrifos; aldrin; 2,4-dichlorodiphenyldichloroethylene (DDE); alpha-endosulfan; 4,4-DDE; 2,4-dichlorodiphenyldichloroethane (DDD); dieldrin; ethion; 4,4-DDD; 2,4-dichlorodiphenyltrichloroethylene (DDT); beta-endosulfan; 4,4-DDT; and endosulfan sulfate when spiked into a 200 mL matrix sample at 0.50 microg/L. The samples were diluted with acetonitrile and water, then liquid-liquid phase extracted into petroleum ether. The resulting extract was concentrated to near dryness and diluted with hexane:dichloromethane (50:50). The concentrated samples were purified by gel permeation chromatography. The resulting solution was concentrated and separated on a Florisil substrate. The eluent was concentrated to near dryness, reconstituted to produce a 200-fold concentration, and analyzed using a GC/MS instrument operated in the selective ion monitoring mode. The GC/MS instrument was equipped with a large volume injector capable of injecting 25 microL. External standards prepared in dichloromethane were used for quantification without the need for matrix-matched calibration because the extraction step minimized the matrix effects. The calibration curves for all agricultural residues had coefficients of determination (r2) of greater than or equal to 0.9900, with the exception of one value that was 0.988. Fortification spikes at 0.50 microg/L in 3 matrixes (7UP, Gatorade, and Diet Pepsi) over the course of 2 days (4 days for Gatorade), where n=8 each day, yielded average percent recoveries (and percent relative standard deviations) as follows (n=64): 95.6 (24.8) for alpha-BHC; 91.9 (23.6) for beta-BHC; 89.1 (21.3) for gamma-BHC; 91.7 (19.0) for delta-BHC; 96.2 (20.1) for methylparathion; 99.8 (26.5) for malathion; 120 (27.3) for chlorpyrifos; 103 (31.4) for aldrin; 111 (25.8) for 2,4-DDE; 116 (21.1) for alpha-endosulfan; 132 (34.6) for 4,4-DDE; 123 (34.4) for 2,4-DDD; 104 (20.8) for dieldrin; 141 (31.4) for ethion; 107 (24.5) for 4,4-DDD; 142 (29.2) for 2,4-DDT; 130 (35.9) for beta-endosulfan; 146 (25.3) for 4,4-DDT; and 91.5 (21.6) for endosulfansulfate.

Development and validation of analytical methods for dietary supplements.

The expanding use of innovative botanical ingredients in dietary supplements and foods has resulted in a flurry of research aimed at the development and validation of analytical methods for accurate measurement of active ingredients. The pressing need for these methods is being met through an expansive collaborative initiative involving industry, government, and analytical organizations. This effort has resulted in the validation of several important assays as well as important advances in the method engineering procedures which have improved the efficiency of the process. The initiative has also allowed researchers to hurdle many of the barricades that have hindered accurate analysis such as the lack of reference standards and comparative data. As the availability for nutraceutical products continues to increase these methods will provide consumers and regulators with the scientific information needed to assure safety and dependable labeling.