[Expression of saponin biosynthesis related genes in different tissues of Panax quinquefolius].

The relationship between saponin content of Panax quinquefolius in different parts of the organization and expression of ginsenoside biosynthesis related gene was obtained by the correlation analysis between saponin content and gene expression. The 14 tissue parts of P. quinquefolius were studied, six saponins in P. quinquefolius. Samples (ginsenoside Rg1, Re, Rb1, Rc, Rb2 and Rd), group saponins and total saponins were determined by high performance liquid chromatography and vanillin-sulfuric acid colorimetric method. Simultaneously, the expression levels of 7 ginsenoside biosynthesis related genes (SQS, OSC, DS, ß-AS, SQE, P450 and FPS) in different tissues of P. quinquefolius were determined by Real-time fluorescence quantitative PCR. Although 7 kinds of ginsenoside biosynthesis related enzyme gene in the P. quinquefolius involved in ginsenoside synthesis, the expression of ß-AS and P450 genes had no significant effect on the content of monosodium saponins, grouping saponins and total saponins, FPS, SQS, OSC, DS and SQE had significant or extremely significant on the contents of single saponins Re, Rg1, Rb1, Rd, group saponin PPD and PPT, total saponin TMS and total saponin TS (P<0.05 or P<0.01). The biosynthesis of partial saponins, grouping saponins and total saponins in P. quinquefolius was affected by the interaction of multiple enzyme genes in the saponin synthesis pathway, the content of saponins in different tissues of P. quinquefolius was determined by the differences in the expression of key enzymes in the biosynthetic pathway. Therefore, this study further clarified that FPS, SQS, OSC, DS and SQE was the key enzyme to control the synthesis of saponins in P. quinquefolius by correlation analysis, the biosynthesis of ginsenosides in P. quinquefolius was regulated by these five kind of enzymes in cluster co-expression of interaction mode.

[Research of genes expression related to ginsenosides biosynthesis by methyl jasmonic acid in ginseng hair roots].

In order to obtain the expression of ginsenoside biosynthetic pathway related enzyme gene in ginseng hairy root under the control of elicitors, methyl jasmonate (MeJA) was added exogenously as elicitors. Ginseng hairy root clones induced by 4-year-old ginseng root was used as material, total saponin content in ginseng hairy root before and after MeJA treatment was determined by vanillin-sulfuric acid colorimetry, Meanwhile, relative expression of squalene synthase genes, squalene epoxidase genes, oxidized squalene cyclase genes, dammarenediol synthase genes, ß-amyrin synthase genes, cycloartenol synthase genes before and after MeJA treatment were determined by Real-time PCR. The optimum conditions of MeJA which added to ginseng hairy root were obtained, the optimum additional concentration was 6×10⁻4 µmol•L⁻¹, the optimum additional time was 22 d, and the optimum action time was 5 d. The addition of MeJA could improve the enzymatic activity of peroxidase (PPD), catalase (CAT) and peroxidase (PPD) in ginseng hairy root. The expression of SQS，SQE，OSC，DS and ß-AS genes of ginsenoside biosynthetic pathway increased significantly after MeJA treatment, while the change of CAS gene expression were not significant. The expression of key enzyme SQS，SQE，OSC，DS and ß-AS genes in ginsenoside biosynthetic pathway was consistent with the changes of PPD，CAT，PPO enzymatic activity.

[Research achievements on ginsenosides biosynthesis from Panax ginseng].

Panax ginseng is one of the famous rare medicinal herbs, and ginsenosides are the main active ingredient of ginseng is ginsenoside.They can be divided into three chemotypes: oleanane type, protopanaxadiol (PPD) type and the protopanaxatriol (PPT)type. Ginsenosides possess anti-thrombotic, anti-fatigue, anti-aging, cancer control, strengthening the immune system and many other effects. Rrogress has remarkably been made in pharmacology, efficacy and blosynthesis of ginsenosides.This review covers the recent research achievements of ginsenasides, which would be helpful for the relevant researchers to get useful information.

[Correlation of gene expression related to amount of ginseng saponin in 15 tissues and 6 kinds of ginseng saponin biosynthesis].

Fifteen tissues of 4-year-old fruit repining stage Jilin ginseng were chosen as materials, six kinds of monomer saponins (ginsenosides Rg1, Re, Rb1, Rc, Rb2 and Rd) content in 15 tissues was measured by HPLC and vanillin-sulfuric acid method. The relative expression of FPS, SQS, SQE, OSC, ß-AS and P450 genes in 15 tissues was analyzed by real-time PCR. The correlations between ginseng saponin content in 15 tissues of Jilin ginseng and biosynthetic pathway -related genes were obtained. The results showed that was a synergistic increase and decrease trend of positive linear correlation among six kinds of monomer saponin content, and there was a significantly (P < 0.01) positive correlation between monomer saponin content and total saponins content. Monomer saponin content and 6 kinds of enzyme gene correlation were different. Biosynthesis of ginseng total saponins and monomer saponin were regulated by six kinds of participation ginsenoside biosynthesis enzyme genes, the expression of these six kinds of genes in different tissues of ginseng showed collaborative increase and decrease trend, and regulated biosynthesis of ginseng ginsenoside by group coordinative manner.

[Fermentation transformed ginsenoside by Lactobacillus plantarum].

OBJECTIVE: To explore ginseng fermentation process by Lactobacillus plantarum, and to make part of total saponins transformed into more reactive ginsenoside Rd. METHOD: Microbial fermentation was carried out by still dark culture. Total saponins were extracted by Soxhlet extraction, and determined by UV visible spectrophotometry with colours reaction by vanillin-sulfuric acid. Ginsenoside Rd was determined by HPLC method. RESULT: The fermentation process was: MRS medium, 35 degrees C, pH 5.0, cultured for 2 days. The content of total saponins was inhance 32%, and the content of ginsenoside Rd was increased 4.864 mg x g(-1). CONCLUSION: The fermentation system's process was reasonable, and it's suitable for mass production, important significance for ginsenoside microbial transformation.

Magnetic Properties and Microstructure of FePt(BN, X, C) (X = Ag, Re) Films.

A sputtered FePt(BN, Re, C) film, here boron nitride (BN), was compared to a reference sample FePt(BN, Ag, C). Intrinsically, these films illustrate a high anisotropy field (Hk) and perpendicular magnetocrystalline anisotropy (Ku),although the reference sample shows a higher value (Hk = 69.5 kOe, Ku = 1.74 × 107 erg/cm3) than the FePt(BN, Re, C) film (Hk = 66.9 kOe, Ku = 1.46 × 107 erg/cm3). However, the small difference in the anisotropy constant (K2/K1) ratio presents a close tendency in the angular dependence of the switching field. Extrinsically, the out-of-plane coercivity for the reference sample is 32 kOe, which is also higher than the FePt(BN, Re, C) film (Hc = 27 kOe), and both films present lower remanence (Mr(parallel)/Mr(perpendicular) = 0.08~0.12), that is, the index for perpendicular magnetic anisotropy. The higher perpendicular magnetization for both films was due to highly (001) textured FePt films, which was also evidenced by the tight rocking width of 4.1°/3.0° for (001)/(002) X-ray diffraction peaks, respectively, and high-enough ordering degree. The reference sample was measured to have a higher ordering degree (S = 0.84) than FePt(BN, Re, C) (S = 0.63). As a result, the Ag segregant shows stronger ability to promote the ordering of the FePt film; however, the FePt(BN, Re, C) film still has comparable magnetic properties without Ag doping. From the surface and elemental composition analysis, the metallic Re atoms found in the FePt lattice result in a strong spin-orbital coupling between transition metal Fe (3d electron) and heavy metals (Re, Pt) (5d electron) and we conducted high magnetocrystalline anisotropy (Ku). Above is the explanation that the lower-ordered FePt(BN, Re, C) film still has high-enough Ku and out-of-plane Hc. Regarding the microstructure, both the reference sample and FePt(BN, Re, C) show granular structure and columnar grains, and the respective average grain size and distributions are 6.60 nm (12.5%) and 11.2 nm (15.9%). The average widths of the grain boundaries and the aspect ratio of the columnar grain height are 2.05 nm, 1.00 nm, 2.35 nm, and 1.70 nm, respectively.

Comprehensive Analysis of Tumor Immune Microenvironment Characteristics for the Prognostic Prediction and Immunotherapy of Oral Squamous Cell Carcinoma.

Background: Oral squamous cell carcinoma (OSCC) is the most common cancer of oral and maxillofacial region. A recent clinical research has shown that tumor immune microenvironment (TIME)cells are closely related to immunotherapy sensitivity and OSCC prognosis. Nonetheless, a comprehensive analysis of TIME in OSCC has not been reported. Methods: Bioinformatics and computational algorithms were employed to determine the significance of TIME cells in 257 OSCC patients. TIME scores were measured by three TIME models, and then used to evaluate the prognosis of OSCC patients. Results: High TIME score was characterized by better prognosis in OSCC patients less than 60 years old, overexpression of immunotherapy targets (e.g., PD-1 and CLTA-4), and higher T-cell activity to inhibit tumor growth. Besides, poor prognosis was associated with low time score. Conclusion: TIME score exhibited potential as a prognostic biomarker and an indicator in predict immunotherapeutic outcomes. Through the understanding of TIME model, this study can provide a better scheme for immunotherapy as the effective treatment of OSCC patients in the future.

Switching Field Distribution in BN/FePtCAg/MgTiON and FePtCAg/MgTiOBN Films.

BN is the currently required segregant for perpendicular FePt media. We found that BN can be diffused from the MgTiOBN intermediate layer during a high temperature process. The FePtCAg film sputtered on MgTiOBN layers illustrates higher perpendicular magnetocrystalline anisotropy (Ku) (1.43 × 107 erg/cm3) and coercivity (normal to film surface) (17 kOe) at 350 K compared to BN/FePtCAg/MgTiON film. From the microstructure, the FePtCAg film shows the granular structure on the MgTiOBN intermediate layer, but parts of the irregular FePt grains are agglomerated and partially separated in the matrix, with grains size being, on average, 26.7 nm. Cross-sectional imaging showed that the FePt grains have a truncated pyramid shape with a lower wetting angle, which is influenced by the surface energy of MgTiOBN. BN segregation at FePt grains or boundaries is still not clear. Using the electron energy loss spectrum (EELS), we found that part of the BN atoms were clearly observed in the FePt lattice and iron-boride oxide was indexed in the x-ray photoelectron spectroscopy (XPS) spectra. To determine the effects of BN segregant (from capping layer or intermediate layer) on the magnetic switching behavior of FePtCAg film, the intrinsic-(ΔHint = 6.17 kOe, 6.54 kOe) and extrinsic- (ΔHext = 0.80 kOe, 0.39 kOe) switching field distribution (SFD) were measured by plotting saturated major- and unsaturated minor- hysteresis loops to evaluate the crystal orientation and microstructure (grains volume and distribution) for BN/FePtCAg/MgTiON and FePtCAg/MgTiOBN films, respectively. The main contribution of intrinsic SFD is the c-axis misalignment for the BN/FePt/MgTiON sample; however, the dispersed magnetic anisotropy has a higher input to intrinsic SFD for FePtCAg/MgTiOBN/CrRu film.