Human cytomegalovirus infection impairs neural differentiation via repressing sterol regulatory element binding protein 2-mediated cholesterol biosynthesis.

Congenital human cytomegalovirus (HCMV) infection is a major cause of abnormalities and disorders in the central nervous system (CNS) and/or the peripheral nervous system (PNS). However, the complete pathogenesis of neural differentiation disorders caused by HCMV infection remains to be fully elucidated. Stem cells from human exfoliated deciduous teeth (SHEDs) are mesenchymal stem cells (MSCs) with a high proliferation and neurogenic differentiation capacity. Since SHEDs originate from the neural crest of the early embryonic ectoderm, SHEDs were hypothesized to serve as a promising cell line for investigating the pathogenesis of neural differentiation disorders in the PNS caused by congenital HCMV infection. In this work, SHEDs were demonstrated to be fully permissive to HCMV infection and the virus was able to complete its life cycle in SHEDs. Under neurogenic inductive conditions, HCMV infection of SHEDs caused an abnormal neural morphology. The expression of stem/neural cell markers was also disturbed by HCMV infection. The impairment of neural differentiation was mainly due to a reduction of intracellular cholesterol levels caused by HCMV infection. Sterol regulatory element binding protein-2 (SREBP2) is a critical transcription regulator that guides cholesterol synthesis. HCMV infection was shown to hinder the migration of SREBP2 into nucleus and resulted in perinuclear aggregations of SREBP2 during neural differentiation. Our findings provide new insights into the prevention and treatment of nervous system diseases caused by congenital HCMV infection.

A triphenylamine-based carbohydrazide hydrazone fluorescent probe for selective detection of hypochlorite and sensing acidic gases.

Hypochlorous acid and its hypochlorite are important reactive oxygen species in the body, and are involved in various physiological processes related to immunity; their rapid detection is of great significance. Here, we synthesized a fluorescent probe (TPAS) by condensation of 4-(diphenylamino)benzaldehyde, carbohydrazide, and salicylaldehyde, which can be used for the detection of ClO- in water and sensing of acidic gas in its solid state. The probe showed strong selective recognition of ClO- in acetonitrile and good tolerance to interference ions. There were good linear responses between the intensity of absorbance and fluorescence and the amount of ClO-. The TPAS solid and its paper strips can emit red fluorescence when exposed to volatile acidic vapours. After being treated with NH3, the red fluorescence can be restored to yellow. The response process of TPAS to ClO- and acid gases was characterized using nuclear magnetic resonance, electrospray ionisation mass spectrometry, transmission electron microscopy, and density functional theory calculations. Furthermore, it can be utilized in analyzing ClO- in commercially available bleaching products; the detection results were basically compatible with the labelled values. In addition, the probe is biocompatible and can be applied for imaging ClO- in zebrafish.

Porous Organic Materials in Tissue Engineering: Recent Advances and Applications for Severed Facial Nerve Injury Repair.

The prevalence of facial nerve injury is substantial, and the restoration of its structure and function remains a significant challenge. Autologous nerve transplantation is a common treatment for severed facial nerve injury; however, it has great limitations. Therefore, there is an urgent need for clinical repair methods that can rival it. Tissue engineering nerve conduits are usually composed of scaffolds, cells and neurofactors. Tissue engineering is regarded as a promising method for facial nerve regeneration. Among different factors, the porous nerve conduit made of organic materials, which has high porosity and biocompatibility, plays an indispensable role. This review introduces facial nerve injury and the existing treatment methods and discusses the necessity of the application of porous nerve conduit. We focus on the application of porous organic polymer materials from production technology and material classification and summarize the necessity and research progress of these in repairing severed facial nerve injury, which is relatively rare in the existing articles. This review provides a theoretical basis for further research into and clinical interventions on facial nerve injury and has certain guiding significance for the development of new materials.

Reproduction of mode-locked pulses by spectrotemporal domain-informed deep learning.

The accurate reproduction of unique pulse states in a mode-locked fiber laser is an important scientific issue and has wide applications in the laser industry. We present what we believe to be a novel method for automatically and precisely reproducing targeted soliton states in a mode-locked fiber laser by spectrotemporal domain-informed deep learning. Targeted solitons are experimentally reproduced via a superior matching process with a spectrotemporal mean square error (MSE) of 3.99 × 10-5. The outstanding feature of our reproduction algorithm is that the pulse information in both the spectral and temporal domains is jointly adopted for reconstructing targeted soliton states from white noise, rather than establishing arbitrary mode-locked pulse states, as described in previous studies. Additionally, a single-layer perceptron model is proposed to retrieve the phase distribution of a mode-locked pulse, validating the physical completeness of our reproduction approach. Our approach advances ultrafast laser technology, enabling the precise control of pulse dynamics in applications such as optical communication and nonlinear optics.

Buildup of multiple spatiotemporal nonlinear dynamics in an all-fiber multimode laser.

Ultrafast lasers based on multimode fibers have attracted extensive attention owing to the large mode-field area and nonlinear tolerance. The high spatial degree of freedom of multimode fibers is significant for spatiotemporal pulses locked both in transverse and longitudinal modes, where the energy of output pulses can be remarkably improved. Herein, the 1.5-µm all-fiber spatiotemporal mode-locked laser was realized based on carbon nanotubes as a saturable absorber. Moreover, by tuning the polarization controller and the pump power carefully, the output wavelengths can be ranged from 1529 to 1565 nm based on the multimode interference filter. In addition, Q-switched mode-locking and spatiotemporal mode-locked dual combs were also observed by further adjusting the polarization controller. Such a kind of an all-fiber multimode laser offers a crucial insight into the spatiotemporal nonlinear dynamics, which is of great significance in scientific research and practical applications.

Symmetry-Driven Assembly of a Penta-Shell Keplerate Cuprofullerene for Metallofullerene Frameworks.

Two metallofullerene frameworks (MFFs) constructed from a penta-shell Keplerate cuprofullerene chloride, C60 @Cu24 @Cl44 @Cu12 @Cl12 , have been successfully prepared via a C60 -templated symmetry-driven strategy. The icosahedral cuprofullerene chloride is assembled on a C60 molecule through [η2 -(C=C)]-CuI and CuI -Cl coordination bonds, resulting in the penta-shell Keplerate with the C60 core canopied by 24 Cu, 44 Cl, 12 Cu and 12 Cl atoms that fulfill the tic@rco@oae@ico@ico penta-shell polyhedral configuration. By sharing the outmost-shell Cl atoms, the cuprofullerene chlorides are connected into 2D or 3D (snf net) frameworks. TD-DFT calculations reveal that the charge transfer from the outmost CuI and Cl to C60 core is responsible for their light absorption expansion to near-infrared region, implying anionic halogenation may be an effective strategy to tune the light absorption properties of metallofullerene materials.

Mimicking DNA Periodic Docking Grooves for Adaptive Identification of l-/d-Tryptophan in a Biological Metal-Organic Framework.

Bioinspired metal-organic frameworks (MOFs) serve as suitable crystalline models for recognition and sensing of biomolecules mimicking natural processes, providing new ideas and concepts for cutting-edge biomedical applications. Here, we have successfully prepared a robust biological metal-organic framework with periodic docking grooves resembling the major and minor grooves in the DNA double helix structure, which can be used as unique recognition sites for selectively identifying l-/d-tryptophan (l-/d-Trp). Notably, successful encapsulation of Trp could be observed by single-crystal X-ray diffraction for the first time. Trp has matched size and shape to fit snugly into the major groove. Combined with isothermal titration calorimetry, it was found that ZnBTCHx could spontaneously capture l-/d-Trp through two different thermodynamic pathways: enthalpy-driven for encapsulating l-Trp and entropy-driven for uptaking d-Trp. Furthermore, molecular dynamics and density functional theory verified the role of hydrogen bonding and π-π/C-H···π interactions in the host-guest interface. This work provides unique insight for the construction of bionic models to mimic the natural binding properties, which is of great significance for the fields of pharmaceutical chemistry and biomedical science.

MXenes: Synthesis, Optical Properties, and Applications in Ultrafast Photonics.

Recently, 2D materials are in great demand for various applications such as optical devices, supercapacitors, sensors, and biomedicine. MXenes as a kind of novel 2D material have attracted considerable research interest due to their outstanding mechanical, thermal, electrical, and optical properties. Especially, the excellent nonlinear optical response enables them to be potential candidates for the applications in ultrafast photonics. Here, a review of MXenes synthesis, optical properties, and applications in ultrafast lasers is presented. First, aqueous acid etching and chemical vapor deposition methods for preparing MXenes are introduced, in which the storage stability and challenges of the existing synthesis techniques are also discussed. Then, the optical properties of MXenes are discussed specifically, including plasmonic properties, optical detection, photothermal effects, and ultrafast dynamics. Furthermore, the typical ultrafast pulsed lasers enabled by MXene-based saturable absorbers operated at different wavelength regions are summarized. Finally, a summary and outlook on the development of MXenes is presented in the perspectives section.

BHBA treatment improves cognitive function by targeting pleiotropic mechanisms in transgenic mouse model of Alzheimer's disease.

Accumulation of amyloid ß (Aß) peptide, inflammation, and oxidative stress contribute to Alzheimer's disease (AD) and trigger complex pathogenesis. The ketone body ß-hydroxybutyrate (BHBA) is an endogenous metabolic intermediate that protects against stroke and neurodegenerative diseases, but the underlying mechanisms are unclear. The present study aims to elucidate the protective effects of BHBA in the early stage of AD model and investigate the underlying molecular mechanisms. Three-and-half-month-old double-transgenic mice (5XFAD) overexpressing ß-amyloid precursor protein (APP) and presenilin-1 (PS1) were used as the AD model. The 5XFAD mice received 1.5 mmol/kg/d BHBA subcutaneously for 28 days. Morris water maze test, nest construction, and passive avoidance experiments were performed to assess the therapeutic effects on AD prevention in vivo, and brain pathology of 5XFAD mice including amyloid plaque deposition and microglia activation were assessed. Gene expression profiles in the cortexes of 5XFAD- and BHBA-treated 5XFAD mice were performed with high-throughput sequencing and bioinformatic analysis. Mouse HT22 cells were treated with 2 mM BHBA to explore its in vitro protective effects of BHBA on hippocampal neurons against Aß oligomer toxicity, ATP production, ROS generation, and mitochondrial aerobic respiratory function. APP, BACE1, and neprilysin (NEP) expression levels were evaluated in HT22 cells following treatment with BHBA by measuring the presence or absence of G protein-coupled receptor 109A (GPR109A). BHBA improved cognitive function of 5XFAD mice in Morris water maze test, nesting construction and passive avoidance experiments, and attenuated Aß accumulation and microglia overactivation in the brain. BHBA also enhanced mitochondrial respiratory function of hippocampal neurons and protected it from Aß toxicity. The enzymes, APP and NEP were regulated by BHBA via G-protein-coupled receptor 109A (GPR109A). Furthermore, RNA sequencing revealed that BHBA-regulated genes mainly annotated in aging, immune system, nervous system, and neurodegenerative diseases. Our data suggested that BHBA confers protection against the AD-like pathological events in the AD mouse model by targeting multiple aspects of AD and it may become a promising candidate for the prevention and treatment of AD.

MXenes: synthesis, incorporation, and applications in ultrafast lasers.

The rapid expansion of nanotechnology and material science prompts two-dimensional (2D) materials to be extensively used in biomedicine, optoelectronic devices, and ultrafast photonics. Owing to the broadband operation, ultrafast recovery time, and saturable absorption properties, 2D materials become the promising candidates for being saturable absorbers in ultrafast pulsed lasers. In recent years, the novel 2D MXene materials have occupied the forefront due to their superior optical and electronic, as well as mechanical and chemical properties. Herein, we introduce the fabrication methods of MXenes, incorporation methods of combining 2D materials with laser cavities, and applications of ultrafast pulsed lasers based on MXenes. Firstly, top-down and bottom-up approaches are two types of fabrication methods, where top-down way mainly contains acid etching and the chief way of bottom-up method is chemical vapor deposition. In addition to these two typical ones, other methods are also discussed. Then we summarize the advantages and drawbacks of these approaches. Besides, commonly used incorporation methods, such as sandwich structure, optical deposition, as well as coupling with D-shaped, tapered, and photonic crystal fibers are reviewed. We also discuss their merits, defects, and conditions of selecting different methods. Moreover, we introduce the state of the art of ultrafast pulsed lasers based on MXenes at different wavelengths and highlight some excellent output performance. Ultimately, the outlook for improving fabrication methods and applications of MXene-based ultrafast lasers is presented.

Sodium Butyrate Protects N2a Cells against Aß Toxicity In Vitro.

Alzheimer's disease (AD) is a common neurodegenerative disease. Aß plays an important role in the pathogenesis of AD. Sodium butyrate (NaB) is a short-chain fatty acid salt that exerts neuroprotective effects such as anti-inflammatory, antioxidant, antiapoptotic, and cognitive improvement in central nervous system diseases. The aim of this study is to research the protective effects of NaB on neurons against Aß toxicity and to uncover the underlying mechanisms. The results showed that 2 mM NaB had a significant improvement effect on Aß-induced N2a cell injury, by increasing cell viability and reducing ROS to reduce injury. In addition, by acting on the GPR109A receptor, NaB regulates the expression of AD-related genes such as APP, NEP, and BDNF. Therefore, NaB protects N2a cells from Aß-induced cell damage through activating GPR109A, which provides an innovative idea for the treatment of AD.

Development of Model Predictive Controller for a Tail-Sitter VTOL UAV in Hover Flight.

This paper presents a model predictive controller (MPC) for position control of a vertical take-off and landing (VTOL) tail-sitter unmanned aerial vehicle (UAV) in hover flight. A 'cross' configuration quad-rotor tail-sitter UAV is designed with the capabilities for both hover and high efficiency level flight. The six-degree-of-freedom (DOF) nonlinear dynamic model of the UAV is built based on aerodynamic data obtained from wind tunnel experiments. The model predictive position controller is then developed with the augmented linearized state-space model. Measured and unmeasured disturbance model are introduced into the modeling and optimization process to improve disturbance rejection ability. The MPC controller is first verified and tuned in the hardware-in-loop (HIL) simulation environment and then implemented in an on-board flight computer for real-time indoor experiments. The simulation and experimental results show that the proposed MPC position controller has good trajectory tracking performance and robust position holding capability under the conditions of prevailing and gusty winds.

A Camera-Based Target Detection and Positioning UAV System for Search and Rescue (SAR) Purposes.

Wilderness search and rescue entails performing a wide-range of work in complex environments and large regions. Given the concerns inherent in large regions due to limited rescue distribution, unmanned aerial vehicle (UAV)-based frameworks are a promising platform for providing aerial imaging. In recent years, technological advances in areas such as micro-technology, sensors and navigation have influenced the various applications of UAVs. In this study, an all-in-one camera-based target detection and positioning system is developed and integrated into a fully autonomous fixed-wing UAV. The system presented in this paper is capable of on-board, real-time target identification, post-target identification and location and aerial image collection for further mapping applications. Its performance is examined using several simulated search and rescue missions, and the test results demonstrate its reliability and efficiency.

Development and Testing of a Two-UAV Communication Relay System.

In the development of beyond-line-of-sight (BLOS) Unmanned Aerial Vehicle (UAV) systems, communication between the UAVs and the ground control station (GCS) is of critical importance. The commonly used economical wireless modules are restricted by the short communication range and are easily blocked by obstacles. The use of a communication relay system provides a practical way to solve these problems, improving the performance of UAV communication in BLOS and cross-obstacle operations. In this study, a communication relay system, in which a quadrotor was used to relay radio communication for another quadrotor was developed and tested. First, the UAVs used as the airborne platform were constructed, and the hardware for the communication relay system was selected and built up. Second, a set of software programs and protocol for autonomous mission control, communication relay control, and ground control were developed. Finally, the system was fully integrated into the airborne platform and tested both indoor and in-flight. The Received Signal Strength Indication (RSSI) and noise value in two typical application scenarios were recorded. The test results demonstrated the ability of this system to extend the communication range and build communication over obstacles. This system also shows the feasibility to coordinate multiple UAVs' communication with the same relay structure.

Guided-mode-resonance-enhanced measurement of thin-film absorption.

We present a numerical and experimental study of a guided-mode-resonance (GMR) device for detecting surface-bound light-absorbing thin films. The GMR device functions as an optical resonator at the wavelength strongly absorbed by the thin film. The GMR mode produces an evanescent field that results in enhanced optical absorption by the thin film. For a 100-nm-thick lossy thin film, the GMR device enhances its absorption coefficients over 26 × compared to a conventional glass substrate. Simulations show the clear quenching effect of the GMR when the extinction coefficient is greater than 0.01. At the resonant wavelength, the reflectance of the GMR surface correlates well with the degree of optical absorption. GMR devices are fabricated on a glass substrate using a surface-relief grating and a titanium-dioxide coating. To analyze a visible absorbing dye, the reflection coefficient of dye-coated GMR devices was measured. The GMR-based method was also applied to detecting acid gases, such as hydrochloric vapor, by monitoring the change in absorption in a thin film composed of a pH indicator, bromocresol green. This technique potentially allows absorption analysis in the visible and infrared ranges using inexpensive equipment.

Ag/MXene as Saturable Absorber for Tm:Ho Co-Doped Q-Switched Fiber Laser.

Q-switched fiber lasers have become reliable light sources for generating high-energy pulses, which can be passively modulated by saturable absorbers with excellent nonlinear optical properties. The composite combining Ag and MXene exhibits a broadband nonlinear response and high modulation depth, making it a promising candidate for saturable absorbers in pulsed lasers. Herein, we demonstrate a Q-switched Tm:Ho co-doped fiber laser centered at 2 µm, where the Ag/MXene composite serves as a saturable absorber to generate pulses. The typical spectrum, pulse train, and radio frequency spectrum of Q-switched pulses were observed, in which the 60 dB signal-to-noise ratio was higher than that of 2 µm Q-switched fiber lasers based on other materials, demonstrating the stability of the output pulses. Additionally, the long-term stability of the laser was evaluated over 2 h, where the well-maintained central wavelength and output power also indicated the robustness of the Q-switched laser. Furthermore, the influence of the pump power on the parameters of Q-switched pulses was also investigated, which is conducive to control the output characteristics of lasers. Specifically, the pulse width of the Q-switched pulse decreased, while the repetition rate, output power, and single pulse energy all increased with the increase in pump power. These experimental results demonstrate the ability of Ag/MXene as a saturable absorber and show its potential for generating high-performance pulses in ultrafast lasers.

Prevalence and relevant factors of depression among adolescents in Xinjiang, China: A cross-sectional survey.

The aim of this study is to elucidate the prevalence of depression and examine the contributing factors to depression among adolescents in Xinjiang, China. A stratified cluster sampling methodology was employed in this study, with the sample size determined through consideration of prior studies on adolescent depression. Employing this approach, 6 schools were chosen from each prefecture-level city, designated as urban areas, and 3 schools were selected from each county. Subsequently, individual classes were treated as units, and a minimum of 80 students from each grade were surveyed within the entire class. The investigation of adolescents involved the administration of a questionnaire assessing the factors influencing depression, along with the Center for Epidemiologic Studies Depression Scale (CES-D). Multivariate linear regression was used to analyze the influencing factors of depression. The occurrence rates of depression were 12.17%, 13.05%, 12.32%, and 9.29% in junior middle school, senior middle school, vocational high school, and college, respectively. The corresponding CES-D scores were 10.54 ±â€…8.26, 11.20 ±â€…8.37, 12.17 ±â€…6.94, and 11.33 ±â€…6.28. Significant associations with the CES-D score were observed for gender, smoking, alcohol consumption, and spending more than 4 hours online daily across the educational levels mentioned. The risk of experiencing depressive symptoms was elevated among female junior and senior high school students who spent more than 4 hours daily on the internet, engaged in cigarette smoking, and consumed alcohol. The findings underscore the significance of targeting high-risk groups, particularly through home-school collaborations, to mitigate excessive internet use and consequently reduce the likelihood of depressive symptoms in students.

Strong, Tough, and Biocompatible Poly(vinyl alcohol)-Poly(vinylpyrrolidone) Multiscale Network Hydrogels Reinforced by Aramid Nanofibers.

Poly(vinyl alcohol) (PVA) hydrogels are water-rich, three-dimensional (3D) network materials that are similar to the tissue structure of living organisms. This feature gives hydrogels a wide range of potential applications, including drug delivery systems, articular cartilage regeneration, and tissue engineering. Due to the large amount of water contained in hydrogels, achieving hydrogels with comprehensive properties remains a major challenge, especially for isotropic hydrogels. This study innovatively prepares a multiscale-reinforced PVA hydrogel from molecular-level coupling to nanoscale enhancement by chemically cross-linking poly(vinylpyrrolidone) (PVP) and in situ assembled aromatic polyamide nanofibers (ANFs). The optimized ANFs-PVA-PVP (APP) hydrogels have a tensile strength of ≈9.7 MPa, an elongation at break of ≈585%, a toughness of ≈31.84 MJ/m3, a compressive strength of ≈10.6 MPa, and a high-water content of ≈80%. It is excellent among all reported PVA hydrogels and even comparable to some anisotropic hydrogels. System characterizations show that those performances are attributed to the particular multiscale load-bearing structure and multiple interactions between ANFs and PVA. Moreover, APP hydrogels exhibit excellent biocompatibility and a low friction coefficient (≈0.4). These valuable performances pave the way for broad potential in many advanced applications such as biological tissue replacement, flexible wearable devices, electronic skin, and in vivo sensors.

Three-Pillar Expansive Craniotomy in Children with Acute Ruptured Supratentorial Brain Arteriovenous Malformations.

OBJECTIVE: Acute rupture and hemorrhage of pediatric brain arteriovenous malformations (AVMs) may lead to cerebral herniation or intractable intracranial hypertension, necessitating emerging surgical interventions to alleviate intracranial pressure. However, there is still controversy regarding the timing of treatment for ruptured AVMs. This study aimed to assess the feasibility of utilizing three-pillar expansive craniotomy (3PEC) at different times during the treatment of pediatric ruptured supratentorial AVMs. METHODS: A retrospective analysis was conducted on all consecutive cases of acute rupture in supratentorial AVM children who underwent 3PEC at a single institution from 2020 to 2022. General information, clinical characteristics, radiological data, and prognosis were reviewed and analyzed. RESULTS: Thirteen children were included in the analysis. The intracranial pressure of all patients decreased to below 15 mmHg within 10 days. The expansion volume of the cranial cavity of the patients increased by 18.3 cm3 (95% confidence interval, 10.2-26.3; P < 0.001) compared to the hematoma volume. None of the patients required decompressive craniectomy due to intractable intracranial hypertension caused by cerebral swelling. The median waiting period for patients with delayed AVMs treatment was 8 days, during which no rebleeding occurred. CONCLUSIONS: Emergency intervention with 3PEC in children experiencing acutely ruptured supratentorial AVMs appears to be feasible. For children requiring delayed management of the AVMs, 3PEC may diminish the risk of rebleeding during the waiting period and shorten the waiting period.

Graphene/ chitosan tubes inoculated with dental pulp stem cells promotes repair of facial nerve injury.

Introduction: Facial nerve injury significantly impacts both the physical and psychological] wellbeing of patients. Despite advancements, there are still limitations associated with autografts transplantation. Consequently, there is an urgent need for effective artificial grafts to address these limitations and repair injuries. Recent years have witnessed the recognition of the beneficial effects of chitosan (CS) and graphene in the realm of nerve repair. Dental pulp stem cells (DPSCs) hold great promise due to their high proliferative and multi-directional differentiation capabilities. Methods: In this study, Graphene/CS (G/CST) composite tubes were synthesized and their physical, chemical and biological properties were evaluated, then DPSCs were employed as seed cells and G/CST as a scaffold to investigate their combined effect on promoting facial nerve injury repair. Results and Disscussion: The experimental results indicate that G/CST possesses favorable physical and chemical properties, along with good cyto-compatibility. making it suitable for repairing facial nerve transection injuries. Furthermore, the synergistic application of G/CST and DPSCs significantly enhanced the repair process for a 10 mm facial nerve defect in rabbits, highlighting the efficacy of graphene as a reinforcement material and DPSCs as a functional material in facial nerve injury repair. This approach offers an effective treatment strategy and introduces a novel concept for clinically managing facial nerve injuries.