Characterization of the Edge States in Colloidal Bi2Se3 Platelets.

The remarkable development of colloidal nanocrystals with controlled dimensions and surface chemistry has resulted in vast optoelectronic applications. But can they also form a platform for quantum materials, in which electronic coherence is key? Here, we use colloidal, two-dimensional Bi2Se3 crystals, with precise and uniform thickness and finite lateral dimensions in the 100 nm range, to study the evolution of a topological insulator from three to two dimensions. For a thickness of 4-6 quintuple layers, scanning tunneling spectroscopy shows an 8 nm wide, nonscattering state encircling the platelet. We discuss the nature of this edge state with a low-energy continuum model and ab initio GW-Tight Binding theory. Our results also provide an indication of the maximum density of such states on a device.

Electronic properties of atomically coherent square PbSe nanocrystal superlattice resolved by Scanning Tunneling Spectroscopy.

Rock-salt lead selenide nanocrystals can be used as building blocks for large scale square superlattices via two-dimensional assembly of nanocrystals at a liquid-air interface followed by oriented attachment. Here we report Scanning Tunneling Spectroscopy measurements of the local density of states of an atomically coherent superlattice with square geometry made from PbSe nanocrystals. Controlled annealing of the sample permits the imaging of a clean structure and to reproducibly probe the band gap and the valence hole and conduction electron states. The measured band gap and peak positions are compared to the results of optical spectroscopy and atomistic tight-binding calculations of the square superlattice band structure. In spite of the crystalline connections between nanocrystals that induce significant electronic couplings, the electronic structure of the superlattices remains very strongly influenced by the effects of disorder and variability.

Charge-Induced Structural Changes in a Single Molecule Investigated by Atomic Force Microscopy.

Intramolecular structural relaxations occurring upon electron transfer are crucial in determining the rate of redox reactions. Here, we demonstrate that subangstrom structural changes occurring upon single-electron charging can be quantified by means of atomically resolved atomic force microscopy (AFM) for the case of single copper(II)phthalocyanine (CuPc) molecules deposited on an ultrathin NaCl film. Imaging the molecule in distinct charge states (neutral and anionic) reveals characteristic differences in the AFM contrast. In comparison to density functional theory simulations these changes in contrast can be directly related to relaxations of the molecule's geometric structure upon charging. The dominant contribution arises from a nonhomogeneous vertical relaxation of the molecule, caused by a change in the electrostatic interaction with the surface.

Scanning probe microscopy and spectroscopy of colloidal semiconductor nanocrystals and assembled structures.

Colloidal semiconductor nanocrystals become increasingly important in materials science and technology, due to their optoelectronic properties that are tunable by size. The measurement and understanding of their energy levels is key to scientific and technological progress. Here we review how the confined electronic orbitals and related energy levels of individual semiconductor quantum dots have been measured by means of scanning tunneling microscopy and spectroscopy. These techniques were originally developed for flat conducting surfaces, but they have been adapted to investigate the atomic and electronic structure of semiconductor quantum dots. We compare the results obtained on colloidal quantum dots with those on comparable solid-state ones. We also compare the results obtained with scanning tunneling spectroscopy with those of optical spectroscopy. The first three sections provide an introduction to colloidal quantum dots, and a theoretical basis to be able to understand tunneling spectroscopy on dots attached to a conducting surface. In sections 4 and 5 , we review the work performed on lead-chalcogenide nanocrystals and on colloidal quantum dots and rods of II-VI compounds, respectively. In section 6 , we deal with colloidal III-V nanocrystals and compare the results with their self-assembled counter parts. In section 7 , we review the work on other types of semiconductor quantum dots, especially on Si and Ge nanocrystals.

Submolecular Resolution Imaging of Molecules by Atomic Force Microscopy: The Influence of the Electrostatic Force.

The forces governing the contrast in submolecular resolution imaging of molecules with atomic force microscopy (AFM) have recently become a topic of intense debate. Here, we show that the electrostatic force is essential to understand the contrast in atomically resolved AFM images of polar molecules. Specifically, we image strongly polarized molecules with negatively and positively charged tips. A contrast inversion is observed above the polar groups. By taking into account the electrostatic forces between tip and molecule, the observed contrast differences can be reproduced using a molecular mechanics model. In addition, we analyze the height dependence of the various force components contributing to the high-resolution AFM contrast.

Aryl Radical Geometry Determines Nanographene Formation on Au(111).

The Ullmann coupling has been used extensively as a synthetic tool for the formation of C-C bonds on surfaces. Thus far, most syntheses made use of aryl bromides or aryl iodides. We investigated the applicability of an aryl chloride in the bottom-up assembly of graphene nanoribbons. Specifically, the reactions of 10,10'-dichloro-9,9'-bianthryl (DCBA) on Au(111) were studied. Using atomic resolution non-contact AFM, the structure of various coupling products and intermediates were resolved, allowing us to reveal the important role of the geometry of the intermediate aryl radicals in the formation mechanism. For the aryl chloride, cyclodehydrogenation occurs before dehalogenation and polymerization. Due to their geometry, the planar bisanthene radicals display a different coupling behavior compared to the staggered bianthryl radicals formed when aryl bromides are used. This results in oligo- and polybisanthenes with predominantly fluoranthene-type connections.

Intermolecular contrast in atomic force microscopy images without intermolecular bonds.

Intermolecular features in atomic force microscopy images of organic molecules have been ascribed to intermolecular bonds. A recent theoretical study [P. Hapala et al., Phys. Rev. B 90, 085421 (2014)] showed that these features can also be explained by the flexibility of molecule-terminated tips. We probe this effect by carrying out atomic force microscopy experiments on a model system that contains regions where intermolecular bonds should and should not exist between close-by molecules. Intermolecular features are observed in both regions, demonstrating that intermolecular contrast cannot be directly interpreted as intermolecular bonds.

Nanoscale chemical imaging of a working catalyst by scanning transmission X-ray microscopy.

The modern chemical industry uses heterogeneous catalysts in almost every production process. They commonly consist of nanometre-size active components (typically metals or metal oxides) dispersed on a high-surface-area solid support, with performance depending on the catalysts' nanometre-size features and on interactions involving the active components, the support and the reactant and product molecules. To gain insight into the mechanisms of heterogeneous catalysts, which could guide the design of improved or novel catalysts, it is thus necessary to have a detailed characterization of the physicochemical composition of heterogeneous catalysts in their working state at the nanometre scale. Scanning probe microscopy methods have been used to study inorganic catalyst phases at subnanometre resolution, but detailed chemical information of the materials in their working state is often difficult to obtain. By contrast, optical microspectroscopic approaches offer much flexibility for in situ chemical characterization; however, this comes at the expense of limited spatial resolution. A recent development promising high spatial resolution and chemical characterization capabilities is scanning transmission X-ray microscopy, which has been used in a proof-of-principle study to characterize a solid catalyst. Here we show that when adapting a nanoreactor specially designed for high-resolution electron microscopy, scanning transmission X-ray microscopy can be used at atmospheric pressure and up to 350 degrees C to monitor in situ phase changes in a complex iron-based Fisher-Tropsch catalyst and the nature and location of carbon species produced. We expect that our system, which is capable of operating up to 500 degrees C, will open new opportunities for nanometre-resolution imaging of a range of important chemical processes taking place on solids in gaseous or liquid environments.

Formation and characterization of a molecule-metal-molecule bridge in real space.

Metal-organic complexes were formed by means of inelastic excitations in a scanning tunneling microscope (STM). The electronic structure of the complex was characterized using STM imaging and spectroscopy. By exploiting the symmetry of the complex, its electronic structure can be rationalized from linear combinations of molecular orbitals. The actual bonding geometry, which cannot be inferred from STM alone, was determined from atomic force microscopy images with atomic resolution. Our study demonstrates that the combination of these techniques enables a direct quantification of the interplay of geometry and electronic coupling in metal-organic complexes in real space.

Symmetry dependence of vibration-assisted tunneling.

We present spatially resolved vibronic spectroscopy of individual pentacene molecules in a double-barrier tunneling junction. It is observed that even for this effective single-level system the energy dissipation associated with electron attachment varies spatially by more than a factor of 2. This is in contrast to the usual treatment of electron-vibron coupling in the Franck-Condon picture. Our experiments unambiguously prove that the local symmetry of initial and final wave function determines the dissipation in electron transport.

Controlled lateral manipulation of molecules on insulating films by STM.

On metallic and semiconductor surfaces functional nanostructures can be built with atomic scale precision using the tip of an atomic force microscope/scanning tunneling microscope. In contrast, controlled lateral manipulation on insulators has not been reported. The traditional pushing and pulling based manipulation methods cannot be used for molecules adsorbed on insulating films because of the unfavorable ratio between diffusion barrier and desorption energy. Here, we demonstrate that molecules adsorbed on insulating films can be laterally manipulated in a controlled way by injecting inelastically tunneling electrons at well-defined positions in a molecule. The technique was successfully applied to several different molecules.

Charge state control of molecules reveals modification of the tunneling barrier with intramolecular contrast.

From scanning tunneling microscopy and spectroscopy experiments it is shown that control over the charge-state of individual molecules adsorbed on surfaces can be obtained by choosing a substrate system with an appropriate workfunction. The distribution of the additional charge is studied using difference images. These images show marked intramolecular contrast.

Electronic Quantum Materials Simulated with Artificial Model Lattices.

The band structure and electronic properties of a material are defined by the sort of elements, the atomic registry in the crystal, the dimensions, the presence of spin-orbit coupling, and the electronic interactions. In natural crystals, the interplay of these factors is difficult to unravel, since it is usually not possible to vary one of these factors in an independent way, keeping the others constant. In other words, a complete understanding of complex electronic materials remains challenging to date. The geometry of two- and one-dimensional crystals can be mimicked in artificial lattices. Moreover, geometries that do not exist in nature can be created for the sake of further insight. Such engineered artificial lattices can be better controlled and fine-tuned than natural crystals. This makes it easier to vary the lattice geometry, dimensions, spin-orbit coupling, and interactions independently from each other. Thus, engineering and characterization of artificial lattices can provide unique insights. In this Review, we focus on artificial lattices that are built atom-by-atom on atomically flat metals, using atomic manipulation in a scanning tunneling microscope. Cryogenic scanning tunneling microscopy allows for consecutive creation, microscopic characterization, and band-structure analysis by tunneling spectroscopy, amounting in the analogue quantum simulation of a given lattice type. We first review the physical elements of this method. We then discuss the creation and characterization of artificial atoms and molecules. For the lattices, we review works on honeycomb and Lieb lattices and lattices that result in crystalline topological insulators, such as the Kekulé and "breathing" kagome lattice. Geometric but nonperiodic structures such as electronic quasi-crystals and fractals are discussed as well. Finally, we consider the option to transfer the knowledge gained back to real materials, engineered by geometric patterning of semiconductor quantum wells.

Quantitative atomic force microscopy with carbon monoxide terminated tips.

Noncontact atomic force microscopy (AFM) has recently progressed tremendously in achieving atomic resolution imaging through the use of small oscillation amplitudes and well-defined modification of the tip apex. In particular, it has been shown that picking up simple inorganic molecules (such as CO) by the AFM tip leads to a well-defined tip apex and to enhanced image resolution. Here, we use the same approach to study the three-dimensional intermolecular interaction potential between two molecules and focus on the implications of using molecule-modified AFM tips for microscopy and force spectroscopy experiments. The flexibility of the CO at the tip apex complicates the measurement of the intermolecular interaction energy between two CO molecules. Our work establishes the physical limits of measuring intermolecular interactions with scanning probes.

Molecular symmetry governs surface diffusion.

In chemistry and physics symmetry principles are all important, for example, leading to the selection rules governing optical transitions. We have investigated the influence of the molecular symmetry on the surface potential landscape of molecules in the limit of weak molecule-substrate binding. For this purpose, the induced lateral motion of Cu(II)-tetraazaphthalocyanine molecules, for which four symmetry distinct isomers exist, on NaCl(100) was studied by scanning tunneling microscopy. This nonthermal diffusion induced by inelastic excitations is found to be qualitatively different for all four symmetry distinct isomers, demonstrating that symmetry governs the surface potential landscape.

Hole-induced electron transport through core-shell quantum dots: a direct measurement of the electron-hole interaction.

Quantum dots (QDs) have promising optoelectronic properties. Colloidal QD heterostructures, systems in which two semiconductors are incorporated in a single colloid, may show novel and potentially useful transport phenomena. Here, we report on the physical mechanisms of charge transport through PbSe-CdSe core-shell QDs measured with cryogenic scanning tunneling spectroscopy. Compared to single-component QDs, an additional hole-induced electron tunneling channel is found. Electron tunneling with and without a hole occurs at different bias, allowing the determination of the electron-hole interaction energy (80 meV). This energy is sufficiently large to allow for a transport regime at room temperature in which electrons tunnel into the dot only if a hole is present, an ideal situation for controlled single-photon emission.

Single-molecule synthesis and characterization of metal-ligand complexes by low-temperature STM.

We present scanning tunneling microscopy (STM)-based single-molecule synthesis of linear metal-ligand complexes starting from individual metal atoms (iron or nickel) and organic molecules (9,10-dicyanoanthracene) deposited on an ultrathin insulating film. We directly visualize the frontier molecular orbitals by STM orbital imaging, from which, in conjunction with detailed density functional theory calculations, the electronic structure of the complexes is inferred. Our studies show how the order of the molecular orbitals and the spin-state of the complex can be engineered through the choice of the metal atom. The high-spin iron complex has a singly occupied delocalized orbital with a large spin-splitting that points to the use of these engineered complexes as modular building blocks in molecular spintronics.

p Orbital Flat Band and Dirac Cone in the Electronic Honeycomb Lattice.

Theory anticipates that the in-plane px, py orbitals in a honeycomb lattice lead to potentially useful quantum electronic phases. So far, p orbital bands were only realized for cold atoms in optical lattices and for light and exciton-polaritons in photonic crystals. For electrons, in-plane p orbital physics is difficult to access since natural electronic honeycomb lattices, such as graphene and silicene, show strong s-p hybridization. Here, we report on electronic honeycomb lattices prepared on a Cu(111) surface in a scanning tunneling microscope that, by design, show (nearly) pure orbital bands, including the p orbital flat band and Dirac cone.

Nanoscale chemical imaging of the reduction behavior of a single catalyst particle.

A closer look: Investigation of the reduction properties of a single Fischer-Tropsch catalyst particle, using in situ scanning transmission X-ray microscopy with spatial resolution of 35 nm, reveals a heterogeneous distribution of Fe(0), Fe(2+), and Fe(3+) species. Regions of different reduction properties are defined and explained on the basis of local chemical interactions and catalyst morphology.

One Precursor but Two Types of Graphene Nanoribbons: On-Surface Transformations of 10,10'-Dichloro-9,9'-bianthryl on Ag(111).

On-surface synthesis has emerged in the last decade as a method to create graphene nanoribbons (GNRs) with atomic precision. The underlying premise of this bottom-up strategy is that precursor molecules undergo a well-defined sequence of inter- and intramolecular reactions, leading to the formation of a single product. As such, the structure of the GNR is encoded in the precursors. However, recent examples have shown that not only the molecule, but also the coinage metal surface on which the reaction takes place, plays a decisive role in dictating the nanoribbon structure. In this work, we use scanning probe microscopy and X-ray photoelectron spectroscopy to investigate the behavior of 10,10'-dichloro-9,9'-bianthryl (DCBA) on Ag(111). Our study shows that Ag(111) can induce the formation of both seven-atom wide armchair GNRs (7-acGNRs) and 3,1-chiral GNRs (3,1-cGNRs), demonstrating that a single molecule on a single surface can react to different nanoribbon products. We additionally show that coadsorbed dibromoperylene can promote surface-assisted dehydrogenative coupling in DCBA, leading to the exclusive formation of 3,1-cGNRs.