Self-powered ultra-flexible electronics via nano-grating-patterned organic photovoltaics.

Next-generation biomedical devices1-9 will need to be self-powered and conformable to human skin or other tissue. Such devices would enable the accurate and continuous detection of physiological signals without the need for an external power supply or bulky connecting wires. Self-powering functionality could be provided by flexible photovoltaics that can adhere to moveable and complex three-dimensional biological tissues1-4 and skin5-9. Ultra-flexible organic power sources10-13 that can be wrapped around an object have proven mechanical and thermal stability in long-term operation13, making them potentially useful in human-compatible electronics. However, the integration of these power sources with functional electric devices including sensors has not yet been demonstrated because of their unstable output power under mechanical deformation and angular change. Also, it will be necessary to minimize high-temperature and energy-intensive processes10,12 when fabricating an integrated power source and sensor, because such processes can damage the active material of the functional device and deform the few-micrometre-thick polymeric substrates. Here we realize self-powered ultra-flexible electronic devices that can measure biometric signals with very high signal-to-noise ratios when applied to skin or other tissue. We integrated organic electrochemical transistors used as sensors with organic photovoltaic power sources on a one-micrometre-thick ultra-flexible substrate. A high-throughput room-temperature moulding process was used to form nano-grating morphologies (with a periodicity of 760 nanometres) on the charge transporting layers. This substantially increased the efficiency of the organophotovoltaics, giving a high power-conversion efficiency that reached 10.5 per cent and resulted in a high power-per-weight value of 11.46 watts per gram. The organic electrochemical transistors exhibited a transconductance of 0.8 millisiemens and fast responsivity above one kilohertz under physiological conditions, which resulted in a maximum signal-to-noise ratio of 40.02 decibels for cardiac signal detection. Our findings offer a general platform for next-generation self-powered electronics.

Impact of Narrowing Density of States in Semiconducting Polymers on Performance of Organic Field-Effect Transistors.

To improve the performance of organic field-effect transistors (OFETs) employing π-conjugated polymers, a basic understanding of the relationships between the material properties and device characteristics is crucial. Although the density of states (DOS) distribution is one of the essential material properties of semiconducting polymers, insights into how the DOS shape affects the mobility (µ), subthreshold swing (S), and contact resistance (RC ) in OFETs remain lacking. In this study, by combining sensitive DOS measurements and multilayered OFET structures, it is experimentally demonstrated that narrower DOS widths in the polymer channels lead to higher µ, smaller S, and lower RC . By contrast, variation of the DOS in the bulk layer does not affect the performance. These results demonstrate a direct relationship between the polymer properties and OFET performance and highlight the importance of controlling the DOS width in π-conjugated polymers.

Highly efficient organic photovoltaics with enhanced stability through the formation of doping-induced stable interfaces.

Flexible organic photovoltaics (OPVs) are promising power sources for wearable electronics. However, it is challenging to simultaneously achieve high efficiency as well as good stability under various stresses. Herein, we demonstrate the fabrication of highly efficient (efficiency, 13.2%) and stable OPVs based on nonfullerene blends by a single-step postannealing treatment. The device performance decreases dramatically after annealing at 90 °C and is fully recovered after annealing at 150 °C. Glass-encapsulated annealed OPVs show good environmental stability with 4.8% loss in efficiency after 4,736 h and an estimated T 80 lifetime (80% of the initial power conversion efficiency) of over 20,750 h in the dark under ambient condition and T 80 lifetime of 1,050 h at 85 °C and 30% relative humidity. This environmental stability is enabled by the synergetic effect of the stable morphology of donor/acceptor blends and thermally stabilized interfaces due to doping. Furthermore, the high efficiency and good stability are almost 100% retained in ultraflexible OPVs and minimodules which are mechanically robust and have long-term operation capability and thus are promising for future self-powered and wearable electronics.

Noncentrosymmetric Columnar Liquid Crystals with the Bulk Photovoltaic Effect for Organic Photodetectors.

The bulk photovoltaic effect (BPVE) has drawn intensive attention due to its unique features that cannot be accessed with the conventional photovoltaic effect. However, the BPVE is observed in noncentrosymmetric materials and has been studied mainly for inorganic materials. Here, we report a simple subphthalocyanine (SubPc) derivative that assembles into a noncentrosymmetric columnar liquid crystal with the help of a DC E-field. These columnar assemblies exhibit the BPVE over a wide range of wavelengths up to 650 nm. Furthermore, just by sandwiching this columnar assembly between two ITO electrodes, the resultant device reaches a light-on/off ratio, Ilight/Idark, as high as 6.6 × 103, indicating that the polar columnar assemblies with SubPcs are promising for photodetectors.

Immobilization of Ethynyl-π-Extended Electron Acceptors with Amino-Terminated SAMs by Catalyst-Free Click Reaction.

Surface modification of SiO2 using a catalyst-free quantitative reaction between an amine and an ethynyl-π-extended naphthalenediimide was investigated. A post-reaction method, in which the catalyst-free reaction was performed at the surface after the formation of amino-terminated self-assembled monolayers (SAMs), resulted in dense, uniform modification of the SiO2 surface with the naphthalenediimide molecules. Both X-ray reflectivity and angle-resolved X-ray photoemission spectroscopy showed consistent results for the layer thickness and density. In contrast, a pre-reaction method, in which an amino-silane and the ethynyl-π-extended naphthalenediimide reacted first and then formed a SAM, afforded a sparse SAM on the SiO2 surface, probably due to the steric hindrance of the naphthalenediimide moieties. The in situ decoration of the SiO2 surface by a catalyst-free quantitative reaction offers a facile route for modifying surface properties with various π-conjugated molecules suitable for many applications.

Intermolecular Arrangement of Fullerene Acceptors Proximal to Semiconducting Polymers in Mixed Bulk Heterojunctions.

Precise control of the molecular arrangements at the interface between the electron donor and acceptor in mixed bulk heterojunctions (BHJs) remains challenging, despite the correlation between structural characteristics and efficiency in organic photovoltaics (OPVs). This study reveals that the substitution patterns of linear and branched alkyl side chains on electron-donating/-accepting alternating copolymers can control the positions of an acceptor molecule (C60 ) around the π-conjugated main chains in mixed BHJs. Two-dimensional solid-state NMR demonstrates a marked difference in the location of C60 in the blend films. A copolymer with an electron-accepting unit positioned in close proximity to C60 demonstrated higher OPV performance in combination with various fullerene derivatives. This molecular design offers precise control over the interfacial molecular structure, thereby paving the way for overcoming the current limitations of OPVs comprising mixed BHJs.

Surface functionalization of organic semiconductor films by segregated monolayers.

Fullerene-based surfactants with semifluoroalkyl chains bearing one of five different functional groups at the end were synthesized and used for the facile surface modification of organic semiconductor films. Surface analysis showed that the modifiers were segregated and the functional groups were exposed at the surface.

Organic Photovoltaic Stability: Understanding the Role of Engineering Exciton and Charge Carrier Dynamics from Recent Progress.

Benefiting from the synergistic development of material design, device engineering, and the mechanistic understanding of device physics, the certified power conversion efficiencies (PCEs) of single-junction non-fullerene organic solar cells (OSCs) have already reached a very high value of exceeding 19%. However, in addition to PCEs, the poor stability is now a challenging obstacle for commercial applications of organic photovoltaics (OPVs). Herein, recent progress made in exploring operational mechanisms, anomalous photoelectric behaviors, and improving long-term stability in non-fullerene OSCs are highlighted from a novel and previously largely undiscussed perspective of engineering exciton and charge carrier pathways. Considering the intrinsic connection among multiple temporal-scale photocarrier dynamics, multi-length scale morphologies, and photovoltaic performance in OPVs, this review delineates and establishes a comprehensive and in-depth property-function relationship for evaluating the actual device stability. Moreover, this review has also provided some valuable photophysical insights into employing the advanced characterization techniques such as transient absorption spectroscopy and time-resolved fluorescence imagings. Finally, some of the remaining major challenges related to this topic are proposed toward the further advances of enhancing long-term operational stability in non-fullerene OSCs.

Waterproof and ultraflexible organic photovoltaics with improved interface adhesion.

Ultraflexible organic photovoltaics have emerged as a potential power source for wearable electronics owing to their stretchability and lightweight nature. However, waterproofing ultraflexible organic photovoltaics without compromising mechanical flexibility and conformability remains challenging. Here, we demonstrate waterproof and ultraflexible organic photovoltaics through the in-situ growth of a hole-transporting layer to strengthen interface adhesion between the active layer and anode. Specifically, a silver electrode is deposited directly on top of the active layers, followed by thermal annealing treatment. Compared with conventional sequentially-deposited hole-transporting layers, the in-situ grown hole-transporting layer exhibits higher thermodynamic adhesion between the active layers, resulting in better waterproofness. The fabricated 3 µm-thick organic photovoltaics retain 89% and 96% of their pristine performance after immersion in water for 4 h and 300 stretching/releasing cycles at 30% strain under water, respectively. Moreover, the ultraflexible devices withstand a machine-washing test with such a thin encapsulation layer, which has never been reported. Finally, we demonstrate the universality of the strategy for achieving waterproof solar cells.

Intrinsically stretchable organic photovoltaics by redistributing strain to PEDOT:PSS with enhanced stretchability and interfacial adhesion.

Intrinsically stretchable organic photovoltaics have emerged as a prominent candidate for the next-generation wearable power generators regarding their structural design flexibility, omnidirectional stretchability, and in-plane deformability. However, formulating strategies to fabricate intrinsically stretchable organic photovoltaics that exhibit mechanical robustness under both repetitive strain cycles and high tensile strains remains challenging. Herein, we demonstrate high-performance intrinsically stretchable organic photovoltaics with an initial power conversion efficiency of 14.2%, exceptional stretchability (80% of the initial power conversion efficiency maintained at 52% tensile strain), and cyclic mechanical durability (95% of the initial power conversion efficiency retained after 100 strain cycles at 10%). The stretchability is primarily realised by delocalising and redistributing the strain in the active layer to a highly stretchable PEDOT:PSS electrode developed with a straightforward incorporation of ION E, which simultaneously enhances the stretchability of PEDOT:PSS itself and meanwhile reinforces the interfacial adhesion with the polyurethane substrate. Both enhancements are pivotal factors ensuring the excellent mechanical durability of the PEDOT:PSS electrode, which further effectively delays the crack initiation and propagation in the top active layer, and enables the limited performance degradation under high tensile strains and repetitive strain cycles.

End-on orientation of semiconducting polymers in thin films induced by surface segregation of fluoroalkyl chains.

Controlling the orientation of highly anisotropic structures of polymers is important because the majority of their mechanical, electronic, and optical properties depend on the orientation of the polymer backbone. In thin films, the polymer chains tend to adopt an orientation parallel to the substrate; therefore, forcing the chains to stand perpendicular to the substrate is challenging. We have developed a simple way to achieve this end-on orientation. We functionalized one end of a poly(3-butylthiophene) (P3BT) chain with a 1H,1H,2H,2H,3H,3H-perfluoroundecyl group, which caused spontaneous self-segregation of the polymer (P3BT-F17) to the surface of the polymer film. In P3BT-F17/polystyrene (PS) blend films, a highly ordered end-on orientation of the conjugated backbone was observed in the surface-segregated layer of the crystalline P3BT-F17. Furthermore, when the film was spin-coated from a mixture of P3BT-F17 and P3BT, the chain orientation of P3BT-F17 at the surface forced the P3BT in the bulk of the film to adopt the end-on orientation because of the high crystallinity of P3BT. The electronic conductivity measured perpendicular to the film surface also reflected the end-on orientation in the bulk, resulting in a more than 30-fold enhancement of the hole mobility.

Hybrid solution-processed bulk heterojunction solar cells based on bismuth sulfide nanocrystals.

High efficiency organic and hybrid solar cells create demand for novel electron acceptor materials that possess appropriate energetic band levels and bandgap for efficient solar energy harnessing. We present hybrid bulk heterojunction devices based on P3HT and bismuth sulfide nanocrystals, a semiconductor based on environmentally friendly compounds, with a power conversion efficiency of 1% and NIR sensitization at 700 nm of 30%, among the highest ever reported for P3HT.

Dependence of Exciton Binding Energy on Bandgap of Organic Semiconductors.

Strongly bound excitons crucially affect the operation of organic optoelectronic devices. Nevertheless, precise experimental data on the exciton binding energy of organic semiconductors are lacking. In this study, we determine the exciton binding energy as the difference between the optical and transport bandgaps with a precision of 0.1 eV. In particular, electron affinities with a precision higher than 0.05 eV determined by low-energy inverse photoelectron spectroscopy allow us to determine the transport gap and the exciton binding energies with such high precision. Through a systematic comparison of a wide range of organic semiconductors, including 42 organic solar cell materials (15 nonfullerene acceptors, 4 fullerene acceptors, 13 low-bandgap polymers, 7 organic light-emitting diode materials, and 3 crystalline materials), we found that the exciton binding energy is one-quarter of the transport gap regardless of the materials. We interpret this unexpected relation from a hydrogen atom-like model, i.e., the quantized energy levels in a Coulomb potential between the positive and the negative charges.

Synthesis of 2,5,8-Tris(1-phenyl-1H-benzo[d]imidazol-2-yl)benzo[1,2-b:3,4-b':5,6-b″] Trithiophenes and Their Spontaneous Orientation Polarization in Thin Films.

To investigate the relationship between molecular structures and spontaneous orientation polarization (SOP) in organic thin films, 2,5,8-tris(1-phenyl-1H-benzo[d]imidazol-2-yl)benzo[1,2-b:3,4-b':5,6-b″] trithiophene (TPBTT) and its ethyl derivative (m-ethyl-TPBTT) were synthesized. Variable angle spectroscopic ellipsometry and two-dimensional grazing-incidence wide-angle X-ray scattering showed that the vacuum-deposited films of TPBTT and m-ethyl-TPBTT had a higher degree of molecular orientation parallel to the substrate compared with that of prototypical 2,2',2″-(1,3,5-benzinetriyl)-tris(1-phenyl-1-H-benzimidazole) (TPBi) due to the larger π-conjugated benzotrithiophene core. However, TPBTT films showed a lower SOP of +54.4 mV/nm than did the TPBi film (+77.3 mV/nm), indicating that the molecular orientation alone did not determine the SOP. In contrast, m-ethyl-TPBTT showed a larger SOP of +104.0 mV/nm in the film. Quantum chemical calculations based on density functional theory suggested that the differences in the stable molecular conformation and the permanent dipole moments between TPBTT and m-ethyl-TPBTT caused the differences in SOP. These results suggest that the simultaneous control of the orientational order and conformation of the molecules is important to achieving a large SOP in films.

Tin Halide Perovskite Solar Cells with Open-Circuit Voltages Approaching the Shockley-Queisser Limit.

The power conversion efficiency of tin-based halide perovskite solar cells is limited by large photovoltage losses arising from the significant energy-level offset between the perovskite and the conventional electron transport material, fullerene C60. The fullerene derivative indene-C60 bisadduct (ICBA) is a promising alternative to mitigate this drawback, owing to its superior energy level matching with most tin-based perovskites. However, the less finely controlled energy disorder of the ICBA films leads to the extension of its band tails that limits the photovoltage of the resultant devices and reduces the power conversion efficiency. Herein, we fabricate ICBA films with improved morphology and electrical properties by optimizing the choice of solvent and the annealing temperature. Energy disorder in the ICBA films is substantially reduced, as evidenced by the 22 meV smaller width of the electronic density of states. The resulting solar cells show open-circuit voltages of up to 1.01 V, one of the highest values reported so far for tin-based devices. Combined with surface passivation, this strategy enabled solar cells with efficiencies of up to 11.57%. Our work highlights the importance of controlling the properties of the electron transport material toward the development of efficient lead-free perovskite solar cells and demonstrates the potential of solvent engineering for efficient device processing.

Synthesis of 3,3'-dihydroxy-2,2'-diindan-1,1'-dione derivatives for tautomeric organic semiconductors exhibiting intramolecular double proton transfer.

To investigate potential applications of the 3,3'-dihydroxy-2,2'-biindan-1,1'-dione (BIT) structure as an organic semiconductor with intramolecular hydrogen bonds, a new synthetic route under mild conditions is developed based on the addition reaction of 1,3-dione to ninhydrin and the subsequent hydrogenation of the hydroxyl group. This route affords several new BIT derivatives, including asymmetrically substituted structures that are difficult to access by conventional high-temperature synthesis. The BIT derivatives exhibit rapid tautomerization by intramolecular double proton transfer in solution. The tautomerizations are also observed in the solid state by variable temperature measurements of X-ray diffractometry and magic angle spinning 13C solid-state NMR. Possible interplay between the double proton transfer and the charge transport is suggested by quantum chemical calculations. The monoalkylated BIT derivative with a lamellar packing structure suitable for lateral charge transport in films shows a hole mobility of up to 0.012 cm2 V-1 s-1 with a weak temperature dependence in an organic field effect transistor.

Synergistic Surface Modification of Tin-Lead Perovskite Solar Cells.

Interfaces in thin-film photovoltaics play a pivotal role in determining device efficiency and longevity. In this work, the top surface treatment of mixed tin-lead (≈1.26 eV) halide perovskite films for p-i-n solar cells is studied. Charge extraction is promoted by treating the perovskite surface with piperazine. This compound reacts with the organic cations at the perovskite surface, modifying the surface structure and tuning the interfacial energy level alignment. In addition, the combined treatment with C60 pyrrolidine tris-acid (CPTA) reduces hysteresis and leads to efficiencies up to 22.7%, with open-circuit voltage values reaching 0.90 V, ≈92% of the radiative limit for the bandgap of this material. The modified cells also show superior stability, with unencapsulated cells retaining 96% of their initial efficiency after >2000 h of storage in N2 and encapsulated cells retaining 90% efficiency after >450 h of storage in air. Intriguingly, CPTA preferentially binds to Sn2+ sites at film surface over Pb2+ due to the energetically favored exposure of the former, according to first-principles calculations. This work provides new insights into the surface chemistry of perovskite films in terms of their structural, electronic, and defect characteristics and this knowledge is used to fabricate state-of-the-art solar cells.

Tailoring organic heterojunction interfaces in bilayer polymer photovoltaic devices.

In an ideal model, a p-n junction is formed by two stacked slabs of semiconductors. Although the construction of actual devices is generally more complex, we show that such a simple method can in fact be applied to the formation of organic heterojunctions. Two films of the organic semiconductors poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C(61)-butyric acid methyl ester (PCBM) can be connected by a simple film-transfer method without disturbing their flat surfaces. Each film can further be modified with a surface-segregated monolayer to tune the strength and direction of the surface dipole moment. Using this method, we fabricated bilayer organic photovoltaic devices with interfacial dipole moments that were selected to align the energy levels at the heterojunction. The open-circuit voltages of the P3HT/PCBM devices could be tuned over a wide range between 0.3 and 0.95 V, indicating that, even if the same combination of bulk materials is used, the interfacial properties drastically alter the performance of organic photovoltaic devices.

Effects of block length in copolymers based on regioregular oligothiophenes linked with electron-accepting units.

Copolymers with an alternating structure of regioregular oligo(3-hexylthiophene) (O3HT) with different lengths and 2,5-dibutyl-3,6-di(thiophen-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,5H)-dione (DPP) were synthesized through Stille coupling reaction. The light absorption of the copolymers can be rationally tuned to have a broad spectrum across the visible region by adjusting the length of O3HT. Organic solar cells fabricated with the copolymers and PCBM showed a broad photoresponse and a comparable efficiency to that of poly(3-hexylthiophene) (P3HT):PCBM cells. The external quantum efficiency and fluorescence spectra suggested that the intrachain energy transfer from the O3HT block to the vicinity of the DPP unit could limit the photovoltaic performance of the copolymers.

Morphological stability of organic solar cells based upon an oligo(p-phenylenevinylene)-C70 dyad.

An oligo(p-phenylenevinylene)-C(70) dyad achieves the highest power conversion efficiency (1.92%) in dyad-based organic solar cells to date. Covalent attachment in the dyad prevents large phase separation, resulting in good morphological and device stability at high temperatures as compared with mixed bulk heterojunction devices.