Ultrasensitive electrochemical detection of furazolidone in biological samples using 1D-2D BiVO4@MoS2 hierarchical nano-heterojunction composites armed electrodes.

In this work, the hydrothermally synthesized of BiVO4@MoS2 hierarchical nano-heterojunction composite is employed as a novel electrocatalyst for electrochemical sensing of Furazolidone (FZE) drug by modifying the glassy carbon electrodes (GCE). The Raman spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy and transmission electron microscopy are used to thoroughly investigate the functional groups, vibrational modes, crystal structure, elemental composition and surface topography of the heterojunction composite. The physical characterization results revealed the successful construction of 1D-2D BiVO4@MoS2 hierarchical nano-heterojunction composite. When these unique architectures are reinforced on GCE surface, we achieved an enhanced electroactive surface area of 0.154 cm2. The electrochemical performance of 1D-2D BiVO4@MoS2 is examined though cyclic voltammetry and differential pulse voltammetry (DPV) analysis. The BiVO4@MoS2 composites exhibited an excellent electrocatalytic activity in sensing of FZE with superior linear detection ranges of 0.01-14 and 14-614 µM. The limit of detection (LOD) of the BiVO4@MoS2 based sensor is determined to be 2.9 nM which is far superior than other reported FZE sensors. Consequently, it is evident from the investigation that the BiVO4@MoS2 based FZE sensor can be recommended for analyzing real time samples like human urine and blood serum with appreciable recovery.

Rationally designed f-MWCNT-coated bismuth molybdate (f-MWCNT@BMO) nanocomposites for the voltammetric detection of biomolecule dopamine in biological samples.

Selective and sensitive dopamine (DPA) sensor was developed using hydrothermally prepared functionalized multi-walled carbon nanotube-coated bismuth molybdate (f-MWCNT@BMO). The f-MWCNT@BMO-reinforced electrode exhibited an outstanding electrocatalytic activity towards DPA oxidation. The nanocomposite-reinforced electrode displayed a rapid response towards DPA sensing and possessed the minimized potential of (Epa + 0.285 V vs Ag/AgCl) in 0.1 M phosphate buffer (PB). The electrochemical results of prepared sensors were analyzed using the differential pulse voltammetry method (DPV). As a result, the f-MWCNT@BMO-reinforced electrode exhibited a widelinear range of 10 nM - 814 µM with a very low detection limit of 3.4 nM towards DPA oxidation. The developed sensor shows excellent selectivity in presence of similar functional group biomolecules. The detection of DPA in real samples was evaluated in human serum, as the results of the proposed sensor possessed good recoveries.

Electrocatalytic evaluation of graphene oxide warped tetragonal t-lanthanum vanadate (GO@LaVO4) nanocomposites for the voltammetric detection of antifungal and antiprotozoal drug (clioquinol).

Metastable and rarely reported GO warped tetragonal phase t-lanthanum vanadate nanocomposites (GO@LaVO4-NCs) are reported for the sensitive electrochemical determination of antifungal drug Clioquinol (CQ). The hydrothermal method was adopted for synthesis of GO@LaVO4-NCs. The electrochemical performance of CQ was examined using cyclic voltammetry (CV) and differential plus voltammetry (DPV) at GO@LaVO4-NCs modified glassy carbon electrode (GCE). The electrocatalytic oxidation of CQ at the GO@LaVO4-NCs/GCE shows the highest anodic peak current at a potential of +0.51 V vs. Ag/AgCl. The proposed sensor provides excellent sensitivity of 4.1894 µA µM-1 cm-2, a very low detection limit (LOD) of 2.44 nM, and a wide range of 25 nM to 438.52 µM towards CQ detection. Finally, the detection of CQ in biological media was successfully done using the GO@LaVO4-NCs/GCE and possesses recoveries of 94.67-98.0%.

An eco-friendly low-temperature synthetic approach towards micro-pebble-structured GO@SrTiO3 nanocomposites for the detection of 2,4,6-trichlorophenol in environmental samples.

The low-temperature synthesis of the graphene oxide-wrapped perovskite-type strontium titanate nanocomposites (GO@SrTiO3-NC) is reported for the electrochemical sensing of organochlorine pesticide 2,4,6-trichlorophenol (TCP) detection. The as-prepared GO@SrTiO3 nanocomposites provide a large surface area, excellent conductivity, and active sites, which are more favorable to the catalysis of TCP. The synergistic effect between the GO and the perovskite SrTiO3 results in the extended working range of 0.01 to 1.47 and 1.47 to 434.4 µM with a very low detection limit of 3.21 nM towards TCP detection. Moreover, the prepared sensor possessed good selectivity and long-term stability. Finally, the practical applicability of the sensor was tested in environmental samples of river water and soil, exhibiting adequate recovery values.

Improving sensitivity of antimicrobial drug nitrofurazone detection in food and biological samples based on nanostructured anatase-titania sheathed reduced graphene oxide.

In this study, we have prepared anatase titanium (IV) oxide warped reduced graphene oxide nanocomposites (TiO2-rGO NC) using ultrasonic methodology. The morphology of the TiO2-rGO NC was studied using FESEM and TEM. In addition, XRD, Raman, thermogravimetric analysis (TGA) and XPS are used to analyze the crystallinity and chemical composition of the TiO2-rGO NC. We have also investigated the electrochemical behavior of the as-prepared NCs with electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and different pulse voltammetry techniques (DPV). The TiO2-rGO NC modified electrode shows the lower charge transfer resistance (R ct ) of 62.87 Ω. Next, the glassy carbon electrode (GCE) was modified with sonochemically prepared TiO2-rGO NC and used to determine the electrocatalytic reduction of nitrofurazone (NTF). Thus, the proposed sensor established the wider covering range (WCR) of 0.01 to 380 µM and an excellent detection limit of 2.28 nM. Finally, the TiO2-rGO NC/GCE was applied to determine the NTF in real samples, including crayfish and human blood serum samples, which acquired good found and recovery values.

An Ultra-Sensitive Electrochemical Sensor for the Detection of Carcinogen Oxidative Stress 4-Nitroquinoline N-Oxide in Biologic Matrices Based on Hierarchical Spinel Structured NiCo2O4 and NiCo2S4; A Comparative Study.

Various factors leads to cancer; among them oxidative damage is believed to play an important role. Moreover, it is important to identify a method to detect the oxidative damage. Recently, electrochemical sensors have been considered as the one of the most important techniques to detect DNA damage, owing to its rapid detection. However, electrode materials play an important role in the properties of electrochemical sensor. Currently, researchers have aimed to develop novel electrode materials for low-level detection of biomarkers. Herein, we report the facile hydrothermal synthesis of NiCo2O4 micro flowers (MFs) and NiCo2S4 micro spheres (Ms) and evaluate their electrochemical properties for the detection of carcinogen-causing biomarker 4-nitroquinoline n-oxide (4-NQO) in human blood serum and saliva samples. Moreover, as-prepared composites were fabricated on a glass carbon electrode (GCE), and its electrochemical activities for the determination of 4-NQO were investigated by using various electrochemical techniques. Fascinatingly, the NiCo2S4-Ms showed a very low detection limit of 2.29 nM and a wider range of 0.005 to 596.64 µM for detecting 4-NQO. Finally, the practical applicability of NiCo2S4-Ms in the 4-NQO spiked human blood serum and saliva samples were also investigated.

Fabricating BiOI nanostructures armed catalytic strips for selective electrochemical and SERS detection of pesticide in polluted water.

We have constructed a dual mode catalytic strip equipped with 2D BiOI nanostructures and deployed for dual mode detection sensing of hazardous trichlorophenol (TCP). Synthesized BiOI nanostructures are investigated for its crystal architecture, morphology and chemical composition. The BiOI are loaded onto the catalytic strips with the assistance of gravity offered drying process. The BiOI nanostructures offers a very less charge transfer resistance indicating its superior catalytic properties upon the electrochemical impedance studies. It reflected on providing an excellent limit of detection (LOD) and linear sensing range for TCP in electrochemical mode. For SERS, a thin plasmonic Au layer is sputter coated on BiOI equipped catalytic strips (Au@BiOI) for the TCP detection. An impressive enhancement factor of 107 is obtained for SERS detection of TCP with good LOD of 10-10 M. Fabricated dual mode BiOI based strips are thoroughly examined for operational stability and performance in real time conditions. The fabricated high performance dual mode platform for the detection of hazardous pesticides appears to be a promising prospect for the on-the-spot investigation.

Synthesis of nickel-doped ceria nanospheres for in situ profiling of Warfarin sodium in biological media.

Venous thromboembolism is one of the major disorders, which is significantly increased the mortality and morbidity rate. Warfarin sodium (WFS) is the most extensively prescribed drug for the prevention of thromboembolic diseases however, it has a narrow therapeutic index. Recently, many methods for detecting and monitoring the level of WFS have been proposed. However, the electrochemical method has gained more interest than the other traditional method due to its ease of operation. This article describes the hydrothermal synthesis of nickel-doped cerium oxide (CeO2@Ni) nanospheres for the selective electrochemical determination of WFS. Various spectroscopic techniques have been used to analyze the chemical composition, and surface morphology of CeO2@Ni nanospheres. Further, the prepared CeO2@Ni nanospheres modified electrode demonstrated excellent electrocatalytic behavior for WFS detection, with an ultralow detection limit of 6.3 × 10-9 M, a linear range of 1.0 × 10-8 M to 1.51 × 10-4 M and 1.51 × 10-4 M to 9.51 × 10-4 M, and a higher sensitivity of 2.9986 µA µM-1 cm2. Therefore, we believe that the CeO2@Ni nanosphere electrocatalyst can serve as a potential electrode catalyst for the sensing of WFS in real-time applications.

Rational synthesis of rare-earth lanthanum molybdate covered reduced graphene oxide nanocomposites for the voltammetric detection of Moxifloxacin hydrochloride.

Recently, perovskite structure-based metal oxide nanomaterials and their composites opted for electrocatalyst because of its excellent conductivity, unique, and favored electronic structure. In this attempt, herein we prepared the rare earth mixed metal molybdate covered reduced graphene oxide La2(MoO4)3@rGO nanocomposites by a simple hydrothermal method for the sensitive detection of Moxifloxacin hydrochloride (MOF) in pharmaceutical and human urine samples. The various physicochemical analysis such as SEM, TEM, XRD and Raman spectroscopy confirms the successful formation of (La2(MoO4)3@rGO) nanocomposites. Furthermore, the electroanalytical performance of La2(MoO4)3@rGO modified glassy carbon electrode (La2(MoO4)3@rGO/GCE) was analyzed using the cyclic voltammetry (CV) and differential pulse voltammetry (DPV) which shows excellent results with a wide range of 1.0 × 10-8 M to 6.0 × 10-4 M and the detection limit of 2.84 × 10-9 M towards the MOF detection. Furthermore, the developed sensor expressed good selectivity, repeatability, stability and reproducibility. Finally, the real sample analysis of the developed sensor was tested in the MOF tablets and human urine samples, which shows the appreciable recoveries.

A sonochemical assisted synthesis of hollow sphere structured tin (IV) oxide on graphene oxide sheets for the low-level detection of environmental pollutant mercury in biological samples and foodstuffs.

In modern approaches for nanomaterials synthesis, ultrasonication plays an important role in providing the larger surface area and smaller crystalline size properties that are favorable to electrochemical techniques. Herein, we report the tin (IV) oxide on graphene oxide nanoparticles were synthesized (SnO2@GO NPs) by ultrasonic methodology (UZ SONOPULS HD 3400 Ultrasonic homogenizer) with the total power of 400 W and the (frequency of 20 kHz; 140 W/dm3). The formation of as-prepared SnO2@GO NPs and its surface morphology were scrutinized over XRD, XPS, TEM, and FESEM. Besides, the sonochemically prepared SnO2@GO NPs were employed for the determination of environmental hazardous mercury (Hg). As a result, the modified electrode acquired a very low-level detection limit of 1.2 nM with a wider range of 0.01-10.41-µM and 14.52-225.4-µM for the detection of Hg. Finally, the practical applicability of SnO2@GO NPs in spiked human blood serum and tuna fish samples shows appreciable found and recovery values. .