RESUMO
Landfill leachate contains a large amount of organic matter and ammoniacal nitrogen. As such, it has become a complex and difficult issue within the water treatment industry. The activated sludge process has been found to be a good solution with low processing costs and is now therefore the core process for leachate treatment, especially for nitrogen removal. This paper describes the characteristics and treatment of leachate. Treatment of leachate using the activated sludge process includes the removal of organic matter, ammoniacal nitrogen, and total nitrogen (TN). The core method for the removal of organic matter involves anaerobic treatment supplemented with an aerobic process. Ammoniacal nitrogen is commonly removed using a conventional aerobic treatment, and advanced TN removal is achieved using endogenous denitrification or an anaerobic ammonium oxidation (ANAMMOX) process. Since biological processes are the most economical method for TN removal, a key issue is how to tap the full potential of the activated sludge process and improve TN removal from leachate. This complex issue has been identified as the focus of current scholars, as well as an important future direction for leachate research and development.
Assuntos
Biotecnologia/métodos , Esgotos , Poluentes Químicos da Água/metabolismo , Poluentes da Água/metabolismo , Purificação da Água/métodos , Aerobiose , Anaerobiose , Nitrogênio/metabolismo , Compostos Orgânicos/metabolismoRESUMO
In this study, an N-ZnO/g-C3N4 (g-N-Z) Z-scheme photocatalyst was constructed using hydrothermal and high-temperature calcination. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and other tests were employed to characterise the catalytic material. The results showed that after N-ZnO modification, the separation efficiency of the photoinduced charge pairs and the utilisation of sunlight in the composites were improved. The kinetics experiments indicated that the degradation of atrazine (ATZ) in the g-N-Z/PDS/solar system was significantly better than that in the PDS/solar system. Under the action of the g-N-Z/PDS/solar system, the degradation rate of ATZ reached 83.88%, whereas in the PDS/solar system, it was only 31.76%. In addition, it was found that increasing the PDS concentration, g-N-Z dosage, and solution acidity effectively accelerated the removal of ATZ. The presence of HCO3-/CO32-, Cl-, and natural organic matter (NOM) inhibited the oxidation efficiency of the g-N-Z/PDS/solar system. Moreover, the presence of multiple reactive oxygen species (ROS) was confirmed using radical scavenging experiments to determine the contribution of each active component. Twelve oxidation intermediates of ATZ were obtained via liquid chromatography-tandem mass spectrometry (LC-MS/MS), and the mechanism of enhanced ATZ degradation in the g-N-Z/PDS/solar system was proposed. Actual water and cyclic photocatalytic experiments further suggest that g-N-Z has good application value in water treatment.
Assuntos
Atrazina , Óxido de Zinco , Atrazina/análise , Luz Solar , Oxidantes , Espectroscopia de Infravermelho com Transformada de Fourier , Cromatografia Líquida , Espectrometria de Massas em TandemRESUMO
In this work, ferrate (Fe(VI)) and calcium sulfite (CaSO3) were combined to treat surface water for improving ultrafiltration (UF) performance. During the pre-treatment process, the Fe(VI) and CaSO3 activated each other and a variety of active species (Fe(V), Fe(IV), OH, SO4-, 1O2, etc.) were generated. All of the five fluorescent components were effectively eliminated to different extents. With Fe(VI)/CaSO3 = 0.05/0.15 mM, the dissolved organic carbon and UV254 reduced by 44.33 % and 50.56 %, respectively. After UF, these values were further decreased with the removal rate of 50.27 % and 70.79 %. In the UF stage, the terminal J/J0 increased to 0.42 from 0.17, with the reversible and irreversible fouling decreased by 67.08 % and 79.45 % at most. The membrane pore blocking was significantly mitigated, as well as the foulants deposition on membrane surfaces was decreased to some extent. The complete blocking was altered to standard blocking and intermediate blocking, the volume when entering cake filtration was also delayed slightly. The extended Derjaguin-Landau-Verwey-Overbeek theory was employed to judge the interface fouling behavior, and the results indicated that the foulants became more hydrophilic, as well as the adhesion trend between foulants and membrane surface was weakened. Overall, these results provide a theoretical foundation for the practical application of the combined Fe(VI)/CaSO3-UF process in surface water purification.
Assuntos
Ultrafiltração , Purificação da Água , Ultrafiltração/métodos , Cálcio , Água , Membranas Artificiais , Purificação da Água/métodos , SulfitosRESUMO
Oxidation treatment of algae-laden water may cause cells rupture and emission of intracellular organics, thus restricting its further popularization. As a moderate oxidant, calcium sulfite could be slowly released in the liquid phase, thus exhibiting a potential to maintain the cells integrity. To this end, calcium sulfite oxidation activated by ferrous iron was proposed integrated with ultrafiltration (UF) for removal of Microcystis aeruginosa, Chlorella vulgaris and Scenedesmus quadricauda. The organic pollutants were significantly eliminated, and the repulsion between algal cells was obviously weakened. Through fluorescent components extraction and molecular weights distribution analyses, the degradation of fluorescent substances and the generation of micromolecular organics were verified. Moreover, the algal cells were dramatically agglomerated and formed larger flocs under the premise of maintaining high cell integrity. The terminal normalized flux was ascended from 0.048-0.072 to 0.711-0.956, and the fouling resistances were extraordinarily decreased. Due to the distinctive spiny structure and minimal electrostatic repulsion, Scenedesmus quadricauda was easier to form flocs, and its fouling was more readily mitigated. The fouling mechanism was remarkably altered through postponing the formation of cake filtration. The membrane interface characteristics including microstructures and functional groups firmly proved the fouling control efficiency. The reactive oxygen species (i.e., SO4â¢- and 1O2) generated through the principal reactions and Fe-Ca composite flocs played dominant roles in alleviating membrane fouling. Overall, the proposed pretreatment exhibits a brilliant application potential for enhancing UF in algal removal.
Assuntos
Chlorella vulgaris , Purificação da Água , Ferro , Cálcio , Membranas Artificiais , Ultrafiltração , SulfitosRESUMO
Ultrafiltration (UF) is a reliable method to treat algal-rich water, whereas severe membrane fouling has impeded its actual application. To improve UF performance and alleviate membrane fouling resulted by algal foulants, a novel strategy coupling ferrate (Fe(VI)) and sodium percarbonate (SPC) was proposed. During the coupling process, Fe(VI) was activated by SPC to generate high-valent Fe intermediates (Fe(V) and Fe(IV)), which played a crucial role in high-efficiency oxidation for algal foulants, and the in-situ formed Fe(III) particles decomposed by Fe(VI) also enhanced the coagulation and adsorption capacity to the coupling system. Under the triple effects of coagulation, adsorption and oxidation, the algal foulants were efficiently eliminated. The zeta potential increased from -32.70 mV to -6.56 mV at most, the particle size was significantly enlarged, and the generated flocs possessed a great settleability. The morphology, viability, and integrity of algae cells were effectively maintained. The dissolved organic matters and fluorescent organics were efficiently removed, as well as macromolecular organics were reduced into lower molecular weight components. With the collaborative effect of Fe(VI) and SPC, the terminal specific flux was increased from 0.29 to 0.92, and the reversible and irreversible fouling resistances were reduced by 98.5% and 69.4%, individually. The surface functional groups were changed, and the dominant mechanisms were also converted to pore blocking from cake layer filtration. Overall, the experimental results would provide some new thoughts in actual production for algal-rich water treatment and UF membrane fouling alleviation.
Assuntos
Ultrafiltração , Purificação da Água , Carbonatos , Compostos Férricos , Ferro , Membranas Artificiais , Purificação da Água/métodosRESUMO
Persulfate oxidation has been increasingly integrated with membrane separation for water purification, whereas the oxidizing ability of persulfate is relatively limited, and appropriate activation methods are urgently required. In this work, a novel catalyst of carbon nanofiber (CNF) supported CuO (CuO@CNF) was synthesized for peroxymonosulfate (PMS) activation. The micro-morphology showed that CuO nanoparticles were well dispersed on the CNF support, which solved the agglomeration problem of nanoparticles and improved the catalytic ability. Furtherly, PMS oxidation activated by CuO@CNF was proposed as a pre-processing means for improving ultrafiltration (UF) water purification efficiency and mitigating membrane fouling. The prepared CuO@CNF was more efficient than individual CNF and CuO in activating PMS for the reduction of various typical natural organic matter, improving permeation flux, and mitigating membrane fouling. The fouling control efficiencies were also verified by characterizing the membrane surface functional groups. The CuO@CNF catalyst could signally promote the oxidative capacity by generating a series of reactive oxygen species, thus enhancing the removal of organics with varying species and molecular weight ranges in surface water. With respect to the fouling condition, the specific permeation flux after filtration was improved from 0.25 to 0.61, with the removal rate of reversible fouling resistance reached 89.6%. The fouling mechanism was apparently altered, with both standard and complete blocking dominated throughout the filtration process. The findings are beneficial for the development of new strategies to improve membrane-based water purification efficiency.
Assuntos
Nanofibras , Purificação da Água , Carbono , Cobre , Membranas Artificiais , Peróxidos , Ultrafiltração/métodos , Purificação da Água/métodosRESUMO
The degradation of iopamidol (IPM) was investigated using a UV365/NaClO system. The reactive species (HO·, ClO·, ozone, Cl·, and Cl2-·) in the system were identified, and the changing trends of the percentage contributions of these reactive species to IPM removal under various conditions were systematically evaluated. The results showed that ClO· and HO· played the most significant roles in the apparent pseudo-first-order rate constants of IPM degradation (kobs, min-1) in the control experiment, and their percentage contributions to kobs were 41.31% and 34.45%, respectively. In addition, Cl· and Cl2-· together contributed 22% to the kobs. Furthermore, the contribution of ozone to the IPM removal could be neglected. The concentrations of these species increased significantly when the concentration of NaClO was increased from 50 µM to 200 µM, while the percentage contribution of ClO· to kobs was greatly increased. The concentrations and percentage contributions of HO· and ClO· decreased significantly as the solution pH increased from 5 to 9, with Cl2-· playing a greater role in the degradation of IPM under alkaline conditions. While Cl- or HCO3-/CO32- significantly promoted the generation of Cl2-· or CO3-·, neither had an obvious effect on kobs, suggesting that Cl2-· and CO3-· should have a certain reactivity with IPM. Compared with that of Cl2-·, the percentage contribution of ClO· and Cl· to kobs was more likely to be inhibited by NOM. In addition, the organic and inorganic oxidation products of IPM were detected. The oxidation mechanisms of IPM degradation in the UV365/NaClO system, such as the H-extraction reaction, deiodination, substitution reaction, amide hydrolysis, and amine oxidation, were proposed according to the obtained 15 organic products. No effect on acute toxicity towards Vibrio fischeri and Photobacterium phosphoreum was detected during the oxidation of IPM by the UV365/NaClO system. Furthermore, the engineering feasibility of the oxidation system was demonstrated, by the effective degradation of IPM in actual water. However, HOI rapidly accumulated during the removal of IPM in the UV365/NaClO system, which poses certain environmental risks and will needs to be investigated.
Assuntos
Ozônio , Poluentes Químicos da Água , Purificação da Água , Cloro , Iopamidol , Cinética , Oxirredução , Raios Ultravioleta , Poluentes Químicos da Água/análise , Purificação da Água/métodosRESUMO
Membrane technology has been shown to be promising for the treatment of algae-laden water, but membrane fouling is still an obstacle influencing the purification efficiency and effluent quality. To mitigate ultrafiltration membrane fouling during Microcystis aeruginosa-laden water treatment, a strategy of sodium percarbonate pre-oxidation activated with ferrous ion (Fe2+/SPC) was put forward in this study. Due to the synergistic effect of Fe2+ and SPC, this process was significantly more efficient with the terminal specific flux increased from 0.097 to 0.397, and the reversible fouling resistance reduced by approximately 80%. It was also found that subsequent sedimentation followed by Fe2+/SPC could further improve the fouling control efficiency. The model fitting results indicated that Fe2+/SPC pre-oxidation delayed the transition from standard blocking to cake filtration. Extracellular organic matter and algal cells were extracted from algal foulants to explore the contribution of each component, and the fouling control efficiencies were systematically studied. The characteristics of the algal foulants were determined with fluorescence excitation-emission matrix spectrum, and the results suggested that macromolecular proteinaceous substances were more efficiently removed by Fe2+/SPC, in comparison with humic-like matters. The alleviation of membrane fouling was also verified by the characterization methods of scanning electron microscopy and attenuated total reflection-Fourier infrared spectroscopy. Overall, the proposed strategy of Fe2+/SPC has an application prospect for membrane fouling control in algal-laden water treatment.
Assuntos
Ultrafiltração , Purificação da Água , Carbonatos , Membranas Artificiais , ÁguaRESUMO
Organic micro-pollutants such as pesticides and endocrine disruptors cause serious harm to human health and aquatic ecosystem. In this study, the potential degradation of atrazine (ATZ), triclosan (TCS), and 2,4,6-trichloroanisole (TCA) by UV-activated peroxydisulfate (UV/PDS) and UV-activated H2O2 (UV/H2O2) processes were evaluated under different conditions. Results showed that UV/PDS process was more effective than UV/H2O2 under the same conditions. Increasing oxidant dosage or decreasing the initial ATZ, TCS, and TCA concentrations promoted the degradation rates of these three compounds. The presence of natural organic matter (NOM) could effectively scavenge sulfate radical (SO4â¢-) and hydroxyl radical (HOâ¢) and reduced the removal rates of target compounds. Degradation rates of ATZ and TCA decreased with pH increasing from 5.0 to 9.0 in UV/PDS process, while in UV/H2O2 process, the increase of solution pH had little effect on ATZ and TCA degradation. In the UV/PDS and UV/H2O2 oxidation process, when the solution pH increased from 5 to 8, the removal rates of TCS decreased by 19% and 1%, while when the solution pH increased to 9, the degradation rates of TCS increased by 23% and 17%. CO32-/HCO3- had a small inhibitory effect on ATZ and TCA degradation by UV/H2O2 and UV/PDS processes but promoted the degradation of TCS significantly (> 2 mM). Cl- had little effect on the degradation of ATZ, TCA, and TCS in UV/H2O2 process. Cl- significant inhibited on the degradation of ATZ and TCS, but the influence of Cl- on the degradation of TCA was weak in UV/PDS process. Based on these experimental results, the various contributions of those secondary radicals (i.e., carbonate radical, chlorine radical) were discussed. This study can contribute to better understand the reactivities when UV/PDS and UV/H2O2 are applied for the treatment of micro-pollutant-containing waters.
Assuntos
Poluentes Ambientais , Poluentes Químicos da Água/análise , Purificação da Água , Ecossistema , Peróxido de Hidrogênio , Cinética , Oxirredução , Raios UltravioletaRESUMO
A modified single sequencing batch reactor (SBR) was developed to remove the nitrogen of the real landfill leachate in this study. To take the full advantage of the SBR, stir phase was added before and after aeration, respectively. The new mechanism in this experiment could improve the removal of nitrogen efficiently by the utilization of carbon source in the raw leachate. This experiment adopts the SBR process to dispose of the real leachate, in which the COD and ammonia nitrogen concentrations were about 3800 mg/L and 1000 mg/L, respectively. Results showed that the removal rates of COD and total nitrogen were above 85% and 95%, respectively, and the effluent COD and total nitrogen were less than 500 mg/L and 40 mg/L under the condition of not adding any carbon source. Also, the specific nitrogen removal rate was 1.48 mgN/(h·gvss). In this process, polyhydroxyalkanoate (PHA) as a critical factor for the highly efficient nitrogen removal (>95%) was approved to be the primary carbon source in the sludge. Because most of the organic matter in raw water was used for denitrification, in the duration of this 160-day experiment, zero discharge of sludge was realized when the effluent suspended solids were 30-50 mg/L.
Assuntos
Nitrogênio/química , Esgotos/química , Poluentes Químicos da Água/química , Purificação da Água , Reatores Biológicos , Carbono/química , Humanos , Poli-Hidroxialcanoatos/química , Eliminação de Resíduos Líquidos/métodosRESUMO
An integration pollutant index (IPI) evaluation method with proportional addition of toxicity pollution sub-index (TPI), persistence pollution sub-index (PPI), and bio-accumulation pollution sub-indexes (BPI) for polychlorinated biphenyls (PCBs) pollution in soil was set up for the first time by referring to the conception of IPI and introducing the standard value series of total PCBs employed by national guideline and standards office, Canada. The relevant expressions for pollution indexes were defined; three transformation coefficients for PCBs toxicity (T(i)), persistence (P(i), and bio-accumulation (B(i) pollution were apportioned, too. Then, by the application of the evaluation method, the IPIs for PCBs pollution evaluations in 22 soil sample stations in the Yellow River Delta and a background sample were accomplished successfully, the quantification results were in range of 1.1-531.7, the qualification result was that the Yellow River Delta was slightly polluted by PCBs. This integrated evaluation model considered the characteristic differences between PCBs congeners and was more scientifical and comprehensive than current method, and should be employed in evaluations of persistent organic pollutants (POPs).