O-B(F)←N Functionalized Copolymers with Delayed Fluorescence and P-Type Semiconducting Characteristics.

Conjugated polymers with integrating properties of delayed fluorescence and photovoltaic responses simultaneously are scarcely reported due to the generally contradictory requirements for molecular structures to achieve the two properties. Herein, an O-B(F)←N functionalized fused unit (M) with multiple resonance features, small energy gap between lowest singlet excited state (S1) and triplet excited state (T1) (ΔEST = 0.23 eV), and delayed fluorescence (τD = 0.75 µs), is designed. Selecting three benzodithiophene (BDT) derivatives as co-units to copolymerize with M, leading to a series of O-B(F)←N embedded polymers also maintaining delayed fluorescence (τD = 0.4-0.5 µs). Moreover, p-type semiconductor characteristics are tested for these polymers with hole mobilities in the range of 10-6-10-5 cm2/Vs. Devices with obviously photovoltaic responses are prepared using these polymers as donors and Y6 as the acceptor, affording a preliminary efficiency of 5.05%. This work successfully demonstrates an effective strategy to design conjugated polymers with integrating properties of delayed fluorescence and photovoltaic performance simultaneously by introducing O-B(F)←N functional groups to polymer backbones.

Improving Photovoltaic Performance of All-Polymer Solar Cells by Adding an Amorphous B←N Embedded Polymer as the Third Component.

Currently, most of the disclosed ternary strategies to improve photovoltaic performance of all-polymer solar cells (all-PSCs) commonly focus on the guest polymers having similar structures with the host polymer donors or acceptors. Herein, this work develops a distinctive ternary method that adding an amorphous B←N embedded polymer named BN-Cl-2fT to a crystallized host polymer blend of PM6 (a commercialized polymer donor) and PY-TT (a copolymer of Y6 and thieno[3,2-b]thiophene). Although the structures between BN-Cl-2fT and PM6 and PY-TT are completely different, excellent miscibility is found between BN-Cl-2fT and both of the host PM6 and PY-TT, which can be interpreted by the crowded phenyl groups anchoring along the backbone of BN-Cl-2fT, leading to weak self-aggregation. Glazing incidence wide-angle X-ray diffraction (GIWAXS) measurements explicitly confirm the crystallization of PM6 and PY-TT and amorphous feature of BN-Cl-2fT. Furthermore, adding 10 wt% BN-Cl-2fT to PM6:PY-TT can significantly enhance the crystallization of the host polymers. Thus the ternary devices based on PM6:PY-TT:BN-Cl-2fT afford promote short-circuit current density (JSC , 23.29 vs. 21.80 mA cm-2 ), fill factor (FF, 62.4% vs. 60.0%), and power conversion efficiency (PCE, 13.70% vs. 12.23%) in contrast to these parameters of binary devices based on PM6:PY-TT. This work provides a unique and enlightening avenue to design high performance all-PSCs by adding amorphous B←N embedded polymers as guest component to enhance host-crystallization.

Heat Stress Alleviation by Exogenous Calcium in the Orchid Dendrobium nobile Lindl: A Biochemical and Transcriptomic Analysis.

The growth of Dendrobium nobile is sensitive to heat stress. To find an effective method for enhancing heat tolerance, this study investigated the relieving effect of exogenous calcium at different concentrations (0 mmol/L, 5 mmol/L, 10 mmol/L, 15 mmol/L, 20 mmol/L CaCl2) on heat stress in D. nobile. Principal component analysis was used to screen the optimal exogenous calcium concentration, and transcriptome analysis was used to reveal its possible heat tolerance mechanism. The results showed that compared with the T0, a 10 mmol/L calcium treatment: increased the average leaf length, leaf width, plant height, and fresh matter accumulation of D. nobile by 76%, 103.39%, 12.97%, and 12.24%, respectively (p < 0.05); significantly increased chlorophyll a (Chla), chlorophyll b (Chlb), carotenoids(Car), ascorbic acid (ASA), glutathione (GSH), and flavonoids by 15.72%, 8.54%, 11.88%, 52.17%, 31.54%, and 36.12%, respectively; and effectively enhanced the enzyme activity of the antioxidant system, increasing superoxide dismutase (SOD), peroxidase (POD), and catalase (CAT) by 1.38, 1.61, and 2.16 times, respectively (p < 0.05); At the same time, the treatment can effectively reduce the yellow leaf rate and defoliation rate of D. nobile under heat stress. The principal component analysis method and membership function were used to calculate the D value to rank the relief effects of each calcium treatment group, and the results also showed that 10 mmol/L CaCl2 had the best relief effect. Transcriptomics testing identified 7013 differentially expressed genes, of which 2719 were upregulated, and 294 were downregulated. Among them, genes such as HSPA1s, HSP90A, HSPBP1, ATG8, COMT, REF1, E1.11.1.7, along with transcription factors such as MYB, bHLH, WRKY, and NAC, formed the network of tolerance to heat stress in D. nobile. This study provides new insights for improving the cultivation techniques of D. nobile.

Zinc affects the physiology and medicinal components of Dendrobium nobile Lindl.

The growth of Dendrobium nobile is often influenced by zinc. Here, D. nobile was regularly sprayed with different concentrations (0, 50, 100, 200, 400, 800, 1000, 2000 µmol L-1) of zinc to study its effect on the growth and biosynthesis of medicinal components. Samples were taken at 0, 7, 14, and 21 days to detect physiological and medicinal components. The results showed that the net photosynthetic rate, transpiration rate, stomatal conductance, and Chl A and Chl B levels of leaves first increased and then decreased as the concentration of zinc increased. At 400 µmol L-1 concentration, these parameters reached their maximum values. Thus, a certain dose of zinc could promote the photosynthesis of D. nobile. There was an obvious increase in the synthesis of superoxide dismutase (SOD), while the content of ascorbate peroxidase and ascorbic acid (AsA) were the highest after treatment with 400 µmol L-1 zinc. Maximum levels of polysaccharides and polyphenols were observed on day 7 and 14, respectively, at a zinc concentration of 400 µmol L-1. These results suggest that exogenous zinc may promote the accumulation of medicinal components in D. nobile. It was also found that polysaccharides could combine well with zinc to form a polysaccharide-zinc chelate and transform inorganic zinc into organic form, which is stored in the form of polysaccharide-Zn and is known to reduce the damage induced by Zn stress.