Precise Tuning of the D-Band Center of Dual-Atomic Enzymes for Catalytic Therapy.

Single-atom nanozyme-based catalytic therapy is of great interest in the field of tumor catalytic therapy; however, their development suffers from the low affinity of nanozymes to the substrates (H2O2 or O2), leading to deficient catalytic activity in the tumor microenvironment. Herein, we report a new strategy for precisely tuning the d-band center of dual-atomic sites to enhance the affinity of metal atomic sites and substrates on a class of edge-rich N-doped porous carbon dual-atomic sites Fe-Mn (Fe1Mn1-NCe) for greatly boosting multiple-enzyme-like catalytic activities. The as-made Fe1Mn1-NCe achieved a much higher catalytic efficiency (Kcat/Km = 4.01 × 105 S-1·M-1) than Fe1-NCe (Kcat/Km = 2.41 × 104 S-1·M-1) with an outstanding stability of over 90% activity retention after 1 year, which is the best among the reported dual-atom nanozymes. Theoretical calculations reveal that the synergetic effect of Mn upshifts the d-band center of Fe from -1.113 to -0.564 eV and enhances the adsorption capacity for the substrate, thus accelerating the dissociation of H2O2 and weakening the O-O bond on O2. We further demonstrated that the superior enzyme-like catalytic activity of Fe1Mn1-NCe combined with photothermal therapy could effectively inhibit tumor growth in vivo, with an inhibition rate of up to 95.74%, which is the highest value among the dual-atom artificial enzyme therapies reported so far.

High-Volumetric Density Atomic Cobalt on Multishell ZnxCd1-xS Boosts Photocatalytic CO2 Reduction.

The volumetric density of the metal atomic site is decisive to the operating efficiency of the photosynthetic nanoreactor, yet its rational design and synthesis remain a grand challenge. Herein, we report a shell-regulating approach to enhance the volumetric density of Co atomic sites onto/into multishell ZnxCd1-xS for greatly improving CO2 photoreduction activity. We first establish a quantitative relation between the number of shell layers, specific surface areas, and volumetric density of atomic sites on multishell ZnxCd1-xS and conclude a positive relation between photosynthetic performance and the number of shell layers. The triple-shell ZnxCd1-xS-Co1 achieves the highest CO yield rate of 7629.7 µmol g-1 h-1, superior to those of the double-shell ZnxCd1-xS-Co1 (5882.2 µmol g-1 h-1) and single-shell ZnxCd1-xS-Co1 (4724.2 µmol g-1 h-1). Density functional theory calculations suggest that high-density Co atomic sites can promote the mobility of photogenerated electrons and enhance the adsorption of Co(bpy)32+ to increase CO2 activation (CO2 → CO2* → COOH* → CO* → CO) via the S-Co-bpy interaction, thereby enhancing the efficiency of photocatalytic CO2 reduction.

Excited-State Intramolecular Proton Transfer-Driven Photon-Gating for Photoelectrochemical Sensing of CO-Releasing Molecule-3.

Different from prevalent approaches such as immunological recognition, complementary base pairing, or enzymatic regulation in current photoelectrochemical (PEC) sensing, this study reported an excited-state intramolecular proton transfer (ESIPT)-driven photon-gating PEC sensor. The sensor is developed for the detection of CO-releasing molecule-3 (CORM-3) by modifying an ESIPT-switched organic fluorescent probe molecule (NDAA) onto the surface of a p-type semiconductor (BiOI). The NDAA can be excited and exhibit strong green fluorescence after responding with CORM-3, resulting in an electrode-interface photon competitive absorption effect due to the switch on ESIPT and considerably reducing the photocurrent signal. The experimental results revealed that the as-developed PEC sensor achieved good analytical performance with high selectivity and sensitivity, with a linear range of 0.01-1000 µM and a lower detection limit of 6.5 nM. This work demonstrates the great potential of the organic fluorescent probe molecule family in advancing PEC analysis. It is anticipated that our findings will stimulate the creation of diverse functional probes possessing distinctive characteristics for inventive PEC sensors.

Mechanism Exploration of the Photoelectrochemical Immunoassay for the Integration of Radical Generation with Self-Quenching.

Photoelectrochemical (PEC) sensing mechanisms based on enzyme-catalyzed strategies primarily achieve the quantitative analysis of biomolecules through the enhancement or attenuation of photocurrent signals. However, there are still no reports that delve into the principles of photocurrent signaling conversion in the reaction between photoactive materials and the biomolecules. In this work, we demonstrated that indium oxysulfide InOS-0.5 heterojunction has excellent peroxidase activity to catalyze the reaction of H2O2-generated hydroxyl radicals (•OH) with the self-generated electrons, thereby resulting in synergistic quenching of the photocurrent signal. Based on the above principles, we coupled InOS-0.5 with a sandwich-type immunoassay to introduce H2O2 production catalyzed by glucose oxidase for the development of a PEC immunosensing platform. H2O2 reacted with InOS-0.5 to produce •OH with strong oxidizing properties, thus quenching the photogenerated electrons and realizing the PEC detection of the carcinoembryonic antigen (CEA, as a model analyte). The photocurrent intensity decreases with the logarithmic increase in CEA concentration (0.02-50 ng mL-1), with a remarkable limit of detection of 8.9 pg mL-1 (S/N = 3). This study further investigates the mechanism of hydrogen peroxide-induced photocurrent quenching, providing deeper insights into the mechanisms of electron-hole transport in hollow porous semiconductor materials and paving the way for the development of efficient PEC sensors.

Bimetallic Single-Atom Nanozyme-Based Electrochemical-Photothermal Dual-Function Portable Immunoassay with Smartphone Imaging.

Rapid and accurate detection of human epidermal growth factor receptor 2 (HER2) is crucial for the early diagnosis and prognosis of breast cancer. In this study, we reported an iron-manganese ion N-doped carbon single-atom catalyst (FeMn-NCetch/SAC) bimetallic peroxidase mimetic enzyme with abundant active sites etched by H2O2 and further demonstrated unique advantages of single-atom bimetallic nanozymes in generating hydroxyl radicals by density functional theory (DFT) calculations. As a proof of concept, a portable device-dependent electrochemical-photothermal bifunctional immunoassay detection platform was designed to achieve reliable detection of HER2. In the enzyme-linked reaction, H2O2 was generated by substrate catalysis via secondary antibody-labeled glucose oxidase (GOx), while FeMn-NCetch/SAC nanozymes catalyzed the decomposition of H2O2 to form OH*, which catalyzed the conversion of 3,3',5,5'-tetramethylbenzidine (TMB) to ox-TMB. The ox-TMB generation was converted from the colorimetric signals to electrical and photothermal signals by applied potential and laser irradiation, which could be employed for the quantitative detection of HER2. With the help of this bifunctional detection technology, HER2 was accurately detected in two ways: photothermally, with a linear scope of 0.01 to 2.0 ng mL-1 and a limit of detection (LOD) of 7.5 pg mL-1, and electrochemically, with a linear scope of 0.01 to 10 ng mL-1 at an LOD of 3.9 pg mL-1. By successfully avoiding environmental impacts, the bifunctional-based immunosensing strategy offers strong support for accurate clinical detection.

Pt/Zn-TCPP Nanozyme-Based Flexible Immunoassay for Dual-Mode Pressure-Temperature Monitoring of Low-Abundance Proteins.

Pressure and temperature, as common physical parameters, are important for monitoring human health. In contrast, single-mode monitoring is prone to causing experimental errors. Herein, we innovatively designed a dual-mode flexible sensing platform based on a platinum/zinc-meso-tetrakis(4-carboxyphenyl)porphyrin (Pt/Zn-TCPP) nanozyme for the quantitative monitoring of carcinoembryonic antigen (CEA) in biological fluids with pressure and temperature readouts. The Pt/Zn-TCPP nanozyme with catalytic and photothermal efficiencies was synthesized by means of integrating photosensitizers into porous materials. The flexible sensing system after the antigen-antibody reaction recognized the pressure using a flexible skin-like pressure sensor with a digital multimeter readout, whereas the temperature was acquired via the photoheat conversion system of the Pt/Zn-TCPP nanozyme under 808 nm near-infrared (NIR) irradiation using a portable NIR imaging camera on a smartphone. Meanwhile, the dual-mode flexible sensing system was carried out on a homemade three-dimensional (3D)-printed device. Results revealed that the developed dual-mode immunosensing platform could exhibit good pressure and temperature responses within the dynamic range of 0.5-100 ng mL-1 CEA with the detection limits of 0.24 and 0.13 ng mL-1, respectively. In addition, the pressure and temperature were sensed simultaneously without crosstalk interference. Importantly, the dual-mode flexible immunosensing system can effectively avoid false alarms during the measurement, thus providing great potential for simple and low-cost development for point-of-care testing.

Multi-Enzyme Cascade Nanoreactors for High-Throughput Immunoassay: Transitioning Concept in Lab to Application in Community.

In this work, we reported a cholesterol oxidase (Chox)-loaded platinum (Pt) nanozyme with the collaborative cascade nanoreactor for the construction of nanozyme-enzyme-linked immunosorbent assay (N-ELSA) models to realize high-throughput rapid evaluation of cancer markers. Considering the high specific surface area and manipulable surface sites, ZIF-8 was used as a substrate for natural enzyme and nanozyme loading. The constructed ZIF-8-Pt nanozyme platform exhibited efficient enzyme-like catalytic efficiency with a standard corrected activity of 60.59 U mg-1, which was 12 times higher than that of the ZIF-8 precursor, and highly efficient photothermal conversion efficiency (∼35.49%). In N-ELISA testing, developed multienzyme photothermal probes were immobilized in microplates based on antigen-antibody-specific reactions. Cholesterol was reacted in a cascade to reactive oxygen radicals, which attacked 3,3',5,5'-tetramethylbenzidine, causing it to oxidize and color change, thus exhibiting highly enhanced efficient photothermal properties. Systematic temperature evaluations were performed by a hand-held microelectromechanical system thermal imager under the excitation of an 808 nm surface light source to determine the cancer antigen 15-3 (CA15-3) profiles in the samples. Encouragingly, the temperature signal from the microwells increased with increasing CA15-3, with a linear range of 2 mU mL-1 to 100 U mL-1, considering it to be the sensor with the widest working range for visualization and portability available. This work provides new horizons for the development of efficient multienzyme portable colorimetric-photothermal platforms to help advance the community-based process of early cancer detection.

Versatile Bovine Serum Albumin as Ingenious Electron Operator-Enhanced Photoelectrochemical Biosensing for Ultrasensitive Detection of miRNA.

Bovine serum albumin (BSA) has been widely used in biosensors as a blocking agent. Herein, conformist BSA was first exploited as an ingenious operator to enhance the photocurrent response of (2Z,2'Z)-2,2'-(1,4-phenylene)bis(3-(4-(bis(4-methoxyphenyl)amino)phenyl)acrylonitrile) (TPDCN)-based photoelectrochemical (PEC) platform via manipulating the electron transfer process of the detection system. Concretely, the presence of target molecules triggered catalytic hairpin assembly reaction and subsequently powered terminal deoxynucleotidyl transferase-mediated signal amplification to produce the AgNP@BSA-DNA dendrimer nanostructure. After being treated with HNO3, a large amount of BSA could be released from the dendrimer nanostructure. When they were transferred to the TPDCN-based PEC platform, the photocurrent response of the biosensor was largely enhanced because BSA can manipulate the electrons of TPDCN via a well-matched energy level to form a new electron transfer track. Meanwhile, tryptophan (Trp) in BSA could be oxidized to quinone Trp-O under photoirradiation, which can facilitate the oxidation of ascorbate and generate more H+ to promote the migration of photogenerated electrons. As a result, the proposed PEC biosensor exhibits excellent analytical performance for detection of miRNA-21 (as a model target) over a wide linear range of 0.01 to 10,000 pM with detection limit as low as 4.7 fM. Overall, this strategy provides a new perspective on constructing efficient PEC biosensors, which expands the potential applications in bioanalysis and clinical diagnosis.

Domain-Limited Sub-Nanometer Co Nanoclusters in Defective Nitrogen Doped Carbon Structures for Non-Invasive Drug Monitoring.

In this work, sub-nanometer Co clusters anchored on porous nitrogen-doped carbon (C─N─Co NCs) are successfully prepared by high-temperature annealing and pre-fabricated template strategies for non-invasive sensing of clozapine (CLZ) as an efficient substrate adsorption and electrocatalyst. The introduction of Co sub-nanoclusters (Co NCs) provides enhanced electrochemical performance and better substrate adsorption potential compared to porous and nitrogen-doped carbon structures. Combined with ab initio calculations, it is found that the favorable CLZ catalytic performance with C─N─Co NCs is mainly attributed to possessing a more stable CLZ adsorption structure and lower conversion barriers of CLZ to oxidized state CLZ. An electrochemical sensor for CLZ detection is conceptualized with a wide operating range and high sensitivity, with monitoring capabilities validated in a variety of body fluid environments. Based on the developed CLZ sensing system, the CLZ correlation between blood and saliva and the accuracy of the sensor are investigated by the gold standard method and the rat model of drug administration, paving the way for non-invasive drug monitoring. This work provides new insights into the development of efficient electrocatalysts to enable drug therapy and administration monitoring in personalized healthcare systems.

A cerium-doped tungsten trioxide-functionalized sensing platform for photoelectrochemical detection of ascorbic acid with high sensitivity.

A highly efficient photoelectrochemical (PEC) strategy was proposed for the determination of ascorbic acid (AA). Cerium-doped tungsten trioxide (Ce-WO3) microrods were synthesized by a hydrothermal method and further characterized through transmission electron microscopy (TEM), X-ray diffraction (XRD), and Raman spectroscopy. Thereafter, they were deposited onto a cleaned fluorine-doped tin oxide (FTO) glass forming the working electrode as the photoactive material. Under strong visible light irradiation, the resulting PEC sensing platform generated the corresponding electron-hole pairs, converting light signals into electrical signals. Ascorbic acid served as a good electron donor to trap holes for improvement of photocurrent responses on Ce-WO3/FTO. Besides, the strength of photocurrent signals versus the logarithm of ascorbic acid concentration showed a good linearity over the ascorbic acid concentration range of 100-4000 nM and the limit of detection (LOD) was estimated to be 28.6 nM. Importantly, this PEC sensor had a fast response, high sensitivity, and distinguished selectivity for detecting ascorbic acid. In addition, it also had the features of being simple to fabricate, low production cost, and portable, which made it a promising means of ascorbic acid determination.

Laser-induced CdS/TiO2/graphene dual photoanodes for ratiometric self-powered photoelectrochemical sensor: an innovative approach for aflatoxin B1 detection.

A ratiometric self-powered photoelectrochemical sensor based on laser direct writing technology was constructed to address the problem that the conventional single-signal detection mode was susceptible to the influence of instrumentation and environmental factors, which interfered with the detection results. Laser-induced CdS/TiO2/Graphene was prepared as dual photoanodes (PA1 and PA2), which were controlled by multiplexed switches to form a photocatalytic fuel cell with Pt cathode. By modifying the aptamer of aflatoxin B1 (AFB1) on the photoanode surface, the target was specifically captured to the electrode surface to form a biological complex, which increased the steric hindrance and affected the electron transfer, thus reducing the output signal of the sensor. Targets with different concentrations were incubated on the surface of PA1, and targets with fixed concentrations were incubated on the surface of PA2. Under the control of the multiplex switch, the output signals of the two photoanodes were recorded, and the ratio of these two signals was used as the basis for the quantitative detection of AFB1. The sensor output was linearly increasing with the logarithm of AFB1 concentration from 1.0 to 150 ng mL-1 and the detection limit was 0.0974 ng mL-1. Additionally, this method had good stability, fast response, and good selectivity to real samples, providing an effective method for food safety monitoring.

An intelligent Cu/ZIF-8-based nanodrug delivery system for tumor-specific and synergistic therapy via tumor microenvironment-responsive cascade reaction.

An intelligent nanodrug delivery system (Cu/ZIF-8@GOx-DOX@HA, hereafter CZGDH) consisting of Cu-doped zeolite imidazolate framework-8 (Cu/ZIF-8, hereafter CZ), glucose oxidase (GOx), doxorubicin (DOX), and hyaluronic acid (HA) was established for targeted drug delivery and synergistic therapy of tumors. The CZGDH specifically entered tumor cells through the targeting effect of HA and exhibited acidity-triggered biodegradation for subsequent release of GOx, DOX, and Cu2+ in the tumor microenvironment (TME). The GOx oxidized the glucose (Glu) in tumor cells to produce H2O2 and gluconic acid for starvation therapy (ST). The DOX entered the intratumoral cell nucleus for chemotherapy (CT). The released Cu2+ consumed the overexpressed glutathione (GSH) in tumor cells to produce Cu+. The generated Cu+ and H2O2 triggered the Fenton-like reaction to generate toxic hydroxyl radicals (·OH), which disrupted the redox balance of tumor cells and effectively killed tumor cells for chemodynamic therapy (CDT). Therefore, synergistic multimodal tumor treatment via TME-activated cascade reaction was achieved. The nanodrug delivery system has a high drug loading rate (48.3 wt%), and the three-mode synergistic therapy has a strong killing effect on tumor cells (67.45%).

Atomically Site Synergistic Effects of Dual-Atom Nanozyme Enhances Peroxidase-like Properties.

Pursuing effective and generalized strategies for modulating the electronic structures of atomically dispersed nanozymes with remarkable catalytic performance is exceptionally attractive yet challenging. Herein, we developed a facile "formamide condensation and carbonization" strategy to fabricate a library of single-atom (M1-NC; 6 types) and dual-atom (M1/M2-NC; 13 types) metal-nitrogen-carbon nanozymes (M = Fe, Co, Ni, Mn, Ru, Cu) to reveal peroxidase- (POD-) like activities. The Fe1Co1-NC dual-atom nanozyme with Fe1-N4/Co1-N4 coordination displayed the highest POD-like activity. Density functional theory (DFT) calculations revealed that the Co atom site synergistically affects the d-band center position of the Fe atom site and served as the second reaction center, which contributes to better POD-like activity. Finally, Fe1Co1 NC was shown to be effective in inhibiting tumor growth both in vitro and in vivo, suggesting that diatomic synergy is an effective strategy for developing artificial nanozymes as novel nanocatalytic therapeutics.

D-Band-Center-Engineered Platinum-Based Nanozyme for Personalized Pharmacovigilance.

A high-efficiency PtZnCd nanozyme was screened with density functional theory (DFT) and unique d-orbital coupling features for sensitive enrichment and real-time analysis of CO-releasing molecule-3 (CORM-3). Multicatalytic sites in the nanozyme showed a high reactivity of up to 72.89 min-1 for peroxidase (POD)-like reaction, which was 2.2, 4.07, and 14.67 times higher than that of PtZn (32.67 min-1), PtCd (17.89 min-1), and Pt (4.97 min-1), respectively. Normalization of the catalytic sites showed that the catalytic capacity of the active site in PtZnCd was 2.962 U µmol-1, which was four times higher than that of a pure Pt site (0.733 U µmol-1). DFT calculations showed that improved d-orbital coupling between different metals reduces the position of the center of the shifted whole d-band relative to the Fermi energy level, thereby increasing the contribution of the sites to the electron transfer from the active center, accompanied by enhanced substrate adsorption and intermediate conversion in the catalytic process. The potential adsorption principle and color development mechanism of CORM-3 on PtZnCd were determined, and its practical application in drug metabolism was validated in vitro and in zebrafish and mice models, demonstrating that transition-metal doping effectively engineers high-performance nanozymes and optimizes artificial enzymes.

Bifunctional TiO2 Nanoflower-Induced H4TCBPE Aggregation Enhanced Electrochemiluminescence for an Ultrasensitive Assay of Organophosphorus.

In this work, the aggregation-induced emission ligand 1,1,2,2-tetra(4-carboxylbiphenyl)ethylene (H4TCBPE) was rigidified in the Ti-O network to form novel electrochemiluminescence (ECL) emitter H4TCBPE-TiO2 nanospheres, which acted as an effective ECL emitter to construct an "on-off" ECL biosensor for ultrasensitive detection of malathion (Mal). H4TCBPE-TiO2 exhibited excellent ECL responses due to the Ti-O network that can restrict the intramolecular free motions within H4TCBPE and then reduce the nonradiative relaxation. Moreover, TiO2 can act as an ECL co-reaction accelerator to promote the generation of sulfate radical anion (SO4•-), which interacts with H4TCBPE in the Ti-O network to produce enhanced ECL response. In the presence of Mal, numerous ligated probes (probe 1 to probe 2, P1-P2) were formed and released by copper-free click nucleic acid ligation reaction, which then hybridized with hairpin probe 1 (H1)-modified H4TCBPE-TiO2-based electrode surface. The P1-P2 probes can initiate the target-assisted terminal deoxynucleoside transferase (TdTase) extended reaction to produce long tails of deoxyadenine with abundant biotin, which can load numerous streptavidin-functionalized ferrocenedicarboxylic acid polymer (SA-PFc), causing quenching of the ECL signal. Thus, the ultrasensitive ECL biosensor based on H4TCBPE-TiO2 ECL emitter and click chemistry-actuated TdTase amplification strategy presents a desirable range from 0.001 to 100 ng/mL and a detection limit low to 9.9 fg/mL. Overall, this work has paved an avenue for the development of novel ECL emitters, which has opened up new prospects for ECL biosensing.

Microelectromechanical Microsystems-Supported Photothermal Immunoassay for Point-of-Care Testing of Aflatoxin B1 in Foodstuff.

Accurate identification of acutely toxic and low-fatality mycotoxins on a large scale in a quick and cheap manner is critical for reducing population mortality. Herein, a portable photothermal immunosensing platform supported by a microelectromechanical microsystem (MEMS) without enzyme involvement was reported for point-of-care testing of mycotoxins (in the case of aflatoxin B1, AFB1) in food based on the precise satellite structure of Au nanoparticles. The synthesized Au nanoparticles with a well-defined, graded satellite structure exhibited a significantly enhanced photothermal response and were coupled by AFB1 antibodies to form signal conversion probes by physisorption for further target-promoted competitive responses in microplates. In addition, a coin-sized miniature NIR camera device was constructed for temperature acquisition during target testing based on advanced MEMS fabrication technology to address the limitation of expensive signal acquisition components of current photothermal sensors. The proposed MEMS readout-based microphotothermal test method provides excellent AFB1 response in the range of 0.5-500 ng g-1 with detection limits as low as 0.27 ng g-1. In addition, the main reasons for the efficient photothermal transduction efficiency of Au with different graded structures were analyzed by finite element simulations, providing theoretical guidance for the development of new Au-based photothermal agents. In conclusion, the proposed portable micro-photothermal test system offers great potential for point-of-care diagnostics for residents, which will continue to facilitate immediate food safety identification in resource-limited regions.

Cation Exchange Reaction-Mediated Photothermal and Polarity-Switchable Photoelectrochemical Dual-Readout Biosensor.

Cation exchange (CE) is a burgeoning method for controlled crystal synthesis; however, its applications in bioanalysis are still in their infancy. Herein, we explored the transformation of ZnIn2S4 in properties after the CE reaction with Cu2+ ions; furthermore, the discrepancy was employed to design a dual-readout detection system of photothermal and polarity-switchable photoelectrochemical (PEC) immunoassays to realize reliable detection of carcinoembryonic antigen (CEA). In the presence of CEA, the CuO nanoparticles (CuO NPs) employed as dual-signal response probes would bond to the microplates and be acidolyzed by HCl to release Cu2+, which could replace Zn2+ and In3+ via the CE reaction. After the CE reaction is completed, the photocurrent would switch from a weak anodic photocurrent to a cathode one by using a 635 nm laser as a signal amplifier, while the photothermal signal would be enhanced with 808 nm laser illumination. On the basis of the polarity-switchable PEC strategy, CEA could be accurately detected from 0.1 to 50 ng mL-1 with a limit of detection (LOD) of 48 pg mL-1 (S/N = 3). Moreover, the photothermal assay for CEA detection possesses a linear range from 0.5 to 100 ng mL-1 with a LOD of 0.21 ng mL-1. In addition, the designed sensing platform only relies on devices with portability that are permitted for point-of-care detection.

Photoinduced Electron Transfer Modulated Photoelectric Signal: Toward an Organic Small Molecule-Based Photoelectrochemical Platform for Formaldehyde Detection.

Photoelectrochemical (PEC) sensing has been rapidly evolving in recent years, while the introduction of small molecules with specific recognition functions into the sensing interface remains a nascent area of study. In this work, we reported a PEC biosensor for formaldehyde (FA) detection based on photoinduced electron transfer (PET)-gated electron injection between organic small molecules and inorganic semiconducting substrates. Specifically, an FA-responsive probe (NA-FA-COOH) and TiO2 nanoarrays were integrated to construct a PEC platform (NFC/TiO2) via a coordination bond. NFC served simultaneously as a target-specific recognition element and a modulator of photoinduced electron injection. Treatment of NFC/TiO2 by FA would suppress the intramolecular PET process, with the quenched photocurrent signal due to the changed carrier transfer pathway, thus establishing the PEC platform for FA based on effective PET modulation. The proposed PEC system exhibited high selectivity and sensitivity, with a low detection limit of 0.071 µM. This study presents a novel perspective on the use of organic small molecules with a PET effect for advanced PEC bioanalysis.

Ultrasensitive and Specific Phage@DNAzyme Probe-Triggered Fluorescent Click Chemistry for On-Site Detection of Foodborne Pathogens Using a Smartphone.

Rapid, specific, and on-site detection of virulent foodborne pathogenic strains plays a key role in controlling food safety. In this work, an ultrasensitive and specific Phage@DNAzyme signal probe was designed to detect foodborne pathogens. The proposed sensing probe was composed of the selected phage and functionalized DNAzyme, which realized the specific recognition of target foodborne pathogens at the strain level and the efficient catalysis of copper(II) based azide-alkyne cycloaddition (CuAAC) click reaction with fluorescent signal, respectively. As a proof of concept, the virulent Escherichia coli O157:H7 (E. coli O157:H7) as the representative analyte was first enriched and purified from the complex food samples by a 4-mercaptophenylboronic acid-modified gold slide. Following, the Phage@DNAzyme probes were specifically combined with the captured E. coli O157: H7 and catalyzed the click reaction between 3-azido-7-hydroxycoumarin and 3-butyn-1-ol with the assistance of Cu(II) to generate a visual fluorescent signal. Finally, the corresponding fluorescent signals were measured by a smartphone to quantify the target concentrations. Under optimized conditions, the bioassay exhibited a wide linear range from 102 to 108 CFU/mL and the detection limit was 50 CFU/mL (S/N = 3). It was further extended to the detection of another foodborne pathogen Salmonella typhimurium with satisfying sensing performances. This work gives a new path for developing rapid, specific, and on-site detection methods for trace levels of pathogenic strains in foods.

Multifunctional Nanoprobe Based on Fluorescence Resonance Energy Transfer for Furin Detection and Drug Delivery.

Triple-negative breast cancer is particularly difficult to treat because of its high degree of malignancy and poor prognosis. A fluorescence resonance energy transfer (FRET) nanoplatform plays a very important role in disease diagnosis and treatment due to its unique detection performance. Combining the properties of agglomeration-induced emission fluorophore and FRET pair, a FRET nanoprobe (HMSN/DOX/RVRR/PAMAM/TPE) induced by specific cleavage was designed. First, hollow mesoporous silica nanoparticles (HMSNs) were used as drug carriers to load doxorubicin (DOX). HMSN nanopores were coated with the RVRR peptide. Then, polyamylamine/phenylethane (PAMAM/TPE) was combined in the outermost layer. When Furin cut off the RVRR peptide, DOX was released and adhered to PAMAM/TPE. Finally, the TPE/DOX FRET pair was constituted. The overexpression of Furin in the triple-negative breast cancer cell line (MDA-MB-468 cell) can be quantitatively detected by FRET signal generation, so as to monitor cell physiology. In conclusion, the HMSN/DOX/RVRR/PAMAM/TPE nanoprobes were designed to provide a new idea for the quantitative detection of Furin and drug delivery, which is conducive to the early diagnosis and treatment of triple-negative breast cancer.