RESUMO
This study aimed to optimize the solid-state hydrogenogenic stage supplemented with biomass fly ash in a two-stage anaerobic digestion (AD) process for biohythane production from the organic fraction of municipal solid waste (OFMSW). Doehlert's experimental design was used to obtain the optimal set of two investigated variables, namely total solids (TS) content and biomass fly ash dosage in the defined ranges of 0-20 g/L and 20-40%, respectively. Applying the optimal conditions of TS content (29.1%) and fly ash dosage (19.2 g/L) in the first stage led not only to a total H2 yield of 95 mL/gVSadded, which was very close to the maximum H2 yield predicted by the developed model (97 mL/gVSadded), but also to a high CH4 yield of 400 mL/gVSadded (76% of the theoretical CH4 yield). Moreover, the biohythane obtained from the optimized two-stage process met the standards of a biohythane fuel with an H2 content of 19% v/v.
Assuntos
Cinza de Carvão , Hidrogênio , Fermentação , Biomassa , Metano , Resíduos Sólidos , Anaerobiose , Reatores BiológicosRESUMO
Slaker grits (SG) and biomass fly ash (BFA), two waste streams generated in the pulp and paper industry, are commonly disposed of in landfills, a practice with a high economic and environmental burden. In this work, their individual valorization as fillers in a commercial screed mortar formulation was evaluated in order to achieve a more sustainable management practice. The waste streams were characterized in terms of true density, particle size and morphology, and chemical and mineralogical composition. The influence of their incorporation amount (5.0, 7.5, and 10.0 wt.% of the total solids) and pre-treatment (sieving and grinding) on the fresh (workability) and hardened state (density, water absorption by capillarity, and flexural and compressive strength) properties of the mortars were assessed. The results show that the addition of 10.0 wt.% of the SG after milling and sieving (<75 µm) and 7.5 wt.% of BFA in the as-received condition, or up to 10.0 wt.% after grinding and sieving (<63 µm), allowed for the production of mortar samples with properties within the recommended specifications and that were resistant to 25 consecutive freeze-thaw cycles. This waste valorization route could represent an economic benefit of up to 8.85 /tmortar and 2.87 /tmortar for mortar, and pulp and paper companies, respectively.
Assuntos
Cinza de Carvão , Materiais de Construção , Cinza de Carvão/química , Biomassa , Tamanho da Partícula , Força CompressivaRESUMO
In anaerobic digestion processes, pH has a vital role due to the direct impacts on the microbial community. An eco-friendly approach has been applied to control pH in anaerobic bioreactors, using waste-containing fly ash geopolymer spheres (GS) instead of powdered chemical compounds, to promote continuous alkalis leaching. The influence of GS porosity and concentration on the behavior of anaerobic sequential batch reactor treating cheese whey was evaluated. Results showed that the use of GS with the highest concentration and porosity promoted an increase in methane yield up to 30%, compared to the assay with powdered chemical compounds addition. In addition, GS boosted butyric acid production to the detriment of propionic acid, which favored methane production by a factor up to 1.2. This innovative approach indicates that GS addition can regulate pH in anaerobic digesters treating challenging wastewaters and, simultaneously, improve not only its efficiency but also the sustainability of the entire process.
Assuntos
Reatores Biológicos , Microbiota , Esgotos/microbiologia , Eliminação de Resíduos Líquidos , AnaerobioseRESUMO
During the past decades, pressures on global environment and energy security have led to an increasing demand on renewable energy sources and diversification of the world's energy supply. The Portuguese energy strategy considers the use of Forest Biomass Residues (FBR) to energy as being essential to accomplish the goals established in the National Energy Strategy for 2020. However, despite the advantages pointing to FBR to the energy supply chain, few studies have evaluated the potential impacts on air quality. In this context, a case study was selected to estimate the atmospheric emissions of the FBR to the energy supply chain in Portugal. Results revealed that production, harvesting, and energy conversion processes are the main culprits for the biomass energy supply chain emissions (with a contribution higher than 90%), while the transport processes have a minor importance for all the pollutants. Compared with the coal-fired plants, the FBR combustion produces lower greenhouses emissions, on a mass basis of fuel consumed; the same is true for NOX and SO2 emissions.
RESUMO
Biohythane, a balanced mixture comprising bioH2 (biohydrogen) and bioCH4 (biomethane) produced through anaerobic digestion, is gaining recognition as a promising energy source for the future. This article provides a comprehensive overview of biohythane production, covering production mechanisms, microbial diversity, and process parameters. It also explores different feedstock options, bioreactor designs, and scalability challenges, along with techno-economic and environmental assessments. Additionally, the article discusses the integration of biohythane into waste management systems and examines future prospects for enhancing production efficiency and applicability. This review serves as a valuable resource for researchers, engineers, and policymakers interested in advancing biohythane production as a sustainable and renewable energy solution.
RESUMO
The work describes the combination of granulated biomass fly ash (GBFA) with Fenton process to enhance the removal of adsorbable organic halides (AOX) from pulp bleaching wastewater. At optimal operating conditions, wastewater's chemical and biochemical oxygen demand (COD and BOD5, respectively) and colour were also quantified, and operating cost of treatment assessed. For the first time, raw pulp bleaching wastewater was used to granulate BFA, instead of water, reducing the water footprint of the treatment. Five wastewater treatment setups were studied: (i) conventional Fenton process; (ii) GBFA application; (iii) simultaneous application of GBFA and Fenton process; (iv) sequential treatment by GBFA followed by Fenton process; (v) sequential treatment by Fenton process followed by GBFA. The latter yielded the highest AOX removal (60-70%), whilst COD was also reduced (≈15%) and wastewater biodegradability (BOD5/COD) was enhanced from 0.075 to a maximum of 0.134. Another positive feature of the proposed solution was that GBFA were successfully recovered and reused without regeneration, yielding similar AOX removal compared with fresh GBFA. The operating cost of removing 1 g of AOX from the pulp bleaching wastewater by the optimal treatment setup (60-70% removal of AOX) was 14-26% lower than the operating cost of conducting Fenton process alone (50% removal of AOX).
Assuntos
Poluentes Químicos da Água , Purificação da Água , Águas Residuárias , Cinza de Carvão , Biomassa , Peróxido de Hidrogênio , Oxirredução , Eliminação de Resíduos LíquidosRESUMO
In the last decades, the cultivation of quinoa and lupin became an important source of income for Andean farmers due to the demand for high nutrient-density foods from the Global North. The increase in the cultivation intensity caused by this exogenous demand led to the overexploitation of local ecosystems and a decrease in soil fertility. As an alternative to recover and improve soil quality, this work uses a pilot-scale auger pyrolysis reactor, implemented in the Andes, to assess the conversion of the agro residues generated in the post-harvesting processes of quinoa and lupin into biochar for soil amendment. Following the European Biochar Certificate guidelines, the pyrolyzed quinoa stems can be classified as biochar while the pyrolyzed quinoa husks can be classified as pyrogenic carbonaceous material. Both can be used for soil amendment considering their molar ratios (H/Corg, O/Corg) and carbon content. It was not possible to carbonize lupin stems and seedcases. Despite the altitude (2,632 m.a.s.l), the CO concentration during the carbonization of quinoa stems and husks were 1,024.4 and 559 mg/Nm3, this last, near the European eco-design standard of 500 mg/Nm3. A subsequent SWOT analysis showed the need to explore low-cost and low-complexity pyrolysis reactors that allow the decentralized conversion of agro residues at the farm-scale. The development of local standards to regulate the production and use of biochar is also essential to grant the safety of the processes, the quality of the products, and mobilize funds that allow implementation at relevant scales.
RESUMO
There is a growing need to recover degraded soils to restore their essential ecosystem services and limit damages of anthropic activities onto these systems. Safe and sustainable solutions for long-term recovery must be designed, ideally by recycling existing resources. Using ash from combustion of residual forest biomass at the pulp and paper industry is an interesting and sustainable strategy to recover mining soils. However, formulations must be found to limit the potential toxicity associated with soluble salts and chloride that ash contains. Here, we assessed the effectiveness of three field ash-based amendments for the recovery of three highly acidic soils from Portuguese abandoned mines. Three amendments were tested: an un-stabilized mixture of ash and biological sludge, granulated ash, and granulated ash mixed with composted sludge. One year after application in open field plots (in the scope of LIFE No_Waste project), soil health restoration was evaluated through (i) soil physico-chemical characterization and (ii) soil habitat functions though standardized ecotoxicological tests. This study highlights that stabilized materials provided nutrients, organic matter and alkalinity that corrected soil pH and decreased metal bioavailability, while controlling the release of soluble salts and chloride from ash. This soil improvement correlated with improved soil model organisms' reproduction and survival. For similar amendment, the native soil properties studied (as soil native electrical conductivity) affected the level of organism response. This work provides evidence that ash stabilization, formulation and supplementation with organic matter could be sustainable strategies to restore highly degraded mining soils and to recover their ecological functions. It further highlights the importance of analyzing combined effects on soil physico-chemical properties and ecological function recovery to assess restoration strategy efficiencies in complex multi-stressor environments.
Assuntos
Poluentes do Solo , Solo , Biomassa , Ecossistema , Mineração , Poluentes do Solo/análise , Poluentes do Solo/toxicidadeRESUMO
Recently, wood pellets have become a reliable and clean renewable fuel for residential heating, replacing fossil fuels and reducing greenhouse gas emissions. Wood pellets are normally produced in industrial pellet plants (centralised production), but decentralised small-scale local production also occurs. This study applies Life Cycle Assessment (LCA) to quantify and compare the environmental profile of one centralised and two decentralised alternatives for wood pellet production for residential heating in Portugal: (1) industrial wood pellets production (centralised), (2) wood pellets production at sawmills (decentralised) and (3) wood pellets production at households (decentralised). System boundaries include the stages of forest management, wood pellet production, wood pellet distribution and wood pellet energetic conversion. The impact results show that industrial pellet production ranks as the worst alternative, while pellet production at households has the best environmental profile for all the impact categories under study. However, the environmental impacts of pellet production at the sawmill do not differ greatly from those of the pellet production at households; they are 14 to 16% higher for global warming and fossil resources scarcity and 0.3 to 3% higher for the remaining impact categories. The worst environmental performance of the industrial pellet production alternative is mainly due to high electricity and diesel consumption during wood pellet production and the use of logging residues to generate heat for drying biomass feedstock. A sensitivity analysis was performed to evaluate the influence of changing the distance travelled during the transport of packed pellets to stores and sawdust to households. The results show changes in the environmental performance ranking, highlighting that for short distances, both decentralised alternatives can be more sustainable from an environmental perspective than the centralised alternative, but for larger distances, the pellet production at households should be avoided.
RESUMO
Municipal solid waste (MSW) management in dense urban areas is a challenge for municipalities, especially in developing countries, which commonly have deficient waste management. For example, the metropolitan region of Goiás State, Brazil, has 19 municipalities that dispose of about 72.5% of total MSW in unlicensed MSW final disposal facilities. Therefore, this study analysed the investment and operating costs, and revenues of a municipal solid waste management facility, projected for 20 years, shared among these 19 municipalities. The economic viability analysis, has shown that, regardless of the management facility type, MSW collection and transport are the most expensive cost components, accounting for about 60% of MSW management operating costs. For an Internal Rate of Return of 0%, anaerobic digestion is 11% more expensive (in total) than using community composting. For 2040 (last year), the monthly MSW management tariffs will vary between 3.5 and 10.8 R$·inhabitant-1·month-1, depending on the municipality. So, as the unit price of biowaste treatments lowers with waste quantities, for the municipalities with large biowaste quantities, anaerobic digestion becomes recommended for its economic attractiveness. This study can serve as a model for other municipalities in Brazil and elsewhere, helping public decision makers to establish a strategy for MSW management.
Assuntos
Eliminação de Resíduos , Gerenciamento de Resíduos , Brasil , Cidades , Resíduos SólidosRESUMO
The increasing use of forest biomass as a fuel for power plants due to environmental concerns will certainly increase the amount of woody biomass ash produced. Because of the environmental problems derived from woody biomass ash disposal, an important aspect for the sustainable development of the energy sector is the implementation of effective ash management strategies. The purpose of this study is to assess the environmental impacts of woody biomass ash landfarming for soil amelioration through a Life Cycle Assessment. The baseline scenario corresponds to the current most common practice of woody biomass ash management (landfilling), and two different landfarming alternatives were assessed: liming and fertilisation. Credits were given to the system due to the substitution of three traditional liming products and five traditional fertilisers. Woody biomass ash landfarming presented satisfactory performance in five impact categories under study in comparison to landfilling. When woody biomass ash was used for liming, the environmental savings were more pronounced when substituting hydrated lime. For potassium supply, the substitution of potassium nitrate by woody biomass ash presented the best environmental performance, while for phosphorus supply, the environmental savings were more pronounced substituting single superphosphate. However, in four impact categories, the environmental impacts of ash landfarming exceeded the impacts of ash landfilling, due to the emission to soil of nutrients and trace elements to soil. But this does not necessarily imply increased risks for the environment, as the potential pollutants leaching depends on their bioavailability in the soil.
Assuntos
Poluentes do Solo , Oligoelementos , Biomassa , Cinza de Carvão , Fertilizantes , Florestas , SoloRESUMO
Fly ash (FA) from biomass combustion and biological sludge (S), both wastes from the pulp and paper industry, were granulated in different proportions (90% FA+10% S, and 70% FA+30% S w/w, dry weight basis, dw) and used to recover the functionality of soils affected by mining activities (Aljustrel, Iberian Pyrite Belt), with and without the application of municipal solid waste compost (MSWC). Application doses of both mixtures were 2.5, 5.0 and 10% (w/w, dw). These materials corrected soil acidity to circumneutral values and increased extractable P and K concentrations. A significant increase in soil organic matter (from 0.6 to 0.8-1.5% w/w, dw) and N content (from 0.04 to 0.09-0.12% w/w, dw) was also observed, but only when MSWC was applied. The soil was already heavily contaminated with Cu, Pb and Zn and the application of amendments did not increase their pseudo-total concentrations. The CaCl2 extractable fractions of both Cu and Zn decreased to very low values. The improvement in soil quality, compared to fertilizer only treatment, was further evidenced by the increase in some soil enzymatic activities (dehydrogenase, ß-glucosidase and cellulase), with a better response for the granules with the higher proportion of biological sludge, as well as by the decrease in the soil-water extract toxicity towards different organisms (Daphnia magna, Thamnocephalus platyurus, and Pseudokirchneriella subcapitata). Agrostis tenuis germinated and grew during the first month only in the amended pots, but, after that, a considerable phytotoxic effect was evident. This was mainly attributed to salt stress or to some specific ionic toxicity. In conclusion, to establish a long-term plant cover in mining soils amended with biomass ash-based materials, the selection of plants with higher resistance to salinity and/or the stabilization of the amendments, to reduce their soluble salt content, is recommended.
Assuntos
Agrostis/metabolismo , Poluição Ambiental/prevenção & controle , Recuperação e Remediação Ambiental/métodos , Resíduos Industriais/análise , Poluentes do Solo/metabolismo , Solo/química , Agrostis/crescimento & desenvolvimento , Biodegradação Ambiental , Biomassa , Cinza de Carvão/análise , Mineração , PapelRESUMO
Wood-fuelled systems are commonly used all over the world for residential heating, and recently wood pellets have been replacing traditional firewood. This article presents an environmental life cycle assessment of five wood-based combustion systems for residential heating: i) a pellet stove using maritime pine pellets; a wood stove using ii) eucalyptus (Eucalyptus globulus Labill.) and iii) maritime pine (Pinus pinaster Ait.) split logs; and a fireplace using iv) eucalyptus and v) maritime pine split logs. The functional unit is 1â¯MJ of thermal energy for residential heating. System boundaries include four stages: (1) forest management; (2) pellet and wood split log production; (3) distribution; and (4) thermal energy generation. Environmental impacts were calculated for seven impact categories from the ReCiPe 2016 midpoint method, and a sensitivity analysis was performed using the Product Environmental Footprint (PEF) life cycle impact assessment method and modifying the distances travelled. Of the five heating systems analysed, the fireplace presents the worst performance for all the impact categories with the exception of freshwater eutrophication and marine eutrophication, when maritime pine split logs are burned in the fireplace. Comparing the pellet stove with the wood stove, neither system is better for all the impact categories analysed. Regarding sensitivity analysis, the use of an alternative characterisation method leads to similar trends in the results in comparison with those obtained from the ReCiPe method, while changes in transport distances do not affect the total impacts to a large extent.
RESUMO
Four types of pellets and three agro-fuels were chemically characterised and burned in a pellet stove. To assess the influence of the material composing the firebox and the combustion efficiency of distinct biomass heating devices in the composition of the bottom ashes, three of the pellets were also burned in a conventional woodstove and in a fireplace. Ashes were analysed for their C, H and N contents by an elemental analyser, whilst major and trace elements were quantified by inductively coupled plasma atomic-emission spectrometry and inductively coupled plasma mass spectrometry, respectively. The mineralogy of ashes was determined by X-ray powder diffraction. The European standard test was applied to samples to determine the leaching potential of major, minor and trace elements. The contents of major and trace elements in the different types of biomass presented enormous variations, which are reflected in dissimilar mineralogical and chemical compositions of the respective ashes. The leachable potential of several elements of environmental concern present in oxy-anionic form at the alkaline pH of biomass ashes were generally high in all samples. Concentrations of some elements in the leachates were in the range of values with classification of "hazardous materials" by the European legislation in what respects the acceptance of these wastes at landfills. Pellets made up of wood wastes and containing preservatives (chromated copper arsenate and ammoniacal copper arsenate) are of concern. Due to lower combustion efficiencies, the leachable potential for most of the trace elements in ashes from the woodstove, and especially from the fireplace, was lower than that of the pellet stove.
Assuntos
Cinza de Carvão/química , Biomassa , Modelos Químicos , Oligoelementos/análise , Madeira/química , Difração de Raios XRESUMO
Municipal solid waste (MSW) management is a pressing concern for Goiás State, Brazil. Of the state's 246 municipalities, only 16 send their waste to licensed landfills. This means that 93% of the cities in Goiás dispose of their MSW inappropriately, in dumps or unlicensed landfills. This practice poses a danger to both the environment and to public health. On this basis, the goal of this study was to survey potential landfill sites in Goiás. A geographic information system tool was used to first identify Goiás landfills and dumps and then examine them, to check whether they are located in legally restricted areas. This tool cross-references morphology, land use and occupancy, conservation of the environment, public health and population projections for 2040. It then outputs restriction-free areas that are suitable for landfill construction. The results indicate that, by 2040, Goiás will have 59,500â¯km2 available for landfills, i.e., 17% of the state's total area. Conversely, 60% of the state's geographical area will be off limits for landfill construction. The most urgent need is in the Goiânia Metropolitan area, which will be producing about 40%, of 6,850â¯tâ day-1, of the MSW generated in the state by 2040. This metropolitan area will have the smallest restriction-free area for landfill construction (832â¯km2). A total of 235 MSW final disposal facilities were identified in Goiás: 15 licensed landfills, 23 unlicensed landfills and 197 dumps. Of these, 15 are in permitted areas, 38 are in areas subject to approval and 182 are in restricted areas. These numbers highlight the need for Goiás municipalities to terminate and/or readjust landfills and unlicensed dumps and to set up new MSW management facilities that conform to the legal and environmental requirements and the expected population growth.
Assuntos
Sistemas de Informação Geográfica , Gerenciamento de Resíduos , Brasil , Cidades , Eliminação de Resíduos , Resíduos Sólidos , Instalações de Eliminação de ResíduosRESUMO
Combustion of residual forest biomass (RFB) derived from eucalypt (Eucalyptus globulus), pine (Pinus pinaster) and golden wattle (Acacia longifolia) was evaluated in a pilot-scale bubbling fluidised bed reactor (BFBR). During the combustion experiments, monitoring of temperature, pressure and exhaust gas composition has been made. Ash samples were collected at several locations along the furnace and flue gas treatment devices (cyclone and bag filter) after each combustion experiment and were analysed for their unburnt carbon content and chemical composition. Total suspended particles (TSP) in the combustion flue gas were evaluated at the inlet and outlet of cyclone and baghouse filter and further analysed for organic and elemental carbon, carbonates and 57 chemical elements. High particulate matter collection efficiencies in the range of 94-99% were observed for the baghouse, while removal rates of only 1.4-17% were registered for the cyclone. Due to the sand bed, Si was the major element in bottom ashes. Fly ashes, in particular those from eucalypt combustion, were especially rich in CaO, followed by relevant amounts of SiO2, MgO and K2O. Ash characteristics varied among experiments, showing that their inorganic composition strongly depends on both the biomass composition and combustion conditions. Inorganic constituents accounted for TSP mass fractions up to 40 wt%. Elemental carbon, organic matter and carbonates contributed to TSP mass fractions in the ranges 0.58-44%, 0.79-78% and 0.01-1.7%, respectively.
Assuntos
Biomassa , Dióxido de Silício , Carbono , Cinza de Carvão/química , Florestas , Incineração , Material ParticuladoRESUMO
An experimental study was conducted at field conditions in order to evaluate the effect of application of ash from biomass combustion on some soil fertility characteristics and plant growth. Application of 7.5 Mg ha-1 industrial fly ash (IA), domestic ash (DA), and a 50:50 mix of domestic ash (DA) and spent coffee grounds (SCG) was made in different soil parcels. Lolium perenne seeds were sown and the grown biomass was harvested and quantified after 60 days. Soil samples from each parcel were also collected after that period and characterized. Both soil and grown biomass samples were analyzed for Ca, Mg, Na, K, P, Fe, Mn, Zn, and Al contents. Soil pH was determined before and after amendment. All applications rose significantly soil pH. Domestic ash, whether combined with coffee grounds or not, proved to be efficient at supplying available macronutrients Ca, Mg, K, and P to the soil and also reducing availability of Al (more than industrial ash). However, it inhibited plant growth, even more when combined with spent coffee grounds. As regards to elemental abundance in plant tissue, both domestic ash treatments reduced Ca and enhanced Al contents, unlike industrial ash, which proved less harmful for the load applied in the soil. Hence, it was possible to conclude that application load should be a limiting factor for this management option for the studied materials.
Assuntos
Café , Eliminação de Resíduos , Poluentes do Solo , Biomassa , Cinza de Carvão , SoloRESUMO
Although bottom ash (BA) [or mixtures of bottom and fly ash (FA)] from clean biomass fuels is currently used as liming agent, additive for compost, and fertilizer on agricultural and forest soils in certain European countries, in several other countries most of the ashes are currently disposed in landfills. This is due to both a lack of a proper classification of the materials and of regulatory barriers.Chemical characterization including analysis of an array of potentially toxic elements (PTEs) proved that over 100,000 tons of BA currently landfilled every year in Portugal actually complied with legal limits for PTEs for soil fertilizers applied in other countries. Pot experiments were conducted, testing three dosages of BA and FA (1, 2.5, and 5%, in weight) in three mining soils with different properties. Additions of ash materials to soils led to an increase in the pore water pH relative to control pots (0% of ash added) and had a clear impact on DOC and on the solubilization of both macro- and micronutrients (notably Cu).The results from the case study using BA and FA from a Portuguese biomass thermal power plant demonstrate that it is imperative to further develop a regulatory framework to alleviate technological and environmental barriers for biomass ash utilization as raw material for fertilizers and/or soil liming agent, in accordance with the goals of the circular economy. A more harmonized view on how to assess the merits and risks of the re-use of these materials is also needed.
Assuntos
Cinza de Carvão , Florestas , Reciclagem , Biomassa , Europa (Continente) , Portugal , SoloRESUMO
Bottom and fly ashes streams collected along a year in several biomass thermal plants were studied. The bulk composition of ashes and other chemical characteristics that may impact soil application showed a high variability depending on the ash stream, combustion technology and ash management practice at the power plants. The acid neutralization capacity (ANC) and metal's availability for leaching at fixed pH 7 and 4 was performed according with EA NEN 7371, as a quick evaluation method to provide information on the long-term behavior of ashes, regarding heavy metals and also plant nutrients release. Also the pH dependence leachability study was performed according to CEN/TS 14429 for predicting the leaching behavior under different scenarios. Leachability profiles were established between pH 3 and 12, allowing to distinguish different solubility control phenomena of toxic heavy metals (Cu, Cr, Mn, Ni, Zn, Pb) as well as other salts (Ca, K, Mg, Na, Cl). The ANC of fly ashes at pH 4 (3.6-9.6 molH(+)/kg) were higher than that observed for the bottom ashes (1.2-2.1 molH(+)/kg). Ashes were also characterized for persistent organic pollutants (POP), such as polycyclic aromatic hydrocarbons (PAH) and paradibenzodioxines and furanes (PCDD/F). Contents were found to be much higher in fly ash than in bottom ash streams. None of the PAH levels did reach the current national limit value of sewage sludge application in soils or the guide value for ash in north European countries. However, PCDD/F contents, which are not regulated, varied from non-detectable levels to high amounts, regardless the level of loss on ignition (LOI) or unburned carbon content in fly ashes. Given the current ash management practices and possible use of blends of bottom and fly ash streams as soil conditioners resembles clear the urgent need to regulate ash utilization in soils, incorporating limit values both for heavy metals, PAH and PCDD/F.
Assuntos
Cinza de Carvão/análise , Dioxinas/análise , Metais Pesados/análise , Hidrocarbonetos Policíclicos Aromáticos/análise , Poluentes do Solo/análise , Gerenciamento de Resíduos , Biomassa , Incineração , Portugal , Centrais ElétricasRESUMO
This paper presents results about the characterisation of the biomass fly ashes sourced from a thermal power plant and from a co-generation power plant located in Portugal, and the study of new cement formulations incorporated with the biomass fly ashes. The study includes a comparative analysis of the phase formation, setting and mechanical behaviour of the new cement-fly ash formulations based on these biomass fly ashes. Techniques such as X-ray diffraction (XRD), X-ray fluorescence spectroscopy (XRF), thermal gravimetric and differential thermal analysis (TG/DTA), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and environmental scanning electron spectroscopy (ESEM) were used to determine the structure and composition of the formulations. Fly ash F1 from the thermal power plant contained levels of SiO(2), Al(2)O(3) and Fe(2)O(3) indicating the possibility of exhibiting pozzolanic properties. Fly ash F2 from the co-generation plant contained a higher quantity of CaO ( approximately 25%). The fly ashes are similar to class C fly ashes according to EN 450 on the basis of chemical composition. The hydration rate and phase formation are greatly dependant on the samples' alkali content and water to binder (w/b) ratio. In cement based mortar with 10% fly ash the basic strength was maintained, however, when 20% fly ash was added the mechanical strength was around 75% of the reference cement mortar. The fly ashes contained significant levels of chloride and sulphate and it is suggested that the performance of fly ash-cement binders could be improved by the removal or control of these chemical species.