RESUMO
Designing and synthesizing fullerene bisadducts with a higher-lying conduction band minimum is promising to further improve the device performance of tin-based perovskite solar cells (TPSCs). However, the commonly obtained fullerene bisadduct products are isomeric mixtures and require complicated separation. Moreover, the isomeric mixtures are prone to resulting in energy alignment disorders, interfacial charge loss, and limited device performance improvement. Herein, we synthesized single-isomer C60- and C70-based diethylmalonate functionalized bisadducts (C60BB and C70BB) by utilizing the steric-hindrance-assisted strategy and determined all molecular structures involved by single crystal diffraction. Meanwhile, we found that the different solvents used for processing the fullerene bisadducts can effectively regulate the molecular packing in their films. The dense and amorphous fullerene bisadduct films prepared by using anisole exhibited the highest electron mobility. Finally, C60BB- and C70BB-based TPSCs showed impressive efficiencies up to 14.51 and 14.28%, respectively. These devices also exhibited excellent long-term stability. This work highlights the importance of developing strategies to synthesize single-isomer fullerene bisadducts and regulate their molecular packing to improve TPSCs' performance.
RESUMO
Designing an efficient modification molecule to mitigate non-radiative recombination at the NiOx/perovskite interface and improve perovskite quality represents a challenging yet crucial endeavor for achieving high-performance inverted perovskite solar cells (PSCs). Herein, we synthesized a novel fullerene-based hole transport molecule, designated as FHTM, by integrating C60 with 12 carbazole-based moieties, and applied it as a modification molecule at the NiOx/perovskite interface. The in-situ self-doping effect, triggered by electron transfer between carbazole-based moiety and C60 within the FHTM molecule, along with the extended π conjugated moiety of carbazole groups, significantly enhances FHTM's hole mobility. Coupled with optimized energy level alignment and enhanced interface interactions, the FHTM significantly enhances hole extraction and transport in corresponding devices. Additionally, the introduced FHTM efficiently promotes homogeneous nucleation of perovskite, resulting in high-quality perovskite films. These combined improvements led to the FHTM-based PSCs yielding a champion efficiency of 25.58% (Certified: 25.04%), notably surpassing that of the control device (20.91%). Furthermore, the unencapsulated device maintained 93% of its initial efficiency after 1000 hours of maximum power point tracking under continuous one-sun illumination. This study highlights the potential of functionalized fullerenes as hole transport materials, opening up new avenues for their application in the field of PSCs.
RESUMO
Tin-based perovskite solar cells (TPSCs) have received increasing attention due to their low toxicity, high theoretical efficiency, and potential applications as wearable devices. However, the inherent fast and uncontrollable crystallization process of tin-based perovskites results in high defect density in the film. Meanwhile, when fabricated into flexible devices, the prepared perovskite film exhibits inevitable brittleness and high Young's modulus, seriously weakening the mechanical stability. In this work, we design and synthesize a cross-linkable fullerene, thioctic acid functionalized C60 fulleropyrrolidinium iodide (FTAI), which has multiple interactions with perovskite components and can finely regulate the crystallization quality of perovskite film. The obtained perovskite film shows an increased grain size and a more matched energy level with the electron transport material, effectively improving the carrier extraction efficiency. The FTAI-based rigid device achieves a champion efficiency of 14.91 % with enhanced stability. More importantly, the FTAI located at the perovskite grain boundaries could spontaneously cross-link during the perovskite annealing process, which effectively improves the conductivity and elasticity of grain boundaries, thereby giving the film excellent bending resistance. Finally, the FTAI-based wearable device yields a record efficiency of 12.35 % and displays robust bending durability, retaining about 90 % of the initial efficiency after 10,000 bending times.
RESUMO
Formamidinium (FA) lead iodide perovskite materials feature promising photovoltaic performances and superior thermal stabilities. However, conversion of the perovskite α-FAPbI3 phase to the thermodynamically stable yet photovoltaically inactive δ-FAPbI3 phase compromises the photovoltaic performance. A strategy is presented to address this challenge by using low-dimensional hybrid perovskite materials comprising guaninium (G) organic spacer layers that act as stabilizers of the three-dimensional α-FAPbI3 phase. The underlying mode of interaction at the atomic level is unraveled by means of solid-state nuclear magnetic resonance spectroscopy, X-ray crystallography, transmission electron microscopy, molecular dynamics simulations, and DFT calculations. Low-dimensional-phase-containing hybrid FAPbI3 perovskite solar cells are obtained with improved performance and enhanced long-term stability.
RESUMO
Recently, low-bandgap formamidinium lead iodide FAPbI3-based perovskites are of particular interest for high-performance perovskite solar cells (PSCs) due to their broad spectral response and high photocurrent output. However, to inhibit the spontaneous α-to-δ phase transition, 15-17% (molar ratio) of bromide and cesium or methylammonium incorporated into the FAPbI3 are indispensable to achieve efficient PSCs. In return, the high bromide content will increase bandgap and narrow the spectral response region. If simply reducing the bromide content, the corresponding PSCs exhibit inferior operational stability due to α-to-δ phase transition, interface degradation, and halide migration. Herein, we report a CsPbBr3-cluster assisted vertically bottom-up crystallization approach to fabricate low-bromide (1% â¼ 6%), α-phase pure, and MA-free FAPbI3-based PSCs. The clusters, in the size of several nanometers, could act as nuclei to facilitate vertical growth of high quality α-FAPbI3 perovskite crystals. Moreover, these clusters can show further intake by perovskite after thermal annealing, which improves the phase homogeneity of the as-prepared perovskite films. As a result, the corresponding mesoporous PSCs deliver a champion efficiency of 21.78% with photoresponse extended to 830 nm. Moreover, these devices show remarkably improved operational stability, retaining â¼82% of the initial efficiency after 1,000 h of maximum power point tracking under 1 sun condition.
RESUMO
Curvature prevalently exists in the world of carbon materials (e.g., fullerenes, buckyl bowls, carbon nanotubes, and onions), but traditional C2-addition mechanisms fail to elucidate the mechanism responsible for the formation of carbon curvature starting from a pentagonal carbon ring in currently available chemical-physical processes such as combustion. Here, we show a complete series of nascent pentagon-incorporating C5-C18 that are online produced in the flame of acetylene-cyclopentadiene-oxygen and in situ captured by C60 or trapped as polycyclic aromatic hydrocarbons for clarifying the growth of the curved subunit of C20H10. A mechanism regarding C1-substitution and C2-addition has been proposed for understanding the formation of curvature in carbon materials, as exemplified by the typical curved molecule containing a single pentagon completely surrounded by five hexagons. The present mechanism, supported by the intermediates characterized by X-ray crystallography as well as NMR, has been experimentally validated for the rational synthesis of curved molecule in the commercially useful combustion process.
RESUMO
Surface defect passivation and carrier injection regulation have emerged as effective strategies for enhancing the performance of perovskite light-emitting diodes (Pero-LEDs). It usually requires two functional molecules to realize defect passivation and carrier injection regulation separately. In other words, developing one single molecule possessing these capabilities remains challenging. Herein, we utilized π-conjugated fluorene derivatives as surface treatment materials, 9,9-Spirobi[fluorene] (SBF), 9,9-Spirobifluoren-2-yl-diphenylphosphine oxide (SPPO1), and 2,7-bis(diphenylphosphoryl)-9,9'-spirobifluorene (SPPO13), to investigate the influence of their chemical structure on device optoelectronic performance, especially for defect passivation and carrier injection regulation. Consequently, the passivation capability of double-bonded SPPO13 surpassed single-bonded SPPO1 and nonbonded SBF, which all showed excellent electron transport properties, enhancing electron injection. The maximum external quantum efficiencies (EQE) for Pero-LEDs treated with SBF, SPPO1, and SPPO13 were 8.13, 17.48, and 22.10%, respectively, exceeding that of the derivative-free device (6.55%). Notably, SPPO13-treated devices exhibited exceptional reproducibility, yielding an average EQE of 20.00 ± 1.10% based on 30 devices. This result emphasizes the potential of tailored fluorene derivatives for enhancing the device performance of Pero-LEDs.
RESUMO
The imperfect charge behavior at the interfaces of perovskite/electron-transport layer (ETL)/transparent conducting oxide (TCO) limits the further performance improvement of perovskite/silicon tandem solar cells. Herein, an indium tin oxide interlayer is deposited between ETL and TCO to address this issue. Specifically, the interlayer is prepared using an all-physical and H2O-free method, electron-beam evaporation, which can avoid any potential damage to the underlying perovskite and ETL layers. Moreover, the interlayer's composition can be readily tuned by changing the evaporator component, enabling authors to regulate the contact resistance and energy-level alignment of the ETL/TCO interface. Consequently, the resultant perovskite/silicon tandem solar cells exhibit an impressive power conversion efficiency (PCE) of 30.8% (certified 30.3%). Moreover, the device retains 98% of its initial PCE after continuous operation under ambient conditions for 1078 h, representing one of the most stable and efficient perovskite/silicon tandem solar cells.
RESUMO
Light-induced phase segregation is one of the main issues restricting the efficiency and stability of wide-bandgap perovskite solar cells (WBG PSCs). Small organic molecules with abundant functional groups can passivate various defects, and therefore suppress the ionic migration channels for phase segregation. Herein, a series of pyridine-derivative isomers containing amino and carboxyl are applied to modify the perovskite surface. The amino, carboxyl, and N-terminal of pyridine in all of these molecules can interact with undercoordinated Pb2+ through coordination bonds and suppress halide ions migration via hydrogen bonding. Among them, the 5-amino-3-pyridine carboxyl acid (APA-3) treated devices win the champion performance, enabling an efficiency of 22.35% (certified 22.17%) using the 1.68 eV perovskite, which represents one of the highest values for WBG-PSCs. This is believed to be due to the more symmetric spatial distribution of the three functional groups of APA-3, which provides a better passivation effect independent of the molecular arrangement orientation. Therefore, the APA-3 passivated perovskite shows the slightest halide segregation, the lowest defect density, and the least nonradiative recombination. Moreover, the APA-3 passivated device retains 90% of the initial efficiency after 985 h of operation at the maximum power point, representing the robust durability of WBG-PSCs under working conditions.
RESUMO
Tin-based perovskite solar cells (TPSCs) are attracting intense research interest due to their excellent optoelectric properties and eco-friendly features. To further improve the device performance, developing new fullerene derivatives as electron transporter layers (ETLs) is highly demanded. Four well-defined regioisomers (trans-2, trans-3, trans-4, and e) of diethylmalonate-C60 bisadduct (DCBA) are isolated and well characterized. The well-defined molecular structure enables us to investigate the real structure-dependent effects on photovoltaic performance. It is found that the chemical structures of the regioisomers not only affect their energy levels, but also lead to significant differences in their molecular packings and interfacial contacts. As a result, the devices with trans-2, trans-3, trans-4, and e as ETLs yield efficiencies of 11.69%, 14.58%, 12.59%, and 10.55%, respectively, which are higher than that of the as-prepared DCBA-based (10.28%) device. Notably, the trans-3-based device also demonstrates a certified efficiency of 14.30%, representing one of the best-performing TPSCs.
RESUMO
Perovskite solar cells (PSCs) have demonstrated over 25% power conversion efficiency (PCE) via efficient surface passivation. Unfortunately, state-of-the-art perovskite post-treatment strategies can solely heal the top interface defects. Herein, an ion-diffusion management strategy is proposed to concurrently modulate the top interfaces, buried interfaces, and bulk interfaces (i.e., grain boundaries) of perovskite film, enabling all-interface defect passivation. Specifically, this method is enabled by applying double interactive salts of octylammonium iodide (OAI) and guanidinium chloride (GACl) onto the 3D perovskite surface. It is revealed that the hydrogen-bonding interaction between OA+ and GA+ decelerates the OA+ diffusion and therefore forms a dimensionally broadened 2D capping layer. Additionally, the diffusion of GA+ and Cl- determines the composition of the bulk and buried interface of PSCs. As a result, n-inter-i-inter-p, i.e., five-layer structured PSCs can be obtained with a champion PCE of 25.43% (certified 24.4%). This approach also enables the substantially improved operational stability of perovskite solar cells.
RESUMO
Constructing 2D/3D perovskite heterojunctions is effective for the surface passivation of perovskite solar cells (PSCs). However, previous reports that studying perovskite post-treatment only physically deposits 2D perovskite on the 3D perovskite, and the bulk 3D perovskite remains defective. Herein, we propose Cl2-dissolved chloroform as a multifunctional solvent for concurrently constructing 2D/3D perovskite heterojunction and inducing the secondary growth of the bulk grains. The mechanism of how Cl2 affects the performance of PSCs is clarified. Specifically, the dissolved Cl2 reacts with the 3D perovskite, leading to Cl/I ionic exchange and Ostwald ripening of the bulk grains. The generated Cl- further diffuses to passivate the bulk crystal and buried interface of PSCs. Hexylammonium bromide dissolved in the solvent reacts with the residual PbI2 to form 2D/3D heterojunctions on the surface. As a result, we achieved high-performance PSCs with a champion efficiency of 24.21% and substantially improved thermal, ambient, and operational stability.
Assuntos
Compostos de Cálcio , Óxidos , Oxirredução , SolventesRESUMO
Wide-bandgap (WBG) perovskite solar cells suffer from severe non-radiative recombination and exhibit relatively large open-circuit voltage (VOC) deficits, limiting their photovoltaic performance. Here, we address these issues by in-situ forming a well-defined 2D perovskite (PMA)2PbCl4 (phenmethylammonium is referred to as PMA) passivation layer on top of the WBG active layer. The 2D layer with highly pure dimensionality and halide components is realized by intentionally tailoring the side-chain substituent at the aryl ring of the post-treatment reagent. First-principle calculation and single-crystal X-ray diffraction results reveal that weak intermolecular interactions between bulky PMA cations and relatively low cation-halide hydrogen bonding strength are crucial in forming the well-defined 2D phase. The (PMA)2PbCl4 forms improved type-I energy level alignment with the WBG perovskite, reducing the electron recombination at the perovskite/hole-transport-layer interface. Applying this strategy in fabricating semi-transparent WBG perovskite solar cells (indium tin oxide as the back electrode), the VOC deficits can be reduced to 0.49 V, comparable with the reported state-of-the-art WBG perovskite solar cells using metal electrodes. Consequently, we obtain hysteresis-free 18.60%-efficient WBG perovskite solar cells with a high VOC of 1.23 V.
RESUMO
HIGHLIGHTS: The modification of perovskite precursor by a series of phosphoryl chloride molecules can indeed improve the performance of perovskite LEDs (Pero-LEDs). The bis(2-oxo-3-oxazolidinyl) phosphinic chloride can not only regulate the phase distribution by controlling the crystallization rate but also passivate the defects of the quasi-2D perovskite. Highly efficient and reproducible Pero-LEDs are achieved with an maximum external quantum efficiency (EQEmax) of 20.82% and an average EQE (EQEave) of around 20% on 50 devices. Quasi-2D perovskites have attracted tremendous interest for application as light-emission layers in light-emitting diodes (LEDs). However, the heterogeneous n phase and non-uniform distribution still severely limit the further development of quasi-2D perovskite LEDs (Pero-LEDs). Meanwhile, the increased defect density caused by the reduced dimension and grain size induces non-radiative recombination and further deteriorates the device performance. Here, we found that a series of molecules containing phosphoryl chloride functional groups have noticeable enhancement effects on the device performance of quasi-2D Pero-LEDs. Then, we studied the modification mechanism by focusing on the bis(2-oxo-3-oxazolidinyl) phosphinic chloride (BOPCl). It is concluded that the BOPCl can not only regulate the phase distribution by decreasing the crystallization rate but also remain in the grain boundaries and passivate the defects. As a result, the corresponding quasi-2D Pero-LEDs obtained a maximum external quantum efficiency (EQEmax) of 20.82% and an average EQE (EQEave) of around 20% on the optimal 50 devices, proving excellent reproducibility. Our work provides a new selection of molecular types for regulating the crystallization and passivating the defects of quasi-2D perovskite films.
RESUMO
Fullerene derivatives are considered excellent materials for the extraction and transportation of electrons in the production of efficient tin-based perovskite solar cells (TPSCs). However, it is not clear how the molecular structure of fullerene derivatives affects the efficiency and stability of TPSCs. In this study, the effects of fullerene derivatives, (6,6)-phenyl-C61-butyric acid hexyl ester (PCBH) and (6,6)-phenyl-C61-butyric acid methyl ester (PCBM), with different functional groups, on photovoltaic performance were investigated. The flexible alkyl chain of PCBH effectively improved the film morphology and stability, the electron extraction and transport capabilities, and the interface contact of fullerene and perovskite. As a result, the PCBH-based TPSC yielded a higher efficiency, of 9.21%, than the PCBM-based devices (7.54%). More importantly, the PCBH-based films exhibited higher stability and effectively suppressed the oxidation of Sn2+ by inhibiting oxygen permeation. Therefore, the PCBH-based devices exhibited significantly enhanced stability. This result indicates that optimizing the functional group of fullerene derivatives is crucial for improving the efficiency and stability of TPSCs.
RESUMO
Understanding the function of moisture on perovskite is challenging since the random environmental moisture strongly disturbs the perovskite structure. Here, we develop various N2-protected characterization techniques to comprehensively study the effect of moisture on the efficient cesium, methylammonium, and formamidinium triple-cation perovskite (Cs0.05FA0.75MA0.20)Pb(I0.96Br0.04)3. In contrast to the secondary measurements, the established air-exposure-free techniques allow us directly monitor the influence of moisture during perovskite crystallization. We find a controllable moisture treatment for the intermediate perovskite can promote the mass transportation of organic salts, and help them enter the buried bottom of the films. This process accelerates the quasi-solid-solid reaction between organic salts and PbI2, enables a spatially homogeneous intermediate phase, and translates to high-quality perovskites with much-suppressed defects. Consequently, we obtain a champion device efficiency of approaching 24% with negligible hysteresis. The devices exhibit an average T80-lifetime of 852 h (maximum 1210 h) working at the maximum power point.
RESUMO
Fullerene-based electron-transporting layers (ETLs) significantly influence the defect passivation and device performance of inverted perovskite solar cells (PSCs). However, the π-cage structures of fullerenes lead to a strong tendency to self-aggregate, which affects the long-term stability of the corresponding PSCs. Experimental results revealed that [6,6]-phenyl-C61-butyric acid methyl ester (PCBM)-based ETLs exhibit a certain degree of self-aggregation that affects the stability of the device, particularly under continuous irradiation stress. To modulate the aggregation behavior, we replaced a methyl hydrogen of PCBM with a phenyl group to yield [6,6]-phenyl-C61-butyric acid benzyl ester (PCBB). As verified through X-ray crystallography, this minor structural modification results in more non-covalent intermolecular interactions, which effectively enhanced the electron-transporting ability of the PCBB-based ETL and led to an efficiency approaching 20%. Notably, the enhanced intermolecular forces of PCBB suppressed its self-aggregation, and the corresponding device showed significantly improved stability, retaining approximately 90% of its initial efficiency after 600 h under one-sun irradiation with maximum power point tracking. These findings provide a viable approach for the design of new fullerene derivatives to tune their intermolecular interactions to suppress self-aggregation within the ETL for high-performance PSCs.
RESUMO
Printable mesoscopic perovskite solar cells (PMPSCs) have exhibited great attractive prospects in the energy conversion field due to their high stability and potential scalability. However, the thick perovskite film in the mesoporous layers challenges the charge transportation and increase grain boundary defects, limiting the performance of the PMPSCs. It is critical not only to improve the electric property of the perovskite film but also to passivate the charge traps to improve the device performance. Herein we synthesized a bis-adduct 2,5-(dimethyl ester) C60 fulleropyrrolidine (bis-DMEC60) via a rational molecular design and incorporated it into the PMPSCs. The enhanced chemical interactions between perovskite and bis-DMEC60 improve the conductivity of the perovskite film as well as elevate the passivation effect of bis-DMEC60 at the grain boundaries. As a result, the fill factor (FF) and power conversion efficiency (PCE) of the PMPSCs containing bis-DMEC60 reached 0.71 and 15.21%, respectively, significantly superior to the analogous monoadduct derivative (DMEC60)-containing and control devices. This work suggests that fullerene derivatives with multifunctional groups are promising for achieving high-performance PMPSCs.
RESUMO
Work function of carbon electrodes is critical in obtaining high open-circuit voltage as well as high device performance for carbon-based perovskite solar cells. Herein, we propose a novel strategy to upshift work function of carbon electrode by incorporating boron atom into graphite lattice and employ it in printable hole-conductor-free mesoscopic perovskite solar cells. The high-work-function boron-doped carbon electrode facilitates hole extraction from perovskite as verified by photoluminescence. Meanwhile, the carbon electrode is endowed with an improved conductivity because of a higher graphitization carbon of boron-doped graphite. These advantages of the boron-doped carbon electrode result in a low charge transfer resistance at carbon/perovskite interface and an extended carrier recombination lifetime. Together with the merit of both high work function and conductivity, the power conversion efficiency of hole-conductor-free mesoscopic perovskite solar cells is increased from 12.4% for the pristine graphite electrode-based cells to 13.6% for the boron-doped graphite electrode-based cells with an enhanced open-circuit voltage and fill factor.
RESUMO
Inverted planar structure perovskite solar cells (PSCs), due to their low-temperature precessing and lack of hysteretic problems, are attracting increased attention by researchers around the world. Fullerene derivatives are the most widely used electron transport materials (ETMs) in inverted planar perovskite solar cells, especially [6,6]-phenyl-C61-butyric acid methylester (PC61BM), which exhibits very good performance. However, to the best of our knowledge, the influence of adducts on fullerene-based PSCs performance has not been fully explored to date. In this work, two fullerene derivatives, 2,5-(dimethyl ester) C60 fulleropyrrolidine (DMEC60) and the analogous C70 derivative (DMEC70), were synthesized in high yield via a 1,3-dipolar cycloaddition reaction at room temperature and incorporated into CH3NH3PbI3 perovskite solar cells as electron transport materials. Possibly because the attached pyrrolidine ester groups are able to coordinate with the perovskite layer, the devices based on DMEC60 and DMEC70 achieved power conversion efficiencies (PCE) of 15.2% and 16.4%, respectively. Not only were both devices' efficiencies higher than those based on PC61BM and PC71BM, but their stabilities were also higher than those for PCBM-based devices. The results suggest that DMEC60 and DMEC70 are better alternatives than PC61BM and PC71BM for the ETMs in PSCs.