Core-Sheath Heterogeneous Interlocked Conductive Fiber Enables Smart Textile for Personalized Healthcare and Thermal Management.

Whereas thermal comfort and healthcare management during long-term wear are essentially required for wearable system, simultaneously achieving them remains challenge. Herein, a highly comfortable and breathable smart textile for personal healthcare and thermal management is developed, via assembling stimuli-responsive core-sheath dual network that silver nanowires(AgNWs) core interlocked graphene sheath induced by MXene. Small MXene nanosheets with abundant groups is proposed as a novel "dispersant" to graphene according to "like dissolves like" theory, while simultaneously acting as "cross-linker" between AgNWs and graphene networks by filling the voids between them. The core-sheath heterogeneous interlocked conductive fiber induced by MXene "cross-linking" exhibits a reliable response to various mechanical/electrical/light stimuli, even under large mechanical deformations(100%). The core-sheath conductive fiber-enabled smart textile can adapt to movements of human body seamlessly, and convert these mechanical deformations into character signals for accurate healthcare monitoring with rapid response(440 ms). Moreover, smart textile with excellent Joule heating and photothermal effect exhibits instant thermal energy harvesting/storage during the stimuli-response process, which can be developed as self-powered thermal management and dynamic camouflage when integrated with phase change and thermochromic layer. The smart fibers/textiles with core-sheath heterogeneous interlocked structures hold great promise in personalized healthcare and thermal management.

Autonomous Electroluminescent Textile for Visual Interaction and Environmental Warning.

Visual interaction is a promising strategy for the externalized expression and transmission of information, having wide application prospects in wearable luminous textiles. Achieving an autonomous luminous display and dynamic light response to environmental stimuli is attractive but attracts little attention. Herein, we propose a liquid responsive structure based on alternating-current electroluminescent fibers and demonstrate conductive-liquid-bridging electroluminescent fabrics with high integration and personalized patterns. Impressively, our electroluminescent fibers and textiles could afford a sensitive response and high robustness to water, glycerol, ethanol, and sodium chloride solution. The final electroluminescent textiles show an excellent luminescence performance of 149.08 cd m-2. On the proof of concept, a rain-sensing umbrella, luminous sportswear, and liquid response glove are fabricated to demonstrate water detection, visual interaction, and environmental warning. The textile-type visualizing-responding strategy proposed in this work may open up new avenues for the application of ACEL devices in the field of visual interaction.

BRCA genes as candidates for colorectal cancer genetic testing panel: systematic review and meta-analysis.

BACKGROUND: Breast cancer susceptibility gene (BRCA) mutation carriers are at an increased risk for breast, ovarian, prostate and pancreatic cancers. However, the role of BRCA is unclear in colorectal cancer; the results regarding the association between BRCA gene mutations and colorectal cancer risk are inconsistent and even controversial. This study aimed to investigate whether BRCA1 and BRCA2 gene mutations are associated with colorectal cancer risk. METHODS: In this systematic review, we searched PubMed/MEDLINE, Embase and Cochrane Library databases, adhering to PRISMA guidelines. Study quality was assessed using the Newcastle-Ottawa Scale (NOS). Unadjusted odds ratios (ORs) were used to estimate the probability of Breast Cancer Type 1 Susceptibility gene (BRCA1) and Breast Cancer Type 2 Susceptibility gene (BRCA2) mutations in colorectal cancer patients. The associations were evaluated using fixed effect models. RESULTS: Fourteen studies were included in the systematic review. Twelve studies, including seven case-control and five cohort studies, were included in the meta-analysis. A significant increase in the frequency of BRCA1 and BRCA2 mutations was observed in patients with colorectal cancer [OR = 1.34, 95% confidence interval (CI) = 1.02-1.76, P = 0.04]. In subgroup analysis, colorectal cancer patients had an increased odds of BRCA1 (OR = 1.48, 95% CI = 1.10-2.01, P = 0.01) and BRCA2 (OR = 1.56, 95% CI = 1.06-2.30, P = 0.02) mutations. CONCLUSIONS: BRCA genes are one of the genes that may increase the risk of developing colorectal cancer. Thus, BRCA genes could be potential candidates that may be included in the colorectal cancer genetic testing panel.

Biomimetic Hierarchically Silver Nanowire Interwoven MXene Mesh for Flexible Transparent Electrodes and Invisible Camouflage Electronics.

Flexible transparent electrodes demand high transparency, low sheet resistance, as well as excellent mechanical flexibility simultaneously, however they still remain to be a great challenge due to"trade-off" effect. Herein, inspired by a hollow interconnected leaf vein, we developed robust transparent conductive mesh with biomimetic interwoven structure via hierarchically self-assembles silver nanowires interwoven metal carbide/nitride (MXene) sheets along directional microfibers. Strong interfacial interactions between plant fibers and conductive units facilitate hierarchically interwoven conductive mesh constructed orderly on flexible and lightweight veins while maintaining high transparency, effectively avoiding the trade-off effect between optoelectronic properties. The flexible transparent electrodes exhibit sheet resistance of 0.5 Ω sq-1 and transparency of 81.6%, with a remarkably high figure of merit of 3523. In addition, invisible camouflage sensors are further successfully developed as a proof of concept that could monitor human body motion signals in an imperceptible state. The flexible transparent conductive mesh holds great potential in high-performance wearable optoelectronics and camouflage electronics.

Wearable Sunlight-Triggered Bimorph Textile Actuators.

Photothermal bimorph actuators have attracted considerable attention in intelligent devices because of their cordless control and lightweight and easy preparation. However, current photothermal bimorph actuators are mostly based on films or papers driven by near-infrared sources, which are deficient in flexibility and adaptability, restricting their potential in wearable applications. Herein, a bimorph textile actuator that can be scalably fabricated with a traditional textile route and autonomously triggered by sunlight is reported. The active layer and passive layer of the bimorph are constructed by polypropylene tape and a MXene-modified polyamide filament. Because of the opposite thermal expansion and MXene-enhanced photothermal efficiency (>260%) of the bimorph, the textile actuator presents effective deformation (1.38 cm-1) under low sunlight power (100 mW/cm2). This work provides a new pathway for wearable sunlight-triggered actuators and finds attractive applications for smart textiles.

Customizable Textile Sensors Based on Helical Core-Spun Yarns for Seamless Smart Garments.

Most of the current sensors cannot meet the needs for seamless integration into the textile substrates of smart clothing and require improvements in terms of comfort and durability. Herein, smart textile-based sensors that have different sensing properties with integrated electronic elements were fabricated by knitting graphene-based helical conductive core-spun yarns. Such graphene-modified core-spun yarns are employed as building blocks of textile strain sensors, which showed high elasticity (ε > 300%), fast response time (120 ms), excellent reproducibility (over 10 000 cycles), wide sensing range (up to 100% strain), and low detection limit (0.3% strain). Thus, resistance-type strain sensors and capacitance-type pressure sensors composed of graphene-based smart fabric could be used to monitor large-scale limb movement and subtle human physiological signals. Such seamless smart textile-based fabric composed of superelastic helical conductive core-spun yarns shows great potential for fabricating an intelligent device to achieve real-time precise medicine and healthcare.

Touch-sensing fabric encapsulated with hydrogel for human-computer interaction.

Flexible touch-sensing devices have attracted extensive attention in wearable electronics and human-machine interaction. The ionic touch-sensing hydrogels are ideal candidates for these scenarios, but the absorbed water evaporates easily from the hydrogel, reducing their working time and stability. Herein, we propose a touch-sensing fabric system composed of non-woven cellulose fabrics as a sheath shell layer encapsulated with a hydrogel filling layer. The resultant touch-sensing fabric has a super-thin structure (1 mm) and exhibits a low detecting threshold (50 Pa), high durability (100k times), strain/pressure insensitivity and extremely high touch positioning accuracy. In the proof of concept, a smart touch-sensing glove is equipped with our fabric, which can execute human-computer interaction as a flexible touch-sensing device.

Zirconium-Metalloporphyrin Frameworks-Luminol Competitive Electrochemiluminescence for Ratiometric Detection of Polynucleotide Kinase Activity.

We propose a novel competitive mechanism involving the dissolved oxygen (O2) between zirconium-based porphyrinic metal-organic framework nanoparticles (NMOFs) and luminol into a ratiometric electrochemiluminescence (ECL) biosensing interface. Zinc tetrakis(carboxyphenyl)-porphyrin (ZnTCPP) in NMOFs as electron media reduce O2 into reactive oxygen species (ROS) and produce singlet oxygen (1O2), resulting in cathodic ECL. Meanwhile, ROS also react with the luminol anion radical and amplify the anodic ECL emission. Based on the competitive-mechanism-driven ECL process, taking the detection of polynucleotide kinase (PNK) as example, with assembling DNA-functionalized NMOFs on the sensing interface, a lower detection limit of 6.5 × 10-5 U mL-1 and broader linear relationship range from 0.0002 to 10 U mL-1 were obtained compared with that of single-signal-driven ECL sensors. This proposed MOFs-luminol competitive ECL mechanism involving dissolved O2 may provide a new pathway for further research of a green and highly sensitive ECL biosensing system.

Stretchable Conductive Fibers of Ultrahigh Tensile Strain and Stable Conductance Enabled by a Worm-Shaped Graphene Microlayer.

Stretchable electrical conductors have demonstrated promising potentials in a wide range of wearable electronic devices, but the conductivity of most reported stretchable conductive fibers will be changed if be stretched or strained. Stable conductance is essential for wearable and stretchable devices, to ensure the performance is stable. Inspired by the peristaltic behavior of arthropods, we designed a graphene coating similar to the caterpillar structure on the polyurethane (PU) fiber surface, enabled by coating the worm-shaped graphene microlayer onto polyurethane filaments. Such worm-shaped filaments can be stretched up to 1010% with a wide reversible electroresponse range (0 < ε < 815%), long-term durability (>4000 stretching/releasing cycles), good initial conductivity (σ0 = 124 S m-1), and high quality factor (Q = 11.26). Remarkably, the worm-shaped filaments show distinctive strain-insensitive behavior (ΔR/R0 < 0.1) up to 220% strain. Furthermore, the filaments as electrical circuits of light emitting diodes (LEDs) to track signals from robust human joint movements are also demonstrated for practical application. Such worm-shaped filaments with distinctive strain-insensitive behavior provide a direct pathway for stretchy electronics.

Continuous and Segmented Semiconducting Fiber-like Nanostructures with Spatially Selective Functionalization by Living Crystallization-Driven Self-Assembly.

Fiber-like π-conjugated nanostructures are important components of flexible organic electronic and optoelectronic devices. To broaden the range of potential applications, one needs to control not only the length of these nanostructures, but the introduction of diverse functionality with spatially selective control. Here we report the synthesis of a crystalline-coil block copolymer of oligo(p-phenylenevinylene)-b-poly(2-vinylpyridine) (OPV5 -b-P2VP44 ), in which the basicity and coordinating/chelating ability of the P2VP segment provide a landscape for the incorporation of a variety of functional inorganic NPs. Through a self-seeding strategy, we were able to prepare monodisperse fiber-like micelles of OPV5 -b-P2VP44 with lengths ranging from 50 to 800 nm. Significantly, the exposed two ends of OPV core of these fiber-like micelles remained active toward further epitaxial deposition of OPV5 -b-PNIPAM49 and OPV5 -b-P2VP44 to generate uniform A-B-A and B-A-B-A-B segmented block comicelles with tunable lengths for each block. The P2VP domains in these (co-)micelles can be selectively decorated with inorganic and polymeric nanoparticles as well as metal oxide coatings, to afford hybrid fiber-like nanostructures. This work provides a versatile strategy toward the fabrication of narrow length dispersity continuous and segmented π-conjugated OPV-containing fiber-like micelles with the capacity to be decorated in a spatially selective way with varying functionalities.

Graphene Oxide/Chitosan/Polyvinyl-Alcohol Composite Sponge as Effective Adsorbent for Dyes.

Water pollution is one of the most pervasive problems afflicting people. Therefore, seeking highly efficient, low-cost methods to decontaminate water is very much in demand. In this paper, chitosan/polyvinyl-alcohol composite sponges are synthesized via foamed cross-linking method while incorporating different amount of graphene oxide, the resultant graphene oxide/chitosan/polyvinyl-alcohol composite sponges (GCS) are characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Fourier transform infrared (FTIR), indicating the reasonable dispersion of graphene oxide in the matrix. Furthermore, some physical properties (water absorption, water retention, apparent density, porosity) are also determined; water absorption is high up to 873%, apparent density is lower than 0.25 g/cm3, and porosity could reach 78%. The GCSs also manifest high adsorption ability, as effective adsorbent for Acid Red 37 (AR 37) solution. The relationship between adsorption capacity and independent variables (adsorbent mass, initial dye concentration, and contacting time) is obtained. The optimal adsorption capacity value of AR 37 on GCS could reach 421.5 mg/g.

Preparation of Three-Dimensional Chitosan-Graphene Oxide Aerogel for Residue Oil Removal.

Graphene oxide has been used as an adsorbent in wastewater treatment. However, the hydrophily and dispersibility in aqueous solution limit its practical application in environmental protection. In this paper, a novel, environmentally friendly adsorbent, chitosan and chitosan-graphene oxide aerogels with a diverse shape, large specific surface area, and unique porous structure were prepared by a freeze-drying method. The structure of the adsorbents was investigated using scanning electron microscopy, Fourier transform-infrared spectroscopy, and X-ray diffraction (XRD); the specific surface area and swelling capability were also characterized. In addition, removal of diesel oil from seawater by chitosan aerogel (CSAG) and chitosan-graphene oxide aerogel (AGGO-1 and AGGO-2) was studied and batch adsorption experiments were carried out as a function of different adsorbent dosages (0-6 g), contact time (0-120 minutes), pH (3-9), and initial concentrations of oil residue (3-30 g/L) to determine the optimum condition for the adsorption of residue oil from seawater. The results showed that the chitosan-graphene oxide aerogels were more effective to remove diesel oil from seawater compared with pure chitosan aerogel. A removal efficiency ≥ 95% of the chitosan-graphene oxide aerogels could be achieved easily at the initial concentrations of 20 g/L, which indicated that the chitosan-graphene oxide aerogels can be used to treat the industrial oil leakage or effluent in the natural water.

Chitosan/Graphene Oxide Composite as an Effective Adsorbent for Reactive Red Dye Removal.

Chitosan, modified with different dosages of graphene oxide (GO) and reduced graphene oxide (rGO), was first prepared, and its adsorption capacity for reactive red (RR) dye in aqueous solutions was investigated, in this paper. The structure and morphology of the adsorbents were characterized by FT-IR, XRD, SEM, EDX, BET, and TGA. The effect of varying parameters (pH, temperature, adsorbent loading, and contact time) was also investigated. The maximum adsorption capacity based on the Langmuir model was found to be 32.16 mg/g. In addition, experimental kinetic data were analyzed by the psuedo-first order and psuedo-second order equation models. The psuedo-second order model proved to be the best model for the adsorption system, which suggested that adsorption might be controlled by the chemical rate-limiting step through sharing of electrons or by covalent forces.

Construction of three-dimensional proton-conduction networks with functionalized PU@PAN/UiO-66 nanofibers for proton exchange membranes.

Proton exchange membranes (PEMs) play an important role in fuel cells. For realizing a nanofiber (NF) structure design in PEMs, the material should have tunable pores and a high specific area. In this study, we attempt to design a novel NF with synergistic architecture doped MOF for constructing three-dimensional (3D) proton conduction networks in PEMs. In this framework, UiO-66-COOH serves as a platform for proton sites to synergistically promote proton conductivity via polyvinylpyrrolidone dissolution, hydrolyzation of polyacrylonitrile, and sulfamic acid functionalization of the shell-layer NF. Benefiting from enriched proton-transfer sites in NFs, the obtained composite membrane overcomes the trade-off among proton conductivity, methanol permeability, and mechanical stability. The composite membrane with 50 % fiber (Nafion/S@NF-50) exhibited a high proton conductivity of 0.212 S cm-1 at 80 °C and 100 % relative humidity, suppressed methanol permeability of 0.66 × 10-7 cm2 s-1, and the maximum power density of direct methanol fuel cell is 182.6 mW cm-2. Density functional theory was used to verify the important role of sulfamic acid in proton transfer, and the activation energy barriers under anhydrous and hydrous conditions are only 0.337 and 0.081 kcal, respectively. This study opens up new pathways for synthesizing NF composite PEMs.

Maximizing Degumming Efficiency for Firmiana simplex Bark Using Deep Eutectic Solvents.

Degumming is a critical process in the purification of natural fibers, essential for enhancing their quality and usability across various applications. Traditional degumming methods employed for natural fibers encounter inherent limitations, encompassing prolonged procedures, excessive energy consumption, adverse environmental impact, and subpar efficiency. To address these challenges, a groundbreaking wave of degumming technique has emerged, transcending these constraints and heralding a new era of efficiency, sustainability, and eco-friendly techniques. This study represents the Firmiana simplex bark (FSB) fiber's delignification by using deep eutectic solvents (DESs). The study explores the application of deep eutectic solvents, by synthesizing different types of DES using a hydrogen bond acceptor (HBA) and four representative hydrogen bond donors (HBDs) for FSB fiber degumming. This study investigates the morphologies, chemical compositions, crystallinities, and physical properties of Firmiana simplex bark fibers before and after the treatment. Furthermore, the effects and mechanisms of different DESs on dispersing FSB fibers were examined. The experimental results showed that choline chloride-urea (CU)-based DES initiates the degumming process by effectively disrupting the hydrogen bond interaction within FSB fibers, primarily by outcompeting chloride ions. Following this initial step, the DES acts by deprotonating phenolic hydroxyl groups and cleaving ß-O-4 bonds present in diverse lignin units, thereby facilitating the efficient removal of lignin from the fibers. This innovative approach resulted in significantly higher degumming efficiency and ecofriendly as compared to traditional methods. Additionally, the results revealed that CU-based DES exhibits the utmost effectiveness in degumming FSB fibers. The optimal degumming conditions involve a precise processing temperature of 160 °C and a carefully controlled reaction time of 2 h yielding the most favorable outcomes. The present study presents a novel straightforward and environmentally friendly degumming method for Firmiana simplex bark, offering a substantial potential for enhancing the overall quality and usability of the resulting fibers. Our findings open new pathways for sustainable fiber-processing technologies.

Electronic Skin Based on Polydopamine-Modified Superelastic Fibers with Superior Conductivity and Durability.

Owing to their excellent elasticities and adaptability as sensing materials, ionic hydrogels exhibit significant promise in the field of intelligent wearable devices. Nonetheless, molecular chains within the polymer network of hydrogels are susceptible to damage, leading to crack extension. Hence, we drew inspiration from the composite structure of the human dermis to engineer a composite hydrogel, incorporating dopamine-modified elastic fibers as a reinforcement. This approach mitigates crack expansion and augments sensor sensitivity by fostering intermolecular forces between the dopamine on the fibers, the hydrogel backbone, and water molecules. The design of this composite hydrogel elevates its breaking tensile capacity from 35 KJ to 203 KJ, significantly enhancing the fatigue resistance of the hydrogel. Remarkably, its electrical properties endure stability even after 2000 cycles of testing, and it manifests heightened sensitivity compared to conventional hydrogel configurations. This investigation unveils a novel method for crafting composite-structured hydrogels.

Exploring the versatility of biodegradable biomass aerogels: In-depth evaluation of Firmiana simplex bark microfibers depolymerized by deep eutectic solvent.

In this study, we investigated the use of deep eutectic solvents (DESs) at different molar ratios and temperatures as a green and efficient approach for microfibers (MFs) extraction. Our approach entailed the utilization of Firmiana simplex bark (FSB) fibers, enabling the production of different dimensions of FSB microfibers (FSBMFs) by combining DES pretreatment and mechanical disintegration technique. The proposed practice demonstrates the simplicity and effectiveness of the method. The morphology of the prepared microfibers was studied using the Scanning electron microscopic (SEM) technique. Additionally, the results revealed that the chemical and mechanical treatments did not significantly alter the well-preserved cellulose structure of microfibers, and a crystallinity index of 56.6 % for FSB fibers and 63.8 % for FSBMFs was observed by X-ray diffraction (XRD) analysis. Furthermore, using the freeze-drying technique, FSBMFs in water solutions produced effective aerogels for air purification application. In comparison to commercial mask (CM), FSBMF aerogels' superior hierarchical cellular architectures allowed them to attain excellent filtration efficiencies of 94.48 % (PM10) and 91.51 % (PM2.5) as well as excellent degradation properties were analyzed. The findings show that FSBMFs can be extracted from Firmiana simplex bark, a natural cellulose-rich material, using DES for environmentally friendly aerogel preparation and applications.

From farm to function: Exploring new possibilities with jute nanocellulose applications.

Recent scientific interest has surged in the application of bioresources within nanotechnology, primarily because of their eco-friendly nature, wide availability, and cost-effectiveness. Jute is globally recognized as the second most prevalent source of natural cellulose fibers, and it produces a significant quantity of jute sticks as a byproduct. Nanocellulose (NC), which includes cellulose nanofibrils (CNF) and cellulose nanocrystals (CNC), exhibits exceptional properties such as high strength, toughness, crystallinity, thermal stability, and stiffness. These attributes enable its versatile use across various sectors. The extensive surface areas and abundant hydroxyl groups of nanocellulose allow for diverse surface modifications, facilitating the design of advanced functional materials. This comprehensive review provides an overview of recent advancements in the synthesis, characterization, and potential applications of nanocellulose derived from jute. As a versatile natural fiber, jute holds immense potential across various research domains, including nanocellulose synthesis, scaffold fabrication, nanocarbon material preparation, life sciences, electronics and energy storage devices, drug delivery systems, nanomaterial synthesis, food packaging and paper industries. Additionally, its use extends to polymeric nanocomposites, sensors, and coatings. This study summarizes the extensive utilization of jute, emphasizing its versatility and potential across diverse research fields.

Underwater Gesture Recognition Meta-Gloves for Marine Immersive Communication.

Rapid advancements in immersive communications and artificial intelligence have created a pressing demand for high-performance tactile sensing gloves capable of delivering high sensitivity and a wide sensing range. Unfortunately, existing tactile sensing gloves fall short in terms of user comfort and are ill-suited for underwater applications. To address these limitations, we propose a flexible hand gesture recognition glove (GRG) that contains high-performance micropillar tactile sensors (MPTSs) inspired by the flexible tube foot of a starfish. The as-prepared flexible sensors offer a wide working range (5 Pa to 450 kPa), superfast response time (23 ms), reliable repeatability (∼10000 cycles), and a low limit of detection. Furthermore, these MPTSs are waterproof, which makes them well-suited for underwater applications. By integrating the high-performance MPTSs with a machine learning algorithm, the proposed GRG system achieves intelligent recognition of 16 hand gestures under water, which significantly extends real-time and effective communication capabilities for divers. The GRG system holds tremendous potential for a wide range of applications in the field of underwater communications.

MXene Sediment-Based Poly(vinyl alcohol)/Sodium Alginate Aerogel Evaporator with Vertically Aligned Channels for Highly Efficient Solar Steam Generation.

Solar-driven interfacial evaporation from seawater is considered an effective way to alleviate the emerging freshwater crisis because of its green and environmentally friendly characteristics. However, developing an evaporator with high efficiency, stability, and salt resistance remains a key challenge. MXene, with an internal photothermal conversion efficiency of 100%, has received tremendous research interest as a photothermal material. However, the process to prepare the MXene with monolayer is inefficient and generates a large amount of "waste" MXene sediments (MS). Here, MXene sediments is selected as the photothermal material, and a three-dimensional MXene sediments/poly(vinyl alcohol)/sodium alginate aerogel evaporator with vertically aligned pores by directional freezing method is innovatively designed. The vertical porous structure enables the evaporator to improve water transport, light capture, and high evaporation rate. Cotton swabs and polypropylene are used as the water channel and support, respectively, thus fabricating a self-floating evaporator. The evaporator exhibits an evaporation rate of 3.6 kg m-2 h-1 under one-sun illumination, and 18.37 kg m-2 of freshwater is collected in the condensation collection device after 7 h of outdoor sun irradiation. The evaporator also displays excellent oil and salt resistance. This research fully utilizes "waste" MS, enabling a self-floating evaporation device for freshwater collection.