Aging effects on cadmium transport in undisturbed contaminated sandy soil columns.

Limited information is available on the effects of contaminant aging (i.e., the contact time of Cd with the soil) on Cd transport in soils. We conducted displacement experiments in which indigenous Cd and freshly applied Cd were leached simultaneously from undisturbed samples of three Spodosol horizons. Sorption of Cd was described using Freundlich isotherms, whereas transport was described as a convection-dispersion process. Parameter optimization analysis using a mobile-immobile transport model applied to nonsorbing tracer displacement data showed that 16 to 22% of the water in the columns was immobile. The low dimensionless mass transfer coefficients in the mobile-immobile model were indicative of diffusion-limited transfer between mobile and immobile water, and hence physical nonequilibrium. A two-site kinetic sorption model could be fitted closely to breakthrough curves of the non-aged Cd for three soil horizons. No conclusive evidence was found that contaminant aging in soil affects cadmium transport. On the one hand, predictions of aged Cd leaching, using parameters estimated from displacement experiments with nonaged Cd, differed from those for the aged Cd in the E horizon. On the other hand, no meaningful differences in transport behavior between aged and non-aged Cd were found for the humus Bh and Bh/C horizons. The two-site kinetic rate coefficient alphac was found to depend on water flux, further indicating that mass transfer between sorption sites and the liquid is limited by diffusion rather than by kinetic sorption.

Screening tests for hazard classification of complex waste materials--selection of methods.

In this study we describe the development of an alternative methodology for hazard characterization of waste materials. Such an alternative methodology for hazard assessment of complex waste materials is urgently needed, because the lack of a validated instrument leads to arbitrary hazard classification of such complex waste materials. False classification can lead to human and environmental health risks and also has important financial consequences for the waste owner. The Hazardous Waste Directive (HWD) describes the methodology for hazard classification of waste materials. For mirror entries the HWD classification is based upon the hazardous properties (H1-15) of the waste which can be assessed from the hazardous properties of individual identified waste compounds or--if not all compounds are identified--from test results of hazard assessment tests performed on the waste material itself. For the latter the HWD recommends toxicity tests that were initially designed for risk assessment of chemicals in consumer products (pharmaceuticals, cosmetics, biocides, food, etc.). These tests (often using mammals) are not designed nor suitable for the hazard characterization of waste materials. With the present study we want to contribute to the development of an alternative and transparent test strategy for hazard assessment of complex wastes that is in line with the HWD principles for waste classification. It is necessary to cope with this important shortcoming in hazardous waste classification and to demonstrate that alternative methods are available that can be used for hazard assessment of waste materials. Next, by describing the pros and cons of the available methods, and by identifying the needs for additional or further development of test methods, we hope to stimulate research efforts and development in this direction. In this paper we describe promising techniques and argument on the test selection for the pilot study that we have performed on different types of waste materials. Test results are presented in a second paper. As the application of many of the proposed test methods is new in the field of waste management, the principles of the tests are described. The selected tests tackle important hazardous properties but refinement of the test battery is needed to fulfil the a priori conditions.

DISCRISET: a battery of tests for fast waste classification--application of tests on waste extracts.

The Hazardous Waste Directive (HWD, Council Directive 91/689/EC, 1991) provides a framework for classification of hazardous waste, based on 15 Hazard (H)-criteria. For complex wastes the HWD foresees the application of toxicity tests on the waste material itself to assess its toxic properties. However, these proposed test methods often involve mammalian testing, which is not acceptable from an ethical point of view, nor is it feasible economically. The DISCRISET project was initiated to investigate the use of alternative chemical and biological fast screening tests for waste hazard classification. In the first part of the project, different methods were reviewed and a testing strategy was proposed to minimize time and cost of analysis by a tiered approach. This includes as a first tier chemical analysis followed by a general acute toxicity screen as a second tier and as a third tier mechanistic toxicity tests to assess chronic toxicity (genotoxicity, hormone disturbance, teratogenic effects, immunologic activity). In this phase of the project, selected methods were applied to 16 different waste samples from various sources and industries. The first tier chemical tests are recommended for the full characterization of the leachate fraction (inorganics) but not for the organic fraction of samples. Here the chemical characterization is only useful if toxic content is known or suspected. As second tier the fast bacterial test Microtox is validated as a general toxicity screen for the organic fraction (worst case organic extract). Samples that are not classified in tier 1 or 2 are then further investigated in the third tier by the mechanistic toxicity tests and tested for their potential chronic toxicity: immune activity (TNF-α upregulation) is indicative for corrosive, irritating or sensitising effects (H4/H8/H15), reproductive effects (H10) are indicated by hormone disturbance and early life stage abnormalities in fish larvae when exposed to the extracts and mutagenicity and carcinogenicity (H7, H11) are indicated by SOS response induction and increased mutation frequency in the Ames test when exposed to the extracts. Results indicate that the combination of chemical tests and bioassays allows important hazardous properties to be addressed and the tiered approach ensures that the tests are performed quickly and economically. The suggested strategy provides a solid and ethical alternative to the methods described in the HWD and is a vast improvement on the current, arbitrary classification.