Tailoring Pyro-and Orthophosphate Species to Enhance Stem Cell Adhesion to Phosphate Glasses.

Phosphate-based glasses (PBGs) offer significant therapeutic potential due to their bioactivity, controllable compositions, and degradation rates. Several PBGs have already demonstrated their ability to support direct cell growth and in vivo cytocompatibility for bone repair applications. This study investigated development of PBG formulations with pyro- and orthophosphate species within the glass system (40 - x)P2O5·(16 + x)CaO·20Na2O·24MgO (x = 0, 5, 10 mol%) and their effect on stem cell adhesion properties. Substitution of phosphate for calcium revealed a gradual transition within the glass structure from Q2 to Q0 phosphate species. Human mesenchymal stem cells were cultured directly onto discs made from three PBG compositions. Analysis of cells seeded onto the discs revealed that PBG with higher concentration of pyro- and orthophosphate content (61% Q1 and 39% Q0) supported a 4.3-fold increase in adhered cells compared to glasses with metaphosphate connectivity (49% Q2 and 51% Q1). This study highlights that tuning the composition of PBGs to possess pyro- and orthophosphate species only, enables the possibility to control cell adhesion performance. PBGs with superior cell adhesion profiles represent ideal candidates for biomedical applications, where cell recruitment and support for tissue ingrowth are of critical importance for orthopaedic interventions.

Mammalian-Cell-Driven Polymerisation of Pyrrole.

A model cancer cell line was used to initiate polymerisation of pyrrole to form the conducting material polypyrrole. The polymerisation was shown to occur through the action of cytosolic exudates rather than that of the membrane redox sites that normally control the oxidation state of iron as ferricyanide or ferrocyanide. The data demonstrate for the first time that mammalian cells can be used to initiate synthesis of conducting polymers and suggest a possible route to detection of cell damage and/or transcellular processes through in situ and amplifiable signal generation.

Ion exchange and binding in selenium remediation materials using DNP-enhanced solid-state NMR spectroscopy.

Selenate-loaded selenium water remediation materials based on polymer fibres have been investigated by dynamic nuclear polarization (DNP) enhanced solid-state NMR. For carbon-13 a significant reduction in experiment time is obtained with DNP even when compared with conventional carbon-13 NMR spectra recorded using larger samples. For the selenium remediation materials studied here this reduction allows efficient acquisition of {1H}-77Se heteronuclear correlation spectra which give information about the nature of the binding of the remediated selenate ions with the grafted side chains which provide the required ion exchange functionality.

Structure of Ancient Glass by 29 Si Magic Angle Spinning NMR Spectroscopy.

29 Si magic angle spinning (MAS) NMR spectroscopy has been applied for the first time to the structural analysis of ancient glass samples obtained from archaeological excavations. The results show that it is possible to establish the distribution of Si environments in ancient glass by 29 Si MAS NMR, so long as the concentrations of magnetic impurities, such as Mn and Fe oxides, are low. In general, good agreement has been obtained with compositions determined by means of electron probe microanalysis. In addition, the 29 Si MAS NMR data reveal structural differences between glasses manufactured at separate ancient sites.

1H CSA parameters by ultrafast MAS NMR: Measurement and applications to structure refinement.

A 1H anisotropic-isotropic chemical shift correlation experiment which employs symmetry-based recoupling sequences to reintroduce the chemical shift anisotropy in ν1 and ultrafast MAS to resolve 1H sites in ν2 is described. This experiment is used to measure 1H shift parameters for L-ascorbic acid, a compound with a relatively complex hydrogen-bonding network in the solid. The 1H CSAs of hydrogen-bonded sites with resolved isotropic shifts can be extracted directly from the recoupled lineshapes. In combination with DFT calculations, hydrogen positions in crystal structures obtained from X-ray and neutron diffraction are refined by comparison with simulations of the full two-dimensional NMR spectrum. The improved resolution afforded by the second dimension allows even unresolved hydrogen-bonded sites 1H to be assigned and their shift parameters to be obtained.

Insight into lithium transport in lithium nitridometallate battery materials from muon spin relaxation.

Muon spin relaxation and powder neutron diffraction have been combined to study three lithium cobalt nitride battery materials. Neutron diffraction shows that these retain the P6/mmm space group of Li(3)N with Co located only on Li(1) sites. The lattice parameters vary smoothly with the degree of metal substitution, such that the [Li(2)N] layers expand while the layer separation contracts, as observed previously for similar series of Cu- and Ni-substituted materials. However, in contrast to the latter, the Li(3-x-y)Co(x)N phases exhibit Curie-Weiss paramagnetism and this prevents the use of nuclear magnetic resonance to measure Li(+) transport parameters. Therefore, muon spin relaxation has been employed here as an alternative technique to obtain quantitative information about Li(+) diffusion. Muon spin relaxation shows that Li(+) diffusion in Li(3-x-y)Co(x)N is anisotropic with transport confined to the [Li(2)N] plane at low temperature and exchange between Li(1) and Li(2) sites dominant at high temperature. By a comparison with previous studies some general trends have been established across a range of Cu-, Ni- and Co-substituted materials. For intra-layer diffusion E(a) decreases as metal substitution increases and the corresponding expansion of the layers results in a more open pathway for Li(+) diffusion. However, an optimal value of x is found with a ≈ 3.69 Å after which the concomitant contraction in layer spacing reduces the polarizability of the lattice framework.

Synthesis of core-shell polymer particles in supercritical carbon dioxide via iterative monomer addition.

A new, robust methodology for the synthesis of polystyrene-poly(methyl methacrylate) (PS-PMMA) core-shell particles using seeded dispersion polymerisation in supercritical carbon dioxide is reported, where the core-shell ratio can be controlled predictably via manipulation of reagent stoichiometry. The key development is the application of an iterative addition of the MMA shell monomer to the pre-prepared PS core. Analysis of the materials with differing core-shell ratios indicates that all are isolated as single particle populations with distinct and controllable core-shell morphologies.

Pore with gate: enhancement of the isosteric heat of adsorption of dihydrogen via postsynthetic cation exchange in metal-organic frameworks.

Three isostructural anionic frameworks {[(Hdma)(H(3)O)][In(2)(L(1))(2)]·4DMF·5H(2)O}(∞) (NOTT-206-solv), {[H(2)ppz][In(2)(L(2))(2)]·3.5DMF·5H(2)O}(∞) (NOTT-200-solv), and {[H(2)ppz][In(2)(L(3))(2)]·4DMF·5.5H(2)O}(∞) (NOTT-208-solv) (dma = dimethylamine; ppz = piperazine) each featuring organic countercations that selectively block the channels and act as pore gates have been prepared. The organic cations within the as-synthesized frameworks can be replaced by Li(+) ions to yield the corresponding Li(+)-containing frameworks {Li(1.2)(H(3)O)(0.8)[In(2)(L(1))(2)]·14H(2)O}(∞) (NOTT-207-solv), {Li(1.5)(H(3)O)(0.5)[In(2)(L(2))(2)]·11H(2)O}(∞) (NOTT-201-solv), and {Li(1.4)(H(3)O)(0.6)[In(2)(L(3))(2)]·4acetone·11H(2)O}(∞) (NOTT-209-solv) in which the pores are now unblocked. The desolvated framework materials NOTT-200a, NOTT-206a, and NOTT-208a display nonporous, hysteretic and reversible N(2) uptakes, respectively, while NOTT-206a and NOTT-200a provide a strong kinetic trap showing adsorption/desorption hysteresis with H(2). Single crystal X-ray analysis confirms that the Li(+) ions are either tetrahedrally (in NOTT-201-solv and NOTT-209-solv) or octahedrally (in NOTT-207-solv) coordinated by carboxylate oxygen atoms and/or water molecules. This is supported by (7)Li solid-state NMR spectroscopy. NOTT-209a, compared with NOTT-208a, shows a 31% enhancement in H(2) storage capacity coupled to a 38% increase in the isosteric heat of adsorption to 12 kJ/mol at zero coverage. Thus, by modulating the pore environment via postsynthetic cation exchange, the gas adsorption properties of the resultant MOF can be fine-tuned. This affords a methodology for the development of high capacity storage materials that may operate at more ambient temperatures.

Structure, stoichiometry and transport properties of lithium copper nitride battery materials: combined NMR and powder neutron diffraction studies.

A combined NMR and neutron diffraction study has been carried out on three Li(3-x-y)Cu(x)N materials with x=0.17, x=0.29 and x=0.36. Neutron diffraction indicates that the samples retain the P6/mmm space group of the parent Li(3)N with Cu located only on Li(1) sites. The lattice parameters vary smoothly with x in a similar fashion to Li(3-x-y)Ni(x)N, but the Li(2) vacancy concentration for the Cu-substituted materials is negligible. This structural model is confirmed by wideline (7)Li NMR spectra at 193 K which show three different local environments for the Li(1) site, resulting from the substitution of neighbouring Li atoms in the Li(1) layer by Cu. Since the Cu-substituted materials are only very weakly paramagnetic, variable temperature (7)Li wideline NMR spectra can be used to measure diffusion coefficients and activation energies. These indicate anisotropic Li(+) diffusion similar to the parent Li(3)N with transport confined to the [Li(2)N] plane at low temperature and exchange between Li(1) and Li(2) sites dominant at high temperature. For the intra-layer process the diffusion coefficients at room temperature are comparable to Li(3)N and Li(3-x-y) Ni(x)N, while E(a) decreases as x increases in contrast to the opposite trend in Ni-substituted materials. For the inter-layer process E(a) decreases only slightly as x increases, but the diffusion coefficients at room temperature increase rapidly with x.

Solid-state nuclear magnetic resonance studies of vinyl polymer/silica colloidal nanocomposite particles.

Solid-state nuclear magnetic resonance (NMR) has been used to characterize the interface between the organic and inorganic components of "core-shell" colloidal nanocomposite particles synthesized by in situ aqueous (co)polymerization of styrene and/or n-butyl acrylate in the presence of a glycerol-functionalized silica sol. Polymer protons are in close proximity (<5 A) to surface silanol sites in all the nanocomposites studied, indicating that either styrene or n-butyl side groups extend between the glycerol-functional silane molecules toward the surface of the silica particles. For the poly(styrene-co-n-butyl acrylate)/silica nanocomposite n-butyl acrylate residues are located closer to the surface of the silica particle than styrene residues, suggesting a specific interaction between the former and the glycerol-functionalized silica surface. The most likely explanation is a hydrogen bond between the ester carbonyl and the glycerol groups, although this cannot be observed directly. For the Bindzil CC40 glycerol-functionalized silica sol the relative intensities of (29)Si NMR lines corresponding to T and Q(3) environments imply that there are approximately twice as many unreacted silanol groups on the silica surface as attached silane molecules.

Catalytic nanosponges of acidic aluminosilicates for plastic degradation and CO2 to fuel conversion.

The synthesis of solid acids with strong zeolite-like acidity and textural properties like amorphous aluminosilicates (ASAs) is still a challenge. In this work, we report the synthesis of amorphous "acidic aluminosilicates (AAS)", which possesses Brønsted acidic sites like in zeolites and textural properties like ASAs. AAS catalyzes different reactions (styrene oxide ring-opening, vesidryl synthesis, Friedel-Crafts alkylation, jasminaldehyde synthesis, m-xylene isomerization, and cumene cracking) with better performance than state-of-the-art zeolites and amorphous aluminosilicates. Notably, AAS efficiently converts a range of waste plastics to hydrocarbons at significantly lower temperatures. A Cu-Zn-Al/AAS hybrid shows excellent performance for CO2 to fuel conversion with 79% selectivity for dimethyl ether. Conventional and DNP-enhanced solid-state NMR provides a molecular-level understanding of the distinctive Brønsted acidic sites of these materials. Due to their unique combination of strong acidity and accessibility, AAS will be a potential alternative to zeolites.

Halide Mixing and Phase Segregation in Cs2AgBiX6 (X = Cl, Br, and I) Double Perovskites from Cesium-133 Solid-State NMR and Optical Spectroscopy.

All-inorganic double perovskites (elpasolites) are a promising potential alternatives to lead halide perovskites in optoelectronic applications. Although halide mixing is a well-established strategy for band gap tuning, little is known about halide mixing and phase segregation phenomena in double perovskites. Here, we synthesize a wide range of single- and mixed-halide Cs2AgBiX6 (X = Cl, Br, and I) double perovskites using mechanosynthesis and probe their atomic-level microstructure using 133Cs solid-state MAS NMR. We show that mixed Cl/Br materials form pure phases for any Cl/Br ratio while Cl/I and Br/I mixing is only possible within a narrow range of halide ratios (<3 mol % I) and leads to a complex mixture of products for higher ratios. We characterize the optical properties of the resulting materials and show that halide mixing does not lead to an appreciable tunability of the PL emission. We find that iodide incorporation is particularly pernicious in that it quenches the PL emission intensity and radiative charge carrier lifetimes for iodide ratios as low as 0.3 mol %. Our study shows that solid-state NMR, in conjunction with optical spectroscopies, provides a comprehensive understanding of the structure-activity relationships, halide mixing, and phase segregation phenomena in Cs2AgBiX6 (X = Cl, Br, and I) double perovskites.

The effect of MgO/TiO2 on structural and crystallization behavior of near invert phosphate-based glasses.

Varying formulations in the glass system of 40P2 O5 ─(24 - x)MgO─(16 + x)CaO─(20 - y)Na2 O─yTiO2 (where 0 ≤ x ≤ 22 and y = 0 or 1) were prepared via melt-quenching. The structure of the glasses was confirmed by X-ray diffraction (XRD), Fourier transform infrared (FTIR), micro Raman and solid-state nuclear magnetic resonance (NMR) spectroscopies. The thermal properties and the activation energy of crystallization (Ec ) were measured using thermal analysis and the Kissinger equation, respectively. The glass forming ability of the formulations investigated was seen to decrease with reducing MgO content down to 8 mol% and the glass stability region also decreased from 106 to 90°C with decreasing MgO content. The activation energy of crystallization (Ec ) values also decreased from 248 (for 24 mol% MgO glass) to 229 kJ/mol (for the 8 mol% MgO content) with the replacement of MgO by CaO for glasses with no TiO2 . The formulations containing less than 8 mol% MgO without TiO2 showed a strong tendency toward crystallization. However, the addition of 1 mol% TiO2 in place of Na2 O for these glasses with less than 8 mol% MgO content, inhibited their crystallization tendency. Glasses containing 8 mol% MgO with 1 mol% TiO2 revealed a 12°C higher glass transition temperature, a 14°C increase in glass stability against crystallization and a 38 kJ/mol increase in Ec in comparison to their non TiO2 containing counterpart. NMR spectroscopy revealed that all of the formulations contained almost equal percentages of Q1 and Q2 species. However, FTIR and Raman spectroscopies showed that the local structure of the glasses had been altered with addition of 1 mol% TiO2 , which acted as a network modifier, impeding crystallization by increasing the cross-linking between phosphate chains and consequently leading to increased Ec as well as their glass forming ability.

Low dimensional nanostructures of fast ion conducting lithium nitride.

As the only stable binary compound formed between an alkali metal and nitrogen, lithium nitride possesses remarkable properties and is a model material for energy applications involving the transport of lithium ions. Following a materials design principle drawn from broad structural analogies to hexagonal graphene and boron nitride, we demonstrate that such low dimensional structures can also be formed from an s-block element and nitrogen. Both one- and two-dimensional nanostructures of lithium nitride, Li3N, can be grown despite the absence of an equivalent van der Waals gap. Lithium-ion diffusion is enhanced compared to the bulk compound, yielding materials with exceptional ionic mobility. Li3N demonstrates the conceptual assembly of ionic inorganic nanostructures from monolayers without the requirement of a van der Waals gap. Computational studies reveal an electronic structure mediated by the number of Li-N layers, with a transition from a bulk narrow-bandgap semiconductor to a metal at the nanoscale.

Gallium incorporation into phosphate based glasses: Bulk and thin film properties.

The osteogenic ions Ca2+, P5+, Mg2+, and antimicrobial ion Ga3+ were homogenously dispersed into a 1.45 µm thick phosphate glass coating by plasma assisted sputtering onto commercially pure grade titanium. The objective was to deliver therapeutic ions in orthopaedic/dental implants such as cementeless endoprostheses or dental screws. The hardness 4.7 GPa and elastic modulus 69.7 GPa, of the coating were comparable to plasma sprayed hydroxyapatite/dental enamel, whilst superseding femoral cortical bone. To investigate the manufacturing challenge of translation from a target to vapour condensed coating, structural/compositional properties of the target (P51MQ) were compared to the coating (P40PVD) and a melt-quenched equivalent (P40MQ). Following condensation from P51MQ to P40PVD, P2O5 content reduced from 48.9 to 40.5 mol%. This depolymerisation and reduction in the P-O-P bridging oxygen content as determined by 31P NMR, FTIR and Raman spectroscopy techniques was attributed to a decrease in the P2O5 network former and increases in alkali/alkali-earth cations. P40PVD appeared denser (3.47 vs. 2.70 g cm-3) and more polymerised than it's compositionally equivalent P40MQ, showing that structure/ mechanical properties were affected by manufacturing route.

Chemical shift anisotropy amplification with high amplification factor and improved sensitivity.

An improved version of the recently proposed chemical shift anisotropy amplification experiment is described. The original experiment correlates a fast magic angle spinning spectrum in the omega2 dimension with a sideband pattern in omega1 in which the intensities mimic those for a sample spinning at a fraction of the rate omegar/N. Advantages of the experiment include the use of standard methods to extract the principal tensor components from the omega1 sideband patterns and the small number of t1 increments required. The improved version described here permits large amplification factors N to be obtained without resort to prohibitively long sequences of pi-pulses and allows sensitivity to be maximized by eliminating the need to store the magnetization along the z-axis for t1. Amplification factors up to 32 are demonstrated experimentally.

Measuring (19)F shift anisotropies and (1)H-(19)F dipolar interactions with ultrafast MAS NMR.

A new (19)F anisotropic-isotropic shift correlation experiment is described that operates with ultrafast MAS, resulting in good resolution of isotropic (19)F shifts in the detection dimension. The new experiment makes use of a recoupling sequence designed using symmetry principles that reintroduces the (19)F chemical shift anisotropy in the indirect dimension. The situations in which the new experiment is appropriate are discussed, and the (19)F shift anisotropy parameters in poly(difluoroethylene) (PVDF) are measured. In addition, similar recoupling sequences are shown to be effective for measuring (1)H-(19)F distances via the heteronuclear dipolar interaction. This is demonstrated by application to a recently synthesized zirconium phosphonate material that contains one-dimensional chains linked by H-F hydrogen bonds.

Chemical shift anisotropy amplification.

A new NMR experiment which allows a measurement of the chemical shift anisotropy (CSA) tensor under magic angle spinning (MAS) is described. This correlates a fast MAS spectrum in the omega2 dimension with a sideband pattern in omega1 in which the intensities mimic those for a sample spinning at a fraction of the rate omega r/N, and these sidebands result from an amplification by a factor N of the modulation caused by the CSA. Standard methods can be used to extract the principal tensor components from the omega1 sideband patterns, and the nature of the experiment is such that the use of a large number of t1 increments can be avoided without compromising the resolution of different chemical sites. The new experiment is useful for accurately measuring narrow shift anisotropies.

The role of copper(II) in the aggregation of human amylin.

Amylin is a 37-residue peptide hormone produced by the islet ß-cells of pancreas and the formation of amylin aggregates is strongly associated with ß-cell degeneration in type 2 diabetes, as demonstrated by more than 95% of patients exhibiting amylin amyloid upon autopsy. It is widely recognized that metal ions such as copper(II) have been implicated in the aggregation process of amyloidogenic peptides such as Aß and α-synuclein and there is evidence that amylin self-assembly is also largely affected by copper(II). For this reason, in this work, the role of copper(II) in the aggregation of amylin has been investigated by several different experimental approaches. Mass spectrometric investigations show that copper(II) induces significant changes in the amylin structure, which decrease the protein fibrillogenesis as observed by ThT measurements. Accordingly, solid-state NMR experiments together with computational analysis carried out on a model amylin fragment confirmed the non-fibrillogenic nature of the copper(II) induced aggregated structure. Finally, the presence of copper(II) is also shown to have a major influence on amylin proneness to be degraded by proteases and cytotoxicity studies on different cell cultures are reported.

Measuring proton shift tensors with ultrafast MAS NMR.

A new proton anisotropic-isotropic shift correlation experiment is described which operates with ultrafast MAS, resulting in good resolution of isotropic proton shifts in the detection dimension. The new experiment makes use of a recoupling sequence designed using symmetry principles which reintroduces the proton chemical shift anisotropy in the indirect dimension. The experiment has been used to measure the proton shift tensor parameters for the OH hydrogen-bonded protons in tyrosine·HCl and citric acid at Larmor frequencies of up to 850 MHz.