Enhancement of bifidobacteria survival by Williopsis saturnus var. saturnus in milk.

The viability of three strains of probiotic Bifidobacterium lactis that were inoculated into UHT milk was examined with and without the presence of the yeast, Williopsis saturnus var. saturnus NCYC 22, in polypropylene tubes at 30 °C. The B. lactis viable cell count for strains HN019 and BB-12 remained above 6.0 Log cfu/ml, while strain B94 had 5.7 Log cfu/ml after six weeks of incubation in the presence of the co-inoculated yeast. Incubating the bifidus milk without added yeast under anaerobic condition did not improve the survival of B. lactis HN019, indicating that oxygen removal may not be responsible for W. saturnus NCYC 22's viability enhancing property. The addition of yeast supernatant or non-viable yeast also did not show any stabilising effects, suggesting that physical contact and/or interaction between viable W. saturnus and B. lactis plays an important role in sustaining the viability of the probiotic. W. saturnus NCYC 22 could increase the survival of B. lactis in bifidus milk under ambient temperature regardless of the initial concentration of yeast cells inoculated due to yeast growth. This study demonstrated the viability enhancing effect of viable W. saturnus NCYC 22 on B. lactis HN019, which could help towards extending the shelf-life of dairy beverages containing probiotic bifidobacteria.

Cannulated versus non-cannulated cancellous screw fixation for femoral neck fractures: a synthetic bone biomechanical study.

PURPOSE: To compare the compressive strength of cannulated versus non-cannulated cancellous screws for undisplaced femoral neck fractures in synthetic bones. METHODS: 18 synthetic proximal femurs simulating an AO B1 valgus impacted femoral neck fracture in osteoporotic bone were used. The fracture angles were between 55º and 63º (Pauwels grade 2). Fixation was made using 6.5-mm non-cannulated screws (n=6), 6.5-mm cannulated screws (n=6), or 7.3-mm cannulated screws (n=6). A custom-built jig was designed to guide the insertion of the screws in an identical triangular configuration. Screws were tightened by a single operator using a torque-measuring screwdriver. The femoral head was subjected to progressive axial loading at 5 mm/min. The load to failure and displacement were recorded. RESULTS: The 3 groups did not differ significantly except that the load to failure was higher in the construct with 6.5-mm non-cannulated screws than that with 6.5-mm cannulated screws (1222 N vs 1008 N, p=0.003). CONCLUSION: The compressive strength of a synthetic bone hip fracture model fixed with non-cannulated screws was higher than that of cannulated screws of the same diameter.