Co-delivery of gemcitabine and salinomycin in PEGylated liposomes for enhanced anticancer efficacy against colorectal cancer.

Colorectal cancer remains one of the major causes of morbidity and mortality in both developed and emerging countries. Cancer stem cells (CSCs) are a subpopulation of cells within the tumor mass harboring stem cell characteristics, considered responsible for tumor initiation, growth, relapse, and treatment failure. Lately, it has become clear that both CSCs and non-CSCs have to be eliminated for the successful eradication of cancer. Drug delivery systems have been extensively employed to enhance drug efficacy. In this study, salinomycin (SAL), a selective anti-CSC drug, and gemcitabine (GEM), a conventional anticancer drug, were co-loaded in liposomes and tested for optimal therapeutic efficacy. We employed the Design of Experiments approach to develop and optimize a liposomal delivery system for GEM and SAL. The antiproliferative effect of the liposomes was evaluated in SW-620 human colorectal cancer cells. The GEM and SAL-loaded liposomes exhibited adequate size, polydispersity, zeta potential, and drug content. The in vitro release study showed a sustained release of GEM and SAL from the liposomes over 72 h. Moreover, no sign of liposome aggregation was seen over 1 month and in a biological medium (FBS). The in vitro cytotoxic effects of the co-loaded liposomes were superior to that of single GEM either in free or liposomal form. The combination therapy using GEM and SAL co-loaded in liposomes could be a promising strategy for tackling colorectal cancer.

Antiproliferative and Antimicrobial Effects of Rosmarinus officinalis L. Loaded Liposomes.

Rosmarinus officinalis L. is a species that is widely known for its culinary and medicinal uses. The purpose of the present study consisted of the evaluation of the antiproliferative and antimicrobial effects of R. officinalis-loaded liposomes (L-R). Characterization of the liposomes was performed by establishing specific parameters. The load of the obtained liposomes was analyzed using an LC-MS method, and antiproliferative assays evaluated the cell viability on a liver adenocarcinoma cell line and on a human hepatic stellate cell line. Antimicrobial assays were performed by agar-well diffusion and by broth microdilution assays. The obtained liposomes showed high encapsulation efficiency, suitable particle size, and good stability. High amounts of caffeic (81.07 ± 0.76), chlorogenic (14.10 ± 0.12), carnosic (20.03 ± 0.16), rosmarinic (39.81 ± 0.35), and ellagic (880.02 ± 0.14) acids were found in their composition, together with other polyphenols. Viability and apoptosis assays showed an intense effect on the cancerous cell line and a totally different pattern on the normal cells, indicating a selective toxicity towards the cancerous ones and an anti-proliferative mechanism. Antimicrobial potential was noticed against all tested bacteria, with a better efficacy towards Gram-positive species. These results further confirm the biological activities of R. officinalis leaf extract, and proposes and characterizes novel delivery systems for their encapsulation, enhancing the biological activities of polyphenols, and overcoming their limitations.

Testing the Limits of a Portable NIR Spectrometer: Content Uniformity of Complex Powder Mixtures Followed by Calibration Transfer for In-Line Blend Monitoring.

(1) Background: Portable NIR spectrometers gain more and more ground in the field of Process Analytical Technology due to the easy on-site flexibility and interfacing versatility. These advantages that originate from the instrument miniaturization, also come with a downside with respect to performance compared to benchtop devices. The objective of this work was to evaluate the performance of MicroNIR in a pharmaceutical powder blend application, having three active ingredients and 5 excipients. (2) Methods: Spectral data was recorded in reflectance mode using static and dynamic acquisition, on calibration set samples developed using an experimental design. (3) Results: The developed method accurately predicted the content uniformity of these complex mixtures, moreover it was validated in the entire calibration range using ±10% acceptance limits. With respect to at-line prediction, the method presented lower performance compared to a previously studied benchtop spectrometer. Regarding the in-line monitoring of the blending process, it was shown that the spectral variability-induced by dynamic acquisition could be efficiently managed using spectral pre-processing. (4) Conclusions: The in-line process monitoring resulted in accurate concentration profiles, highlighting differences in the mixing behaviour of the investigated ingredients. For the low dose component homogeneity was not reached due to an inefficient dispersive mixing.

Liposomal simvastatin sensitizes C26 murine colon carcinoma to the antitumor effects of liposomal 5-fluorouracil in vivo.

5-Fluorouracil-based therapy remains the main approach in colorectal cancer, even though there are still some drawbacks, such as chemoresistance. In this study we combined 5-fluorouracil encapsulated in long-circulating liposomes with simvastatin, also encapsulated in long-circulating liposomes, that was previously proved to exert antitumor actions on the same tumor model. The production of angiogenic/inflammatory proteins was assessed by protein array and the production of markers for tumor aggressiveness (Bcl-2, Bax, and nuclear factor [NF]-κB) were determined by western blot analysis. Intratumor oxidative stress was evaluated through measurement of malondialdehyde level by HPLC, and through spectrophotometric analysis of catalytic activity of catalase and of total antioxidant capacity. Immunohistochemical analysis of tumors for CD31 expression was assessed. Intratumor activity of MMP-2 by gelatin zymography was also carried out. Our results revealed that combined therapies based on liposomal formulations exerted enhanced antitumor activities compared with combined treatment with free drugs. Sequential treatment with liposomal simvastatin and liposomal 5-fluorouracil showed the strongest antitumor activity in C26 colon carcinoma in vivo, mainly through inhibition of tumor angiogenesis. Important markers for cancer progression (Bcl-2, Bax, NF-κB, and intratumor antioxidants) showed that liposomal simvastatin might sensitize C26 cells to liposomal 5-fluorouracil treatment in both regimens tested. The outcome of simultaneous treatment with liposomal formulations was superior to sequential treatment with both liposomal types as the invasive capacity of C26 tumors was strongly increased after the latest treatment. The antitumor efficacy of combined therapy in C26 colon carcinoma might be linked to the restorative effects on proteins balance involved in tumor angiogenesis.

Optimization of prednisolone-loaded long-circulating liposomes via application of Quality by Design (QbD) approach.

Quality by design principles (QbD) were used to assist the formulation of prednisolone-loaded long-circulating liposomes (LCL-PLP) in order to gain a more comprehensive understanding of the preparation process. This approach enables us to improve the final product quality in terms of liposomal drug concentration, encapsulation efficiency and size, and to minimize preparation variability. A 19-run D-optimal experimental design was used to study the impact of the highest risk factors on PLP liposomal concentration (Y1- µg/ml), encapsulation efficiency (Y2-%) and size (Y3-nm). Out of six investigated factors, four of them were identified as critical parameters affecting the studied responses. PLP molar concentration and the molar ratio of DPPC to MPEG-2000-DSPE had a positive impact on both Y1 and Y2, while the rotation speed at the formation of the lipid film had a negative impact. Y3 was highly influenced by prednisolone molar concentration and extrusion temperature. The accuracy and robustness of the model was further on confirmed. The developed model was used to optimize the formulation of LCL-PLP for efficient accumulation of the drug to tumor tissue. The cytotoxicity of the optimized LCL-PLP on C26 murine colon carcinoma cells was assessed. LCL-PLP exerted significant anti-angiogenic and anti-inflammatory effects on M2 macrophages, affecting indirectly the C26 colon carcinoma cell proliferation and development.

A step forward towards the development of stable freeze-dried liposomes: a quality by design approach (QbD).

This study highlights the advantages of using a Quality by Design (QbD) approach in order to gain a more comprehensive understanding of the freeze-drying process of pravastatin-loaded long-circulating liposomes (LCL-PRAV). Within the QbD paradigm, the present study aimed to establish the design space for the optimization of freeze-dried LCL-PRAV by means of Design of Experiment (DOE). The encapsulated solute retention (ESR), the average particle size, and zeta potential after freeze-drying, the residual moisture content, the macroscopic cake appearance, the glass transition temperature (Tg) of the freeze-dried cake, and the primary drying time were defined as critical quality attributes (CQAs) for the freeze-dried final product. Further on, the influence of lyoprotectant type, freezing rate, shelf temperature during primary drying, and the presence of an annealing step on the CQAs was investigated through a 21-run D-optimal experimental design. Three-dimensional response surfaces were generated to complete the statistical analysis and for a better understanding of the influence of variables and their interactions on the responses. The developed model was then used to build the design space for the freeze-dried liposomes, within which the product quality was assured and the process variability was minimized.

Development of a NIR Method for the In-Line Quantification of the Total Polyphenolic Content: A Study Applied on Ajuga genevensis L. Dry Extract Obtained in a Fluid Bed Process.

This study describes an innovative in-line near-infrared (NIR) process monitoring method for the quantification of the total polyphenolic content (TPC) of Ajuga genevensis dry extracts. The dry extract was obtained in a fluidized bed processor, by spraying and adsorbing a liquid extract onto an inert powder support. NIR spectra were recorded continuously during the extract's spraying process. For the calibration of the in-line TPC quantification method, samples were collected during the entire process. The TPC of each sample was assessed spectroscopically, by applying a UV-Vis reference method. The obtained values were further used in order to develop a quality OPLS prediction model by correlating them with the corresponding NIR spectra. The final dry extract registered good flowability and compressibility properties, a concentration in active principles three times higher than the one of the liquid extract and an overall process yield of 85%. The average TPC's recovery of the NIR in-line prediction method, compared with the reference UV-Vis one, was 98.7%, indicating a reliable monitoring method which provided accurate predictions of the TPC during the process, permitting a good process overview and enabling us to establish the process's end point at the exact moment when the product reaches the desired TPC concentration.

Process Optimization for Improved Phenolic Compounds Recovery from Walnut (Juglans regia L.) Septum: Phytochemical Profile and Biological Activities.

Plant by-products can be valuable sources of polyphenol bioactive compounds. Walnut (Juglans regia L.) is a very important tree nut rich in biologically active molecules, but its septum was scarcely researched. Experimental data indicated a hypoglycemic effect of septum extracts, with almost no details about its phytochemical composition. The main objectives of this study were: (1) to obtain walnut septum (WS) extracts with high content in bioactive compounds and antioxidant activity based on an original experimental design; (2) characterization of the phytochemical profile of the WS extracts using HPLC-MS/MS; (3) evaluation of the biological potential of the richest polyphenolic WS extract. The variables of the experimental design were: extraction method (maceration and Ultra-Turrax extraction), temperature, solvent (acetone and ethanol), and percentage of water in the solvent. The first quantifiable responses were: total phenolic content, total flavonoid content, condensed tannins, and ABTS antioxidant capacity. The phytochemical profile of lyophilized extracts obtained by Ultra-Turrax extraction (UTE), the most efficient method, was further determined by HPLC-MS/MS analysis of individual polyphenolic and phytosterols compounds. It is the first study to assay the detailed composition of WS in hydrophilic and lipophilic compounds. The biological potential of the richest polyphenolic WS extract was also evaluated by FRAP and DPPH antioxidant capacity and the inhibition of tyrosinase, an enzyme involved in the browning in fruits and vegetables, skin wrinkles and aging. Conclusion: The phytochemical profile of the analyzed extracts proves that WS can be a valuable source of biologically active compounds (polyphenols) for food and/or pharmaceutical industry and warrant the continuation of current research in further evaluating its bioactive potential.

Investigation of a Potential Pharmacokinetic Interaction Between Nebivolol and Fluvoxamine in Healthy Volunteers.

PURPOSE: To investigate whether fluvoxamine coadministration can influence the pharmacokinetic properties of nebivolol and its active hydroxylated metabolite (4-OH-nebivolol) and to assess the consequences of this potential pharmacokinetic interaction upon nebivolol pharmacodynamics. METHODS: This open-label, non-randomized, sequential clinical trial consisted of two periods: Period 1 (Reference), during which each volunteer received a single dose of 5 mg nebivolol and Period 2 (Test), when a combination of 5 mg nebivolol and 100 mg fluvoxamine was given to all subjects, after a 6-days pretreatment regimen with fluvoxamine (50-100 mg/day). Non-compartmental analysis was used to determine the pharmacokinetic parameters of nebivolol and its active metabolite. The pharmacodynamic parameters (blood pressure and heart rate) were assessed at rest after each nebivolol intake, during both study periods. RESULTS: Fluvoxamine pretreatment increased Cmax and AUC0-∞  of nebivolol (Cmax: 1.67 ± 0.690  vs 2.20 ± 0.970  ng/mL; AUC0-∞: 12.1 ± 11.0  vs 19.3 ± 19.5  ng*h/mL ) and of its active metabolite (Cmax: 0.680  ± 0.220  vs 0.960 ± 0.290  ng/mL; AUC0-∞: 17.6 ±20.1  vs 25.5 ± 29.9  ng*h/mL). Apart from Cmax,AUC0-t and AUC0-∞, the other pharmacokinetic parameters (tmax, kel and t½) were not significantly different between study periods. As for the pharmacodynamic analysis, decreases in blood pressure and heart rate after nebivolol administration were similar with and without fluvoxamine concomitant intake. CONCLUSIONS: Due to enzymatic inhibition, fluvoxamine increases the exposure to nebivolol and its active hydroxylated metabolite in healthy volunteers. This did not influence the blood pressure and heart-rate lowering effects of the beta-blocker administered as single-dose. However, more detail studies involving actual patients are required to further investigate the clinical relevance of this drug interaction. This article is open to POST-PUBLICATION REVIEW. Registered readers (see "For Readers") may comment by clicking on ABSTRACT on the issue's contents page.

QbD for pediatric oral lyophilisates development: risk assessment followed by screening and optimization.

OBJECTIVE: This study proposed the development of oral lyophilisates with respect to pediatric medicine development guidelines, by applying risk management strategies and DoE as an integrated QbD approach. METHODS: Product critical quality attributes were overviewed by generating Ishikawa diagrams for risk assessment purposes, considering process, formulation and methodology related parameters. Failure Mode Effect Analysis was applied to highlight critical formulation and process parameters with an increased probability of occurrence and with a high impact on the product performance. To investigate the effect of qualitative and quantitative formulation variables D-optimal designs were used for screening and optimization purposes. RESULTS: Process parameters related to suspension preparation and lyophilization were classified as significant factors, and were controlled by implementing risk mitigation strategies. Both quantitative and qualitative formulation variables introduced in the experimental design influenced the product's disintegration time, mechanical resistance and dissolution properties selected as CQAs. The optimum formulation selected through Design Space presented ultra-fast disintegration time (5 seconds), a good dissolution rate (above 90%) combined with a high mechanical resistance (above 600 g load). CONCLUSIONS: Combining FMEA and DoE allowed the science based development of a product with respect to the defined quality target profile by providing better insights on the relevant parameters throughout development process. The utility of risk management tools in pharmaceutical development was demonstrated.

A quality by design approach for the development of lyophilized liposomes with simvastatin.

Lyophilization is used to ensure an increased shelf-life of liposomes, by preserving them in dry state, more stable than the aqueous dispersions. When stored as aqueous systems, the encapsulated drugs are released and the liposomes might aggregate or fuse. The aim of this study was to develop and optimize a lyophilized formulation of simvastatin (SIM) loaded into long circulating liposomes using the Quality by Design (QbD) approach. Pharmaceutical development by QbD aims to identify characteristics that are critical for the final product quality, and to establish how the critical process parameters can be varied to consistently produce a product with the desired characteristics. In the case of lyophilized liposomes, the choice of the optimum formulation and technological parameters has to be done, in order to protect the integrity of the liposomal membrane during lyophilization. Thus, the influence of several risk factors (3 formulation factors: PEG proportion, cholesterol concentration, the cryoprotectant to phospholipids molar ratio, and 2 process parameters: the number of extrusions through 100 nm polycarbonate membranes and the freezing conditions prior lyophilization) over the critical quality attributes (CQAs) of lyophilized long circulating liposomes with simvastatin (lyo-LCL-SIM), i.e. the size, the encapsulated SIM concentration, the encapsulated SIM retention, the Tm change and the residual moisture content, was investigated within the current study using the design of experiments tool of QbD. Moreover, the design space for lyo-LCL-SIM was determined, in which the established quality requirements of the product are met, provided that the risk factors vary within the established limits.

The pharmaceutical applications of a biopolymer isolated from Trigonella foenum-graecum seeds: Focus on the freeze-dried matrix forming capacity.

The aim of the present study was to evaluate the funtion of fenugreek seed mucilage (FSM) as potential matrix forming agent for orodispersible pharmaceutical lyophilisates. The FSM was isolated and characterized. FSM colloidal dispersions were prepared and the rheological evaluation was performed. Oral lyophilisates (OLs) with different FSM concentrations, containing meloxicam as model drug were prepared by freeze drying method. The OLs were characterized and compared to gelatin containing tablets, prepared under the same conditions. The FSM dispersions revealed shear thinning flow type. Based on colloidal dispersions' rheological properties, five FSM concentrations were taken forward to the lyophilization step. Completely dry and elegant tablets were obtained. Texture analysis indicated highly porous structures, confirmed by SEM analysis, which explain the fast disintegration properties. All the prepared tablets disintegrated in less than 47 s. The disintegration process was prolonged by the increase in FSM content, due to the high viscosity the polymer creates in aqueous media. FSM tablets presented longer disintegration times, as compared to gelatin tablets, but also higher crushing strength. Considering the fast disintegration and the high crushing strength, FSM is a good candidate as matrix forming agent for fast disintegrating dosage forms or other freeze-dried preparations.

Assessment of a Potential Pharmacokinetic Interaction between Nebivolol and Bupropion in Healthy Volunteers.

BACKGROUND/AIMS: The study aimed at investigating the effects of multiple-dose bupropion (potent inhibitor of CYP2D6) on the pharmacokinetics (PKs) of single-dose nebivolol (CYP2D6 substrate) and to evaluate the clinical relevance of this potential drug interaction. METHODS: This open-label, nonrandomized clinical study had a 2-period design: during period 1 (reference), a single dose of 5 mg nebivolol was administered, while during period 2 (test), 5 mg nebivolol + 300 mg bupropion were ingested concomitantly, after a pretreatment regimen with bupropion (7 days). The PK parameters of nebivolol and its active metabolite were analyzed by noncompartmental modeling, while the pharmacodynamic (PD) parameters (blood pressure and heart rate) were assessed at rest. RESULTS: Bupropion plus nebivolol increased the mean peak plasma concentrations (Cmax) of nebivolol (1.67 ± 0.69 vs. 3.80 ± 1.70 ng/ml) and its active metabolite (0.68 ± 0.22 vs. 1.13 ± 0.38 ng/ml) compared to nebivolol alone. After bupropion pretreatment, the exposure to nebivolol was increased by 7.2-fold for the parent drug and 4-fold for the hydroxylated active metabolite. The difference between the PD parameters measured during the 2 periods was not significant. CONCLUSION: The study concluded that bupropion influenced the PKs of nebivolol in healthy volunteers, but a clinical relevance was not established. However, this latter aspect requires further investigation.

Defining the design space for freeze-dried orodispersible tablets with meloxicam.

OBJECTIVE: This work focused on simultaneously investigating formulation variables and freeze-drying parameters when preparing orodispersible tablets with meloxicam (Mel), by a Quality by Design (QbD) approach. MATERIALS AND METHODS: Methylcellulose (MC) was selected as a matrix forming agent and mannitol (Man) as cryoprotectant, both at two concentration levels. The freezing regime was also varied between fast and shelf-ramped, to find out how it affects the final products. The tablet formulations were characterized for their disintegration time, wetting properties, mechanical properties, morphology and in vitro dissolution. Response Surface Modeling completed the statistical analysis that assessed the effects of independent variables on the responses. RESULTS: All the responses showed good fitting to the chosen model. The increase in MC content determined a positive effect on disintegration time, wetting time, mechanical strength and a negative effect on Mel dissolution. High levels of Man-determined brittle products with low-absorption capacity and fast Mel dissolution. The freezing rate had an important effect on the structure of tablets: fast freezing determined slightly thicker pore walls with smooth surfaces, while shelf-ramped freezing led to a multiple-layer structure with increased hardness. Still, shelf-ramped freezing yielded higher Mel release, due to physical changes of the active substance during the freeze-drying process. CONCLUSION: From the generated design space, an optimal formulation was obtained and the results validated the experimental design. The QbD approach was an efficient manner of understanding formulation and process parameters at the freeze-dried orodispersible tablets preparation.

Optimizing long-circulating liposomes for delivery of simvastatin to C26 colon carcinoma cells.

Simvastatin (SIM) is a lipophilic statin that has potential benefits for prevention and treatment of several types of malignancies. However, its low water solubility and the toxicity associated with administration of high doses recommend it for encapsulation in carriers able to deliver the therapeutic dose in the tumor. In this work, liposomes with long-circulating properties were proposed as delivery systems for SIM. The objective of this study was to optimize the formulation of SIM-loaded long-circulating liposomes (LCL-SIM) by using D-optimal experimental design. The influence of phospholipids concentration, phospholipids to cholesterol molar ratio and SIM concentration was studied on SIM liposomal concentration, encapsulation efficiency and liposomal size. The optimized formulation had liposomal SIM concentration 6238 µg/ml, EE % of 83.4% and vesicle size of 190.5 nm. Additionally we evaluated the in vitro cytotoxicity of the optimized liposomal SIM (LCL-SIM-OPT) on C26 murine colon carcinoma cells cultivated in monoculture as well as in co-culture with murine peritoneal macrophages at a cell density ratio that provides an approximation of physiological conditions of colon carcinoma development in vivo. Our preliminary studies suggested that LCL-SIM-OPT exerted cytotoxicity on C26 cells probably via enhancement of oxidative stress in co-culture environment.

Development and validation of NIR-chemometric methods for chemical and pharmaceutical characterization of meloxicam tablets.

CONTEXT: Near-Infrared (NIR) spectroscopy is an important component of a Process Analytical Technology (PAT) toolbox and is a key technology for enabling the rapid analysis of pharmaceutical tablets. OBJECTIVE: The aim of this research work was to develop and validate NIR-chemometric methods not only for the determination of active pharmaceutical ingredients content but also pharmaceutical properties (crushing strength, disintegration time) of meloxicam tablets. MATERIALS AND METHODS: The development of the method for active content assay was performed on samples corresponding to 80%, 90%, 100%, 110% and 120% of meloxicam content and the development of the methods for pharmaceutical characterization was performed on samples prepared at seven different compression forces (ranging from 7 to 45 kN) using NIR transmission spectra of intact tablets and PLS as a regression method. RESULTS: The results show that the developed methods have good trueness, precision and accuracy and are appropriate for direct active content assay in tablets (ranging from 12 to 18 mg/tablet) and also for predicting crushing strength and disintegration time of intact meloxicam tablets. DISCUSSION: The comparative data show that the proposed methods are in good agreement with the reference methods currently used for the characterization of meloxicam tablets (HPLC-UV methods for the assay and European Pharmacopeia methods for determining the crushing strength and disintegration time). CONCLUSION: The results show the possibility to predict both chemical properties (active content) and physical/pharmaceutical properties (crushing strength and disintegration time) directly, without any sample preparation, from the same NIR transmission spectrum of meloxicam tablets.

Acceptability of compounded preparations - A Romanian pediatric hospital perspective.

Compounded medicines are widely used, especially for pediatric patients. The aim of this study was to evaluate children's acceptability of compounded preparations and to provide information regarding compounding practices' characteristics in a Romanian hospital setting. An observational, cross-sectional, and retrospective study was conducted in three Clinical Pediatric Departments (Emergency Clinical Hospital for Children, Cluj-Napoca). The study population comprised patients under 18 years old taking at least one compounded medication. Study data was collected mainly through an interviewer-administered questionnaire and medicine acceptability was assessed based on the children's first reaction to the preparations using a 3-point facial hedonic scale. A total of 162 compounded medications were evaluated. A positive/negative reaction was reported for 20.83%/58.33%, 20.63%/49.21%, and 66.67%/7.41% of oral, oromucosal and cutaneous dosage forms. Although patient disapproval was recorded for various reasons, medication administration was successful in over 75% of cases. Factors such as fewer steps required for intake of a dose, capsule dosage form, no additional food/drink immediately after drug intake, medication perceived as "easy/very easy" to swallow, were correlated with a better acceptability of oral preparations. This study highlights the importance of identifying factors that can improve the acceptability of compounded preparations and, subsequently, treatment outcomes in pediatric patients.

Development of Diclofenac Sodium 3D Printed Cylindrical and Tubular-Shaped Tablets through Hot Melt Extrusion and Fused Deposition Modelling Techniques.

The present study aimed to develop 3D printed dosage forms, using custom-made filaments loaded with diclofenac sodium (DS). The printed tablets were developed by implementing a quality by design (QbD) approach. Filaments with adequate FDM 3D printing characteristics were produced via hot melt extrusion (HME). Their formulation included DS as active substance, polyvinyl alcohol (PVA) as a polymer, different types of plasticisers (mannitol, erythritol, isomalt, maltodextrin and PEG) and superdisintegrants (crospovidone and croscarmellose sodium). The physicochemical and mechanical properties of the extruded filaments were investigated through differential scanning calorimetry (DSC), X-ray diffraction (XRD) and tensile measurements. In addition, cylindrical-shaped and tubular-shaped 3D dosage forms were printed, and their dissolution behaviour was assessed via various drug release kinetic models. DSC and XRD results demonstrated the amorphous dispersion of DS into the polymeric filaments. Moreover, the 3D printed tablets, regardless of their composition, exhibited a DS release of nearly 90% after 45 min at pH 6.8, while their release behaviour was effectively described by the Korsmeyer-Peppas model. Notably, the novel tube design, which was anticipated to increase the drug release rate, proved the opposite based on the in vitro dissolution study results. Additionally, the use of crospovidone increased DS release rate, whereas croscarmellose sodium decreased it.

Optimization of a Mucoadhesive Vaginal Gel Containing Clotrimazole Using a D-Optimal Experimental Design and Multivariate Analysis.

The aim of this study was to develop a suitable clotrimazole (CLT)-loaded mucoadhesive vaginal gel (CLT-MVG) for topical applications in vaginal candidiasis. Ten CLT-MVG formulations were prepared, consisting of mixtures of acid polyacrylic (Carbopol 940) and polyethene oxides, Sentry Polyox WSRN 1105 or 750, according to an experimental D-optimal design, and CLT was suspended at a ratio of 1%. The prepared CLT-MVG formulations were studied in vitro, and the formulation containing Carbopol 940 0.89% combined with PEO 1105 1.39% was identified with the optimal rheological and in vitro bioadhesion properties, ensuring the prolonged release of CLT, with a similarity factor greater than 50, indicating dissolution profile similarity for three batches of the optimized formulation. This optimized formulation showed a pH in the tolerance range, and an adequate ex vivo mucoadhesion time, while the FT-IR studies revealed no interactions between the excipients and CLT. The microscopic analysis identified a mean particle size of suspended CLT of 5.24 ± 0.57 µm. The in vitro antifungal activity of the optimized formulation was tested on twenty strains of Candida albicans and proved to be better compared to a marketed clotrimazole preparation, showing a greater inhibition effect (p < 0.05). The optimized formulation could be a good candidate for the local treatment of vaginal mycosis.

Cell uptake and intracellular trafficking of bioreducible poly(amidoamine) nanoparticles for efficient mRNA translation in chondrocytes.

Disulfide-containing poly(amidoamine) (PAA) is a cationic and bioreducible polymer, with potential use as a nanocarrier for mRNA delivery in the treatment of several diseases including osteoarthritis (OA). Successful transfection of joint cells with PAA-based nanoparticles (NPs) was shown previously, but cell uptake, endosomal escape and nanoparticle biodegradation were not studied in detail. In this study, C28/I2 human chondrocytes were transfected with NPs co-formulated with a PEG-polymer coating and loaded with EGFP mRNA for confocal imaging of intracellular trafficking and evaluation of transfection efficiency. Compared with uncoated NPs, PEG-coated NPs showed smaller particle size, neutral surface charge, higher colloidal stability and superior transfection efficiency. Furthermore, endosomal entrapment of these PEG-coated NPs decreased over time and mRNA release could be visualized both in vitro and in live cells. Importantly, cell treatment with modulators of the intracellular reducing environment showed that glutathione (GSH) concentrations affect translation of the mRNA payload. Finally, we applied a D-optimal experimental design to test different polymer-to-RNA loading ratios and dosages, thus obtaining an optimal formulation with up to ≈80% of GFP-positive cells and without toxic effects. Together, the biocompatibility and high transfection efficiency of this system may be a promising tool for intra-articular delivery of therapeutical mRNA in OA treatment.