Three-in-One: Dye-Volatile Cocrystals Exhibiting Intensity-Dependent Photochromic, Photomechanical, and Photocarving Response.

Cocrystallization of a cis-azobenzene dye with volatile molecules, such as pyrazine and dioxane, leads to materials that exhibit at least three different light-intensity-dependent responses upon irradiation with low-power visible light. The halogen-bond-driven assembly of the dye cis-(p-iodoperfluorophenyl)azobenzene with volatile halogen bond acceptors produces cocrystals whose light-induced behavior varies significantly depending on the intensity of the light applied. Low-intensity (<1 mW·cm-2) light irradiation leads to a color change associated with low levels of cis → trans isomerization. Irradiation at higher intensities (150 mW·mm-2) produces photomechanical bending, caused by more extensive isomerization of the dye. At still higher irradiation intensities (2.25 W·mm-2) the cocrystals undergo cold photocarving; i.e., they can be cut and written on with micrometer precision using laser light without a major thermal effect. Real-time Raman spectroscopy shows that this novel photochemical behavior differs from what would be expected from thermal energy input alone. Overall, this work introduces a rational blueprint, based on supramolecular chemistry in the solid state, for new types of crystalline light-responsive materials, which not only respond to being exposed to light but also change their response based on the light intensity.

Polymorphs and solid solutions: materials with new luminescent properties obtained through mechanochemical transformation of dicyanoaurate(I) salts.

We report the use of mechano- and thermochemical methods to create new solid-state luminescent materials from well-known inorganic salts, potassium dicyanoaurate(I) KAu(CN)2, and potassium dicyanocuprate(I) KCu(CN)2. In particular, manual grinding or ball milling of commercial samples of KAu(CN)2 led to the formation of a novel polymorph of the salt, herein termed m-KAu(CN)2, evident by a significant change in color of the fluorescence emission of the solid material from orange to violet. The formation of m-KAu(CN)2 is reversible upon addition of small amounts of solvents, and powder X-ray diffraction analysis indicates that the structure of m-KAu(CN)2 might be related to that of pristine KAu(CN)2 through a change in ordering of Au(CN)2- ions in a layered structure. Thermal treatment of KAu(CN)2 led to the discovery of another polymorph of this well-known salt, herein termed t-KAu(CN)2, making KAu(CN)2 a rare example of a system in which thermochemical and mechanochemical treatments lead to the formation of different, in each case previously not reported, polymorphic forms. The thermally-induced transformation from KAu(CN)2 to t-KAu(CN)2 takes place around 250 °C and proceeds in a crystal-to-crystal fashion, which enabled the preliminary structural characterisation through single crystal X-ray diffraction, revealing the retention of the layered structure and a change in ordering of Au(CN)2- ions. Milling of the simple salt KAu(CN)2 in the presence of equimolar amounts or less of its copper(I)-based analogue coordination polymer KCu(CN)2 leads to the formation of a series of solid solution materials, isostructural to m-KAu(CN)2 and with visible fluorescence emission distinct from KCu(CN)2 or any herein investigated forms of KAu(CN)2.

Amidino substituted 2-aminophenols: biologically important building blocks for the amidino-functionalization of 2-substituted benzoxazoles.

Unlike the closely related and widely investigated amidino-substituted benzimidazoles and benzothiazoles with a range of demonstrated biological activities, the matching benzoxazole analogues still remain a largely understudied and not systematically evaluated class of compounds. To address this challenge, we utilized the Pinner reaction to convert isomeric cyano-substituted 2-aminophenols into their amidine derivatives, which were isolated as hydrochlorides and/or zwitterions, and whose structure was confirmed by single crystal X-ray diffraction. The key step during the Pinner synthesis of the crucial carboximidate intermediates was characterized through mechanistic DFT calculations, with the obtained kinetic and thermodynamic parameters indicating full agreement with the experimental observations. The obtained amidines were subjected to a condensation reaction with aryl carboxylic acids that allowed the synthesis of a new library of 5- and 6-amidino substituted 2-arylbenzoxazoles. Their antiproliferative features against four human tumour cell lines (SW620, HepG2, CFPAC-1, HeLa) revealed sub-micromolar activities on SW620 for several cyclic amidino 2-naphthyl benzoxazoles, thus demonstrating the usefulness of the proposed synthetic strategy and promoting amidino substituted 2-aminophenols as important building blocks towards biologically active systems.

After 200 Years: The Structure of Bleach and Characterization of Hypohalite Ions by Single-Crystal X-Ray Diffraction*.

We report the first X-ray single crystal structures of hypochlorite (ClO- ) and hypobromite (BrO- ) salts, including hydrated sodium hypochlorite, a staple of the chlorine industry and ubiquitous bleaching and disinfection agent for almost 200 years. The structures, supported by variable-temperature Raman spectroscopy on individual crystals and periodic density-functional theory (DFT) calculations, provide insight into solid-state geometry and supramolecular chemistry of hypohalite ions.

Influencing the Self-Sorting Behavior of [2.2]Paracyclophane-Based Ligands by Introducing Isostructural Binding Motifs.

Two isostructural ligands with either nitrile (Lnit ) or isonitrile (Liso ) moieties directly connected to a [2.2]paracyclophane backbone with pseudo-meta substitution pattern have been synthesized. The ligand itself (Lnit ) or its precursors (Liso ) were resolved by HPLC on a chiral stationary phase and the absolute configuration of the isolated enantiomers was assigned by XRD analysis and/or by comparison of quantum-chemical simulated and experimental electronic circular dichroism (ECD) spectra. Surprisingly, the resulting metallosupramolecular aggregates formed in solution upon coordination of [(dppp)Pd(OTf)2 ] differ in their composition: whereas Lnit forms dinuclear complexes, Liso exclusively forms trinuclear ones. Furthermore, they also differ in their chiral self-sorting behavior as (rac)-Liso undergoes exclusive social self-sorting leading to a heterochiral assembly, whereas (rac)-Liso shows a twofold preference for the formation of homochiral complexes in a narcissistic self-sorting manner as proven by ESI mass spectrometry and NMR spectroscopy. Interestingly, upon crystallization, these discrete aggregates undergo structural transformation to coordination polymers, as evidenced by single-crystal X-ray diffraction.

Asymmetric Library Synthesis of P-Chiral t-Butyl-Substituted Secondary and Tertiary Phosphine Oxides.

An asymmetric synthesis, amenable to library preparation of structurally diverse P-chiral t-butyl substituted secondary phosphine oxides (SPOs) and tertiary phosphine oxides (TPOs), was developed. A P-chiral H-phosphinate building block was prepared via a two-step, one-pot condensation of a chiral auxiliary with t-BuPCl2, followed by hydrolysis. Nucleophilic displacement of the chiral auxiliary with Grignard reagents, followed by hydrolysis, provided a library of P-chiral SPOs. In situ treatment of the prehydrolysis intermediate with electrophiles also provided a library of P-chiral TPOs in high enantiomeric purity.

Dynamic Refolding of Ion-Pair Catalysts in Response to Different Anions.

Four distinct folding patterns are identified in two foldamer-type urea-thiourea catalysts bearing a basic dimethylamino unit by a combination of X-ray crystallography, solution NMR studies, and computational studies (DFT). These patterns are characterized by different intramolecular hydrogen bonding schemes that arise largely from different thiourea conformers. The free base forms of the catalysts are characterized by folds where the intramolecular hydrogen bonds between the urea and the thiourea units remain intact. In contrast, the catalytically relevant salt forms of the catalyst, where the catalyst forms an ion pair with the substrate or substrate analogues, appear in two entirely different folding patterns. With larger anions that mimic the dialkyl malonate substrates, the catalysts maintain their native fold both in the solid state and in solution, but with smaller halide anions (fluoride, chloride, and bromide), the catalysts fold around the halide anion (anion receptor fold), and the intramolecular hydrogen bonds are disrupted. Titration of catalyst hexafluoroacetylacetonate salt with tetra-n-butylammonium chloride results in dynamic refolding of the catalyst from the native fold to the anion receptor fold.

P-Chiral, N-phosphoryl sulfonamide Brønsted acids with an intramolecular hydrogen bond interaction that modulates organocatalysis.

Brønsted acids exemplified by OttoPhosa I (5c) were designed and evaluated in the asymmetric transfer hydrogenation of quinolines. Their catalytic properties are modulated by an intramolecular hydrogen bond that rigidifies their catalytic cavity, accelerates the reaction rate and improves enantioselectivity.

Electron-Deficient Pyridylimines: Versatile Building Blocks for Functional Metallosupramolecular Chemistry.

Metallosupramolecular systems heavily rely on the correct choice of ligands to obtain materials with desired properties. Engaging this problem, we present three ligand systems and six of their mono- and dinuclear complexes, based on the subcomponent self-assembly approach using electron-deficient pyridylcarbaldehyde building blocks. The properties are examined in solution by NMR and UV-vis spectroscopy and CV measurements as well as in solid state by single crystal X-ray diffraction analysis. Ultimately, the choice of ligands allows for fine-tuning of the electronic properties of the metal centers, complex-to-complex transformations, as well as establishing distinct anion-π-interaction motifs.

Stepwise Construction of Heterobimetallic Cages by an Extended Molecular Library Approach.

Two novel heterobimetallic complexes, a trigonal-bipyramidal and a cubic one, have been synthesized and characterized using the same C3-symmetric metalloligand, prepared by a simple subcomponent self-assembly strategy. Adopting the molecular library approach, we chose a mononuclear, preorganized iron(II) complex as the metalloligand capable of self-assembly into a trigonal-bipyramidal or a cubic aggregate upon coordination to cis-protected C2-symmetric palladium(II) or unprotected tetravalent palladium(II) ions, respectively. The trigonal-bipyramidal complex was characterized by NMR and UV-vis spectroscopy, electrospray ionization mass spectrometry (ESI-MS), and single-crystal X-ray diffraction. The cubic structure was characterized by NMR and UV-vis spectroscopy and ESI-MS.