Synthesis of Antimicrobial Chitosan-Silver Nanoparticles Mediated by Reusable Chitosan Fungal Beads.

Nanoparticles, especially silver nanoparticles (Ag NPs), have gained significant attention in recent years as potential alternatives to traditional antibiotics for treating infectious diseases due to their ability to inhibit the growth of microorganisms effectively. Ag NPs can be synthesized using fungi extract, but the method is not practical for large-scale production due to time and biomass limitations. In this study, we explore the use of chitosan to encapsulate the mycelia of the white-rot fungus Stereum hirsutum and form chitosan fungal beads for use in multiple extractions and nanoparticle synthesis. The resulting nanoparticles were characterized using various techniques, including UV-vis spectrophotometry, transmission electron microscopy, dynamic light scattering, and X-ray diffraction analysis. The analysis revealed that the synthesized nanoparticles were composed of chitosan-silver nanoparticles (CS-Ag NPs) with a size of 25 nm. The chitosan fungal beads were reused in three extractions and nanoparticle synthesis before they lost their ability to produce CS-Ag NPs. The CS-Ag NPs showed potent antimicrobial activity against phytopathogenic and human pathogenic microorganisms, including Pseudomonas syringae, Escherichia coli, Staphylococcus aureus, and Candida albicans, with minimum inhibitory concentrations of 1.5, 1.6, 3.1, and 4 µg/mL, respectively. The antimicrobial activity of CS-Ag NPs was from 2- to 40-fold higher than Ag NPs synthesized using an aqueous extract of unencapsulated fungal biomass. The CS-Ag NPs were most effective at a pH of five regarding the antimicrobial activity. These results suggest that the chitosan fungal beads may be a promising alternative for the sustainable and cost-effective synthesis of CS-Ag NPs with improved antimicrobial activity.

Sandwich-Type Electrochemical Paper-Based Immunosensor for Claudin 7 and CD81 Dual Determination on Extracellular Vesicles from Breast Cancer Patients.

This study is focused on identifying novel epithelial markers in circulating extracellular vesicles (EVs) through the development of a dual sandwich-type electrochemical paper-based immunosensor for Claudin 7 and CD81 determination, as well as its validation in breast cancer (BC) patients. This immunosensor allows for rapid, sensitive, and label-free detection of these two relevant BC biomarkers. Under optimum conditions, the limit of detection for Claudin 7 was 0.4 pg mL-1, with a wide linear range of 2 to 1000 pg mL-1, while for CD81, the limit of detection was 3 pg mL-1, with a wide linear range of 0.01 to 10 ng mL-1. Finally, we validated Claudin 7 and CD81 determination in EVs from 60 BC patients and 20 healthy volunteers, reporting higher diagnostic accuracy than the one observed with classical diagnostic markers. This analysis provides a low-cost, specific, versatile, and user-friendly strategy as a robust and reliable tool for early BC diagnosis.

Nanotechnology advances for sustainable agriculture: current knowledge and prospects in plant growth modulation and nutrition.

MAIN CONCLUSION: Advances in nanotechnology make it an important tool for improving agricultural production. Strong evidence supports the role of nanomaterials as nutrients or nanocarriers for the controlled release of fertilizers to improve plant growth. Scientific research shows that nanotechnology applied in plant sciences is smart technology. Excessive application of mineral fertilizers has produced a harmful impact on the ecosystem. Furthermore, the projected increase in the human population by 2050 has led to the search for alternatives to ensure food security. Nanotechnology is a promising strategy to enhance crop productivity while minimizing fertilizer inputs. Nanofertilizers can contribute to the slow and sustainable release of nutrients to improve the efficiency of nutrient use in plants. Nanomaterial properties (i.e., size, morphology and charge) and plant physiology are crucial factors that influence the impact on plant growth. An important body of scientific research highlights the role of carbon nanomaterials, metal nanoparticles and metal oxide nanoparticles to improve plant development through the modulation of physiological and metabolic processes. Modulating nutrient concentrations, photosynthesis processes and antioxidant enzyme activities have led to increases in shoot length, root development, photosynthetic pigments and fruit yield. In parallel, nanocarriers (nanoclays, nanoparticles of hydroxyapatite, mesoporous silica and chitosan) have been shown to be an important tool for the controlled and sustainable release of conventional fertilizers to improve plant nutrition; however, the technical advances in nanofertilizers need to be accompanied by modernization of the regulations and legal frameworks to allow wider commercialization of these elements. Nanofertilizers are a promising strategy to improve plant development and nutrition, but their application in sustainable agriculture remains a great challenge. The present review summarizes the current advance of research into nanofertilizers, and their future prospects.

Current applications of nanotechnology to develop plant growth inducer agents as an innovation strategy.

Nanotechnology has been proposed as an important tool and strategy for applying new products in agriculture at the nanometer scale in order to improve the food crop at sustainability and productivity levels for contributing with the agriculture security. Nanoparticles (NPs) have been planted as an intelligent material with a large contact surface per unit mass respect to bulk-products, allowing its effect to be exerted with greater efficiency in a specific point on a plant target. Currently, NPs have been studied to be applied to various species of monocotyledonous and dicotyledonous plants. Some NPs properties such as concentration, shape, size, composition and surface functionality have the ability to regulate the NPs growth effects on the plant during germination and seedling stages under controlled and field conditions. Furthermore, several studies have tried to explain the mechanism of uptake, translocation and accumulation of NPs inside the plant at the organ and cell level, but further studies are needed to determine specific mechanisms and exact action. Nevertheless, evaluation of the toxicity effects of NPs on physiological indexes of the plant is needed to determine the effective dose without producing adverse effects on the plant and food chain. It is noteworthy that studies have indicated that nanoparticles, regardless of their nature, can be efficient inducers of plant growth. However, a series of laboratory tests are required to optimize their application conditions and their specific physiological impact on plants. In this review, we summarize the knowledge about NPs application to induce plant growth to direct future studies in order to propose NPs for technological innovation.

Negative effect of copper nanoparticles on the conjugation frequency of conjugative catabolic plasmids.

Due to their antimicrobial properties, copper nanoparticles (CuNPs) have been proposed to be used in agriculture for pest control. Pesticides removal is mainly done by microorganisms, whose genes usually are found in conjugative catabolic plasmids (CCP). The aim of this work was to evaluate if CuNPs at subinhibitory concentrations modify the conjugation frequency (CF) of two CCP (pJP4 and pADP1). CuNPs were characterized by scanning electron microscopy with an X-ray detector, dynamic light scattering and X-ray diffraction. Mating assays were done in LB broth supplemented with CuNPs (10, 20, 50 and 100 µg mL-1) or equivalent concentrations of CuSO4. Interestingly, we observed that in LB, Cu+2 release from CuNPs is fast as evaluated by atomic absorption spectrophotometry. Donor and recipient strains were able to grow in all copper concentrations assayed, but CF of mating pairs was reduced to 10% in the presence of copper at 20 or 50 µg Cu mL-1 compared to control. Thus, our results indicated that both copper forms, CuNPs or CuSO4, negatively affected the transfer of catabolic plasmids by conjugation. Since dissemination of degradative genes by conjugation contribute to degradation of pesticides by microorganisms, this work improves our understanding of the risks of using copper in agriculture soils, which could affect the biodegradative potential of microbial communities.

Green synthesis of silver nanoparticles: effect of synthesis reaction parameters on antimicrobial activity.

In this work, the biosynthesis of silver nanoparticles by Galega officinalis extract using AgNO3 as a precursor was reported. The reaction parameters for the biosynthesis and efficiency in their antimicrobial control against Escherichia coli, Staphylococcus aureus and Pseudomonas syringae were determined. For biosynthesis, a central composite design combined with response surface methodology was used to optimize the process parameters (pH, AgNO3 and extract concentration), and the design was assessed through the size distribution, zeta potential and polydispersity index of the nanoparticles. The results demonstrated that at pH 11, 1.6 mM of AgNO3 and 15% vv-1 of G. officinalis extract were the optimal reaction parameters. Transmission electron microscope (TEM) images and X-ray diffraction (XRD) confirmed the formation of small spherical silver nanoparticles. Antimicrobial assays showed a high inhibitory effect against E. coli, S. aureus and P. syringae, and that effect was larger with silver nanoparticles of a smaller size (23 nm). This work demonstrates that G. officinalis extract is a feasible medium for the synthesis of silver nanoparticles and that the control of the reaction parameters can determine the nanoparticle characteristics and therefore their antimicrobial effectiveness.

Removal of the insecticide diazinon from liquid media by free and immobilized Streptomyces sp. isolated from agricultural soil.

From an agricultural soil that had received continuous applications of organophosphorus pesticides, 30 actinobacteria strains were isolated. Two strains, identified as Streptomyces sp. AC1-6 and Streptomyces sp. ISP4, were selected because of their tolerance to diazinon and based on the relationship between diazinon removal and microbial growth. In liquid medium with diazinon at concentrations of 25 and 50 mg L(-1), both strains were able to remove approximately 40-50% and 70-90% of the initial diazinon after 24 and 96 h of incubation, respectively. This diazinon removal was accompanied by microbial growth of the strains, an initial pH decrease, and glucose consumption in the liquid medium. Evaluation of the diazinon removal achieved by the free actinobacteria and Streptomyces sp. AC1-6 immobilized on alginate beads revealed that the immobilized cells exhibited a 60% higher diazinon removal compared with the free cells. The reusability of the encapsulated biomass was confirmed, and a diazinon removal rate of more than 50% was obtained after the second batch. This work constitutes one of the few reports that describe Streptomyces strains as diazinon degraders. Given the high diazinon removal found, the streptomycetes exhibit suitable potential as diazinon-degrading actinobacteria for elimination of diazinon from liquid residues.

Potential Antifungal Effect of Copper Oxide Nanoparticles Combined with Fungicides against Botrytis cinerea and Fusarium oxysporum.

Copper oxide nanoparticles (NCuO) have emerged as an alternative to pesticides due to their antifungal effect against various phytopathogens. Combining them with fungicides represents an advantageous strategy for reducing the necessary amount of both agents to inhibit fungal growth, simultaneously reducing their environmental release. This study aimed to evaluate the antifungal activity of NCuO combined with three fungicide models separately: Iprodione (IPR), Tebuconazole (TEB), and Pyrimethanil (PYR) against two phytopathogenic fungi: Botrytis cinerea and Fusarium oxysporum. The fractional inhibitory concentration (FIC) was calculated as a synergism indicator (FIC ≤ 0.5). The NCuO interacted synergistically with TEB against both fungi and with IPR only against B. cinerea. The interaction with PYR was additive against both fungi (FIC > 0.5). The B. cinerea biomass was inhibited by 80.9% and 93% using 20 mg L-1 NCuO + 1.56 mg L-1 TEB, and 40 mg L-1 NCuO + 12 µg L-1 IPR, respectively, without significant differences compared to the inhibition provoked by 160 mg L-1 NCuO. Additionally, the protein leakage and nucleic acid release were also evaluated as mechanisms associated with the synergistic effect. The results obtained in this study revealed that combining nanoparticles with fungicides can be an adequate strategy to significantly reduce the release of metals and agrochemicals into the environment after being used as antifungals.

The mechanistic insights of essential oil of Mentha piperita to control Botrytis cinerea and the prospection of lipid nanoparticles to its application.

Botrytis cinerea is the phytopathogenic fungus responsible for the gray mold disease that affects crops worldwide. Essential oils (EOs) have emerged as a sustainable tool to reduce the adverse impact of synthetic fungicides. Nevertheless, the scarce information about the physiological mechanism action and the limitations to applying EOs has restricted its use. This study focused on elucidating the physiological action mechanisms and prospection of lipid nanoparticles to apply EO of Mentha piperita. The results showed that the EO of M. piperita at 500, 700, and 900 µL L-1 inhibited the mycelial growth at 100 %. The inhibition of spore germination of B. cinerea reached 31.43 % at 900 µL L-1. The EO of M. piperita decreased the dry weight and increased pH, electrical conductivity, and cellular material absorbing OD260 nm of cultures of B. cinerea. The fluorescence technique revealed that EO reduced hyphae width, mitochondrial activity, and viability, and increased ROS production. The formulation of EO of M. piperita loaded- solid lipid nanoparticles (SLN) at 500, 700, and 900 µL L-1 had particle size ∼ 200 nm, polydispersity index < 0.2, and stability. Also, the thermogravimetric analysis indicated that the EO of M. piperita-loaded SLN has great thermal stability at 50 °C. EO of M. piperita-loaded SLN reduced the mycelial growth of B. cinerea by 70 %, while SLN formulation (without EO) reached 42 % inhibition. These results supported that EO of M. piperita-loaded SLN is a sustainable tool for reducing the disease produced by B. cinerea.

The Catalytic Role of Superparamagnetic Iron Oxide Nanoparticles as a Support Material for TiO2 and ZnO on Chlorpyrifos Photodegradation in an Aqueous Solution.

Chlorpyrifos (CP) is a globally used pesticide with acute toxicity. This work studied the photocatalytic degradation of CP using TiO2, ZnO nanoparticles, and nanocomposites of TiO2 and ZnO supported on SPIONs (SPION@SiO2@TiO2 and SPION@SiO2@ZnO). The nanocomposites were synthesized by multi-step incipient wetness impregnation. The effects of the initial pH, catalyst type, and dose were evaluated. The nanocomposites of SPION@SiO2@TiO2 and SPION@SiO2@ZnO showed higher CP photodegradation levels than free nanoparticles, reaching 95.6% and 82.3%, respectively, at pH 7. The findings indicate that iron oxide, as a support material for TiO2 and ZnO, extended absorption edges and delayed the electron-hole recombination of the nanocomposites, improving their photocatalytic efficiency. At the same time, these nanocomposites, especially SPION@SiO2@TiO2, showed efficient degradation of 3,5,6-trichloropyridinol (TCP), one of the final metabolites of CP. The stability and reuse of this nanocomposite were also evaluated, with 74.6% efficiency found after six cycles. Therefore, this nanomaterial represents an eco-friendly, reusable, and effective alternative for the degradation of chlorpyrifos in wastewater treatment.

Advances in Nanomaterials and Composites Based on Mesoporous Materials as Antimicrobial Agents: Relevant Applications in Human Health.

Nanotechnology has emerged as a cornerstone in contemporary research, marked by the advent of advanced technologies aimed at nanoengineering materials with diverse applications, particularly to address challenges in human health. Among these challenges, antimicrobial resistance (AMR) has risen as a significant and pressing threat to public health, creating obstacles in preventing and treating persistent diseases. Despite efforts in recent decades to combat AMR, global trends indicate an ongoing and concerning increase in AMR. The primary contributors to the escalation of AMR are the misuse and overuse of various antimicrobial agents in healthcare settings. This has led to severe consequences not only in terms of compromised treatment outcomes but also in terms of substantial financial burdens. The economic impact of AMR is reflected in skyrocketing healthcare costs attributed to heightened hospital admissions and increased drug usage. To address this critical issue, it is imperative to implement effective strategies for antimicrobial therapies. This comprehensive review will explore the latest scientific breakthroughs within the metal-organic frameworks and the use of mesoporous metallic oxide derivates as antimicrobial agents. We will explore their biomedical applications in human health, shedding light on promising avenues for combating AMR. Finally, we will conclude the current state of research and offer perspectives on the future development of these nanomaterials in the ongoing battle against AMR.

Five years of advances in electrochemical analysis of protein biomarkers in lung cancer: a systematic review.

Lung cancer is the leading cause of cancer death in both men and women. It represents a public health problem that must be addressed through the early detection of specific biomarkers and effective treatment. To address this critical issue, it is imperative to implement effective methodologies for specific biomarker detection of lung cancer in real clinical samples. Electrochemical methods, including microfluidic devices and biosensors, can obtain robust results that reduce time, cost, and assay complexity. This comprehensive review will explore specific studies, methodologies, and detection limits and contribute to the depth of the discussion, making it a valuable resource for researchers and clinicians interested in lung cancer diagnosis.

Formulation of essential oils-loaded solid lipid nanoparticles-based chitosan/PVA hydrogels to control the growth of Botrytis cinerea and Penicillium expansum.

Botrytis cinerea and Penicillium expansum are phytopathogenic fungi that produce the deterioration of fruits. Thus, essential oil (EO) has emerged as a sustainable strategy to minimize the use of synthetic fungicides, but their volatility and scarce solubility restrict their application. This study proposes the EO of Oreganum vulgare and Thymus vulgaris-loaded solid lipid nanoparticles (SLN) based chitosan/PVA hydrogels to reduce the infestation of fungi phytopathogen. EO of O. vulgare and T. vulgaris-loaded SLN had a good homogeneity (0.21-0.35) and stability (-28.8 to -33.0 mV) with a mean size of 180.4-188.4 nm. The optimization of EO-loaded SLN showed that the encapsulation of 800 and 1200 µL L-1 of EO of O vulgare and T. vulgaris had the best particle size. EO-loaded SLN significantly reduced the mycelial growth and spore germination of both fungi pathogen. EO-loaded SLN into hydrogels showed appropriate physicochemical characteristics to apply under environmental conditions. Furthermore, rheological analyses evidenced that hydrogels had solid-like characteristics and elastic behavior. EO-loaded SLN-based hydrogels inhibited the spore germination in B. cinerea (80.9 %) and P. expansum (55.7 %). These results show that SLN and hydrogels are eco-friendly strategies for applying EO with antifungal activity.

Biogenic nanoparticles: copper, copper oxides, copper sulphides, complex copper nanostructures and their applications.

Copper nanoparticles have been the focus of intensive study due to their potential applications in diverse fields including biomedicine, electronics, and optics. Copper-based nanostructured materials have been used in conductive films, lubrification, nanofluids, catalysis, and also as potent antimicrobial agent. The biogenic synthesis of metallic nanostructured nanoparticles is considered to be a green and eco-friendly technology since neither harmful chemicals nor high temperatures are involved in the process. The present review discusses the synthesis of copper nanostructured nanoparticles by bacteria, fungi, and plant extracts, showing that biogenic synthesis is an economically feasible, simple and non-polluting process. Applications for biogenic copper nanoparticles are also discussed.

Nanoparticles as a Promising Strategy to Mitigate Biotic Stress in Agriculture.

Nanoparticles are recognized due to their particular physical and chemical properties, which are conferred due to their size, in the range of nanometers. Nanoparticles are recognized for their application in medicine, electronics, and the textile industry, among others, but also in agriculture. The application of nanoparticles as nanofertilizers and biostimulants can help improve growth and crop productivity, and it has therefore been mentioned as an essential tool to control the adverse effects of abiotic stress. However, nanoparticles have also been noted for their exceptional antimicrobial properties. Therefore, this work reviews the state of the art of different nanoparticles that have shown the capacity to control biotic stress in plants. In this regard, metal and metal oxide nanoparticles, polymeric nanoparticles, and others, such as silica nanoparticles, have been described. Moreover, uptake and translocation are covered. Finally, future remarks about the studies on nanoparticles and their beneficial role in biotic stress management are made.

Eco-Efficient Systems Based on Nanocarriers for the Controlled Release of Fertilizers and Pesticides: Toward Smart Agriculture.

The excessive application of pesticides and fertilizers has generated losses in biological diversity, environmental pollution, and harmful effects on human health. Under this context, nanotechnology constitutes an innovative tool to alleviate these problems. Notably, applying nanocarriers as controlled release systems (CRSs) for agrochemicals can overcome the limitations of conventional products. A CRS for agrochemicals is an eco-friendly strategy for the ecosystem and human health. Nanopesticides based on synthetic and natural polymers, nanoemulsions, lipid nanoparticles, and nanofibers reduce phytopathogens and plant diseases. Nanoproducts designed with an environmentally responsive, controlled release offer great potential to create formulations that respond to specific environmental stimuli. The formulation of nanofertilizers is focused on enhancing the action of nutrients and growth stimulators, which show an improved nutrient release with site-specific action using nanohydroxyapatite, nanoclays, chitosan nanoparticles, mesoporous silica nanoparticles, and amorphous calcium phosphate. However, despite the noticeable results for nanopesticides and nanofertilizers, research still needs to be improved. Here, we review the relevant antecedents in this topic and discuss limitations and future challenges.

Pharmacological applications of nitric oxide-releasing biomaterials in human skin.

Nitric oxide (NO) is an important endogenous molecule that plays several roles in biological systems. NO is synthesized in human skin by three isoforms of nitric oxide synthase (NOS) and, depending on the produced NO concentration, it can actuate in wound healing, dermal vasodilation, or skin defense against different pathogens, for example. Besides being endogenously produced, NO-based pharmacological formulations have been developed for dermatological applications targeting diverse pathologies such as bacterial infection, wound healing, leishmaniasis, and even esthetic issues such as acne and skin aging. Recent strategies focus mainly on developing smart NO-releasing nanomaterials/biomaterials, as they enable a sustained and targeted NO release, promoting an improved therapeutic effect. This review aims to overview and discuss the main mechanisms of NO in human skin, the recent progress in the field of dermatological formulations containing NO, and their application in several skin diseases, highlighting promising advances and future perspectives in the field.

Melanin Induction Restores the Pathogenicity of Gaeumannomyces graminis var. tritici in Wheat Plants.

One of the most challenging aspects of long-term research based on microorganisms is the maintenance of isolates under ex situ conditions, particularly the conservation of phytopathological characteristics. Our research group has worked for more than 10 years with Gaumannomyces graminis var. tritici (Ggt), the main biotic factor affecting wheat. In this sense we preserved the microorganisms in oil overlaid. However, several strains preserved for a long time lost their pathogenicity. These strains show white and non-infective mycelia. In this sense, we hypothesized that this is attributable to low melanin content. Melanin is a natural pigment mainly involved in UV protection, desiccation, salinity, oxidation, and fungal pathogenicity. Therefore, understanding the melanin role on Ggt pathogenicity is fundamental to developing melanin activation strategies under laboratory studies. In this study, we induce melanin activation by UV-A light chamber, 320 to 400 nm (T1) and temperature changes of 30 °C, 15 °C, and 20 °C (T2). Fungal pathogenicity was evaluated by determination of blackening roots and Ggt was quantified by real-time PCR in inoculated wheat plants. Results revealed that Ggt grown under UV-A (T1) conditions showed around 40% higher melanin level with a concomitant effect on root infection (98% of blackened roots) and 4-fold more Ggt genome copy number compared with the control (non-infective mycelia) being T1, a more inductor factor compared with T2. These findings would support the role of melanin in pathogenicity in darkly pigmented fungi such as Ggt and could serve as a basis for activating pathogenicity under laboratory conditions.

Meta-analysis of metal nanoparticles degrading pesticides: what parameters are relevant?

The rise in the global population demands an increasing food supply and methods to boost agricultural production. Pesticides are necessary for agricultural production models, avoiding losses of close to 40%. Nevertheless, the extensive use of pesticides can cause their accumulation in the environment, causing problems for human health, biota, and ecosystems. Thus, new technologies have emerged to remove these wastes efficiently. In recent years, metal and metal oxide nanoparticles (MNPs) have been reported as promising catalysts to degrade pesticides; however, a systematic understanding of their effect on pesticide degradation is still required. Therefore, this study focused on a meta-analysis of articles available in Elsevier's Scopus and Thomas Reuters Web of Science, found by searching for "nanoparticle pesticide" and "pesticide contamination." After passing different filters, the meta-analysis was performed with 408 observations from 94 reviews, which comprise insecticides, herbicides, and fungicides, including organophosphates, organochlorines, carbamates, triazines, and neonicotinoids. Herein, 14 different MNPs (Ag, Ni, Pd, Co3O4, BiOBr, Au, ZnO, Fe, TiO2, Cu, WO3, ZnS, SnO2, and Fe0), improved pesticide degradation, with the highest degradation rates achieved by Ag (85%) and Ni (82.5%). Additionally, the impact of the MNP functionalization, size, and concentration on pesticide degradation was quantified and compared. In general, the degradation rate increased when the MNPs were functionalized (~ 70%) compared to naked (~ 49%). Also, the particle size significantly affected the degradation of pesticides. To our knowledge, this study is the first meta-analysis performed about the impact of MNPs on pesticide degradation, providing an essential scientific basis for future studies.

Antioxidant Activity as an Indicator of the Efficiency of Plant Extract-Mediated Synthesis of Zinc Oxide Nanoparticles.

The green synthesis of zinc oxide nanoparticles (ZnO NPs) using a diverse range of plant species has been extensively reported. Despite the success achieved by biogenic synthesis, there are problems with the control and prediction of the properties of ZnO NPs, due to phytochemical diversity between plant species. In this sense, the main objective of our work was to investigate the effect of the antioxidant activity (AA) of plant extracts on the physicochemical characteristics of ZnO NPs (production yield, chemical composition, polydispersity index (PDI), surface charge (ζ-potential) and average particle size). In order to accomplish this objective, four plant extract with different antioxidant activities were used: Galega officinalis, Buddleja globosa, Eucalyptus globulus, and Aristotelia chilensis. Phytochemical screening, quantitative analysis of phenolic compounds and antioxidant activity determination of the different extracts were carried out. Chemical species such as catechin, malvidin, quercetin, caffeic acid, and ellagic acid were the dominant components, found in the extracts studied. The A. chilensis extract showed the highest value of total phenolic compounds (TPC) and AA, followed by E. globulus, B. globosa and G. officinalis. Zetasizer, Fourier-transform infrared (FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA) data show that plant extracts with lower AA leads to a decrease in the yield of ZnO NPs and an increase in the amount of residual organic extract that remains on the particles. The latter caused an increase in the average particle size, PDI and ζ-potential as a consequence of agglomeration and particle coarsening. Our result suggest that it is possible to use the AA as an indicator of the potential reducing capacity of plant extracts. In this way it is possible to guarantee the reproducibility of the synthesis process as well as ensure the formation of ZnO NPs with desired characteristics.