Online large volume sample staking preconcentration and separation of enantiomeric GHRH analogs by capillary electrophoresis.

A capillary electrophoresis method is proposed to analyze the four most well-known growth hormone-releasing hormone (GHRH) analogs that are misused by athletes. Dimethyl-ß-cyclodextrin used as a chiral selector allowed, for the first time, the separation of those basic peptide analogs, including enantiopeptides (sermorelin and CJC-1293) that differ by the chirality of only one amino acid. To increase the method sensitivity, electrokinetic preconcentration methods have been investigated. The large volume sample stacking with polarity switching (PS-LVSS) method with an injected sample volume corresponding to 80% of the capillary one was found superior to the sweeping in terms of signal enhancement factor (SEF). Acid and organic solvent addition to the sample (0.1 mM phosphoric acid with 30% methanol) led to a twofold signal improvement, when compared to water as a matrix. We increased capillary dimensions to provide a signal enhancement through the injection of a larger sample volume. Finally, using a combination of the optimized PS-LVSS preconcentration with the chiral capillary zone electrophoresis (CZE), the GHRH analogs were separated and limits of detection between 75 and 200 ng/mL were reached. This method was successfully applied to urine after a desalting step. An optimized C18 SPE was used for that purpose in order to provide low sample conductivity (<130 µS/cm) and preserve the efficiency of LVSS preconcentration. SEF of 640 was obtained with desalted urine spiked with sermorelin by comparison to the CZE (without preconcentration) method.

Capillary Electrophoresis-Mass Spectrometry at Trial by Metabo-Ring: Effective Electrophoretic Mobility for Reproducible and Robust Compound Annotation.

Capillary zone electrophoresis-mass spectrometry (CE-MS) is a mature analytical tool for the efficient profiling of (highly) polar and ionizable compounds. However, the use of CE-MS in comparison to other separation techniques remains underrepresented in metabolomics, as this analytical approach is still perceived as technically challenging and less reproducible, notably for migration time. The latter is key for a reliable comparison of metabolic profiles and for unknown biomarker identification that is complementary to high resolution MS/MS. In this work, we present the results of a Metabo-ring trial involving 16 CE-MS platforms among 13 different laboratories spanning two continents. The goal was to assess the reproducibility and identification capability of CE-MS by employing effective electrophoretic mobility (µeff) as the key parameter in comparison to the relative migration time (RMT) approach. For this purpose, a representative cationic metabolite mixture in water, pretreated human plasma, and urine samples spiked with the same metabolite mixture were used and distributed for analysis by all laboratories. The µeff was determined for all metabolites spiked into each sample. The background electrolyte (BGE) was prepared and employed by each participating lab following the same protocol. All other parameters (capillary, interface, injection volume, voltage ramp, temperature, capillary conditioning, and rinsing procedure, etc.) were left to the discretion of the contributing laboratories. The results revealed that the reproducibility of the µeff for 20 out of the 21 model compounds was below 3.1% vs 10.9% for RMT, regardless of the huge heterogeneity in experimental conditions and platforms across the 13 laboratories. Overall, this Metabo-ring trial demonstrated that CE-MS is a viable and reproducible approach for metabolomics.

A lab-on-a-chip for monolith-based preconcentration and electrophoresis separation of phosphopeptides.

A microdevice combining online preconcentration and separation of phosphopeptides was developed in a glass microchip. An ethylene glycol methacrylate phosphate (EGMP), acrylamide (AM) and bisacrylamide (BAA) based monolith was synthesized within microchannels through a photo-driven process. Morphological investigations revealed a homogeneous monolithic structure composed of uniform nodules (∼0.8 µm), with a large pore volume (0.62 cm3 g-1) and sufficiently high specific surface area (34.1 m2 g-1). These features make the monolith particularly interesting for preconcentration purposes. Immobilization of Zr4+ ions on the phosphate groups present at the poly(EGMP-co-AM-co-BAA) monolith surface leads to immobilized metal affinity chromatography support. This monolith-Zr4+ showed a great capacity to capture phosphopeptides. Successful preconcentration and separation of a mixture of ERK2 derived peptides differing only by their phosphorylation degree and sites could be achieved with signal enhancement factors between 340 and 910 after only 7 min of preconcentration. This integrated microdevice represents a novel approach for phosphoproteomic applications.

Microscope-assisted UV-initiated preparation of well-defined porous polymer monolithic plugs in glass microchips for peptide preconcentration.

Herein, highly defined monolithic beds were prepared in glass microchips by photopolymerization of ethylene glycol methacrylate phosphate (EGMP), acrylamide, and N,N'-methylenebisacrylamide (BAA) using an epifluorescence microscope as UV-irradiation source. Such a fast and easy method allowed precise control of (i) the edge shape, (ii) the location along the microchannel, and (iii) the length of the monolithic plugs within glass microchips. The addition of hydroquinone, a polymerization inhibitor, to the prepolymerization mixture was beneficial for achieving local and robust incorporation of monoliths with sharp edges within microchannels. The monolith length was easily tuned from 160 to 400 µm through simple change in the magnification of the objective and was found to be repeatable (relative standard deviation <7.5%). Further application for on-chip monolith-assisted solid - phase extraction is demonstrated for fluorescently labeled peptide. Both binding and subsequent elution behaviors were found to fully agree with a cation-exchange mechanism in concordance with the presence of phosphate groups at the monolith surface. Graphical abstract In-chip microscope-UV-synthesis of monolithic plugs with sharp edges.

Efficient extraction of intact HSA-Aß peptide complexes from sera: Toward albuminome biomarker identification.

The performances of three commercial albumin extraction methods for the isolation of intact albumin-amyloid beta peptide (HSA-Aß) complexes from serum were compared using different analytical approaches. To determine the extraction yield, the repeatability and the selectivity of the extraction procedures, a capillary electrophoresis coupled to UV detection method was developed. For the evaluation of the specificity and integrity of the extracted HSA-Aß complexes, SDS-PAGE, hybrid and ultra-sensitive ELISA experiments were conducted. All the extraction methods showed different characteristics depending on their chemical binding affinities toward albumin. The ProteoExtract Albumin Depletion kit extracted albumin with a high repeatability but was not efficient for the extraction of intact HSA-Aß complexes. The PureProteome Albumin magnetic beads showed a high specificity toward HSA thanks to the grafting of anti-HSA antibodies on their surface but tended to dissociate HSA from Aß peptides. The Pierce Albumin depletion kit showed a high extraction yield, no selectivity towards the different albumin proteoforms and proved to be the most efficient method for the extraction of intact HSA-Aß complexes from serum.

CDG biochemical screening: Where do we stand?

BACKGROUND: Glycosylation is one of the most complex post-translational modifications of proteins and lipids, notably requiring many glycosyltransferases, glycosidases and sugar transporters encoded by about 1-2% of all human genes. Deleterious variants in any of them may result in improper protein or lipid glycosylation, thus yielding the so-called 'congenital disorders of glycosylation' or CDG. SCOPE OF REVIEW: We first review the current state of knowledge on the common blood and cellular glycoproteins used in the biochemical screening of CDG, as well as the emerging ones for an improved diagnosis. We then provide an overview of the current state-of-the-art methodologies ranging from gel electrophoresis to mass spectrometry to measure improper glycosylation. Finally, we discuss how additional tools such as metabolomics and microfluidics can be added to the current toolbox to better diagnose and delineate CDG. MAJOR CONCLUSIONS: Combining several biochemical indicators and related methods is often required to cope with the large clinical heterogeneity of CDG and establish a definitive diagnosis. GENERAL SIGNIFICANCE: This review aims to critically present current available CDG biochemical biomarkers and dedicated methods in the context of highly diverse glycosylation pathways and related inherited diseases.

On-line enrichment of N-glycans by immobilized metal-affinity monolith for capillary electrophoresis analysis.

A novel N-glycan enrichment strategy is presented using unexpected but strong interactions between the sulfonate groups brought by the fluorescent dye of glycans and the Zr4+ modified poly(ethylene glycol methacrylate phosphate (EGMP)-co-acrylamide (AM)-co-bis-acrylamide (BAA)) monolith. The poly (EGMP-co-AM-co-BAA) monolith was synthesized via ultraviolet (UV) irradiation and then functionalized with Zr4+. The obtained monolith was characterized with scanning electron microscopy and mercury intrusion porosimetry. Large through-pores and a continuous skeleton with high permeability were observed. The N-glycans were labeled with the 1-aminopyrene-3, 6, 8-trisulfonic acid (APTS) and enriched by the Zr4+ modified monolith through IMAC interaction. This enrichment step was then coupled off-line to capillary electrophoresis (CE) separation with laser induced fluorescence (LIF) detection. Successful preconcentration of the APTS labeled maltooligosaccharide ladder was achieved under optimized conditions. Enrichment factors obtained for the maltooligosaccharides ranged from 9 to 24 with RSDs from 2.0% to 9.2% (n = 3). Moreover, very good repeatabilities (<6.7%) were obtained for glucose oligomers (4-15 glucose units) corresponding to sizes expected for N-glycans, demonstrating the great potential of this Zr4+ modified monolith to enrich APTS labeled glycans from N-glycoproteins. The proposed method was then successfully applied for the enrichment of N-glycans released from Ribonuclease B, in which case all five expected oligomannose glycans (Man 5 to Man 9) were successfully enriched. Thanks to the advantage of the method to enrich selectively APTS-glycans compared to the commercial SPE columns composed of HILIC or PGC materials, the first proof of concept of on-line enrichment coupled to CE-LIF separation was demonstrated for maltooligosaccharides as well.

Capillary zone electrophoresis-native mass spectrometry for the quality control of intact therapeutic monoclonal antibodies.

Therapeutic monoclonal antibodies (mAbs) are complex glycoproteins and ensuring their safety, efficacy and quality is still challenging. Indeed, during their manufacturing process, they are exposed to several stresses that can lead to their denaturation, misfolding or dimerization. We report here a new method based on capillary electrophoresis coupled to native mass spectrometry (MS) with a sheath liquid interface to analyze an intact therapeutic mAb, Infliximab, under non-denaturing conditions that preserve its conformational heterogeneity as well as self-association without inducing further unfolding / denaturation. For capillary zone electrophoresis (CZE) separation, a triple layer coating using polybrene-dextran sulfate-polybrene was employed. A sheath liquid composed of isopropanol - water - acetic acid with a flow rate of 10 µL min-1 and mild MS conditions allowed optimal signal intensities. A specific mass spectrum was obtained for each Infliximab conformation in a "stressed" formulated preparation. This is the first time that within a single analysis different conformational states, i.e. native and unfolded monomers as well as dimers are simultaneously detected. The results and the lack of analytical bias arising from the CZE-MS conditions were confirmed by using atomic force microscopy (AFM) as an orthogonal technique. A middle-up approach combined to CZE-MS analysis of the stressed samples suggested that the dimer formation involved mostly Fab-Fab interactions.

Solid supports for extraction and preconcentration of proteins and peptides in microfluidic devices: A review.

Determination of proteins and peptides is among the main challenges of today's bioanalytical chemistry. The application of microchip technology in this field is an exhaustively developed concept that aims to create integrated and fully automated analytical devices able to quantify or detect one or several proteins from a complex matrix. Selective extraction and preconcentration of targeted proteins and peptides especially from biological fluids is of the highest importance for a successful realization of these microsystems. Incorporation of solid structures or supports is a convenient solution employed to face these demands. This review presents a critical view on the latest achievements in sample processing techniques for protein determination using solid supports in microfluidics. The study covers the period from 2006 to 2015 and focuses mainly on the strategies based on microbeads, monolithic materials and membranes. Less common approaches are also briefly discussed. The reviewed literature suggests future trends which are discussed in the concluding remarks.

Characterization of conformers and dimers of antithrombin by capillary electrophoresis-quadrupole-time-of-flight mass spectrometry.

Antithrombin (AT) is a plasma glycoprotein which possesses anticoagulant and anti-inflammatory properties. AT exhibits various forms, among which are native, latent and heterodimeric ones. We studied the potential of capillary electrophoresis-mass spectrometry (CE-MS) using a sheath liquid interface, electrospray ionization (ESI), and a quadrupole-time-of-flight (Q-TOF) mass spectrometer to separate and quantify the different AT forms. For CE separation, a neutral polyvinyl alcohol (PVA) coated capillary was employed. The protein conformation was preserved by using a background electrolyte (BGE) at physiological pH. A sheath liquid of isopropanol-water 50:50 (v/v) with 14 mM ammonium acetate delivered at a flow rate of 120 µL h-1 resulted in optimal signal intensities. Each AT form exhibited a specific mass spectrum, allowing unambiguous distinction. Several co-injection experiments proved that latent AT had a higher electrophoretic mobility (µep) than native AT, and that these conformers could associate to form a heterodimer during the CE analysis. The developed CE-MS method enabled the detection and quantitation of latent and heterodimeric forms in a commercial AT preparation stored at room temperature for three weeks.

Recent innovations in protein separation on microchips by electrophoretic methods.

Microchips for analytical purposes have attracted great attention over the last 20 years. In the present review, we focus on the most recent development of microchips for electrophoretic separation of proteins. This review starts with a short recalling about the microchips covering the basic microchip layout for CE and the commercial chips and microchip platforms. A short paragraph is dedicated to the surface treatment of microchips, which is of paramount importance in protein analysis. One section is dedicated to on-line sample pretreatment in microchips and summarizes different strategies to pre-concentrate or to purify proteins from complex matrixes. Most of the common modes used for CE of proteins have already been adapted to the chip format, while multidimensional approaches are still in progress. The different routes to achieve detection in microchip are also presented with a special attention to derivatization or labeling of proteins. Finally, several recent applications are mentioned. They highlight the great potential of electrophoretic separations of proteins in numerous fields such as biological, pharmaceutical or agricultural and food analysis. A bibliography with 151 references is provided covering papers published from 2000 to the early 2007.

Selection of two reliable parameters to evaluate the impact of the mobile-phase composition on capillary electrochromatography performance with monolithic and particle-packed capillary columns.

Different models have been described in the literature to evaluate the total porosity of CEC columns: gravimetric, flow as well as conductivity-based methods. In this study, these models have been compared for two kinds of CEC columns: two mixed-mode silica particle stationary phases and different monolithic columns (acrylate or polystyrene divinylbenzene-based). The total porosities measured from the conductivity-based methods were lower than the total column porosities obtained by gravimetric or flow methods for all the investigated columns while the wide distribution of observed values shows that conductivity-based methods discriminate columns more efficiently with very different properties. We propose a conductivity-based method taking into account the actual length proposed by Horvath, to evaluate what we call an "actual electrokinetic" porosity (AEP). This parameter, based on electrokinetic theory only, affords the most consistent evaluation of porosity under experimental CEC conditions for the packed- and acrylate-based monolithic columns. To illustrate the potential of AEP and actual EOF for the estimation of the performances of a CEC system (stationary and mobile phases) we studied the influence of the mobile-phase composition on these parameters for CEC separations with an ammonium embedded packed stationary phase. The AEP and the actual electroosmotic mobility should allow a better understanding of the perfusive EOF and stationary-phase wettability. For neutral compounds (substituted phenols), AEP evaluation allowed us to predict the mobile-phase conditions able to enhance the efficiency while both AEP and actual EOF had to be considered in the case of peptide analysis.