RESUMO
While durian shell is often discharged into landfills, this waste can be a potential and zero-cost raw material to synthesize carbon-based adsorbents with purposes of saving costs and minimizing environmental contamination. Indole (IDO) is one of serious organic pollutants that influence aquatic species and human health; hence, the necessity for IDO removal is worth considering. Here, we synthesized a magnetic composite, denoted as MFOAC, based on activated carbon (AC) derived from durian shell waste incorporated with MnFe2O4 (MFO) to adsorb IDO in water. MFOAC showed a microporous structure, along with a high surface area and pore volume, at 518.9 m2/g, and 0.106 cm3/g, respectively. Optimization of factors affecting the IDO removal of MFOAC were implemented by Box-Behnken design and response surface methodology. Adsorption kinetics and isotherms suggested a suitable model for MFOAC to remove IDO. MFOAC was recyclable with 3 cycles. Main interactions involving in the IDO adsorption mechanism onto MFOAC were clarified, including pore filling, n-π interaction, π-π interaction, Yoshida H-bonding, H-bonding.
Assuntos
Carvão Vegetal , Compostos Férricos , Indóis , Compostos de Manganês , Poluentes Químicos da Água , Indóis/química , Poluentes Químicos da Água/química , Adsorção , Compostos de Manganês/química , Compostos Férricos/química , Carvão Vegetal/química , Animais , Purificação da Água/métodosRESUMO
The worldwide demand for antibiotics has experienced a notable surge, propelled by the repercussions of the COVID-19 pandemic and advancements in the global healthcare sector. A prominent challenge confronting humanity is the unregulated release of antibiotic-laden wastewater into the environment, posing significant threats to public health. The adoption of affordable carbon-based adsorbents emerges as a promising strategy for mitigating the contamination of antibiotic wastewater. Here, we report the synthesis of novel porous carbons (MPC) through a direct pyrolysis of MIL-53-NH2(Al) and tannic acid (TANA) under N2 atmosphere at 800 °C for 4 h. The effect of TANA amount ratios (0%-20%, wt wt-1) on porous carbon structure and adsorption performance was investigated. Results showed that TANA modification resulted in decreased surface area (1,600 m2 g-1-949 m2 g-1) and pore volume (2.3 cm3 g-1-1.7 cm3 g-1), but supplied hydroxyl functional groups. Adsorption kinetic, intraparticle diffusion, and isotherm were examined, indicating the best fit of Elovich and Langmuir models. 10%-TANA-MPC obtained an ultrahigh adsorption capacity of 564.4 mg g-1, which was approximately 2.1 times higher than that of unmodified porous carbon. 10%-TANA-MPC could be easily recycled up to 5 times, and after reuse, this adsorbent still remained highly stable in morphology and surface area. The contribution of H bonding, pore-filling, electrostatic and π-π interactions to chloramphenicol adsorption was clarified. It is recommended that TANA-modified MIL-53-NH2(Al)-derived porous carbons act as a potential adsorbent for removal of pollutants effectively.
RESUMO
Currently, plastic waste and antibiotic wastewater are two of the most critical environmental problems, calling for urgent measures to take. A waste-to-wealth strategy for the conversion of polyethylene terephthalate (PET) plastic bottles into value-added materials such as carbon composite is highly recommended to clean wastewater contaminated by antibiotics. Inspired by this idea, we develop a novel PET-AC-ZFO composite by incorporating PET plastic-derived KOH-activated carbon (AC) with ZnFe2O4 (ZFO) particles for adsorptive removal of tetracycline (TTC). PET-derived carbon (PET-C), KOH-activated PET-derived carbon (PET-AC), and PET-AC-ZFO were characterized using physicochemical analyses. Central composite design (CCD) was used to obtain a quadratic model by TTC concentration (K), adsorbent dosage (L), and pH (M). PET-AC-ZFO possessed micropores (d ≈ 2 nm) and exceptionally high surface area of 1110 m2 g-1. Nearly 90% TTC could be removed by PET-AC-ZFO composite. Bangham kinetic and Langmuir isotherm were two most fitted models. Theoretical maximum TTC adsorption capacity was 45.1 mg g-1. This study suggested the role of hydrogen bonds, pore-filling interactions, and π-π interactions as the main interactions of the adsorption process. Thus, a strategy for conversion of PET bottles into PET-AC-ZFO can contribute to both plastic recycling and antibiotic wastewater mitigation.
Assuntos
Antibacterianos , Carbono , Tetraciclina , Poluentes Químicos da Água , Adsorção , Poluentes Químicos da Água/química , Poluentes Químicos da Água/análise , Tetraciclina/química , Antibacterianos/química , Carbono/química , Plásticos/química , Purificação da Água/métodos , Águas Residuárias/química , Polietilenotereftalatos/químicaRESUMO
Tetracycline (TCC) and sulfadiazine (SDZ) are two of the most consumed antibiotics for human therapies and bacterial infection treatments in aquafarming fields, but their accumulative residues can result in negative effects on water and aquatic microorganisms. Removal techniques are therefore required to purify water before use. Herein, we concentrate on adsorptive removal of TCC and SDZ using cobalt@carbon nanotubes (Co@CNTs) derived from Co-ZIF-67. The presence of CNTs on the edge of nanocomposites was observed. Taguchi orthogonal array was designed with four variables including initial concentration (5-20 mg L-1), dosage (0.05-0.2 g L-1), time (60-240 min), and pH (2-10). Concentration and pH were found to be main contributors to adsorption of tetracycline and sulfadiazine, respectively. The optimum condition was found at concentration 5 mg L-1, dosage 0.2 g L-1, contact time 240 min, and pH 7 for both TCC and SDZ removals. Confirmation tests showed that Co@CNTs-700 removed 99.6% of TCC and 97.3% of SDZ with small errors (3-5.5%). Moreover, the kinetic and isotherm were studied, which kinetic and isotherm data were best fitted with pseudo second-order model and Langmuir. Maximum adsorption capacity values for TCC and SDZ were determined at 118.4-174.1 mg g-1 for 180 min. We also proposed the main role of interactions such as hydrogen bonding, π-π stacking, and electrostatic attraction in the adsorption of antibiotics. With high adsorption performance, Co@CNTs-700 is expected to remove antibiotics efficiently from wastewater.
Assuntos
Nanocompostos , Nanotubos de Carbono , Poluentes Químicos da Água , Humanos , Antibacterianos , Sulfadiazina , Nanotubos de Carbono/química , Tetraciclina , Água , Nanocompostos/química , Adsorção , Poluentes Químicos da Água/análise , Cinética , Concentração de Íons de HidrogênioRESUMO
MnO2 nanoparticles have played a vital role in biomedical, catalysis, electrochemical and energy storage fields, but requiring toxic chemicals in the fabrication intercepts their applications. There is an increasing demand for biosynthesis of MnO2 nanoparticles using green sources such as plant species in accordance with the purposes of environmental mitigation and production cost reduction. Here, we review recent advancements on the use of natural compounds such as polyphenols, reducing sugars, quercetins, etc. Extracted directly from low-cost and available plants for biogenic synthesis of MnO2 nanoparticles. Role of these phytochemicals and formation mechanism of bio-medicated MnO2 nanoparticles are shed light on. MnO2 nanoparticles own small particle size, high crystallinity, diverse morphology, high surface area and stability. Thanks to higher biocompatibility, bio-mediated synthesized MnO2 nanoparticles exhibited better antibacterial, antifungal, and anticancer activity than chemically synthesized ones. In terms of wastewater treatment and energy storage, they also served as efficient adsorbents and catalyst. Moreover, several aspects of limitation and future outlook of bio-mediated MnO2 nanoparticles in the fields are analyzed. It is expected that the present work not only expands systematic understandings of synthesis methods, properties and applications MnO2 nanoparticles but also pave the way for the nanotechnology revolution in combination with green chemistry and sustainable development.
Assuntos
Nanopartículas Metálicas , Nanopartículas , Compostos de Manganês/química , Óxidos/química , Química Verde , Nanopartículas/química , Nanotecnologia/métodos , Plantas , Nanopartículas Metálicas/químicaRESUMO
Nowadays, emerging hazardous pollutants have caused many harmful effects on the environment and human health, calling for the state of the art methods for detection, qualification, and treatment. Metal-organic frameworks are porous, flexible, and versatile materials with unique structural properties, which can solve such problems. In this work, we reviewed the synthesis, activation, and characterization, and potential applications of NH2-MIL-53(Al). This material exhibited intriguing breathing effects, and obtained very high surface areas (182.3-1934 m2/g) with diverse morphologies. More importantly, NH2-MIL-53(Al) based materials could be used for the detection and removal of various toxic pollutants such as organic dyes, pharmaceuticals, herbicides, insecticides, phenols, heavy metals, and fluorides. We shed light on plausible adsorption mechanisms such as hydrogen bonds, π-π stacking interactions, and electrostatic interactions onto NH2-MIL-53(Al) adsorbents. Interestingly, NH2-MIL-53(Al) based adsorbents could be recycled for many cycles with high stability. This review also recommended that NH2-MIL-53(Al) based materials can be a good platform for the environmental remediation fields.
Assuntos
Poluentes Ambientais , Estruturas Metalorgânicas , Humanos , AdsorçãoRESUMO
The occurrence of textile dyeing wastewater discharged into the environment has been recently increasing, resulting in harmful effects on living organisms and human health. The use of green nanoparticles for water decontamination has received much attention. Floral waste can be extracted with the release of natural compounds, which act as reducing and stabilizing agents during the biosynthesis of nanoparticles. Herein, we report the utilization of Chrysanthemum spp. floral waste extract to synthesize green ZnFe2O4@ZnO (ZFOZx) nanocomposites for the photocatalytic degradation of Congo red under solar light irradiation. The various molar ratio of ZnFe2O4 (0-50%) was incorporated into ZnO nanoparticles. The surface area of green ZFOZx nanocomposites was found to increase (7.41-42.66 m2 g-1) while their band gap energy decreased from 1.98 eV to 1.92 eV. Moreover, the results exhibited the highest Congo red dye degradation efficiency of 94.85% at a concentration of 5.0 mg L-1, and a catalyst dosage of 0.33 g L-1. The â¢O2- reactive species played a vital role in the photocatalytic degradation of Congo red dye. Green ZFOZ3 nanocomposites had good recyclability with at least three cycles, and an excellent stability. The germination results showed that wastewater treated by ZFOZ3 was safe enough for bean seed germination. We expect that this work contributes significantly to developing novel green bio-based nanomaterials for environmental remediation as well as reducing the harm caused by flower wastes.
Assuntos
Chrysanthemum , Nanocompostos , Óxido de Zinco , Humanos , Vermelho Congo , Águas ResiduáriasRESUMO
OBJECTIVES: Though menstrual and reproductive factors have been associated with the risk of breast cancer in many populations, very few studies have been conducted among Vietnamese women. This study aimed to assess the association between menstrual and reproductive factors and the risk of breast cancer in Vietnamese women. METHODS: A retrospective case-control study of 490 breast cancer cases and 468 controls was conducted in Northern Vietnam. Unconditional logistic regression models adjusting for confounders were used to estimate odds ratios (ORs) and their 95% confidence intervals (CIs) for the associations of menstrual and reproductive factors with the risk of breast cancer; overall and by cancer subtype. RESULTS: Among breast cancer patients, the luminal B subtype was the most frequent (48.6%), followed by HER2-overexpressing (24.5%), luminal A (16.7%), and triple-negative breast cancer (TNBC; 10.2%). Among menopausal women, menopausal age at 50 years or older (OR = 1.71, 95% CI: 1.15-2.57 vs. <50 y) was associated with an increased risk of breast cancer. Earlier age at menarche (<13 y) was associated with a significantly increased risk of breast cancer (OR = 2.66, 95% CI: 1.08-7.51) among premenopausal women only and the luminal A subtype of breast cancer (OR = 3.06, 95% CI: 1.04-8.16). Having more than two children was associated with a reduced risk of premenopausal (OR = .42, 95%CI: .21-.83), luminal B (OR = .43, 95% CI: .24-.79), and TNBC (OR = .34, 95% CI: .14-.89). Later menopause was positively associated with the risk of breast cancer with HER2 overexpression (OR = 2.19, 95% CI: 1.14-4.23). CONCLUSION: Associations of menstrual and reproductive factors with breast cancer among Vietnamese women, particularly for among premenopausal women and for the luminal A subtype, are generally consistent with those reported from other countries. These findings suggest that changes in menstrual and reproductive patterns among young Vietnamese women may contribute to the recent rising incidence of breast cancer in Vietnam.
Assuntos
Neoplasias da Mama , Neoplasias de Mama Triplo Negativas , Criança , Humanos , Feminino , Pessoa de Meia-Idade , Neoplasias da Mama/epidemiologia , Neoplasias da Mama/complicações , Estudos de Casos e Controles , Neoplasias de Mama Triplo Negativas/epidemiologia , Estudos Retrospectivos , Vietnã/epidemiologia , Fatores de Risco , Povo Asiático , Receptores de Progesterona , Receptor ErbB-2RESUMO
The pollution of organic dyes such as malachite green is one of the globally critical issues, calling for efficient mitigation methods. Herein, we developed green Mn3O4 nanoparticles synthesized using natural compounds extracted from Costus woodsonii flowers under an ultrasound-assisted mode. The materials were characterized using several physicochemical techniques such as Fourier-transform infrared spectroscopy, X-ray diffraction, Energy-dispersive X-ray spectroscopy, scanning electron microscopy, Raman spectroscopy, and N2 adsorption desorption isotherm measurement. The X-ray diffraction and N2 isotherm plots confirmed the presence of tetragonal γ-Mn3O4 phase and mesoporous structure, respectively. Carbonyl groups derived from flavonoids or carboxylic compounds were found in the surface of green Mn3O4 nanoparticles. The effect of pH, contact time, dose, and concentration on the adsorption of malachite green over green Mn3O4 was carried out. The maximum malachite green adsorption capacity for green Mn3O4 nanoparticles was 101-162 mg g-1. Moreover, kinetic and isotherm adsorption of malachite green obeyed Langmuir (Radj.2 = 0.980-0.995) and pseudo first-order models (Radj.2 = 0.996-1.00), respectively. Adsorption of malachite green over green Mn3O4 was a thermodynamically spontaneous process due to negative Gibbs free energy values (ΔGο < 0). Green Mn3O4 nanoparticles offered a high stability through the FR-IR spectra analysis. With a good recyclability of 4 cycles, green Mn3O4 nanoparticles can be used as potential adsorbent for removing malachite green dye from water.
Assuntos
Costus , Nanopartículas , Poluentes Químicos da Água , Adsorção , Flores/química , Concentração de Íons de Hidrogênio , Cinética , Corantes de Rosanilina , Poluentes Químicos da Água/análiseRESUMO
The global occurrence of textile dyes pollution has recently emerged, posing a serious threat to ecological systems. To abate dye contamination, we here developed a novel magnetic porous CoFe2O4@MIL-53(Al) nanocomposite by incorporating magnetic CoFe2O4 nanoparticles with MIL-53(Al) metal-organic framework. This nanocomposite possessed a surface area of 197.144 m2 g-1 and a pore volume of 0.413 cm3 g-1. The effect of contact time (5-120 min), concentration (5-50 mg L-1), dosage (0.1-1.0 g L-1), and pH (2-10) on Congo red adsorption was clarified. CoFe2O4@MIL-53(Al) could remove 95.85% of Cong red dye from water with an accelerated kinetic rate of 0.6544 min-1 within 10 min. The kinetic and isotherm models showed the predominance of Bangham and Temkin. According to Langmuir, the maximum uptake capacities of CoFe2O4@MIL-53(Al), CoFe2O4, and MIL-53(Al) adsorbents were 43.768, 17.982, and 15.295 mg g-1, respectively. CoFe2O4@MIL-53(Al) was selected to optimize Cong red treatment using Box-Behnken experimental design. The outcomes showed that CoFe2O4@MIL-53(Al) achieved the highest experimental uptake capacity of 35.919 mg g-1 at concentration (29.966 mg L-1), time (14.926 min), and dosage (0.486 g L-1). CoFe2O4@MIL-53(Al) could treat dye mixture (methylene blue, methyl orange, Congo red, malachite green, and crystal violet) with an outstanding removal efficiency of 81.24% for 30 min, and could be reused up to five cycles. Therefore, novel recyclable and stable CoFe2O4@MIL-53(Al) is recommended to integrate well with real dye treatments systems.
Assuntos
Estruturas Metalorgânicas , Nanocompostos , Poluentes Químicos da Água , Purificação da Água , Adsorção , Corantes/química , Vermelho Congo , Violeta Genciana , Azul de Metileno/química , Nanocompostos/química , Água , Poluentes Químicos da Água/químicaRESUMO
The present work focused on the synthesis of novel ZnLaxFe2-xO4 catalysts (x = 0, 0.01, 0.03, 0.05) and their utilization for the photocatalytic degradation of Rhodamine B dye. Structurally, the band gap energy of the catalysts tended to decrease (1.94-1.70 eV) with increasing the amount of La3+ dopant. ZnLa0.05Fe1.95O4 had an average particle size (40 nm), high surface area (41.07 m2 g-1) and large pore volume (0.186 cm3 g-1). Moreover, the effect of doping ratio, reaction time, H2O2 concentration, catalyst loading on the treatment performance of La3+ substituted ZnFe2O4 nanocomposites was investigated. ZnLa0.05Fe1.95O4/H2O2 system exhibited the highest degradation efficiency of 99.5% and nonlinear pseudo first-order kinetic reaction rate (14.8 × 10-3 min-1) in the presence of visible light irradiation. The key role of reactive oxygen species involving â¢O2- and â¢OH radicals was well explained through the scavenger study. A plausible mechanism of the degradation of Rhodamine B dye was also proposed. Due to two advantageous points including high recyclability (up to 4 cycles) and stability, La3+ substituted ZnFe2O4 nanocomposites can be an effective and competitive catalyst for the visible light-driven photodegradation of toxic dyes in the real wastewaters.
RESUMO
Pollution and diseases such as the coronavirus pandemic (COVID-19) are major issues that may be solved partly by nanotechnology. Here we review the synthesis of ZrO2 nanoparticles and their nanocomposites using compounds from bacteria, fungi, microalgae, and plants. For instance, bacteria, microalgae, and fungi secret bioactive metabolites such as fucoidans, digestive enzymes, and proteins, while plant tissues are rich in reducing sugars, polyphenols, flavonoids, saponins, and amino acids. These compounds allow reducing, capping, chelating, and stabilizing during the transformation of Zr4+ into ZrO2 nanoparticles. Green ZrO2 nanoparticles display unique properties such as a nanoscale size of 5-50 nm, diverse morphologies, e.g. nanospheres, nanorods and nanochains, and wide bandgap energy of 3.7-5.5 eV. Their high stability and biocompatibility are suitable biomedical and environmental applications, such as pathogen and cancer inactivation, and pollutant removal. Emerging applications of green ZrO2-based nanocomposites include water treatment, catalytic reduction, nanoelectronic devices, and anti-biofilms.
RESUMO
Water contamination is an environmental burden for the next generations, calling for advanced methods such as adsorption to remove pollutants. For instance, unwanted biowaste and invasive plants can be converted into biosorbents for environmental remediation. This would partly solve the negative effects of invasive plants, estimated at 120 billion dollars in the USA. Here we review the distribution, impact, and use of invasive plants for water treatment, with emphasis on the preparation of biosorbents and removal of pollutants such as cadmium, lead, copper, zinc, nickel, mercury, chromate, synthetic dyes, and fossil fuels. Those biosorbents can remove 90-99% heavy metals from aqueous solutions. High adsorption capacities of 476.190 mg/g for synthetic dyes and 211 g/g for diesel oils have been observed. We also discuss the regeneration of these biosorbents.
RESUMO
Because many engineered nanoparticles are toxic, there is a need for methods to fabricate safe nanoparticles such as plant-based nanoparticles. Indeed, plant extracts contain flavonoids, amino acids, proteins, polysaccharides, enzymes, polyphenols, steroids, and reducing sugars that facilitate the reduction, formation, and stabilization of nanoparticles. Moreover, synthesizing nanoparticles from plant extracts is fast, safe, and cost-effective because it does not consume much energy, and non-toxic derivatives are generated. These nanoparticles have diverse and unique properties of interest for applications in many fields. Here, we review the synthesis of metal/metal oxide nanoparticles with plant extracts. These nanoparticles display antibacterial, antifungal, anticancer, and antioxidant properties. Plant-based nanoparticles are also useful for medical diagnosis and drug delivery.
RESUMO
Chloramphenicol is a broad-spectrum bacterial antibiotic used against conjunctivitis, meningitis, plague, cholera, and typhoid fever. As a consequence, chloramphenicol ends up polluting the aquatic environment, wastewater treatment plants, and hospital wastewaters, thus disrupting ecosystems and inducing microbial resistance. Here, we review the occurrence, toxicity, and removal of chloramphenicol with emphasis on adsorption techniques. We present the adsorption performance of adsorbents such as biochar, activated carbon, porous carbon, metal-organic framework, composites, zeolites, minerals, molecularly imprinted polymers, and multi-walled carbon nanotubes. The effect of dose, pH, temperature, initial concentration, and contact time is discussed. Adsorption is controlled by π-π interactions, donor-acceptor interactions, hydrogen bonding, and electrostatic interactions. We also discuss isotherms, kinetics, thermodynamic data, selection of eluents, desorption efficiency, and regeneration of adsorbents. Porous carbon-based adsorbents exhibit excellent adsorption capacities of 500-1240 mg g-1. Most adsorbents can be reused over at least four cycles.
RESUMO
BACKGROUND: Tumor budding (Bd) has been demonstrated to be a promising prognostic factor in many carcinomas and in gastric cancer. It may represent an optimal additional parameter that is helpful for risk stratification in gastric adenocarcinoma. Hence, the present research was designed to predict the survival outcomes of gastric cancer in Vietnam, applying the tumor budding criteria of the International Tumor Budding Consensus Conference (ITBCC) 2016. METHODS: The present study was conducted on 109 gastric cancer patients who underwent surgery but did not receive neo-adjuvant chemotherapy from 2012 to 2015. The patients' clinicopathological features were recorded. Bd was evaluated according to the 2016 ITBCC criteria and classified as Bd1 (0-4 buds), Bd2 (5-9 buds), and Bd3 (≥10 buds) grades, in addition to being categorized into 2 main Bd groups: low (<10 buds) and high (≥10 buds) Bd. Kaplan-Meier and log-rank models were applied to analyze survival proportions. RESULTS: Of all the patients, 22.9% were classified as Bd1, 31.2% as Bd2, and 45.9% as Bd3 grades. Furthermore, 54.1% patients were categorized into the low and 45.9% into the high Bd groups. Patients with Bd1 and Bd2 grades (the low Bd group) exhibited the best prognosis, with 5-year overall survival (OS) rates of 85.7%, 90.8%, and90.3%, respectively. Patients with Bd3 grade (the high Bd group exhibited the worst prognosis, and none of them lived for 5 years (p < 0.001). Similar to OS rates, disease-free survival (DFS) rates markedly reduced from the Bd1 to Bd3 grade: Bd1, 95.0%; Bd2, 84.7%; and Bd3, 0% (p < 0.001). CONCLUSION: Patients with different gastric cancer Bd grades exhibited significantly different OS and DFS rates. The present study findings suggest that the ITBCC criteria can be used to stratify Bd for the treatment and prognosis of gastric cancer patients in Vietnam.
Assuntos
Carcinoma/mortalidade , Recidiva Local de Neoplasia/epidemiologia , Neoplasias Gástricas/mortalidade , Estômago/patologia , Adulto , Idoso , Idoso de 80 Anos ou mais , Protocolos de Quimioterapia Combinada Antineoplásica/uso terapêutico , Capecitabina/uso terapêutico , Carcinoma/patologia , Carcinoma/terapia , Quimioterapia Adjuvante/métodos , Intervalo Livre de Doença , Feminino , Seguimentos , Gastrectomia , Humanos , Estimativa de Kaplan-Meier , Masculino , Pessoa de Meia-Idade , Recidiva Local de Neoplasia/patologia , Oxaloacetatos/uso terapêutico , Prognóstico , Estudos Retrospectivos , Medição de Risco/métodos , Estômago/cirurgia , Neoplasias Gástricas/patologia , Neoplasias Gástricas/terapia , Vietnã/epidemiologiaRESUMO
Aquatic contamination of diclofenac (DCF), an emergent non-steroidal anti-inflammatory drug (NSAIDs), can result in adverse effects to many ecosystems through biomagnification. Hence, introducing effective remediation techniques to sequester the pharmaceutical wastes is highly fundamental to prevent their accumulation in the environment. Generally, adsorption has been presented as a green and efficient approach. Herein, we report the characterization and application of the novel magnetic nanocomposite (GO@CoFe2O4) derived from cobalt-based ferrite (CoFe2O4) and graphene oxide (GO) for DCF adsorption. For the optimization procedure, the response surface methodology (RSM) was adopted to investigate the impacts of DCF concentration (1.6-18.4 mg/L), DCF dosage (0.08-0.92 g/L), and solution pH (2.6-9.4) to find the optimum conditions for DCF removal, at 10.5 mg/L, 0.74 g/L, and pH 4, respectively. For the adsorption experiments, the kinetic, isotherm, thermodynamic, and intraparticle diffusion models were systematically studied. Moreover, we have elucidated the role of functional groups on the surface of GO@CoFe2O4 in enhancing the adsorption of DCF drug. With good removal efficiency (up to 86.1%), high maximum adsorption capacity (32.4 mg/g), GO@CoFe2O4 can be a potential candidate to eliminate DCF drug from water.
Assuntos
Grafite , Nanocompostos , Poluentes Químicos da Água , Adsorção , Diclofenaco , EcossistemaRESUMO
The population size and projected demographics of Vietnam's 2 largest cities, Ho Chi Minh City (HCMC) and Hanoi, will change dramatically over the next decade. Demographic changes in an aging population coupled with income growth and changes in lifestyle will result in a very different distribution of common cancers in the future. The study aimed to project the number of cancer incidence in the 2 largest populated cities in Vietnam for the year 2025. Cancer incidence data from 2004 to 2013 collected from population-based cancer registries in these 2 cities were provided by Vietnam National Cancer Institute. Incidence cases in 2013 and the previous decades average annual percent changes of age-standardized cancer incidence rates combined with expected population growth were modeled to project cancer incidence for each cancer site by gender to 2025. A substantial double in cancer incidence from 2013 to 2025 resulted from a growing and aging population in HCMC and Hanoi. Lung, colorectum, breast, thyroid, and liver cancers, which represent 67% of the overall cancer burden, are projected to become the leading cancer diagnoses by 2025 regardless of genders. For men, the leading cancer sites in 2025 are predicted to be lung, colorectum, esophagus, liver, and pharynx cancer, and among women, they are expected to be breast, thyroid, colorectum, lung, and cervical cancer. We projected an epidemiological transition from infectious-associated cancers to a high burden of cancers that have mainly been attributed to lifestyle in both cities. We predicted that with 16.9% growth in the overall population and dramatic aging with these 2 urban centers, the burdens of cancer incidence will increase sharply in both cities over the next decades. Data on projections of cancer incidence in both cities provide useful insights for directing appropriate policies and cancer control programs in Vietnam.
Assuntos
Previsões , Neoplasias/epidemiologia , Dinâmica Populacional/tendências , Adolescente , Adulto , Distribuição por Idade , Idoso , Idoso de 80 Anos ou mais , Envelhecimento , Criança , Pré-Escolar , Cidades/epidemiologia , Cidades/estatística & dados numéricos , Feminino , Humanos , Incidência , Lactente , Recém-Nascido , Modelos Lineares , Masculino , Pessoa de Meia-Idade , Sistema de Registros/estatística & dados numéricos , Fatores de Risco , Vietnã/epidemiologia , Adulto JovemRESUMO
In this study, a minimum-run resolution IV and central composite design have been developed to optimize tetracycline removal efficiency over mesoporous carbon derived from the metal-organic framework MIL-53 (Fe) as a self-sacrificial template. Firstly, minimum-run resolution IV, powered by the Design-Expert program, was used as an efficient and reliable screening study for investigating a set of seven factors, these were: tetracycline concentration (A: 5-15 mg/g), dose of mesoporous carbons (MPC) (B: 0.05-0.15 g/L), initial pH level (C: 2-10), contact time (D: 1-3 h), temperature (E: 20-40 °C), shaking speed (F: 150-250 rpm), and Na+ ionic strength (G: 10-90 mM) at both low (-1) and high (+1) levels, for investigation of the data ranges. The 20-trial model was analyzed and assessed by Analysis of Variance (ANOVA) data, and diagnostic plots (e.g., the Pareto chart, and half-normal and normal probability plots). Based on minimum-run resolution IV, three factors, including tetracycline concentration (A), dose of MPC (B), and initial pH (C), were selected to carry out the optimization study using a central composite design. The proposed quadratic model was found to be statistically significant at the 95% confidence level due to a low P-value (<0.05), high R2 (0.9078), and the AP ratio (11.4), along with an abundance of diagnostic plots (3D response surfaces, Cook's distance, Box-Cox, DFFITS, Leverage versus run, residuals versus runs, and actual versus predicted). Under response surface methodology-optimized conditions (e.g., tetracycline concentration of 1.9 mg/g, MPC dose of 0.15 g/L, and pH level of 3.9), the highest tetracycline removal efficiency via confirmation tests reached up to 98.0%-99.7%. Also, kinetic intraparticle diffusion and isotherm models were systematically studied to interpret how tetracycline molecules were absorbed on an MPC structure. In particular, the adsorption mechanisms including "electrostatic attraction" and "π-π interaction" were proposed.
Assuntos
Carbono/química , Estruturas Metalorgânicas , Tetraciclina/química , Adsorção , Análise de Variância , Concentração de Íons de Hidrogênio , Cinética , Modelos Moleculares , Conformação Molecular , Estrutura Molecular , Porosidade , Temperatura , Poluentes Químicos da ÁguaRESUMO
Recently, there has been a notable rise in the prevalence of persistent pollutants in the environment, posing a significant hazard due to their toxicity and enduring nature. Conventional wastewater treatment methods employed in treatment plants rarely address these persistent pollutants adequately. Meanwhile, the concept of green synthesis has garnered considerable attention, owing to its environmentally friendly approach that utilizes fewer toxic chemicals and solvents. The utilization of materials derived from sustainable sources presents a promising avenue for solving pressing environmental concerns. Among the various sources of biological agents, plants stand out for their accessibility, eco-friendliness, and rich reserves of phytochemicals suitable for material synthesis. The plant extract-mediated synthesis of zinc oxide nanoparticles (ZnONPs) has emerged as a promising solution for applications in wastewater treatment. Thorough investigations into the factors influencing the properties of these green ZnONPs are essential to establish a detailed and reliable synthesis process. Major weaknesses inherent in ZnONPs can be addressed by changing the optical, magnetic, and interface properties through doping with various semiconductor materials. Consequently, research efforts to mitigate water pollution are being driven by both the future prospects and limitations of ZnO-based composites. This review underscores the recent advancements of plant extract-mediated ZnONP composites for water treatment.